diff options
-rw-r--r-- | arch/arm/boot/dts/imx53-tqma53.dtsi | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi new file mode 100644 index 000000000000..8278ec5ec222 --- /dev/null +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi | |||
@@ -0,0 +1,172 @@ | |||
1 | /* | ||
2 | * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix | ||
3 | * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix | ||
4 | * | ||
5 | * The code contained herein is licensed under the GNU General Public | ||
6 | * License. You may obtain a copy of the GNU General Public License | ||
7 | * Version 2 or later at the following locations: | ||
8 | * | ||
9 | * http://www.opensource.org/licenses/gpl-license.html | ||
10 | * http://www.gnu.org/copyleft/gpl.html | ||
11 | */ | ||
12 | |||
13 | /include/ "imx53.dtsi" | ||
14 | |||
15 | / { | ||
16 | model = "TQ TQMa53"; | ||
17 | compatible = "tq,tqma53", "fsl,imx53"; | ||
18 | |||
19 | memory { | ||
20 | reg = <0x70000000 0x40000000>; /* Up to 1GiB */ | ||
21 | }; | ||
22 | |||
23 | regulators { | ||
24 | compatible = "simple-bus"; | ||
25 | |||
26 | reg_3p3v: 3p3v { | ||
27 | compatible = "regulator-fixed"; | ||
28 | regulator-name = "3P3V"; | ||
29 | regulator-min-microvolt = <3300000>; | ||
30 | regulator-max-microvolt = <3300000>; | ||
31 | regulator-always-on; | ||
32 | }; | ||
33 | }; | ||
34 | }; | ||
35 | |||
36 | &esdhc2 { | ||
37 | pinctrl-names = "default"; | ||
38 | pinctrl-0 = <&pinctrl_esdhc2_1>; | ||
39 | wp-gpios = <&gpio1 2 0>; | ||
40 | cd-gpios = <&gpio1 4 0>; | ||
41 | status = "disabled"; | ||
42 | }; | ||
43 | |||
44 | &uart3 { | ||
45 | pinctrl-names = "default"; | ||
46 | pinctrl-0 = <&pinctrl_uart3_2>; | ||
47 | status = "disabled"; | ||
48 | }; | ||
49 | |||
50 | &ecspi1 { | ||
51 | pinctrl-names = "default"; | ||
52 | pinctrl-0 = <&pinctrl_ecspi1_1>; | ||
53 | fsl,spi-num-chipselects = <4>; | ||
54 | cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, | ||
55 | <&gpio3 24 0>, <&gpio3 25 0>; | ||
56 | status = "disabled"; | ||
57 | }; | ||
58 | |||
59 | &esdhc3 { /* EMMC */ | ||
60 | pinctrl-names = "default"; | ||
61 | pinctrl-0 = <&pinctrl_esdhc3_1>; | ||
62 | vmmc-supply = <®_3p3v>; | ||
63 | non-removable; | ||
64 | bus-width = <8>; | ||
65 | status = "okay"; | ||
66 | }; | ||
67 | |||
68 | &iomuxc { | ||
69 | pinctrl-names = "default"; | ||
70 | pinctrl-0 = <&pinctrl_hog>; | ||
71 | |||
72 | i2s { | ||
73 | pinctrl_i2s_1: i2s-grp1 { | ||
74 | fsl,pins = < | ||
75 | 1 0x10000 /* I2S_MCLK */ | ||
76 | 10 0x10000 /* I2S_SCLK */ | ||
77 | 17 0x10000 /* I2S_DOUT */ | ||
78 | 23 0x10000 /* I2S_LRCLK*/ | ||
79 | 30 0x10000 /* I2S_DIN */ | ||
80 | >; | ||
81 | }; | ||
82 | }; | ||
83 | |||
84 | hog { | ||
85 | pinctrl_hog: hoggrp { | ||
86 | fsl,pins = < | ||
87 | 610 0x10000 /* MX53_PAD_EIM_CS1__IPU_DI1_PIN6 (VSYNC)*/ | ||
88 | 711 0x10000 /* MX53_PAD_EIM_DA15__IPU_DI1_PIN4 (HSYNC)*/ | ||
89 | 873 0x10000 /* MX53_PAD_PATA_DA_1__GPIO7_7 (LCD_BLT_EN)*/ | ||
90 | 878 0x10000 /* MX53_PAD_PATA_DA_2__GPIO7_8 (LCD_RESET)*/ | ||
91 | 922 0x10000 /* MX53_PAD_PATA_DATA5__GPIO2_5 (LCD_POWER)*/ | ||
92 | 928 0x10000 /* MX53_PAD_PATA_DATA6__GPIO2_6 (PMIC_INT)*/ | ||
93 | 982 0x10000 /* MX53_PAD_PATA_DATA14__GPIO2_14 (CSI_RST)*/ | ||
94 | 989 0x10000 /* MX53_PAD_PATA_DATA15__GPIO2_15 (CSI_PWDN)*/ | ||
95 | 1069 0x10000 /* MX53_PAD_GPIO_0__GPIO1_0 (SYSTEM_DOWN)*/ | ||
96 | 1093 0x10000 /* MX53_PAD_GPIO_3__GPIO1_3 */ | ||
97 | >; | ||
98 | }; | ||
99 | }; | ||
100 | }; | ||
101 | |||
102 | &uart1 { | ||
103 | pinctrl-names = "default"; | ||
104 | pinctrl-0 = <&pinctrl_uart1_2>; | ||
105 | fsl,uart-has-rtscts; | ||
106 | status = "disabled"; | ||
107 | }; | ||
108 | |||
109 | &uart2 { | ||
110 | pinctrl-names = "default"; | ||
111 | pinctrl-0 = <&pinctrl_uart2_1>; | ||
112 | status = "disabled"; | ||
113 | }; | ||
114 | |||
115 | &can1 { | ||
116 | pinctrl-names = "default"; | ||
117 | pinctrl-0 = <&pinctrl_can1_2>; | ||
118 | status = "disabled"; | ||
119 | }; | ||
120 | |||
121 | &can2 { | ||
122 | pinctrl-names = "default"; | ||
123 | pinctrl-0 = <&pinctrl_can2_1>; | ||
124 | status = "disabled"; | ||
125 | }; | ||
126 | |||
127 | &i2c3 { | ||
128 | pinctrl-names = "default"; | ||
129 | pinctrl-0 = <&pinctrl_i2c3_1>; | ||
130 | status = "disabled"; | ||
131 | }; | ||
132 | |||
133 | &cspi { | ||
134 | pinctrl-names = "default"; | ||
135 | pinctrl-0 = <&pinctrl_cspi_1>; | ||
136 | fsl,spi-num-chipselects = <3>; | ||
137 | cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>, | ||
138 | <&gpio1 21 0>; | ||
139 | status = "disabled"; | ||
140 | }; | ||
141 | |||
142 | &i2c2 { | ||
143 | pinctrl-names = "default"; | ||
144 | pinctrl-0 = <&pinctrl_i2c2_1>; | ||
145 | status = "okay"; | ||
146 | |||
147 | pmic: mc34708@8 { | ||
148 | compatible = "fsl,mc34708"; | ||
149 | reg = <0x8>; | ||
150 | fsl,mc13xxx-uses-rtc; | ||
151 | interrupt-parent = <&gpio2>; | ||
152 | interrupts = <6 8>; /* PDATA_DATA6, low active */ | ||
153 | }; | ||
154 | |||
155 | sensor1: lm75@48 { | ||
156 | compatible = "lm75"; | ||
157 | reg = <0x48>; | ||
158 | }; | ||
159 | |||
160 | eeprom: 24c64@50 { | ||
161 | compatible = "at,24c64"; | ||
162 | pagesize = <32>; | ||
163 | reg = <0x50>; | ||
164 | }; | ||
165 | }; | ||
166 | |||
167 | &fec { | ||
168 | pinctrl-names = "default"; | ||
169 | pinctrl-0 = <&pinctrl_fec_1>; | ||
170 | phy-mode = "rmii"; | ||
171 | status = "disabled"; | ||
172 | }; | ||