aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/boot/dts/Makefile1
-rw-r--r--arch/arm/boot/dts/at91-sama5d3_xplained.dts229
2 files changed, 230 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b9d6a8b485e0..6d1e43d46187 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
38dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb 38dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
39dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb 39dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
40# sama5d3 40# sama5d3
41dtb-$(CONFIG_ARCH_AT91) += at91-sama5d3_xplained.dtb
41dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb 42dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb
42dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb 43dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb
43dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb 44dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
new file mode 100644
index 000000000000..ce1375595e5f
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -0,0 +1,229 @@
1/*
2 * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
3 *
4 * Copyright (C) 2014 Atmel,
5 * 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
6 *
7 * Licensed under GPLv2 or later.
8 */
9/dts-v1/;
10#include "sama5d36.dtsi"
11
12/ {
13 model = "SAMA5D3 Xplained";
14 compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
15
16 chosen {
17 bootargs = "console=ttyS0,115200";
18 };
19
20 memory {
21 reg = <0x20000000 0x10000000>;
22 };
23
24 ahb {
25 apb {
26 mmc0: mmc@f0000000 {
27 pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
28 status = "okay";
29 slot@0 {
30 reg = <0>;
31 bus-width = <8>;
32 cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
33 };
34 };
35
36 spi0: spi@f0004000 {
37 cs-gpios = <&pioD 13 0>;
38 status = "okay";
39 };
40
41 can0: can@f000c000 {
42 status = "okay";
43 };
44
45 i2c0: i2c@f0014000 {
46 status = "okay";
47 };
48
49 i2c1: i2c@f0018000 {
50 status = "okay";
51 };
52
53 macb0: ethernet@f0028000 {
54 phy-mode = "rgmii";
55 status = "okay";
56 };
57
58 usart0: serial@f001c000 {
59 status = "okay";
60 };
61
62 usart1: serial@f0020000 {
63 pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
64 status = "okay";
65 };
66
67 uart0: serial@f0024000 {
68 status = "okay";
69 };
70
71 mmc1: mmc@f8000000 {
72 pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
73 status = "okay";
74 slot@0 {
75 reg = <0>;
76 bus-width = <4>;
77 cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
78 };
79 };
80
81 spi1: spi@f8008000 {
82 cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>;
83 status = "okay";
84 };
85
86 adc0: adc@f8018000 {
87 pinctrl-0 = <
88 &pinctrl_adc0_adtrg
89 &pinctrl_adc0_ad0
90 &pinctrl_adc0_ad1
91 &pinctrl_adc0_ad2
92 &pinctrl_adc0_ad3
93 &pinctrl_adc0_ad4
94 &pinctrl_adc0_ad5
95 &pinctrl_adc0_ad6
96 &pinctrl_adc0_ad7
97 &pinctrl_adc0_ad8
98 &pinctrl_adc0_ad9
99 >;
100 status = "okay";
101 };
102
103 i2c2: i2c@f801c000 {
104 dmas = <0>, <0>; /* Do not use DMA for i2c2 */
105 status = "okay";
106 };
107
108 macb1: ethernet@f802c000 {
109 phy-mode = "rmii";
110 status = "okay";
111 };
112
113 dbgu: serial@ffffee00 {
114 status = "okay";
115 };
116
117 pinctrl@fffff200 {
118 board {
119 pinctrl_mmc0_cd: mmc0_cd {
120 atmel,pins =
121 <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
122 };
123
124 pinctrl_mmc1_cd: mmc1_cd {
125 atmel,pins =
126 <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
127 };
128
129 pinctrl_usba_vbus: usba_vbus {
130 atmel,pins =
131 <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */
132 };
133 };
134 };
135
136 pmc: pmc@fffffc00 {
137 main: mainck {
138 clock-frequency = <12000000>;
139 };
140 };
141 };
142
143 nand0: nand@60000000 {
144 nand-bus-width = <8>;
145 nand-ecc-mode = "hw";
146 atmel,has-pmecc;
147 atmel,pmecc-cap = <4>;
148 atmel,pmecc-sector-size = <512>;
149 nand-on-flash-bbt;
150 status = "okay";
151
152 at91bootstrap@0 {
153 label = "at91bootstrap";
154 reg = <0x0 0x40000>;
155 };
156
157 bootloader@40000 {
158 label = "bootloader";
159 reg = <0x40000 0x80000>;
160 };
161
162 bootloaderenv@c0000 {
163 label = "bootloader env";
164 reg = <0xc0000 0xc0000>;
165 };
166
167 dtb@180000 {
168 label = "device tree";
169 reg = <0x180000 0x80000>;
170 };
171
172 kernel@200000 {
173 label = "kernel";
174 reg = <0x200000 0x600000>;
175 };
176
177 rootfs@800000 {
178 label = "rootfs";
179 reg = <0x800000 0x0f800000>;
180 };
181 };
182
183 usb0: gadget@00500000 {
184 atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */
185 pinctrl-names = "default";
186 pinctrl-0 = <&pinctrl_usba_vbus>;
187 status = "okay";
188 };
189
190 usb1: ohci@00600000 {
191 num-ports = <3>;
192 atmel,vbus-gpio = <0
193 &pioE 3 GPIO_ACTIVE_LOW
194 &pioE 4 GPIO_ACTIVE_LOW
195 >;
196 status = "okay";
197 };
198
199 usb2: ehci@00700000 {
200 status = "okay";
201 };
202 };
203
204 gpio_keys {
205 compatible = "gpio-keys";
206
207 bp3 {
208 label = "PB_USER";
209 gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
210 linux,code = <0x104>;
211 gpio-key,wakeup;
212 };
213 };
214
215 leds {
216 compatible = "gpio-leds";
217
218 d2 {
219 label = "d2";
220 gpios = <&pioE 23 GPIO_ACTIVE_LOW>; /* PE23, conflicts with A23, CTS2 */
221 linux,default-trigger = "heartbeat";
222 };
223
224 d3 {
225 label = "d3";
226 gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
227 };
228 };
229};
generated by cgit v1.2.2 (git 2.25.0) at 2026-01-01 10:04:55 -0500