1 files changed, 41 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
new file mode 100644
index 000000000000..d75a9d767022
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
@@ -0,0 +1,41 @@
+QCOM BAM DMA controller
+
+Required properties:
+- compatible: must contain "qcom,bam-v1.4.0" for MSM8974
+- reg: Address range for DMA registers
+- interrupts: Should contain the one interrupt shared by all channels
+- #dma-cells: must be <1>, the cell in the dmas property of the client device
+  represents the channel number
+- clocks: required clock
+- clock-names: must contain "bam_clk" entry
+- qcom,ee : indicates the active Execution Environment identifier (0-7) used in
+  the secure world.
+
+Example:
+
+        uart-bam: dma@f9984000 = {
+                compatible = "qcom,bam-v1.4.0";
+                reg = <0xf9984000 0x15000>;
+                interrupts = <0 94 0>;
+                clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
+                clock-names = "bam_clk";
+                #dma-cells = <1>;
+                qcom,ee = <0>;
+        };
+
+DMA clients must use the format described in the dma.txt file, using a two cell
+specifier for each channel.
+
+Example:
+        serial@f991e000 {
+                compatible = "qcom,msm-uart";
+                reg = <0xf991e000 0x1000>
+                        <0xf9944000 0x19000>;
+                interrupts = <0 108 0>;
+                clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+                        <&gcc GCC_BLSP1_AHB_CLK>;
+                clock-names = "core", "iface";
+
+                dmas = <&uart-bam 0>, <&uart-bam 1>;
+                dma-names = "rx", "tx";
+        };