aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/isdn/hardware/mISDN/Kconfig12
-rw-r--r--drivers/isdn/hardware/mISDN/Makefile1
-rw-r--r--drivers/isdn/hardware/mISDN/hfc_multi.h1204
-rw-r--r--drivers/isdn/hardware/mISDN/hfcmulti.c5320
-rw-r--r--include/linux/pci_ids.h33
5 files changed, 6570 insertions, 0 deletions
diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
index f62dc8752be9..14793480c453 100644
--- a/drivers/isdn/hardware/mISDN/Kconfig
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -11,3 +11,15 @@ config MISDN_HFCPCI
11 Enable support for cards with Cologne Chip AG's 11 Enable support for cards with Cologne Chip AG's
12 HFC PCI chip. 12 HFC PCI chip.
13 13
14config MISDN_HFCMULTI
15 tristate "Support for HFC multiport cards (HFC-4S/8S/E1)"
16 depends on PCI
17 depends on MISDN
18 help
19 Enable support for cards with Cologne Chip AG's HFC multiport
20 chip. There are three types of chips that are quite similar,
21 but the interface is different:
22 * HFC-4S (4 S/T interfaces on one chip)
23 * HFC-8S (8 S/T interfaces on one chip)
24 * HFC-E1 (E1 interface for 2Mbit ISDN)
25
diff --git a/drivers/isdn/hardware/mISDN/Makefile b/drivers/isdn/hardware/mISDN/Makefile
index 6f20a40b9d54..1e7ca5332ad7 100644
--- a/drivers/isdn/hardware/mISDN/Makefile
+++ b/drivers/isdn/hardware/mISDN/Makefile
@@ -4,3 +4,4 @@
4# 4#
5 5
6obj-$(CONFIG_MISDN_HFCPCI) += hfcpci.o 6obj-$(CONFIG_MISDN_HFCPCI) += hfcpci.o
7obj-$(CONFIG_MISDN_HFCMULTI) += hfcmulti.o
diff --git a/drivers/isdn/hardware/mISDN/hfc_multi.h b/drivers/isdn/hardware/mISDN/hfc_multi.h
new file mode 100644
index 000000000000..a33d87afc843
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfc_multi.h
@@ -0,0 +1,1204 @@
1/*
2 * see notice in hfc_multi.c
3 */
4
5extern void ztdummy_extern_interrupt(void);
6extern void ztdummy_register_interrupt(void);
7extern int ztdummy_unregister_interrupt(void);
8
9#define DEBUG_HFCMULTI_FIFO 0x00010000
10#define DEBUG_HFCMULTI_CRC 0x00020000
11#define DEBUG_HFCMULTI_INIT 0x00040000
12#define DEBUG_HFCMULTI_PLXSD 0x00080000
13#define DEBUG_HFCMULTI_MODE 0x00100000
14#define DEBUG_HFCMULTI_MSG 0x00200000
15#define DEBUG_HFCMULTI_STATE 0x00400000
16#define DEBUG_HFCMULTI_SYNC 0x01000000
17#define DEBUG_HFCMULTI_DTMF 0x02000000
18#define DEBUG_HFCMULTI_LOCK 0x80000000
19
20#define PCI_ENA_REGIO 0x01
21#define PCI_ENA_MEMIO 0x02
22
23/*
24 * NOTE: some registers are assigned multiple times due to different modes
25 * also registers are assigned differen for HFC-4s/8s and HFC-E1
26 */
27
28/*
29#define MAX_FRAME_SIZE 2048
30*/
31
32struct hfc_chan {
33 struct dchannel *dch; /* link if channel is a D-channel */
34 struct bchannel *bch; /* link if channel is a B-channel */
35 int port; /* the interface port this */
36 /* channel is associated with */
37 int nt_timer; /* -1 if off, 0 if elapsed, >0 if running */
38 int los, ais, slip_tx, slip_rx, rdi; /* current alarms */
39 int jitter;
40 u_long cfg; /* port configuration */
41 int sync; /* sync state (used by E1) */
42 u_int protocol; /* current protocol */
43 int slot_tx; /* current pcm slot */
44 int bank_tx; /* current pcm bank */
45 int slot_rx;
46 int bank_rx;
47 int conf; /* conference setting of TX slot */
48 int txpending; /* if there is currently data in */
49 /* the FIFO 0=no, 1=yes, 2=splloop */
50 int rx_off; /* set to turn fifo receive off */
51 int coeff_count; /* curren coeff block */
52 s32 *coeff; /* memory pointer to 8 coeff blocks */
53};
54
55
56struct hfcm_hw {
57 u_char r_ctrl;
58 u_char r_irq_ctrl;
59 u_char r_cirm;
60 u_char r_ram_sz;
61 u_char r_pcm_md0;
62 u_char r_irqmsk_misc;
63 u_char r_dtmf;
64 u_char r_st_sync;
65 u_char r_sci_msk;
66 u_char r_tx0, r_tx1;
67 u_char a_st_ctrl0[8];
68 timer_t timer;
69};
70
71
72/* for each stack these flags are used (cfg) */
73#define HFC_CFG_NONCAP_TX 1 /* S/T TX interface has less capacity */
74#define HFC_CFG_DIS_ECHANNEL 2 /* disable E-channel processing */
75#define HFC_CFG_REG_ECHANNEL 3 /* register E-channel */
76#define HFC_CFG_OPTICAL 4 /* the E1 interface is optical */
77#define HFC_CFG_REPORT_LOS 5 /* the card should report loss of signal */
78#define HFC_CFG_REPORT_AIS 6 /* the card should report alarm ind. sign. */
79#define HFC_CFG_REPORT_SLIP 7 /* the card should report bit slips */
80#define HFC_CFG_REPORT_RDI 8 /* the card should report remote alarm */
81#define HFC_CFG_DTMF 9 /* enable DTMF-detection */
82#define HFC_CFG_CRC4 10 /* disable CRC-4 Multiframe mode, */
83 /* use double frame instead. */
84
85#define HFC_CHIP_EXRAM_128 0 /* external ram 128k */
86#define HFC_CHIP_EXRAM_512 1 /* external ram 256k */
87#define HFC_CHIP_REVISION0 2 /* old fifo handling */
88#define HFC_CHIP_PCM_SLAVE 3 /* PCM is slave */
89#define HFC_CHIP_PCM_MASTER 4 /* PCM is master */
90#define HFC_CHIP_RX_SYNC 5 /* disable pll sync for pcm */
91#define HFC_CHIP_DTMF 6 /* DTMF decoding is enabled */
92#define HFC_CHIP_ULAW 7 /* ULAW mode */
93#define HFC_CHIP_CLOCK2 8 /* double clock mode */
94#define HFC_CHIP_E1CLOCK_GET 9 /* always get clock from E1 interface */
95#define HFC_CHIP_E1CLOCK_PUT 10 /* always put clock from E1 interface */
96#define HFC_CHIP_WATCHDOG 11 /* whether we should send signals */
97 /* to the watchdog */
98#define HFC_CHIP_B410P 12 /* whether we have a b410p with echocan in */
99 /* hw */
100#define HFC_CHIP_PLXSD 13 /* whether we have a Speech-Design PLX */
101
102#define HFC_IO_MODE_PCIMEM 0x00 /* normal memory mapped IO */
103#define HFC_IO_MODE_REGIO 0x01 /* PCI io access */
104#define HFC_IO_MODE_PLXSD 0x02 /* access HFC via PLX9030 */
105
106/* table entry in the PCI devices list */
107struct hm_map {
108 char *vendor_name;
109 char *card_name;
110 int type;
111 int ports;
112 int clock2;
113 int leds;
114 int opticalsupport;
115 int dip_type;
116 int io_mode;
117};
118
119struct hfc_multi {
120 struct list_head list;
121 struct hm_map *mtyp;
122 int id;
123 int pcm; /* id of pcm bus */
124 int type;
125 int ports;
126
127 u_int irq; /* irq used by card */
128 u_int irqcnt;
129 struct pci_dev *pci_dev;
130 int io_mode; /* selects mode */
131#ifdef HFC_REGISTER_DEBUG
132 void (*HFC_outb)(struct hfc_multi *hc, u_char reg,
133 u_char val, const char *function, int line);
134 void (*HFC_outb_nodebug)(struct hfc_multi *hc, u_char reg,
135 u_char val, const char *function, int line);
136 u_char (*HFC_inb)(struct hfc_multi *hc, u_char reg,
137 const char *function, int line);
138 u_char (*HFC_inb_nodebug)(struct hfc_multi *hc, u_char reg,
139 const char *function, int line);
140 u_short (*HFC_inw)(struct hfc_multi *hc, u_char reg,
141 const char *function, int line);
142 u_short (*HFC_inw_nodebug)(struct hfc_multi *hc, u_char reg,
143 const char *function, int line);
144 void (*HFC_wait)(struct hfc_multi *hc,
145 const char *function, int line);
146 void (*HFC_wait_nodebug)(struct hfc_multi *hc,
147 const char *function, int line);
148#else
149 void (*HFC_outb)(struct hfc_multi *hc, u_char reg,
150 u_char val);
151 void (*HFC_outb_nodebug)(struct hfc_multi *hc, u_char reg,
152 u_char val);
153 u_char (*HFC_inb)(struct hfc_multi *hc, u_char reg);
154 u_char (*HFC_inb_nodebug)(struct hfc_multi *hc, u_char reg);
155 u_short (*HFC_inw)(struct hfc_multi *hc, u_char reg);
156 u_short (*HFC_inw_nodebug)(struct hfc_multi *hc, u_char reg);
157 void (*HFC_wait)(struct hfc_multi *hc);
158 void (*HFC_wait_nodebug)(struct hfc_multi *hc);
159#endif
160 void (*read_fifo)(struct hfc_multi *hc, u_char *data,
161 int len);
162 void (*write_fifo)(struct hfc_multi *hc, u_char *data,
163 int len);
164 u_long pci_origmembase, plx_origmembase, dsp_origmembase;
165 u_char *pci_membase; /* PCI memory (MUST BE BYTE POINTER) */
166 u_char *plx_membase; /* PLX memory */
167 u_char *dsp_membase; /* DSP on PLX */
168 u_long pci_iobase; /* PCI IO */
169 struct hfcm_hw hw; /* remember data of write-only-registers */
170
171 u_long chip; /* chip configuration */
172 int masterclk; /* port that provides master clock -1=off */
173 int dtmf; /* flag that dtmf is currently in process */
174 int Flen; /* F-buffer size */
175 int Zlen; /* Z-buffer size (must be int for calculation)*/
176 int max_trans; /* maximum transparent fifo fill */
177 int Zmin; /* Z-buffer offset */
178 int DTMFbase; /* base address of DTMF coefficients */
179
180 u_int slots; /* number of PCM slots */
181 u_int leds; /* type of leds */
182 u_int ledcount; /* used to animate leds */
183 u_long ledstate; /* save last state of leds */
184 int opticalsupport; /* has the e1 board */
185 /* an optical Interface */
186 int dslot; /* channel # of d-channel (E1) default 16 */
187
188 u_long wdcount; /* every 500 ms we need to */
189 /* send the watchdog a signal */
190 u_char wdbyte; /* watchdog toggle byte */
191 u_int activity[8]; /* if there is any action on this */
192 /* port (will be cleared after */
193 /* showing led-states) */
194 int e1_state; /* keep track of last state */
195 int e1_getclock; /* if sync is retrieved from interface */
196 int syncronized; /* keep track of existing sync interface */
197 int e1_resync; /* resync jobs */
198
199 spinlock_t lock; /* the lock */
200
201 /*
202 * the channel index is counted from 0, regardless where the channel
203 * is located on the hfc-channel.
204 * the bch->channel is equvalent to the hfc-channel
205 */
206 struct hfc_chan chan[32];
207 u_char created[8]; /* what port is created */
208 signed char slot_owner[256]; /* owner channel of slot */
209};
210
211/* PLX GPIOs */
212#define PLX_GPIO4_DIR_BIT 13
213#define PLX_GPIO4_BIT 14
214#define PLX_GPIO5_DIR_BIT 16
215#define PLX_GPIO5_BIT 17
216#define PLX_GPIO6_DIR_BIT 19
217#define PLX_GPIO6_BIT 20
218#define PLX_GPIO7_DIR_BIT 22
219#define PLX_GPIO7_BIT 23
220#define PLX_GPIO8_DIR_BIT 25
221#define PLX_GPIO8_BIT 26
222
223#define PLX_GPIO4 (1 << PLX_GPIO4_BIT)
224#define PLX_GPIO5 (1 << PLX_GPIO5_BIT)
225#define PLX_GPIO6 (1 << PLX_GPIO6_BIT)
226#define PLX_GPIO7 (1 << PLX_GPIO7_BIT)
227#define PLX_GPIO8 (1 << PLX_GPIO8_BIT)
228
229#define PLX_GPIO4_DIR (1 << PLX_GPIO4_DIR_BIT)
230#define PLX_GPIO5_DIR (1 << PLX_GPIO5_DIR_BIT)
231#define PLX_GPIO6_DIR (1 << PLX_GPIO6_DIR_BIT)
232#define PLX_GPIO7_DIR (1 << PLX_GPIO7_DIR_BIT)
233#define PLX_GPIO8_DIR (1 << PLX_GPIO8_DIR_BIT)
234
235#define PLX_TERM_ON PLX_GPIO7
236#define PLX_SLAVE_EN_N PLX_GPIO5
237#define PLX_MASTER_EN PLX_GPIO6
238#define PLX_SYNC_O_EN PLX_GPIO4
239#define PLX_DSP_RES_N PLX_GPIO8
240/* GPIO4..8 Enable & Set to OUT, SLAVE_EN_N = 1 */
241#define PLX_GPIOC_INIT (PLX_GPIO4_DIR | PLX_GPIO5_DIR | PLX_GPIO6_DIR \
242 | PLX_GPIO7_DIR | PLX_GPIO8_DIR | PLX_SLAVE_EN_N)
243
244/* PLX Interrupt Control/STATUS */
245#define PLX_INTCSR_LINTI1_ENABLE 0x01
246#define PLX_INTCSR_LINTI1_STATUS 0x04
247#define PLX_INTCSR_LINTI2_ENABLE 0x08
248#define PLX_INTCSR_LINTI2_STATUS 0x20
249#define PLX_INTCSR_PCIINT_ENABLE 0x40
250
251/* PLX Registers */
252#define PLX_INTCSR 0x4c
253#define PLX_CNTRL 0x50
254#define PLX_GPIOC 0x54
255
256
257/*
258 * REGISTER SETTING FOR HFC-4S/8S AND HFC-E1
259 */
260
261/* write only registers */
262#define R_CIRM 0x00
263#define R_CTRL 0x01
264#define R_BRG_PCM_CFG 0x02
265#define R_RAM_ADDR0 0x08
266#define R_RAM_ADDR1 0x09
267#define R_RAM_ADDR2 0x0A
268#define R_FIRST_FIFO 0x0B
269#define R_RAM_SZ 0x0C
270#define R_FIFO_MD 0x0D
271#define R_INC_RES_FIFO 0x0E
272#define R_FSM_IDX 0x0F
273#define R_FIFO 0x0F
274#define R_SLOT 0x10
275#define R_IRQMSK_MISC 0x11
276#define R_SCI_MSK 0x12
277#define R_IRQ_CTRL 0x13
278#define R_PCM_MD0 0x14
279#define R_PCM_MD1 0x15
280#define R_PCM_MD2 0x15
281#define R_SH0H 0x15
282#define R_SH1H 0x15
283#define R_SH0L 0x15
284#define R_SH1L 0x15
285#define R_SL_SEL0 0x15
286#define R_SL_SEL1 0x15
287#define R_SL_SEL2 0x15
288#define R_SL_SEL3 0x15
289#define R_SL_SEL4 0x15
290#define R_SL_SEL5 0x15
291#define R_SL_SEL6 0x15
292#define R_SL_SEL7 0x15
293#define R_ST_SEL 0x16
294#define R_ST_SYNC 0x17
295#define R_CONF_EN 0x18
296#define R_TI_WD 0x1A
297#define R_BERT_WD_MD 0x1B
298#define R_DTMF 0x1C
299#define R_DTMF_N 0x1D
300#define R_E1_WR_STA 0x20
301#define R_E1_RD_STA 0x20
302#define R_LOS0 0x22
303#define R_LOS1 0x23
304#define R_RX0 0x24
305#define R_RX_FR0 0x25
306#define R_RX_FR1 0x26
307#define R_TX0 0x28
308#define R_TX1 0x29
309#define R_TX_FR0 0x2C
310
311#define R_TX_FR1 0x2D
312#define R_TX_FR2 0x2E
313#define R_JATT_ATT 0x2F /* undocumented */
314#define A_ST_RD_STATE 0x30
315#define A_ST_WR_STATE 0x30
316#define R_RX_OFF 0x30
317#define A_ST_CTRL0 0x31
318#define R_SYNC_OUT 0x31
319#define A_ST_CTRL1 0x32
320#define A_ST_CTRL2 0x33
321#define A_ST_SQ_WR 0x34
322#define R_TX_OFF 0x34
323#define R_SYNC_CTRL 0x35
324#define A_ST_CLK_DLY 0x37
325#define R_PWM0 0x38
326#define R_PWM1 0x39
327#define A_ST_B1_TX 0x3C
328#define A_ST_B2_TX 0x3D
329#define A_ST_D_TX 0x3E
330#define R_GPIO_OUT0 0x40
331#define R_GPIO_OUT1 0x41
332#define R_GPIO_EN0 0x42
333#define R_GPIO_EN1 0x43
334#define R_GPIO_SEL 0x44
335#define R_BRG_CTRL 0x45
336#define R_PWM_MD 0x46
337#define R_BRG_MD 0x47
338#define R_BRG_TIM0 0x48
339#define R_BRG_TIM1 0x49
340#define R_BRG_TIM2 0x4A
341#define R_BRG_TIM3 0x4B
342#define R_BRG_TIM_SEL01 0x4C
343#define R_BRG_TIM_SEL23 0x4D
344#define R_BRG_TIM_SEL45 0x4E
345#define R_BRG_TIM_SEL67 0x4F
346#define A_SL_CFG 0xD0
347#define A_CONF 0xD1
348#define A_CH_MSK 0xF4
349#define A_CON_HDLC 0xFA
350#define A_SUBCH_CFG 0xFB
351#define A_CHANNEL 0xFC
352#define A_FIFO_SEQ 0xFD
353#define A_IRQ_MSK 0xFF
354
355/* read only registers */
356#define A_Z12 0x04
357#define A_Z1L 0x04
358#define A_Z1 0x04
359#define A_Z1H 0x05
360#define A_Z2L 0x06
361#define A_Z2 0x06
362#define A_Z2H 0x07
363#define A_F1 0x0C
364#define A_F12 0x0C
365#define A_F2 0x0D
366#define R_IRQ_OVIEW 0x10
367#define R_IRQ_MISC 0x11
368#define R_IRQ_STATECH 0x12
369#define R_CONF_OFLOW 0x14
370#define R_RAM_USE 0x15
371#define R_CHIP_ID 0x16
372#define R_BERT_STA 0x17
373#define R_F0_CNTL 0x18
374#define R_F0_CNTH 0x19
375#define R_BERT_EC 0x1A
376#define R_BERT_ECL 0x1A
377#define R_BERT_ECH 0x1B
378#define R_STATUS 0x1C
379#define R_CHIP_RV 0x1F
380#define R_STATE 0x20
381#define R_SYNC_STA 0x24
382#define R_RX_SL0_0 0x25
383#define R_RX_SL0_1 0x26
384#define R_RX_SL0_2 0x27
385#define R_JATT_DIR 0x2b /* undocumented */
386#define R_SLIP 0x2c
387#define A_ST_RD_STA 0x30
388#define R_FAS_EC 0x30
389#define R_FAS_ECL 0x30
390#define R_FAS_ECH 0x31
391#define R_VIO_EC 0x32
392#define R_VIO_ECL 0x32
393#define R_VIO_ECH 0x33
394#define A_ST_SQ_RD 0x34
395#define R_CRC_EC 0x34
396#define R_CRC_ECL 0x34
397#define R_CRC_ECH 0x35
398#define R_E_EC 0x36
399#define R_E_ECL 0x36
400#define R_E_ECH 0x37
401#define R_SA6_SA13_EC 0x38
402#define R_SA6_SA13_ECL 0x38
403#define R_SA6_SA13_ECH 0x39
404#define R_SA6_SA23_EC 0x3A
405#define R_SA6_SA23_ECL 0x3A
406#define R_SA6_SA23_ECH 0x3B
407#define A_ST_B1_RX 0x3C
408#define A_ST_B2_RX 0x3D
409#define A_ST_D_RX 0x3E
410#define A_ST_E_RX 0x3F
411#define R_GPIO_IN0 0x40
412#define R_GPIO_IN1 0x41
413#define R_GPI_IN0 0x44
414#define R_GPI_IN1 0x45
415#define R_GPI_IN2 0x46
416#define R_GPI_IN3 0x47
417#define R_INT_DATA 0x88
418#define R_IRQ_FIFO_BL0 0xC8
419#define R_IRQ_FIFO_BL1 0xC9
420#define R_IRQ_FIFO_BL2 0xCA
421#define R_IRQ_FIFO_BL3 0xCB
422#define R_IRQ_FIFO_BL4 0xCC
423#define R_IRQ_FIFO_BL5 0xCD
424#define R_IRQ_FIFO_BL6 0xCE
425#define R_IRQ_FIFO_BL7 0xCF
426
427/* read and write registers */
428#define A_FIFO_DATA0 0x80
429#define A_FIFO_DATA1 0x80
430#define A_FIFO_DATA2 0x80
431#define A_FIFO_DATA0_NOINC 0x84
432#define A_FIFO_DATA1_NOINC 0x84
433#define A_FIFO_DATA2_NOINC 0x84
434#define R_RAM_DATA 0xC0
435
436
437/*
438 * BIT SETTING FOR HFC-4S/8S AND HFC-E1
439 */
440
441/* chapter 2: universal bus interface */
442/* R_CIRM */
443#define V_IRQ_SEL 0x01
444#define V_SRES 0x08
445#define V_HFCRES 0x10
446#define V_PCMRES 0x20
447#define V_STRES 0x40
448#define V_ETRES 0x40
449#define V_RLD_EPR 0x80
450/* R_CTRL */
451#define V_FIFO_LPRIO 0x02
452#define V_SLOW_RD 0x04
453#define V_EXT_RAM 0x08
454#define V_CLK_OFF 0x20
455#define V_ST_CLK 0x40
456/* R_RAM_ADDR0 */
457#define V_RAM_ADDR2 0x01
458#define V_ADDR_RES 0x40
459#define V_ADDR_INC 0x80
460/* R_RAM_SZ */
461#define V_RAM_SZ 0x01
462#define V_PWM0_16KHZ 0x10
463#define V_PWM1_16KHZ 0x20
464#define V_FZ_MD 0x80
465/* R_CHIP_ID */
466#define V_PNP_IRQ 0x01
467#define V_CHIP_ID 0x10
468
469/* chapter 3: data flow */
470/* R_FIRST_FIFO */
471#define V_FIRST_FIRO_DIR 0x01
472#define V_FIRST_FIFO_NUM 0x02
473/* R_FIFO_MD */
474#define V_FIFO_MD 0x01
475#define V_CSM_MD 0x04
476#define V_FSM_MD 0x08
477#define V_FIFO_SZ 0x10
478/* R_FIFO */
479#define V_FIFO_DIR 0x01
480#define V_FIFO_NUM 0x02
481#define V_REV 0x80
482/* R_SLOT */
483#define V_SL_DIR 0x01
484#define V_SL_NUM 0x02
485/* A_SL_CFG */
486#define V_CH_DIR 0x01
487#define V_CH_SEL 0x02
488#define V_ROUTING 0x40
489/* A_CON_HDLC */
490#define V_IFF 0x01
491#define V_HDLC_TRP 0x02
492#define V_TRP_IRQ 0x04
493#define V_DATA_FLOW 0x20
494/* A_SUBCH_CFG */
495#define V_BIT_CNT 0x01
496#define V_START_BIT 0x08
497#define V_LOOP_FIFO 0x40
498#define V_INV_DATA 0x80
499/* A_CHANNEL */
500#define V_CH_DIR0 0x01
501#define V_CH_NUM0 0x02
502/* A_FIFO_SEQ */
503#define V_NEXT_FIFO_DIR 0x01
504#define V_NEXT_FIFO_NUM 0x02
505#define V_SEQ_END 0x40
506
507/* chapter 4: FIFO handling and HDLC controller */
508/* R_INC_RES_FIFO */
509#define V_INC_F 0x01
510#define V_RES_F 0x02
511#define V_RES_LOST 0x04
512
513/* chapter 5: S/T interface */
514/* R_SCI_MSK */
515#define V_SCI_MSK_ST0 0x01
516#define V_SCI_MSK_ST1 0x02
517#define V_SCI_MSK_ST2 0x04
518#define V_SCI_MSK_ST3 0x08
519#define V_SCI_MSK_ST4 0x10
520#define V_SCI_MSK_ST5 0x20
521#define V_SCI_MSK_ST6 0x40
522#define V_SCI_MSK_ST7 0x80
523/* R_ST_SEL */
524#define V_ST_SEL 0x01
525#define V_MULT_ST 0x08
526/* R_ST_SYNC */
527#define V_SYNC_SEL 0x01
528#define V_AUTO_SYNC 0x08
529/* A_ST_WR_STA */
530#define V_ST_SET_STA 0x01
531#define V_ST_LD_STA 0x10
532#define V_ST_ACT 0x20
533#define V_SET_G2_G3 0x80
534/* A_ST_CTRL0 */
535#define V_B1_EN 0x01
536#define V_B2_EN 0x02
537#define V_ST_MD 0x04
538#define V_D_PRIO 0x08
539#define V_SQ_EN 0x10
540#define V_96KHZ 0x20
541#define V_TX_LI 0x40
542#define V_ST_STOP 0x80
543/* A_ST_CTRL1 */
544#define V_G2_G3_EN 0x01
545#define V_D_HI 0x04
546#define V_E_IGNO 0x08
547#define V_E_LO 0x10
548#define V_B12_SWAP 0x80
549/* A_ST_CTRL2 */
550#define V_B1_RX_EN 0x01
551#define V_B2_RX_EN 0x02
552#define V_ST_TRIS 0x40
553/* A_ST_CLK_DLY */
554#define V_ST_CK_DLY 0x01
555#define V_ST_SMPL 0x10
556/* A_ST_D_TX */
557#define V_ST_D_TX 0x40
558/* R_IRQ_STATECH */
559#define V_SCI_ST0 0x01
560#define V_SCI_ST1 0x02
561#define V_SCI_ST2 0x04
562#define V_SCI_ST3 0x08
563#define V_SCI_ST4 0x10
564#define V_SCI_ST5 0x20
565#define V_SCI_ST6 0x40
566#define V_SCI_ST7 0x80
567/* A_ST_RD_STA */
568#define V_ST_STA 0x01
569#define V_FR_SYNC_ST 0x10
570#define V_TI2_EXP 0x20
571#define V_INFO0 0x40
572#define V_G2_G3 0x80
573/* A_ST_SQ_RD */
574#define V_ST_SQ 0x01
575#define V_MF_RX_RDY 0x10
576#define V_MF_TX_RDY 0x80
577/* A_ST_D_RX */
578#define V_ST_D_RX 0x40
579/* A_ST_E_RX */
580#define V_ST_E_RX 0x40
581
582/* chapter 5: E1 interface */
583/* R_E1_WR_STA */
584/* R_E1_RD_STA */
585#define V_E1_SET_STA 0x01
586#define V_E1_LD_STA 0x10
587/* R_RX0 */
588#define V_RX_CODE 0x01
589#define V_RX_FBAUD 0x04
590#define V_RX_CMI 0x08
591#define V_RX_INV_CMI 0x10
592#define V_RX_INV_CLK 0x20
593#define V_RX_INV_DATA 0x40
594#define V_AIS_ITU 0x80
595/* R_RX_FR0 */
596#define V_NO_INSYNC 0x01
597#define V_AUTO_RESYNC 0x02
598#define V_AUTO_RECO 0x04
599#define V_SWORD_COND 0x08
600#define V_SYNC_LOSS 0x10
601#define V_XCRC_SYNC 0x20
602#define V_MF_RESYNC 0x40
603#define V_RESYNC 0x80
604/* R_RX_FR1 */
605#define V_RX_MF 0x01
606#define V_RX_MF_SYNC 0x02
607#define V_RX_SL0_RAM 0x04
608#define V_ERR_SIM 0x20
609#define V_RES_NMF 0x40
610/* R_TX0 */
611#define V_TX_CODE 0x01
612#define V_TX_FBAUD 0x04
613#define V_TX_CMI_CODE 0x08
614#define V_TX_INV_CMI_CODE 0x10
615#define V_TX_INV_CLK 0x20
616#define V_TX_INV_DATA 0x40
617#define V_OUT_EN 0x80
618/* R_TX1 */
619#define V_INV_CLK 0x01
620#define V_EXCHG_DATA_LI 0x02
621#define V_AIS_OUT 0x04
622#define V_ATX 0x20
623#define V_NTRI 0x40
624#define V_AUTO_ERR_RES 0x80
625/* R_TX_FR0 */
626#define V_TRP_FAS 0x01
627#define V_TRP_NFAS 0x02
628#define V_TRP_RAL 0x04
629#define V_TRP_SA 0x08
630/* R_TX_FR1 */
631#define V_TX_FAS 0x01
632#define V_TX_NFAS 0x02
633#define V_TX_RAL 0x04
634#define V_TX_SA 0x08
635/* R_TX_FR2 */
636#define V_TX_MF 0x01
637#define V_TRP_SL0 0x02
638#define V_TX_SL0_RAM 0x04
639#define V_TX_E 0x10
640#define V_NEG_E 0x20
641#define V_XS12_ON 0x40
642#define V_XS15_ON 0x80
643/* R_RX_OFF */
644#define V_RX_SZ 0x01
645#define V_RX_INIT 0x04
646/* R_SYNC_OUT */
647#define V_SYNC_E1_RX 0x01
648#define V_IPATS0 0x20
649#define V_IPATS1 0x40
650#define V_IPATS2 0x80
651/* R_TX_OFF */
652#define V_TX_SZ 0x01
653#define V_TX_INIT 0x04
654/* R_SYNC_CTRL */
655#define V_EXT_CLK_SYNC 0x01
656#define V_SYNC_OFFS 0x02
657#define V_PCM_SYNC 0x04
658#define V_NEG_CLK 0x08
659#define V_HCLK 0x10
660/*
661#define V_JATT_AUTO_DEL 0x20
662#define V_JATT_AUTO 0x40
663*/
664#define V_JATT_OFF 0x80
665/* R_STATE */
666#define V_E1_STA 0x01
667#define V_ALT_FR_RX 0x40
668#define V_ALT_FR_TX 0x80
669/* R_SYNC_STA */
670#define V_RX_STA 0x01
671#define V_FR_SYNC_E1 0x04
672#define V_SIG_LOS 0x08
673#define V_MFA_STA 0x10
674#define V_AIS 0x40
675#define V_NO_MF_SYNC 0x80
676/* R_RX_SL0_0 */
677#define V_SI_FAS 0x01
678#define V_SI_NFAS 0x02
679#define V_A 0x04
680#define V_CRC_OK 0x08
681#define V_TX_E1 0x10
682#define V_TX_E2 0x20
683#define V_RX_E1 0x40
684#define V_RX_E2 0x80
685/* R_SLIP */
686#define V_SLIP_RX 0x01
687#define V_FOSLIP_RX 0x08
688#define V_SLIP_TX 0x10
689#define V_FOSLIP_TX 0x80
690
691/* chapter 6: PCM interface */
692/* R_PCM_MD0 */
693#define V_PCM_MD 0x01
694#define V_C4_POL 0x02
695#define V_F0_NEG 0x04
696#define V_F0_LEN 0x08
697#define V_PCM_ADDR 0x10
698/* R_SL_SEL0 */
699#define V_SL_SEL0 0x01
700#define V_SH_SEL0 0x80
701/* R_SL_SEL1 */
702#define V_SL_SEL1 0x01
703#define V_SH_SEL1 0x80
704/* R_SL_SEL2 */
705#define V_SL_SEL2 0x01
706#define V_SH_SEL2 0x80
707/* R_SL_SEL3 */
708#define V_SL_SEL3 0x01
709#define V_SH_SEL3 0x80
710/* R_SL_SEL4 */
711#define V_SL_SEL4 0x01
712#define V_SH_SEL4 0x80
713/* R_SL_SEL5 */
714#define V_SL_SEL5 0x01
715#define V_SH_SEL5 0x80
716/* R_SL_SEL6 */
717#define V_SL_SEL6 0x01
718#define V_SH_SEL6 0x80
719/* R_SL_SEL7 */
720#define V_SL_SEL7 0x01
721#define V_SH_SEL7 0x80
722/* R_PCM_MD1 */
723#define V_ODEC_CON 0x01
724#define V_PLL_ADJ 0x04
725#define V_PCM_DR 0x10
726#define V_PCM_LOOP 0x40
727/* R_PCM_MD2 */
728#define V_SYNC_PLL 0x02
729#define V_SYNC_SRC 0x04
730#define V_SYNC_OUT 0x08
731#define V_ICR_FR_TIME 0x40
732#define V_EN_PLL 0x80
733
734/* chapter 7: pulse width modulation */
735/* R_PWM_MD */
736#define V_EXT_IRQ_EN 0x08
737#define V_PWM0_MD 0x10
738#define V_PWM1_MD 0x40
739
740/* chapter 8: multiparty audio conferences */
741/* R_CONF_EN */
742#define V_CONF_EN 0x01
743#define V_ULAW 0x80
744/* A_CONF */
745#define V_CONF_NUM 0x01
746#define V_NOISE_SUPPR 0x08
747#define V_ATT_LEV 0x20
748#define V_CONF_SL 0x80
749/* R_CONF_OFLOW */
750#define V_CONF_OFLOW0 0x01
751#define V_CONF_OFLOW1 0x02
752#define V_CONF_OFLOW2 0x04
753#define V_CONF_OFLOW3 0x08
754#define V_CONF_OFLOW4 0x10
755#define V_CONF_OFLOW5 0x20
756#define V_CONF_OFLOW6 0x40
757#define V_CONF_OFLOW7 0x80
758
759/* chapter 9: DTMF contoller */
760/* R_DTMF0 */
761#define V_DTMF_EN 0x01
762#define V_HARM_SEL 0x02
763#define V_DTMF_RX_CH 0x04
764#define V_DTMF_STOP 0x08
765#define V_CHBL_SEL 0x10
766#define V_RST_DTMF 0x40
767#define V_ULAW_SEL 0x80
768
769/* chapter 10: BERT */
770/* R_BERT_WD_MD */
771#define V_PAT_SEQ 0x01
772#define V_BERT_ERR 0x08
773#define V_AUTO_WD_RES 0x20
774#define V_WD_RES 0x80
775/* R_BERT_STA */
776#define V_BERT_SYNC_SRC 0x01
777#define V_BERT_SYNC 0x10
778#define V_BERT_INV_DATA 0x20
779
780/* chapter 11: auxiliary interface */
781/* R_BRG_PCM_CFG */
782#define V_BRG_EN 0x01
783#define V_BRG_MD 0x02
784#define V_PCM_CLK 0x20
785#define V_ADDR_WRDLY 0x40
786/* R_BRG_CTRL */
787#define V_BRG_CS 0x01
788#define V_BRG_ADDR 0x08
789#define V_BRG_CS_SRC 0x80
790/* R_BRG_MD */
791#define V_BRG_MD0 0x01
792#define V_BRG_MD1 0x02
793#define V_BRG_MD2 0x04
794#define V_BRG_MD3 0x08
795#define V_BRG_MD4 0x10
796#define V_BRG_MD5 0x20
797#define V_BRG_MD6 0x40
798#define V_BRG_MD7 0x80
799/* R_BRG_TIM0 */
800#define V_BRG_TIM0_IDLE 0x01
801#define V_BRG_TIM0_CLK 0x10
802/* R_BRG_TIM1 */
803#define V_BRG_TIM1_IDLE 0x01
804#define V_BRG_TIM1_CLK 0x10
805/* R_BRG_TIM2 */
806#define V_BRG_TIM2_IDLE 0x01
807#define V_BRG_TIM2_CLK 0x10
808/* R_BRG_TIM3 */
809#define V_BRG_TIM3_IDLE 0x01
810#define V_BRG_TIM3_CLK 0x10
811/* R_BRG_TIM_SEL01 */
812#define V_BRG_WR_SEL0 0x01
813#define V_BRG_RD_SEL0 0x04
814#define V_BRG_WR_SEL1 0x10
815#define V_BRG_RD_SEL1 0x40
816/* R_BRG_TIM_SEL23 */
817#define V_BRG_WR_SEL2 0x01
818#define V_BRG_RD_SEL2 0x04
819#define V_BRG_WR_SEL3 0x10
820#define V_BRG_RD_SEL3 0x40
821/* R_BRG_TIM_SEL45 */
822#define V_BRG_WR_SEL4 0x01
823#define V_BRG_RD_SEL4 0x04
824#define V_BRG_WR_SEL5 0x10
825#define V_BRG_RD_SEL5 0x40
826/* R_BRG_TIM_SEL67 */
827#define V_BRG_WR_SEL6 0x01
828#define V_BRG_RD_SEL6 0x04
829#define V_BRG_WR_SEL7 0x10
830#define V_BRG_RD_SEL7 0x40
831
832/* chapter 12: clock, reset, interrupt, timer and watchdog */
833/* R_IRQMSK_MISC */
834#define V_STA_IRQMSK 0x01
835#define V_TI_IRQMSK 0x02
836#define V_PROC_IRQMSK 0x04
837#define V_DTMF_IRQMSK 0x08
838#define V_IRQ1S_MSK 0x10
839#define V_SA6_IRQMSK 0x20
840#define V_RX_EOMF_MSK 0x40
841#define V_TX_EOMF_MSK 0x80
842/* R_IRQ_CTRL */
843#define V_FIFO_IRQ 0x01
844#define V_GLOB_IRQ_EN 0x08
845#define V_IRQ_POL 0x10
846/* R_TI_WD */
847#define V_EV_TS 0x01
848#define V_WD_TS 0x10
849/* A_IRQ_MSK */
850#define V_IRQ 0x01
851#define V_BERT_EN 0x02
852#define V_MIX_IRQ 0x04
853/* R_IRQ_OVIEW */
854#define V_IRQ_FIFO_BL0 0x01
855#define V_IRQ_FIFO_BL1 0x02
856#define V_IRQ_FIFO_BL2 0x04
857#define V_IRQ_FIFO_BL3 0x08
858#define V_IRQ_FIFO_BL4 0x10
859#define V_IRQ_FIFO_BL5 0x20
860#define V_IRQ_FIFO_BL6 0x40
861#define V_IRQ_FIFO_BL7 0x80
862/* R_IRQ_MISC */
863#define V_STA_IRQ 0x01
864#define V_TI_IRQ 0x02
865#define V_IRQ_PROC 0x04
866#define V_DTMF_IRQ 0x08
867#define V_IRQ1S 0x10
868#define V_SA6_IRQ 0x20
869#define V_RX_EOMF 0x40
870#define V_TX_EOMF 0x80
871/* R_STATUS */
872#define V_BUSY 0x01
873#define V_PROC 0x02
874#define V_DTMF_STA 0x04
875#define V_LOST_STA 0x08
876#define V_SYNC_IN 0x10
877#define V_EXT_IRQSTA 0x20
878#define V_MISC_IRQSTA 0x40
879#define V_FR_IRQSTA 0x80
880/* R_IRQ_FIFO_BL0 */
881#define V_IRQ_FIFO0_TX 0x01
882#define V_IRQ_FIFO0_RX 0x02
883#define V_IRQ_FIFO1_TX 0x04
884#define V_IRQ_FIFO1_RX 0x08
885#define V_IRQ_FIFO2_TX 0x10
886#define V_IRQ_FIFO2_RX 0x20
887#define V_IRQ_FIFO3_TX 0x40
888#define V_IRQ_FIFO3_RX 0x80
889/* R_IRQ_FIFO_BL1 */
890#define V_IRQ_FIFO4_TX 0x01
891#define V_IRQ_FIFO4_RX 0x02
892#define V_IRQ_FIFO5_TX 0x04
893#define V_IRQ_FIFO5_RX 0x08
894#define V_IRQ_FIFO6_TX 0x10
895#define V_IRQ_FIFO6_RX 0x20
896#define V_IRQ_FIFO7_TX 0x40
897#define V_IRQ_FIFO7_RX 0x80
898/* R_IRQ_FIFO_BL2 */
899#define V_IRQ_FIFO8_TX 0x01
900#define V_IRQ_FIFO8_RX 0x02
901#define V_IRQ_FIFO9_TX 0x04
902#define V_IRQ_FIFO9_RX 0x08
903#define V_IRQ_FIFO10_TX 0x10
904#define V_IRQ_FIFO10_RX 0x20
905#define V_IRQ_FIFO11_TX 0x40
906#define V_IRQ_FIFO11_RX 0x80
907/* R_IRQ_FIFO_BL3 */
908#define V_IRQ_FIFO12_TX 0x01
909#define V_IRQ_FIFO12_RX 0x02
910#define V_IRQ_FIFO13_TX 0x04
911#define V_IRQ_FIFO13_RX 0x08
912#define V_IRQ_FIFO14_TX 0x10
913#define V_IRQ_FIFO14_RX 0x20
914#define V_IRQ_FIFO15_TX 0x40
915#define V_IRQ_FIFO15_RX 0x80
916/* R_IRQ_FIFO_BL4 */
917#define V_IRQ_FIFO16_TX 0x01
918#define V_IRQ_FIFO16_RX 0x02
919#define V_IRQ_FIFO17_TX 0x04
920#define V_IRQ_FIFO17_RX 0x08
921#define V_IRQ_FIFO18_TX 0x10
922#define V_IRQ_FIFO18_RX 0x20
923#define V_IRQ_FIFO19_TX 0x40
924#define V_IRQ_FIFO19_RX 0x80
925/* R_IRQ_FIFO_BL5 */
926#define V_IRQ_FIFO20_TX 0x01
927#define V_IRQ_FIFO20_RX 0x02
928#define V_IRQ_FIFO21_TX 0x04
929#define V_IRQ_FIFO21_RX 0x08
930#define V_IRQ_FIFO22_TX 0x10
931#define V_IRQ_FIFO22_RX 0x20
932#define V_IRQ_FIFO23_TX 0x40
933#define V_IRQ_FIFO23_RX 0x80
934/* R_IRQ_FIFO_BL6 */
935#define V_IRQ_FIFO24_TX 0x01
936#define V_IRQ_FIFO24_RX 0x02
937#define V_IRQ_FIFO25_TX 0x04
938#define V_IRQ_FIFO25_RX 0x08
939#define V_IRQ_FIFO26_TX 0x10
940#define V_IRQ_FIFO26_RX 0x20
941#define V_IRQ_FIFO27_TX 0x40
942#define V_IRQ_FIFO27_RX 0x80
943/* R_IRQ_FIFO_BL7 */
944#define V_IRQ_FIFO28_TX 0x01
945#define V_IRQ_FIFO28_RX 0x02
946#define V_IRQ_FIFO29_TX 0x04
947#define V_IRQ_FIFO29_RX 0x08
948#define V_IRQ_FIFO30_TX 0x10
949#define V_IRQ_FIFO30_RX 0x20
950#define V_IRQ_FIFO31_TX 0x40
951#define V_IRQ_FIFO31_RX 0x80
952
953/* chapter 13: general purpose I/O pins (GPIO) and input pins (GPI) */
954/* R_GPIO_OUT0 */
955#define V_GPIO_OUT0 0x01
956#define V_GPIO_OUT1 0x02
957#define V_GPIO_OUT2 0x04
958#define V_GPIO_OUT3 0x08
959#define V_GPIO_OUT4 0x10
960#define V_GPIO_OUT5 0x20
961#define V_GPIO_OUT6 0x40
962#define V_GPIO_OUT7 0x80
963/* R_GPIO_OUT1 */
964#define V_GPIO_OUT8 0x01
965#define V_GPIO_OUT9 0x02
966#define V_GPIO_OUT10 0x04
967#define V_GPIO_OUT11 0x08
968#define V_GPIO_OUT12 0x10
969#define V_GPIO_OUT13 0x20
970#define V_GPIO_OUT14 0x40
971#define V_GPIO_OUT15 0x80
972/* R_GPIO_EN0 */
973#define V_GPIO_EN0 0x01
974#define V_GPIO_EN1 0x02
975#define V_GPIO_EN2 0x04
976#define V_GPIO_EN3 0x08
977#define V_GPIO_EN4 0x10
978#define V_GPIO_EN5 0x20
979#define V_GPIO_EN6 0x40
980#define V_GPIO_EN7 0x80
981/* R_GPIO_EN1 */
982#define V_GPIO_EN8 0x01
983#define V_GPIO_EN9 0x02
984#define V_GPIO_EN10 0x04
985#define V_GPIO_EN11 0x08
986#define V_GPIO_EN12 0x10
987#define V_GPIO_EN13 0x20
988#define V_GPIO_EN14 0x40
989#define V_GPIO_EN15 0x80
990/* R_GPIO_SEL */
991#define V_GPIO_SEL0 0x01
992#define V_GPIO_SEL1 0x02
993#define V_GPIO_SEL2 0x04
994#define V_GPIO_SEL3 0x08
995#define V_GPIO_SEL4 0x10
996#define V_GPIO_SEL5 0x20
997#define V_GPIO_SEL6 0x40
998#define V_GPIO_SEL7 0x80
999/* R_GPIO_IN0 */
1000#define V_GPIO_IN0 0x01
1001#define V_GPIO_IN1 0x02
1002#define V_GPIO_IN2 0x04
1003#define V_GPIO_IN3 0x08
1004#define V_GPIO_IN4 0x10
1005#define V_GPIO_IN5 0x20
1006#define V_GPIO_IN6 0x40
1007#define V_GPIO_IN7 0x80
1008/* R_GPIO_IN1 */
1009#define V_GPIO_IN8 0x01
1010#define V_GPIO_IN9 0x02
1011#define V_GPIO_IN10 0x04
1012#define V_GPIO_IN11 0x08
1013#define V_GPIO_IN12 0x10
1014#define V_GPIO_IN13 0x20
1015#define V_GPIO_IN14 0x40
1016#define V_GPIO_IN15 0x80
1017/* R_GPI_IN0 */
1018#define V_GPI_IN0 0x01
1019#define V_GPI_IN1 0x02
1020#define V_GPI_IN2 0x04
1021#define V_GPI_IN3 0x08
1022#define V_GPI_IN4 0x10
1023#define V_GPI_IN5 0x20
1024#define V_GPI_IN6 0x40
1025#define V_GPI_IN7 0x80
1026/* R_GPI_IN1 */
1027#define V_GPI_IN8 0x01
1028#define V_GPI_IN9 0x02
1029#define V_GPI_IN10 0x04
1030#define V_GPI_IN11 0x08
1031#define V_GPI_IN12 0x10
1032#define V_GPI_IN13 0x20
1033#define V_GPI_IN14 0x40
1034#define V_GPI_IN15 0x80
1035/* R_GPI_IN2 */
1036#define V_GPI_IN16 0x01
1037#define V_GPI_IN17 0x02
1038#define V_GPI_IN18 0x04
1039#define V_GPI_IN19 0x08
1040#define V_GPI_IN20 0x10
1041#define V_GPI_IN21 0x20
1042#define V_GPI_IN22 0x40
1043#define V_GPI_IN23 0x80
1044/* R_GPI_IN3 */
1045#define V_GPI_IN24 0x01
1046#define V_GPI_IN25 0x02
1047#define V_GPI_IN26 0x04
1048#define V_GPI_IN27 0x08
1049#define V_GPI_IN28 0x10
1050#define V_GPI_IN29 0x20
1051#define V_GPI_IN30 0x40
1052#define V_GPI_IN31 0x80
1053
1054/* map of all registers, used for debugging */
1055
1056#ifdef HFC_REGISTER_DEBUG
1057struct hfc_register_names {
1058 char *name;
1059 u_char reg;
1060} hfc_register_names[] = {
1061 /* write registers */
1062 {"R_CIRM", 0x00},
1063 {"R_CTRL", 0x01},
1064 {"R_BRG_PCM_CFG ", 0x02},
1065 {"R_RAM_ADDR0", 0x08},
1066 {"R_RAM_ADDR1", 0x09},
1067 {"R_RAM_ADDR2", 0x0A},
1068 {"R_FIRST_FIFO", 0x0B},
1069 {"R_RAM_SZ", 0x0C},
1070 {"R_FIFO_MD", 0x0D},
1071 {"R_INC_RES_FIFO", 0x0E},
1072 {"R_FIFO / R_FSM_IDX", 0x0F},
1073 {"R_SLOT", 0x10},
1074 {"R_IRQMSK_MISC", 0x11},
1075 {"R_SCI_MSK", 0x12},
1076 {"R_IRQ_CTRL", 0x13},
1077 {"R_PCM_MD0", 0x14},
1078 {"R_0x15", 0x15},
1079 {"R_ST_SEL", 0x16},
1080 {"R_ST_SYNC", 0x17},
1081 {"R_CONF_EN", 0x18},
1082 {"R_TI_WD", 0x1A},
1083 {"R_BERT_WD_MD", 0x1B},
1084 {"R_DTMF", 0x1C},
1085 {"R_DTMF_N", 0x1D},
1086 {"R_E1_XX_STA", 0x20},
1087 {"R_LOS0", 0x22},
1088 {"R_LOS1", 0x23},
1089 {"R_RX0", 0x24},
1090 {"R_RX_FR0", 0x25},
1091 {"R_RX_FR1", 0x26},
1092 {"R_TX0", 0x28},
1093 {"R_TX1", 0x29},
1094 {"R_TX_FR0", 0x2C},
1095 {"R_TX_FR1", 0x2D},
1096 {"R_TX_FR2", 0x2E},
1097 {"R_JATT_ATT", 0x2F},
1098 {"A_ST_xx_STA/R_RX_OFF", 0x30},
1099 {"A_ST_CTRL0/R_SYNC_OUT", 0x31},
1100 {"A_ST_CTRL1", 0x32},
1101 {"A_ST_CTRL2", 0x33},
1102 {"A_ST_SQ_WR", 0x34},
1103 {"R_TX_OFF", 0x34},
1104 {"R_SYNC_CTRL", 0x35},
1105 {"A_ST_CLK_DLY", 0x37},
1106 {"R_PWM0", 0x38},
1107 {"R_PWM1", 0x39},
1108 {"A_ST_B1_TX", 0x3C},
1109 {"A_ST_B2_TX", 0x3D},
1110 {"A_ST_D_TX", 0x3E},
1111 {"R_GPIO_OUT0", 0x40},
1112 {"R_GPIO_OUT1", 0x41},
1113 {"R_GPIO_EN0", 0x42},
1114 {"R_GPIO_EN1", 0x43},
1115 {"R_GPIO_SEL", 0x44},
1116 {"R_BRG_CTRL", 0x45},
1117 {"R_PWM_MD", 0x46},
1118 {"R_BRG_MD", 0x47},
1119 {"R_BRG_TIM0", 0x48},
1120 {"R_BRG_TIM1", 0x49},
1121 {"R_BRG_TIM2", 0x4A},
1122 {"R_BRG_TIM3", 0x4B},
1123 {"R_BRG_TIM_SEL01", 0x4C},
1124 {"R_BRG_TIM_SEL23", 0x4D},
1125 {"R_BRG_TIM_SEL45", 0x4E},
1126 {"R_BRG_TIM_SEL67", 0x4F},
1127 {"A_FIFO_DATA0-2", 0x80},
1128 {"A_FIFO_DATA0-2_NOINC", 0x84},
1129 {"R_RAM_DATA", 0xC0},
1130 {"A_SL_CFG", 0xD0},
1131 {"A_CONF", 0xD1},
1132 {"A_CH_MSK", 0xF4},
1133 {"A_CON_HDLC", 0xFA},
1134 {"A_SUBCH_CFG", 0xFB},
1135 {"A_CHANNEL", 0xFC},
1136 {"A_FIFO_SEQ", 0xFD},
1137 {"A_IRQ_MSK", 0xFF},
1138 {NULL, 0},
1139
1140 /* read registers */
1141 {"A_Z1", 0x04},
1142 {"A_Z1H", 0x05},
1143 {"A_Z2", 0x06},
1144 {"A_Z2H", 0x07},
1145 {"A_F1", 0x0C},
1146 {"A_F2", 0x0D},
1147 {"R_IRQ_OVIEW", 0x10},
1148 {"R_IRQ_MISC", 0x11},
1149 {"R_IRQ_STATECH", 0x12},
1150 {"R_CONF_OFLOW", 0x14},
1151 {"R_RAM_USE", 0x15},
1152 {"R_CHIP_ID", 0x16},
1153 {"R_BERT_STA", 0x17},
1154 {"R_F0_CNTL", 0x18},
1155 {"R_F0_CNTH", 0x19},
1156 {"R_BERT_ECL", 0x1A},
1157 {"R_BERT_ECH", 0x1B},
1158 {"R_STATUS", 0x1C},
1159 {"R_CHIP_RV", 0x1F},
1160 {"R_STATE", 0x20},
1161 {"R_SYNC_STA", 0x24},
1162 {"R_RX_SL0_0", 0x25},
1163 {"R_RX_SL0_1", 0x26},
1164 {"R_RX_SL0_2", 0x27},
1165 {"R_JATT_DIR", 0x2b},
1166 {"R_SLIP", 0x2c},
1167 {"A_ST_RD_STA", 0x30},
1168 {"R_FAS_ECL", 0x30},
1169 {"R_FAS_ECH", 0x31},
1170 {"R_VIO_ECL", 0x32},
1171 {"R_VIO_ECH", 0x33},
1172 {"R_CRC_ECL / A_ST_SQ_RD", 0x34},
1173 {"R_CRC_ECH", 0x35},
1174 {"R_E_ECL", 0x36},
1175 {"R_E_ECH", 0x37},
1176 {"R_SA6_SA13_ECL", 0x38},
1177 {"R_SA6_SA13_ECH", 0x39},
1178 {"R_SA6_SA23_ECL", 0x3A},
1179 {"R_SA6_SA23_ECH", 0x3B},
1180 {"A_ST_B1_RX", 0x3C},
1181 {"A_ST_B2_RX", 0x3D},
1182 {"A_ST_D_RX", 0x3E},
1183 {"A_ST_E_RX", 0x3F},
1184 {"R_GPIO_IN0", 0x40},
1185 {"R_GPIO_IN1", 0x41},
1186 {"R_GPI_IN0", 0x44},
1187 {"R_GPI_IN1", 0x45},
1188 {"R_GPI_IN2", 0x46},
1189 {"R_GPI_IN3", 0x47},
1190 {"A_FIFO_DATA0-2", 0x80},
1191 {"A_FIFO_DATA0-2_NOINC", 0x84},
1192 {"R_INT_DATA", 0x88},
1193 {"R_RAM_DATA", 0xC0},
1194 {"R_IRQ_FIFO_BL0", 0xC8},
1195 {"R_IRQ_FIFO_BL1", 0xC9},
1196 {"R_IRQ_FIFO_BL2", 0xCA},
1197 {"R_IRQ_FIFO_BL3", 0xCB},
1198 {"R_IRQ_FIFO_BL4", 0xCC},
1199 {"R_IRQ_FIFO_BL5", 0xCD},
1200 {"R_IRQ_FIFO_BL6", 0xCE},
1201 {"R_IRQ_FIFO_BL7", 0xCF},
1202};
1203#endif /* HFC_REGISTER_DEBUG */
1204
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
new file mode 100644
index 000000000000..2649ea55a9e8
--- /dev/null
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -0,0 +1,5320 @@
1/*
2 * hfcmulti.c low level driver for hfc-4s/hfc-8s/hfc-e1 based cards
3 *
4 * Author Andreas Eversberg (jolly@eversberg.eu)
5 * ported to mqueue mechanism:
6 * Peter Sprenger (sprengermoving-bytes.de)
7 *
8 * inspired by existing hfc-pci driver:
9 * Copyright 1999 by Werner Cornelius (werner@isdn-development.de)
10 * Copyright 2008 by Karsten Keil (kkeil@suse.de)
11 * Copyright 2008 by Andreas Eversberg (jolly@eversberg.eu)
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2, or (at your option)
16 * any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 *
27 *
28 * Thanks to Cologne Chip AG for this great controller!
29 */
30
31/*
32 * module parameters:
33 * type:
34 * By default (0), the card is automatically detected.
35 * Or use the following combinations:
36 * Bit 0-7 = 0x00001 = HFC-E1 (1 port)
37 * or Bit 0-7 = 0x00004 = HFC-4S (4 ports)
38 * or Bit 0-7 = 0x00008 = HFC-8S (8 ports)
39 * Bit 8 = 0x00100 = uLaw (instead of aLaw)
40 * Bit 9 = 0x00200 = Disable DTMF detect on all B-channels via hardware
41 * Bit 10 = spare
42 * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwhise auto)
43 * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwhise auto)
44 * Bit 13 = spare
45 * Bit 14 = 0x04000 = Use external ram (128K)
46 * Bit 15 = 0x08000 = Use external ram (512K)
47 * Bit 16 = 0x10000 = Use 64 timeslots instead of 32
48 * or Bit 17 = 0x20000 = Use 128 timeslots instead of anything else
49 * Bit 18 = spare
50 * Bit 19 = 0x80000 = Send the Watchdog a Signal (Dual E1 with Watchdog)
51 * (all other bits are reserved and shall be 0)
52 * example: 0x20204 one HFC-4S with dtmf detection and 128 timeslots on PCM
53 * bus (PCM master)
54 *
55 * port: (optional or required for all ports on all installed cards)
56 * HFC-4S/HFC-8S only bits:
57 * Bit 0 = 0x001 = Use master clock for this S/T interface
58 * (ony once per chip).
59 * Bit 1 = 0x002 = transmitter line setup (non capacitive mode)
60 * Don't use this unless you know what you are doing!
61 * Bit 2 = 0x004 = Disable E-channel. (No E-channel processing)
62 * example: 0x0001,0x0000,0x0000,0x0000 one HFC-4S with master clock
63 * received from port 1
64 *
65 * HFC-E1 only bits:
66 * Bit 0 = 0x0001 = interface: 0=copper, 1=optical
67 * Bit 1 = 0x0002 = reserved (later for 32 B-channels transparent mode)
68 * Bit 2 = 0x0004 = Report LOS
69 * Bit 3 = 0x0008 = Report AIS
70 * Bit 4 = 0x0010 = Report SLIP
71 * Bit 5 = 0x0020 = Report RDI
72 * Bit 8 = 0x0100 = Turn off CRC-4 Multiframe Mode, use double frame
73 * mode instead.
74 * Bit 9 = 0x0200 = Force get clock from interface, even in NT mode.
75 * or Bit 10 = 0x0400 = Force put clock to interface, even in TE mode.
76 * Bit 11 = 0x0800 = Use direct RX clock for PCM sync rather than PLL.
77 * (E1 only)
78 * Bit 12-13 = 0xX000 = elastic jitter buffer (1-3), Set both bits to 0
79 * for default.
80 * (all other bits are reserved and shall be 0)
81 *
82 * debug:
83 * NOTE: only one debug value must be given for all cards
84 * enable debugging (see hfc_multi.h for debug options)
85 *
86 * poll:
87 * NOTE: only one poll value must be given for all cards
88 * Give the number of samples for each fifo process.
89 * By default 128 is used. Decrease to reduce delay, increase to
90 * reduce cpu load. If unsure, don't mess with it!
91 * Valid is 8, 16, 32, 64, 128, 256.
92 *
93 * pcm:
94 * NOTE: only one pcm value must be given for every card.
95 * The PCM bus id tells the mISDNdsp module about the connected PCM bus.
96 * By default (0), the PCM bus id is 100 for the card that is PCM master.
97 * If multiple cards are PCM master (because they are not interconnected),
98 * each card with PCM master will have increasing PCM id.
99 * All PCM busses with the same ID are expected to be connected and have
100 * common time slots slots.
101 * Only one chip of the PCM bus must be master, the others slave.
102 * -1 means no support of PCM bus not even.
103 * Omit this value, if all cards are interconnected or none is connected.
104 * If unsure, don't give this parameter.
105 *
106 * dslot:
107 * NOTE: only one poll value must be given for every card.
108 * Also this value must be given for non-E1 cards. If omitted, the E1
109 * card has D-channel on time slot 16, which is default.
110 * If 1..15 or 17..31, an alternate time slot is used for D-channel.
111 * In this case, the application must be able to handle this.
112 * If -1 is given, the D-channel is disabled and all 31 slots can be used
113 * for B-channel. (only for specific applications)
114 * If you don't know how to use it, you don't need it!
115 *
116 * iomode:
117 * NOTE: only one mode value must be given for every card.
118 * -> See hfc_multi.h for HFC_IO_MODE_* values
119 * By default, the IO mode is pci memory IO (MEMIO).
120 * Some cards requre specific IO mode, so it cannot be changed.
121 * It may be usefull to set IO mode to register io (REGIO) to solve
122 * PCI bridge problems.
123 * If unsure, don't give this parameter.
124 *
125 * clockdelay_nt:
126 * NOTE: only one clockdelay_nt value must be given once for all cards.
127 * Give the value of the clock control register (A_ST_CLK_DLY)
128 * of the S/T interfaces in NT mode.
129 * This register is needed for the TBR3 certification, so don't change it.
130 *
131 * clockdelay_te:
132 * NOTE: only one clockdelay_te value must be given once
133 * Give the value of the clock control register (A_ST_CLK_DLY)
134 * of the S/T interfaces in TE mode.
135 * This register is needed for the TBR3 certification, so don't change it.
136 */
137
138/*
139 * debug register access (never use this, it will flood your system log)
140 * #define HFC_REGISTER_DEBUG
141 */
142
143static const char *hfcmulti_revision = "2.00";
144
145#include <linux/module.h>
146#include <linux/pci.h>
147#include <linux/delay.h>
148#include <linux/mISDNhw.h>
149#include <linux/mISDNdsp.h>
150
151/*
152#define IRQCOUNT_DEBUG
153#define IRQ_DEBUG
154*/
155
156#include "hfc_multi.h"
157#ifdef ECHOPREP
158#include "gaintab.h"
159#endif
160
161#define MAX_CARDS 8
162#define MAX_PORTS (8 * MAX_CARDS)
163
164static LIST_HEAD(HFClist);
165static spinlock_t HFClock; /* global hfc list lock */
166
167static void ph_state_change(struct dchannel *);
168static void (*hfc_interrupt)(void);
169static void (*register_interrupt)(void);
170static int (*unregister_interrupt)(void);
171static int interrupt_registered;
172
173static struct hfc_multi *syncmaster;
174int plxsd_master; /* if we have a master card (yet) */
175static spinlock_t plx_lock; /* may not acquire other lock inside */
176EXPORT_SYMBOL(plx_lock);
177
178#define TYP_E1 1
179#define TYP_4S 4
180#define TYP_8S 8
181
182static int poll_timer = 6; /* default = 128 samples = 16ms */
183/* number of POLL_TIMER interrupts for G2 timeout (ca 1s) */
184static int nt_t1_count[] = { 3840, 1920, 960, 480, 240, 120, 60, 30 };
185#define CLKDEL_TE 0x0f /* CLKDEL in TE mode */
186#define CLKDEL_NT 0x6c /* CLKDEL in NT mode
187 (0x60 MUST be included!) */
188static u_char silence = 0xff; /* silence by LAW */
189
190#define DIP_4S 0x1 /* DIP Switches for Beronet 1S/2S/4S cards */
191#define DIP_8S 0x2 /* DIP Switches for Beronet 8S+ cards */
192#define DIP_E1 0x3 /* DIP Switches for Beronet E1 cards */
193
194/*
195 * module stuff
196 */
197
198static uint type[MAX_CARDS];
199static uint pcm[MAX_CARDS];
200static uint dslot[MAX_CARDS];
201static uint iomode[MAX_CARDS];
202static uint port[MAX_PORTS];
203static uint debug;
204static uint poll;
205static uint timer;
206static uint clockdelay_te = CLKDEL_TE;
207static uint clockdelay_nt = CLKDEL_NT;
208
209static int HFC_cnt, Port_cnt, PCM_cnt = 99;
210
211MODULE_AUTHOR("Andreas Eversberg");
212MODULE_LICENSE("GPL");
213module_param(debug, uint, S_IRUGO | S_IWUSR);
214module_param(poll, uint, S_IRUGO | S_IWUSR);
215module_param(timer, uint, S_IRUGO | S_IWUSR);
216module_param(clockdelay_te, uint, S_IRUGO | S_IWUSR);
217module_param(clockdelay_nt, uint, S_IRUGO | S_IWUSR);
218module_param_array(type, uint, NULL, S_IRUGO | S_IWUSR);
219module_param_array(pcm, uint, NULL, S_IRUGO | S_IWUSR);
220module_param_array(dslot, uint, NULL, S_IRUGO | S_IWUSR);
221module_param_array(iomode, uint, NULL, S_IRUGO | S_IWUSR);
222module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR);
223
224#ifdef HFC_REGISTER_DEBUG
225#define HFC_outb(hc, reg, val) \
226 (hc->HFC_outb(hc, reg, val, __func__, __LINE__))
227#define HFC_outb_nodebug(hc, reg, val) \
228 (hc->HFC_outb_nodebug(hc, reg, val, __func__, __LINE__))
229#define HFC_inb(hc, reg) \
230 (hc->HFC_inb(hc, reg, __func__, __LINE__))
231#define HFC_inb_nodebug(hc, reg) \
232 (hc->HFC_inb_nodebug(hc, reg, __func__, __LINE__))
233#define HFC_inw(hc, reg) \
234 (hc->HFC_inw(hc, reg, __func__, __LINE__))
235#define HFC_inw_nodebug(hc, reg) \
236 (hc->HFC_inw_nodebug(hc, reg, __func__, __LINE__))
237#define HFC_wait(hc) \
238 (hc->HFC_wait(hc, __func__, __LINE__))
239#define HFC_wait_nodebug(hc) \
240 (hc->HFC_wait_nodebug(hc, __func__, __LINE__))
241#else
242#define HFC_outb(hc, reg, val) (hc->HFC_outb(hc, reg, val))
243#define HFC_outb_nodebug(hc, reg, val) (hc->HFC_outb_nodebug(hc, reg, val))
244#define HFC_inb(hc, reg) (hc->HFC_inb(hc, reg))
245#define HFC_inb_nodebug(hc, reg) (hc->HFC_inb_nodebug(hc, reg))
246#define HFC_inw(hc, reg) (hc->HFC_inw(hc, reg))
247#define HFC_inw_nodebug(hc, reg) (hc->HFC_inw_nodebug(hc, reg))
248#define HFC_wait(hc) (hc->HFC_wait(hc))
249#define HFC_wait_nodebug(hc) (hc->HFC_wait_nodebug(hc))
250#endif
251
252/* HFC_IO_MODE_PCIMEM */
253static void
254#ifdef HFC_REGISTER_DEBUG
255HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val,
256 const char *function, int line)
257#else
258HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val)
259#endif
260{
261 writeb(val, (hc->pci_membase)+reg);
262}
263static u_char
264#ifdef HFC_REGISTER_DEBUG
265HFC_inb_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
266#else
267HFC_inb_pcimem(struct hfc_multi *hc, u_char reg)
268#endif
269{
270 return readb((hc->pci_membase)+reg);
271}
272static u_short
273#ifdef HFC_REGISTER_DEBUG
274HFC_inw_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
275#else
276HFC_inw_pcimem(struct hfc_multi *hc, u_char reg)
277#endif
278{
279 return readw((hc->pci_membase)+reg);
280}
281static void
282#ifdef HFC_REGISTER_DEBUG
283HFC_wait_pcimem(struct hfc_multi *hc, const char *function, int line)
284#else
285HFC_wait_pcimem(struct hfc_multi *hc)
286#endif
287{
288 while (readb((hc->pci_membase)+R_STATUS) & V_BUSY);
289}
290
291/* HFC_IO_MODE_REGIO */
292static void
293#ifdef HFC_REGISTER_DEBUG
294HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val,
295 const char *function, int line)
296#else
297HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val)
298#endif
299{
300 outb(reg, (hc->pci_iobase)+4);
301 outb(val, hc->pci_iobase);
302}
303static u_char
304#ifdef HFC_REGISTER_DEBUG
305HFC_inb_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
306#else
307HFC_inb_regio(struct hfc_multi *hc, u_char reg)
308#endif
309{
310 outb(reg, (hc->pci_iobase)+4);
311 return inb(hc->pci_iobase);
312}
313static u_short
314#ifdef HFC_REGISTER_DEBUG
315HFC_inw_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
316#else
317HFC_inw_regio(struct hfc_multi *hc, u_char reg)
318#endif
319{
320 outb(reg, (hc->pci_iobase)+4);
321 return inw(hc->pci_iobase);
322}
323static void
324#ifdef HFC_REGISTER_DEBUG
325HFC_wait_regio(struct hfc_multi *hc, const char *function, int line)
326#else
327HFC_wait_regio(struct hfc_multi *hc)
328#endif
329{
330 outb(R_STATUS, (hc->pci_iobase)+4);
331 while (inb(hc->pci_iobase) & V_BUSY);
332}
333
334#ifdef HFC_REGISTER_DEBUG
335static void
336HFC_outb_debug(struct hfc_multi *hc, u_char reg, u_char val,
337 const char *function, int line)
338{
339 char regname[256] = "", bits[9] = "xxxxxxxx";
340 int i;
341
342 i = -1;
343 while (hfc_register_names[++i].name) {
344 if (hfc_register_names[i].reg == reg)
345 strcat(regname, hfc_register_names[i].name);
346 }
347 if (regname[0] == '\0')
348 strcpy(regname, "register");
349
350 bits[7] = '0'+(!!(val&1));
351 bits[6] = '0'+(!!(val&2));
352 bits[5] = '0'+(!!(val&4));
353 bits[4] = '0'+(!!(val&8));
354 bits[3] = '0'+(!!(val&16));
355 bits[2] = '0'+(!!(val&32));
356 bits[1] = '0'+(!!(val&64));
357 bits[0] = '0'+(!!(val&128));
358 printk(KERN_DEBUG
359 "HFC_outb(chip %d, %02x=%s, 0x%02x=%s); in %s() line %d\n",
360 hc->id, reg, regname, val, bits, function, line);
361 HFC_outb_nodebug(hc, reg, val);
362}
363static u_char
364HFC_inb_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
365{
366 char regname[256] = "", bits[9] = "xxxxxxxx";
367 u_char val = HFC_inb_nodebug(hc, reg);
368 int i;
369
370 i = 0;
371 while (hfc_register_names[i++].name)
372 ;
373 while (hfc_register_names[++i].name) {
374 if (hfc_register_names[i].reg == reg)
375 strcat(regname, hfc_register_names[i].name);
376 }
377 if (regname[0] == '\0')
378 strcpy(regname, "register");
379
380 bits[7] = '0'+(!!(val&1));
381 bits[6] = '0'+(!!(val&2));
382 bits[5] = '0'+(!!(val&4));
383 bits[4] = '0'+(!!(val&8));
384 bits[3] = '0'+(!!(val&16));
385 bits[2] = '0'+(!!(val&32));
386 bits[1] = '0'+(!!(val&64));
387 bits[0] = '0'+(!!(val&128));
388 printk(KERN_DEBUG
389 "HFC_inb(chip %d, %02x=%s) = 0x%02x=%s; in %s() line %d\n",
390 hc->id, reg, regname, val, bits, function, line);
391 return val;
392}
393static u_short
394HFC_inw_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
395{
396 char regname[256] = "";
397 u_short val = HFC_inw_nodebug(hc, reg);
398 int i;
399
400 i = 0;
401 while (hfc_register_names[i++].name)
402 ;
403 while (hfc_register_names[++i].name) {
404 if (hfc_register_names[i].reg == reg)
405 strcat(regname, hfc_register_names[i].name);
406 }
407 if (regname[0] == '\0')
408 strcpy(regname, "register");
409
410 printk(KERN_DEBUG
411 "HFC_inw(chip %d, %02x=%s) = 0x%04x; in %s() line %d\n",
412 hc->id, reg, regname, val, function, line);
413 return val;
414}
415static void
416HFC_wait_debug(struct hfc_multi *hc, const char *function, int line)
417{
418 printk(KERN_DEBUG "HFC_wait(chip %d); in %s() line %d\n",
419 hc->id, function, line);
420 HFC_wait_nodebug(hc);
421}
422#endif
423
424/* write fifo data (REGIO) */
425void
426write_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
427{
428 outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
429 while (len>>2) {
430 outl(*(u32 *)data, hc->pci_iobase);
431 data += 4;
432 len -= 4;
433 }
434 while (len>>1) {
435 outw(*(u16 *)data, hc->pci_iobase);
436 data += 2;
437 len -= 2;
438 }
439 while (len) {
440 outb(*data, hc->pci_iobase);
441 data++;
442 len--;
443 }
444}
445/* write fifo data (PCIMEM) */
446void
447write_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
448{
449 while (len>>2) {
450 writel(*(u32 *)data, (hc->pci_membase)+A_FIFO_DATA0);
451 data += 4;
452 len -= 4;
453 }
454 while (len>>1) {
455 writew(*(u16 *)data, (hc->pci_membase)+A_FIFO_DATA0);
456 data += 2;
457 len -= 2;
458 }
459 while (len) {
460 writeb(*data, (hc->pci_membase)+A_FIFO_DATA0);
461 data++;
462 len--;
463 }
464}
465/* read fifo data (REGIO) */
466void
467read_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
468{
469 outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
470 while (len>>2) {
471 *(u32 *)data = inl(hc->pci_iobase);
472 data += 4;
473 len -= 4;
474 }
475 while (len>>1) {
476 *(u16 *)data = inw(hc->pci_iobase);
477 data += 2;
478 len -= 2;
479 }
480 while (len) {
481 *data = inb(hc->pci_iobase);
482 data++;
483 len--;
484 }
485}
486
487/* read fifo data (PCIMEM) */
488void
489read_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
490{
491 while (len>>2) {
492 *(u32 *)data =
493 readl((hc->pci_membase)+A_FIFO_DATA0);
494 data += 4;
495 len -= 4;
496 }
497 while (len>>1) {
498 *(u16 *)data =
499 readw((hc->pci_membase)+A_FIFO_DATA0);
500 data += 2;
501 len -= 2;
502 }
503 while (len) {
504 *data = readb((hc->pci_membase)+A_FIFO_DATA0);
505 data++;
506 len--;
507 }
508}
509
510
511static void
512enable_hwirq(struct hfc_multi *hc)
513{
514 hc->hw.r_irq_ctrl |= V_GLOB_IRQ_EN;
515 HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl);
516}
517
518static void
519disable_hwirq(struct hfc_multi *hc)
520{
521 hc->hw.r_irq_ctrl &= ~((u_char)V_GLOB_IRQ_EN);
522 HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl);
523}
524
525#define NUM_EC 2
526#define MAX_TDM_CHAN 32
527
528
529inline void
530enablepcibridge(struct hfc_multi *c)
531{
532 HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); /* was _io before */
533}
534
535inline void
536disablepcibridge(struct hfc_multi *c)
537{
538 HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x2); /* was _io before */
539}
540
541inline unsigned char
542readpcibridge(struct hfc_multi *hc, unsigned char address)
543{
544 unsigned short cipv;
545 unsigned char data;
546
547 if (!hc->pci_iobase)
548 return 0;
549
550 /* slow down a PCI read access by 1 PCI clock cycle */
551 HFC_outb(hc, R_CTRL, 0x4); /*was _io before*/
552
553 if (address == 0)
554 cipv = 0x4000;
555 else
556 cipv = 0x5800;
557
558 /* select local bridge port address by writing to CIP port */
559 /* data = HFC_inb(c, cipv); * was _io before */
560 outw(cipv, hc->pci_iobase + 4);
561 data = inb(hc->pci_iobase);
562
563 /* restore R_CTRL for normal PCI read cycle speed */
564 HFC_outb(hc, R_CTRL, 0x0); /* was _io before */
565
566 return data;
567}
568
569inline void
570writepcibridge(struct hfc_multi *hc, unsigned char address, unsigned char data)
571{
572 unsigned short cipv;
573 unsigned int datav;
574
575 if (!hc->pci_iobase)
576 return;
577
578 if (address == 0)
579 cipv = 0x4000;
580 else
581 cipv = 0x5800;
582
583 /* select local bridge port address by writing to CIP port */
584 outw(cipv, hc->pci_iobase + 4);
585 /* define a 32 bit dword with 4 identical bytes for write sequence */
586 datav = data | ((__u32) data << 8) | ((__u32) data << 16) |
587 ((__u32) data << 24);
588
589 /*
590 * write this 32 bit dword to the bridge data port
591 * this will initiate a write sequence of up to 4 writes to the same
592 * address on the local bus interface the number of write accesses
593 * is undefined but >=1 and depends on the next PCI transaction
594 * during write sequence on the local bus
595 */
596 outl(datav, hc->pci_iobase);
597}
598
599inline void
600cpld_set_reg(struct hfc_multi *hc, unsigned char reg)
601{
602 /* Do data pin read low byte */
603 HFC_outb(hc, R_GPIO_OUT1, reg);
604}
605
606inline void
607cpld_write_reg(struct hfc_multi *hc, unsigned char reg, unsigned char val)
608{
609 cpld_set_reg(hc, reg);
610
611 enablepcibridge(hc);
612 writepcibridge(hc, 1, val);
613 disablepcibridge(hc);
614
615 return;
616}
617
618inline unsigned char
619cpld_read_reg(struct hfc_multi *hc, unsigned char reg)
620{
621 unsigned char bytein;
622
623 cpld_set_reg(hc, reg);
624
625 /* Do data pin read low byte */
626 HFC_outb(hc, R_GPIO_OUT1, reg);
627
628 enablepcibridge(hc);
629 bytein = readpcibridge(hc, 1);
630 disablepcibridge(hc);
631
632 return bytein;
633}
634
635inline void
636vpm_write_address(struct hfc_multi *hc, unsigned short addr)
637{
638 cpld_write_reg(hc, 0, 0xff & addr);
639 cpld_write_reg(hc, 1, 0x01 & (addr >> 8));
640}
641
642inline unsigned short
643vpm_read_address(struct hfc_multi *c)
644{
645 unsigned short addr;
646 unsigned short highbit;
647
648 addr = cpld_read_reg(c, 0);
649 highbit = cpld_read_reg(c, 1);
650
651 addr = addr | (highbit << 8);
652
653 return addr & 0x1ff;
654}
655
656inline unsigned char
657vpm_in(struct hfc_multi *c, int which, unsigned short addr)
658{
659 unsigned char res;
660
661 vpm_write_address(c, addr);
662
663 if (!which)
664 cpld_set_reg(c, 2);
665 else
666 cpld_set_reg(c, 3);
667
668 enablepcibridge(c);
669 res = readpcibridge(c, 1);
670 disablepcibridge(c);
671
672 cpld_set_reg(c, 0);
673
674 return res;
675}
676
677inline void
678vpm_out(struct hfc_multi *c, int which, unsigned short addr,
679 unsigned char data)
680{
681 vpm_write_address(c, addr);
682
683 enablepcibridge(c);
684
685 if (!which)
686 cpld_set_reg(c, 2);
687 else
688 cpld_set_reg(c, 3);
689
690 writepcibridge(c, 1, data);
691
692 cpld_set_reg(c, 0);
693
694 disablepcibridge(c);
695
696 {
697 unsigned char regin;
698 regin = vpm_in(c, which, addr);
699 if (regin != data)
700 printk(KERN_DEBUG "Wrote 0x%x to register 0x%x but got back "
701 "0x%x\n", data, addr, regin);
702 }
703
704}
705
706
707void
708vpm_init(struct hfc_multi *wc)
709{
710 unsigned char reg;
711 unsigned int mask;
712 unsigned int i, x, y;
713 unsigned int ver;
714
715 for (x = 0; x < NUM_EC; x++) {
716 /* Setup GPIO's */
717 if (!x) {
718 ver = vpm_in(wc, x, 0x1a0);
719 printk(KERN_DEBUG "VPM: Chip %d: ver %02x\n", x, ver);
720 }
721
722 for (y = 0; y < 4; y++) {
723 vpm_out(wc, x, 0x1a8 + y, 0x00); /* GPIO out */
724 vpm_out(wc, x, 0x1ac + y, 0x00); /* GPIO dir */
725 vpm_out(wc, x, 0x1b0 + y, 0x00); /* GPIO sel */
726 }
727
728 /* Setup TDM path - sets fsync and tdm_clk as inputs */
729 reg = vpm_in(wc, x, 0x1a3); /* misc_con */
730 vpm_out(wc, x, 0x1a3, reg & ~2);
731
732 /* Setup Echo length (256 taps) */
733 vpm_out(wc, x, 0x022, 1);
734 vpm_out(wc, x, 0x023, 0xff);
735
736 /* Setup timeslots */
737 vpm_out(wc, x, 0x02f, 0x00);
738 mask = 0x02020202 << (x * 4);
739
740 /* Setup the tdm channel masks for all chips */
741 for (i = 0; i < 4; i++)
742 vpm_out(wc, x, 0x33 - i, (mask >> (i << 3)) & 0xff);
743
744 /* Setup convergence rate */
745 printk(KERN_DEBUG "VPM: A-law mode\n");
746 reg = 0x00 | 0x10 | 0x01;
747 vpm_out(wc, x, 0x20, reg);
748 printk(KERN_DEBUG "VPM reg 0x20 is %x\n", reg);
749 /*vpm_out(wc, x, 0x20, (0x00 | 0x08 | 0x20 | 0x10)); */
750
751 vpm_out(wc, x, 0x24, 0x02);
752 reg = vpm_in(wc, x, 0x24);
753 printk(KERN_DEBUG "NLP Thresh is set to %d (0x%x)\n", reg, reg);
754
755 /* Initialize echo cans */
756 for (i = 0; i < MAX_TDM_CHAN; i++) {
757 if (mask & (0x00000001 << i))
758 vpm_out(wc, x, i, 0x00);
759 }
760
761 /*
762 * ARM arch at least disallows a udelay of
763 * more than 2ms... it gives a fake "__bad_udelay"
764 * reference at link-time.
765 * long delays in kernel code are pretty sucky anyway
766 * for now work around it using 5 x 2ms instead of 1 x 10ms
767 */
768
769 udelay(2000);
770 udelay(2000);
771 udelay(2000);
772 udelay(2000);
773 udelay(2000);
774
775 /* Put in bypass mode */
776 for (i = 0; i < MAX_TDM_CHAN; i++) {
777 if (mask & (0x00000001 << i))
778 vpm_out(wc, x, i, 0x01);
779 }
780
781 /* Enable bypass */
782 for (i = 0; i < MAX_TDM_CHAN; i++) {
783 if (mask & (0x00000001 << i))
784 vpm_out(wc, x, 0x78 + i, 0x01);
785 }
786
787 }
788}
789
790void
791vpm_check(struct hfc_multi *hctmp)
792{
793 unsigned char gpi2;
794
795 gpi2 = HFC_inb(hctmp, R_GPI_IN2);
796
797 if ((gpi2 & 0x3) != 0x3)
798 printk(KERN_DEBUG "Got interrupt 0x%x from VPM!\n", gpi2);
799}
800
801
802/*
803 * Interface to enable/disable the HW Echocan
804 *
805 * these functions are called within a spin_lock_irqsave on
806 * the channel instance lock, so we are not disturbed by irqs
807 *
808 * we can later easily change the interface to make other
809 * things configurable, for now we configure the taps
810 *
811 */
812
813void
814vpm_echocan_on(struct hfc_multi *hc, int ch, int taps)
815{
816 unsigned int timeslot;
817 unsigned int unit;
818 struct bchannel *bch = hc->chan[ch].bch;
819#ifdef TXADJ
820 int txadj = -4;
821 struct sk_buff *skb;
822#endif
823 if (hc->chan[ch].protocol != ISDN_P_B_RAW)
824 return;
825
826 if (!bch)
827 return;
828
829#ifdef TXADJ
830 skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX,
831 sizeof(int), &txadj, GFP_ATOMIC);
832 if (skb)
833 recv_Bchannel_skb(bch, skb);
834#endif
835
836 timeslot = ((ch/4)*8) + ((ch%4)*4) + 1;
837 unit = ch % 4;
838
839 printk(KERN_NOTICE "vpm_echocan_on called taps [%d] on timeslot %d\n",
840 taps, timeslot);
841
842 vpm_out(hc, unit, timeslot, 0x7e);
843}
844
845void
846vpm_echocan_off(struct hfc_multi *hc, int ch)
847{
848 unsigned int timeslot;
849 unsigned int unit;
850 struct bchannel *bch = hc->chan[ch].bch;
851#ifdef TXADJ
852 int txadj = 0;
853 struct sk_buff *skb;
854#endif
855
856 if (hc->chan[ch].protocol != ISDN_P_B_RAW)
857 return;
858
859 if (!bch)
860 return;
861
862#ifdef TXADJ
863 skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX,
864 sizeof(int), &txadj, GFP_ATOMIC);
865 if (skb)
866 recv_Bchannel_skb(bch, skb);
867#endif
868
869 timeslot = ((ch/4)*8) + ((ch%4)*4) + 1;
870 unit = ch % 4;
871
872 printk(KERN_NOTICE "vpm_echocan_off called on timeslot %d\n",
873 timeslot);
874 /* FILLME */
875 vpm_out(hc, unit, timeslot, 0x01);
876}
877
878
879/*
880 * Speech Design resync feature
881 * NOTE: This is called sometimes outside interrupt handler.
882 * We must lock irqsave, so no other interrupt (other card) will occurr!
883 * Also multiple interrupts may nest, so must lock each access (lists, card)!
884 */
885static inline void
886hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
887{
888 struct hfc_multi *hc, *next, *pcmmaster = 0;
889 u_int *plx_acc_32, pv;
890 u_long flags;
891
892 spin_lock_irqsave(&HFClock, flags);
893 spin_lock(&plx_lock); /* must be locked inside other locks */
894
895 if (debug & DEBUG_HFCMULTI_PLXSD)
896 printk(KERN_DEBUG "%s: RESYNC(syncmaster=0x%p)\n",
897 __func__, syncmaster);
898
899 /* select new master */
900 if (newmaster) {
901 if (debug & DEBUG_HFCMULTI_PLXSD)
902 printk(KERN_DEBUG "using provided controller\n");
903 } else {
904 list_for_each_entry_safe(hc, next, &HFClist, list) {
905 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
906 if (hc->syncronized) {
907 newmaster = hc;
908 break;
909 }
910 }
911 }
912 }
913
914 /* Disable sync of all cards */
915 list_for_each_entry_safe(hc, next, &HFClist, list) {
916 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
917 plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
918 pv = readl(plx_acc_32);
919 pv &= ~PLX_SYNC_O_EN;
920 writel(pv, plx_acc_32);
921 if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
922 pcmmaster = hc;
923 if (hc->type == 1) {
924 if (debug & DEBUG_HFCMULTI_PLXSD)
925 printk(KERN_DEBUG
926 "Schedule SYNC_I\n");
927 hc->e1_resync |= 1; /* get SYNC_I */
928 }
929 }
930 }
931 }
932
933 if (newmaster) {
934 hc = newmaster;
935 if (debug & DEBUG_HFCMULTI_PLXSD)
936 printk(KERN_DEBUG "id=%d (0x%p) = syncronized with "
937 "interface.\n", hc->id, hc);
938 /* Enable new sync master */
939 plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
940 pv = readl(plx_acc_32);
941 pv |= PLX_SYNC_O_EN;
942 writel(pv, plx_acc_32);
943 /* switch to jatt PLL, if not disabled by RX_SYNC */
944 if (hc->type == 1 && !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) {
945 if (debug & DEBUG_HFCMULTI_PLXSD)
946 printk(KERN_DEBUG "Schedule jatt PLL\n");
947 hc->e1_resync |= 2; /* switch to jatt */
948 }
949 } else {
950 if (pcmmaster) {
951 hc = pcmmaster;
952 if (debug & DEBUG_HFCMULTI_PLXSD)
953 printk(KERN_DEBUG
954 "id=%d (0x%p) = PCM master syncronized "
955 "with QUARTZ\n", hc->id, hc);
956 if (hc->type == 1) {
957 /* Use the crystal clock for the PCM
958 master card */
959 if (debug & DEBUG_HFCMULTI_PLXSD)
960 printk(KERN_DEBUG
961 "Schedule QUARTZ for HFC-E1\n");
962 hc->e1_resync |= 4; /* switch quartz */
963 } else {
964 if (debug & DEBUG_HFCMULTI_PLXSD)
965 printk(KERN_DEBUG
966 "QUARTZ is automatically "
967 "enabled by HFC-%dS\n", hc->type);
968 }
969 plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
970 pv = readl(plx_acc_32);
971 pv |= PLX_SYNC_O_EN;
972 writel(pv, plx_acc_32);
973 } else
974 if (!rm)
975 printk(KERN_ERR "%s no pcm master, this MUST "
976 "not happen!\n", __func__);
977 }
978 syncmaster = newmaster;
979
980 spin_unlock(&plx_lock);
981 spin_unlock_irqrestore(&HFClock, flags);
982}
983
984/* This must be called AND hc must be locked irqsave!!! */
985inline void
986plxsd_checksync(struct hfc_multi *hc, int rm)
987{
988 if (hc->syncronized) {
989 if (syncmaster == NULL) {
990 if (debug & DEBUG_HFCMULTI_PLXSD)
991 printk(KERN_WARNING "%s: GOT sync on card %d"
992 " (id=%d)\n", __func__, hc->id + 1,
993 hc->id);
994 hfcmulti_resync(hc, hc, rm);
995 }
996 } else {
997 if (syncmaster == hc) {
998 if (debug & DEBUG_HFCMULTI_PLXSD)
999 printk(KERN_WARNING "%s: LOST sync on card %d"
1000 " (id=%d)\n", __func__, hc->id + 1,
1001 hc->id);
1002 hfcmulti_resync(hc, NULL, rm);
1003 }
1004 }
1005}
1006
1007
1008/*
1009 * free hardware resources used by driver
1010 */
1011static void
1012release_io_hfcmulti(struct hfc_multi *hc)
1013{
1014 u_int *plx_acc_32, pv;
1015 u_long plx_flags;
1016
1017 if (debug & DEBUG_HFCMULTI_INIT)
1018 printk(KERN_DEBUG "%s: entered\n", __func__);
1019
1020 /* soft reset also masks all interrupts */
1021 hc->hw.r_cirm |= V_SRES;
1022 HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
1023 udelay(1000);
1024 hc->hw.r_cirm &= ~V_SRES;
1025 HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
1026 udelay(1000); /* instead of 'wait' that may cause locking */
1027
1028 /* release Speech Design card, if PLX was initialized */
1029 if (test_bit(HFC_CHIP_PLXSD, &hc->chip) && hc->plx_membase) {
1030 if (debug & DEBUG_HFCMULTI_PLXSD)
1031 printk(KERN_DEBUG "%s: release PLXSD card %d\n",
1032 __func__, hc->id + 1);
1033 spin_lock_irqsave(&plx_lock, plx_flags);
1034 plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
1035 writel(PLX_GPIOC_INIT, plx_acc_32);
1036 pv = readl(plx_acc_32);
1037 /* Termination off */
1038 pv &= ~PLX_TERM_ON;
1039 /* Disconnect the PCM */
1040 pv |= PLX_SLAVE_EN_N;
1041 pv &= ~PLX_MASTER_EN;
1042 pv &= ~PLX_SYNC_O_EN;
1043 /* Put the DSP in Reset */
1044 pv &= ~PLX_DSP_RES_N;
1045 writel(pv, plx_acc_32);
1046 if (debug & DEBUG_HFCMULTI_INIT)
1047 printk(KERN_WARNING "%s: PCM off: PLX_GPIO=%x\n",
1048 __func__, pv);
1049 spin_unlock_irqrestore(&plx_lock, plx_flags);
1050 }
1051
1052 /* disable memory mapped ports / io ports */
1053 test_and_clear_bit(HFC_CHIP_PLXSD, &hc->chip); /* prevent resync */
1054 pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0);
1055 if (hc->pci_membase)
1056 iounmap((void *)hc->pci_membase);
1057 if (hc->plx_membase)
1058 iounmap((void *)hc->plx_membase);
1059 if (hc->pci_iobase)
1060 release_region(hc->pci_iobase, 8);
1061
1062 if (hc->pci_dev) {
1063 pci_disable_device(hc->pci_dev);
1064 pci_set_drvdata(hc->pci_dev, NULL);
1065 }
1066 if (debug & DEBUG_HFCMULTI_INIT)
1067 printk(KERN_DEBUG "%s: done\n", __func__);
1068}
1069
1070/*
1071 * function called to reset the HFC chip. A complete software reset of chip
1072 * and fifos is done. All configuration of the chip is done.
1073 */
1074
1075static int
1076init_chip(struct hfc_multi *hc)
1077{
1078 u_long flags, val, val2 = 0, rev;
1079 int i, err = 0;
1080 u_char r_conf_en, rval;
1081 u_int *plx_acc_32, pv;
1082 u_long plx_flags, hfc_flags;
1083 int plx_count;
1084 struct hfc_multi *pos, *next, *plx_last_hc;
1085
1086 spin_lock_irqsave(&hc->lock, flags);
1087 /* reset all registers */
1088 memset(&hc->hw, 0, sizeof(struct hfcm_hw));
1089
1090 /* revision check */
1091 if (debug & DEBUG_HFCMULTI_INIT)
1092 printk(KERN_DEBUG "%s: entered\n", __func__);
1093 val = HFC_inb(hc, R_CHIP_ID)>>4;
1094 if (val != 0x8 && val != 0xc && val != 0xe) {
1095 printk(KERN_INFO "HFC_multi: unknown CHIP_ID:%x\n", (u_int)val);
1096 err = -EIO;
1097 goto out;
1098 }
1099 rev = HFC_inb(hc, R_CHIP_RV);
1100 printk(KERN_INFO
1101 "HFC_multi: detected HFC with chip ID=0x%lx revision=%ld%s\n",
1102 val, rev, (rev == 0) ? " (old FIFO handling)" : "");
1103 if (rev == 0) {
1104 test_and_set_bit(HFC_CHIP_REVISION0, &hc->chip);
1105 printk(KERN_WARNING
1106 "HFC_multi: NOTE: Your chip is revision 0, "
1107 "ask Cologne Chip for update. Newer chips "
1108 "have a better FIFO handling. Old chips "
1109 "still work but may have slightly lower "
1110 "HDLC transmit performance.\n");
1111 }
1112 if (rev > 1) {
1113 printk(KERN_WARNING "HFC_multi: WARNING: This driver doesn't "
1114 "consider chip revision = %ld. The chip / "
1115 "bridge may not work.\n", rev);
1116 }
1117
1118 /* set s-ram size */
1119 hc->Flen = 0x10;
1120 hc->Zmin = 0x80;
1121 hc->Zlen = 384;
1122 hc->DTMFbase = 0x1000;
1123 if (test_bit(HFC_CHIP_EXRAM_128, &hc->chip)) {
1124 if (debug & DEBUG_HFCMULTI_INIT)
1125 printk(KERN_DEBUG "%s: changing to 128K extenal RAM\n",
1126 __func__);
1127 hc->hw.r_ctrl |= V_EXT_RAM;
1128 hc->hw.r_ram_sz = 1;
1129 hc->Flen = 0x20;
1130 hc->Zmin = 0xc0;
1131 hc->Zlen = 1856;
1132 hc->DTMFbase = 0x2000;
1133 }
1134 if (test_bit(HFC_CHIP_EXRAM_512, &hc->chip)) {
1135 if (debug & DEBUG_HFCMULTI_INIT)
1136 printk(KERN_DEBUG "%s: changing to 512K extenal RAM\n",
1137 __func__);
1138 hc->hw.r_ctrl |= V_EXT_RAM;
1139 hc->hw.r_ram_sz = 2;
1140 hc->Flen = 0x20;
1141 hc->Zmin = 0xc0;
1142 hc->Zlen = 8000;
1143 hc->DTMFbase = 0x2000;
1144 }
1145 hc->max_trans = poll << 1;
1146 if (hc->max_trans > hc->Zlen)
1147 hc->max_trans = hc->Zlen;
1148
1149 /* Speech Design PLX bridge */
1150 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
1151 if (debug & DEBUG_HFCMULTI_PLXSD)
1152 printk(KERN_DEBUG "%s: initializing PLXSD card %d\n",
1153 __func__, hc->id + 1);
1154 spin_lock_irqsave(&plx_lock, plx_flags);
1155 plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
1156 writel(PLX_GPIOC_INIT, plx_acc_32);
1157 pv = readl(plx_acc_32);
1158 /* The first and the last cards are terminating the PCM bus */
1159 pv |= PLX_TERM_ON; /* hc is currently the last */
1160 /* Disconnect the PCM */
1161 pv |= PLX_SLAVE_EN_N;
1162 pv &= ~PLX_MASTER_EN;
1163 pv &= ~PLX_SYNC_O_EN;
1164 /* Put the DSP in Reset */
1165 pv &= ~PLX_DSP_RES_N;
1166 writel(pv, plx_acc_32);
1167 spin_unlock_irqrestore(&plx_lock, plx_flags);
1168 if (debug & DEBUG_HFCMULTI_INIT)
1169 printk(KERN_WARNING "%s: slave/term: PLX_GPIO=%x\n",
1170 __func__, pv);
1171 /*
1172 * If we are the 3rd PLXSD card or higher, we must turn
1173 * termination of last PLXSD card off.
1174 */
1175 spin_lock_irqsave(&HFClock, hfc_flags);
1176 plx_count = 0;
1177 plx_last_hc = NULL;
1178 list_for_each_entry_safe(pos, next, &HFClist, list) {
1179 if (test_bit(HFC_CHIP_PLXSD, &pos->chip)) {
1180 plx_count++;
1181 if (pos != hc)
1182 plx_last_hc = pos;
1183 }
1184 }
1185 if (plx_count >= 3) {
1186 if (debug & DEBUG_HFCMULTI_PLXSD)
1187 printk(KERN_DEBUG "%s: card %d is between, so "
1188 "we disable termination\n",
1189 __func__, plx_last_hc->id + 1);
1190 spin_lock_irqsave(&plx_lock, plx_flags);
1191 plx_acc_32 = (u_int *)(plx_last_hc->plx_membase
1192 + PLX_GPIOC);
1193 pv = readl(plx_acc_32);
1194 pv &= ~PLX_TERM_ON;
1195 writel(pv, plx_acc_32);
1196 spin_unlock_irqrestore(&plx_lock, plx_flags);
1197 if (debug & DEBUG_HFCMULTI_INIT)
1198 printk(KERN_WARNING "%s: term off: PLX_GPIO=%x\n",
1199 __func__, pv);
1200 }
1201 spin_unlock_irqrestore(&HFClock, hfc_flags);
1202 hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */
1203 }
1204
1205 /* we only want the real Z2 read-pointer for revision > 0 */
1206 if (!test_bit(HFC_CHIP_REVISION0, &hc->chip))
1207 hc->hw.r_ram_sz |= V_FZ_MD;
1208
1209 /* select pcm mode */
1210 if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
1211 if (debug & DEBUG_HFCMULTI_INIT)
1212 printk(KERN_DEBUG "%s: setting PCM into slave mode\n",
1213 __func__);
1214 } else
1215 if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip) && !plxsd_master) {
1216 if (debug & DEBUG_HFCMULTI_INIT)
1217 printk(KERN_DEBUG "%s: setting PCM into master mode\n",
1218 __func__);
1219 hc->hw.r_pcm_md0 |= V_PCM_MD;
1220 } else {
1221 if (debug & DEBUG_HFCMULTI_INIT)
1222 printk(KERN_DEBUG "%s: performing PCM auto detect\n",
1223 __func__);
1224 }
1225
1226 /* soft reset */
1227 HFC_outb(hc, R_CTRL, hc->hw.r_ctrl);
1228 HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
1229 HFC_outb(hc, R_FIFO_MD, 0);
1230 hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES | V_RLD_EPR;
1231 HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
1232 udelay(100);
1233 hc->hw.r_cirm = 0;
1234 HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
1235 udelay(100);
1236 HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
1237
1238 /* Speech Design PLX bridge pcm and sync mode */
1239 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
1240 spin_lock_irqsave(&plx_lock, plx_flags);
1241 plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
1242 pv = readl(plx_acc_32);
1243 /* Connect PCM */
1244 if (hc->hw.r_pcm_md0 & V_PCM_MD) {
1245 pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
1246 pv |= PLX_SYNC_O_EN;
1247 if (debug & DEBUG_HFCMULTI_INIT)
1248 printk(KERN_WARNING "%s: master: PLX_GPIO=%x\n",
1249 __func__, pv);
1250 } else {
1251 pv &= ~(PLX_MASTER_EN | PLX_SLAVE_EN_N);
1252 pv &= ~PLX_SYNC_O_EN;
1253 if (debug & DEBUG_HFCMULTI_INIT)
1254 printk(KERN_WARNING "%s: slave: PLX_GPIO=%x\n",
1255 __func__, pv);
1256 }
1257 writel(pv, plx_acc_32);
1258 spin_unlock_irqrestore(&plx_lock, plx_flags);
1259 }
1260
1261 /* PCM setup */
1262 HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x90);
1263 if (hc->slots == 32)
1264 HFC_outb(hc, R_PCM_MD1, 0x00);
1265 if (hc->slots == 64)
1266 HFC_outb(hc, R_PCM_MD1, 0x10);
1267 if (hc->slots == 128)
1268 HFC_outb(hc, R_PCM_MD1, 0x20);
1269 HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0xa0);
1270 if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
1271 HFC_outb(hc, R_PCM_MD2, V_SYNC_SRC); /* sync via SYNC_I / O */
1272 else
1273 HFC_outb(hc, R_PCM_MD2, 0x00); /* sync from interface */
1274 HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
1275 for (i = 0; i < 256; i++) {
1276 HFC_outb_nodebug(hc, R_SLOT, i);
1277 HFC_outb_nodebug(hc, A_SL_CFG, 0);
1278 HFC_outb_nodebug(hc, A_CONF, 0);
1279 hc->slot_owner[i] = -1;
1280 }
1281
1282 /* set clock speed */
1283 if (test_bit(HFC_CHIP_CLOCK2, &hc->chip)) {
1284 if (debug & DEBUG_HFCMULTI_INIT)
1285 printk(KERN_DEBUG
1286 "%s: setting double clock\n", __func__);
1287 HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
1288 }
1289
1290 /* B410P GPIO */
1291 if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
1292 printk(KERN_NOTICE "Setting GPIOs\n");
1293 HFC_outb(hc, R_GPIO_SEL, 0x30);
1294 HFC_outb(hc, R_GPIO_EN1, 0x3);
1295 udelay(1000);
1296 printk(KERN_NOTICE "calling vpm_init\n");
1297 vpm_init(hc);
1298 }
1299
1300 /* check if R_F0_CNT counts (8 kHz frame count) */
1301 val = HFC_inb(hc, R_F0_CNTL);
1302 val += HFC_inb(hc, R_F0_CNTH) << 8;
1303 if (debug & DEBUG_HFCMULTI_INIT)
1304 printk(KERN_DEBUG
1305 "HFC_multi F0_CNT %ld after reset\n", val);
1306 spin_unlock_irqrestore(&hc->lock, flags);
1307 set_current_state(TASK_UNINTERRUPTIBLE);
1308 schedule_timeout((HZ/100)?:1); /* Timeout minimum 10ms */
1309 spin_lock_irqsave(&hc->lock, flags);
1310 val2 = HFC_inb(hc, R_F0_CNTL);
1311 val2 += HFC_inb(hc, R_F0_CNTH) << 8;
1312 if (debug & DEBUG_HFCMULTI_INIT)
1313 printk(KERN_DEBUG
1314 "HFC_multi F0_CNT %ld after 10 ms (1st try)\n",
1315 val2);
1316 if (val2 >= val+8) { /* 1 ms */
1317 /* it counts, so we keep the pcm mode */
1318 if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
1319 printk(KERN_INFO "controller is PCM bus MASTER\n");
1320 else
1321 if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip))
1322 printk(KERN_INFO "controller is PCM bus SLAVE\n");
1323 else {
1324 test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
1325 printk(KERN_INFO "controller is PCM bus SLAVE "
1326 "(auto detected)\n");
1327 }
1328 } else {
1329 /* does not count */
1330 if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
1331controller_fail:
1332 printk(KERN_ERR "HFC_multi ERROR, getting no 125us "
1333 "pulse. Seems that controller fails.\n");
1334 err = -EIO;
1335 goto out;
1336 }
1337 if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
1338 printk(KERN_INFO "controller is PCM bus SLAVE "
1339 "(ignoring missing PCM clock)\n");
1340 } else {
1341 /* only one pcm master */
1342 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)
1343 && plxsd_master) {
1344 printk(KERN_ERR "HFC_multi ERROR, no clock "
1345 "on another Speech Design card found. "
1346 "Please be sure to connect PCM cable.\n");
1347 err = -EIO;
1348 goto out;
1349 }
1350 /* retry with master clock */
1351 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
1352 spin_lock_irqsave(&plx_lock, plx_flags);
1353 plx_acc_32 = (u_int *)(hc->plx_membase +
1354 PLX_GPIOC);
1355 pv = readl(plx_acc_32);
1356 pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
1357 pv |= PLX_SYNC_O_EN;
1358 writel(pv, plx_acc_32);
1359 spin_unlock_irqrestore(&plx_lock, plx_flags);
1360 if (debug & DEBUG_HFCMULTI_INIT)
1361 printk(KERN_WARNING "%s: master: PLX_GPIO"
1362 "=%x\n", __func__, pv);
1363 }
1364 hc->hw.r_pcm_md0 |= V_PCM_MD;
1365 HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
1366 spin_unlock_irqrestore(&hc->lock, flags);
1367 set_current_state(TASK_UNINTERRUPTIBLE);
1368 schedule_timeout((HZ/100)?:1); /* Timeout min. 10ms */
1369 spin_lock_irqsave(&hc->lock, flags);
1370 val2 = HFC_inb(hc, R_F0_CNTL);
1371 val2 += HFC_inb(hc, R_F0_CNTH) << 8;
1372 if (debug & DEBUG_HFCMULTI_INIT)
1373 printk(KERN_DEBUG "HFC_multi F0_CNT %ld after "
1374 "10 ms (2nd try)\n", val2);
1375 if (val2 >= val+8) { /* 1 ms */
1376 test_and_set_bit(HFC_CHIP_PCM_MASTER,
1377 &hc->chip);
1378 printk(KERN_INFO "controller is PCM bus MASTER "
1379 "(auto detected)\n");
1380 } else
1381 goto controller_fail;
1382 }
1383 }
1384
1385 /* Release the DSP Reset */
1386 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
1387 if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
1388 plxsd_master = 1;
1389 spin_lock_irqsave(&plx_lock, plx_flags);
1390 plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
1391 pv = readl(plx_acc_32);
1392 pv |= PLX_DSP_RES_N;
1393 writel(pv, plx_acc_32);
1394 spin_unlock_irqrestore(&plx_lock, plx_flags);
1395 if (debug & DEBUG_HFCMULTI_INIT)
1396 printk(KERN_WARNING "%s: reset off: PLX_GPIO=%x\n",
1397 __func__, pv);
1398 }
1399
1400 /* pcm id */
1401 if (hc->pcm)
1402 printk(KERN_INFO "controller has given PCM BUS ID %d\n",
1403 hc->pcm);
1404 else {
1405 if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)
1406 || test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
1407 PCM_cnt++; /* SD has proprietary bridging */
1408 }
1409 hc->pcm = PCM_cnt;
1410 printk(KERN_INFO "controller has PCM BUS ID %d "
1411 "(auto selected)\n", hc->pcm);
1412 }
1413
1414 /* set up timer */
1415 HFC_outb(hc, R_TI_WD, poll_timer);
1416 hc->hw.r_irqmsk_misc |= V_TI_IRQMSK;
1417
1418 /*
1419 * set up 125us interrupt, only if function pointer is available
1420 * and module parameter timer is set
1421 */
1422 if (timer && hfc_interrupt && register_interrupt) {
1423 /* only one chip should use this interrupt */
1424 timer = 0;
1425 interrupt_registered = 1;
1426 hc->hw.r_irqmsk_misc |= V_PROC_IRQMSK;
1427 /* deactivate other interrupts in ztdummy */
1428 register_interrupt();
1429 }
1430
1431 /* set E1 state machine IRQ */
1432 if (hc->type == 1)
1433 hc->hw.r_irqmsk_misc |= V_STA_IRQMSK;
1434
1435 /* set DTMF detection */
1436 if (test_bit(HFC_CHIP_DTMF, &hc->chip)) {
1437 if (debug & DEBUG_HFCMULTI_INIT)
1438 printk(KERN_DEBUG "%s: enabling DTMF detection "
1439 "for all B-channel\n", __func__);
1440 hc->hw.r_dtmf = V_DTMF_EN | V_DTMF_STOP;
1441 if (test_bit(HFC_CHIP_ULAW, &hc->chip))
1442 hc->hw.r_dtmf |= V_ULAW_SEL;
1443 HFC_outb(hc, R_DTMF_N, 102 - 1);
1444 hc->hw.r_irqmsk_misc |= V_DTMF_IRQMSK;
1445 }
1446
1447 /* conference engine */
1448 if (test_bit(HFC_CHIP_ULAW, &hc->chip))
1449 r_conf_en = V_CONF_EN | V_ULAW;
1450 else
1451 r_conf_en = V_CONF_EN;
1452 HFC_outb(hc, R_CONF_EN, r_conf_en);
1453
1454 /* setting leds */
1455 switch (hc->leds) {
1456 case 1: /* HFC-E1 OEM */
1457 if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip))
1458 HFC_outb(hc, R_GPIO_SEL, 0x32);
1459 else
1460 HFC_outb(hc, R_GPIO_SEL, 0x30);
1461
1462 HFC_outb(hc, R_GPIO_EN1, 0x0f);
1463 HFC_outb(hc, R_GPIO_OUT1, 0x00);
1464
1465 HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3);
1466 break;
1467
1468 case 2: /* HFC-4S OEM */
1469 case 3:
1470 HFC_outb(hc, R_GPIO_SEL, 0xf0);
1471 HFC_outb(hc, R_GPIO_EN1, 0xff);
1472 HFC_outb(hc, R_GPIO_OUT1, 0x00);
1473 break;
1474 }
1475
1476 /* set master clock */
1477 if (hc->masterclk >= 0) {
1478 if (debug & DEBUG_HFCMULTI_INIT)
1479 printk(KERN_DEBUG "%s: setting ST master clock "
1480 "to port %d (0..%d)\n",
1481 __func__, hc->masterclk, hc->ports-1);
1482 hc->hw.r_st_sync = hc->masterclk | V_AUTO_SYNC;
1483 HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync);
1484 }
1485
1486 /* setting misc irq */
1487 HFC_outb(hc, R_IRQMSK_MISC, hc->hw.r_irqmsk_misc);
1488 if (debug & DEBUG_HFCMULTI_INIT)
1489 printk(KERN_DEBUG "r_irqmsk_misc.2: 0x%x\n",
1490 hc->hw.r_irqmsk_misc);
1491
1492 /* RAM access test */
1493 HFC_outb(hc, R_RAM_ADDR0, 0);
1494 HFC_outb(hc, R_RAM_ADDR1, 0);
1495 HFC_outb(hc, R_RAM_ADDR2, 0);
1496 for (i = 0; i < 256; i++) {
1497 HFC_outb_nodebug(hc, R_RAM_ADDR0, i);
1498 HFC_outb_nodebug(hc, R_RAM_DATA, ((i*3)&0xff));
1499 }
1500 for (i = 0; i < 256; i++) {
1501 HFC_outb_nodebug(hc, R_RAM_ADDR0, i);
1502 HFC_inb_nodebug(hc, R_RAM_DATA);
1503 rval = HFC_inb_nodebug(hc, R_INT_DATA);
1504 if (rval != ((i * 3) & 0xff)) {
1505 printk(KERN_DEBUG
1506 "addr:%x val:%x should:%x\n", i, rval,
1507 (i * 3) & 0xff);
1508 err++;
1509 }
1510 }
1511 if (err) {
1512 printk(KERN_DEBUG "aborting - %d RAM access errors\n", err);
1513 err = -EIO;
1514 goto out;
1515 }
1516
1517 if (debug & DEBUG_HFCMULTI_INIT)
1518 printk(KERN_DEBUG "%s: done\n", __func__);
1519out:
1520 spin_unlock_irqrestore(&hc->lock, flags);
1521 return err;
1522}
1523
1524
1525/*
1526 * control the watchdog
1527 */
1528static void
1529hfcmulti_watchdog(struct hfc_multi *hc)
1530{
1531 hc->wdcount++;
1532
1533 if (hc->wdcount > 10) {
1534 hc->wdcount = 0;
1535 hc->wdbyte = hc->wdbyte == V_GPIO_OUT2 ?
1536 V_GPIO_OUT3 : V_GPIO_OUT2;
1537
1538 /* printk("Sending Watchdog Kill %x\n",hc->wdbyte); */
1539 HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3);
1540 HFC_outb(hc, R_GPIO_OUT0, hc->wdbyte);
1541 }
1542}
1543
1544
1545
1546/*
1547 * output leds
1548 */
1549static void
1550hfcmulti_leds(struct hfc_multi *hc)
1551{
1552 unsigned long lled;
1553 unsigned long leddw;
1554 int i, state, active, leds;
1555 struct dchannel *dch;
1556 int led[4];
1557
1558 hc->ledcount += poll;
1559 if (hc->ledcount > 4096) {
1560 hc->ledcount -= 4096;
1561 hc->ledstate = 0xAFFEAFFE;
1562 }
1563
1564 switch (hc->leds) {
1565 case 1: /* HFC-E1 OEM */
1566 /* 2 red blinking: NT mode deactivate
1567 * 2 red steady: TE mode deactivate
1568 * left green: L1 active
1569 * left red: frame sync, but no L1
1570 * right green: L2 active
1571 */
1572 if (hc->chan[hc->dslot].sync != 2) { /* no frame sync */
1573 if (hc->chan[hc->dslot].dch->dev.D.protocol
1574 != ISDN_P_NT_E1) {
1575 led[0] = 1;
1576 led[1] = 1;
1577 } else if (hc->ledcount>>11) {
1578 led[0] = 1;
1579 led[1] = 1;
1580 } else {
1581 led[0] = 0;
1582 led[1] = 0;
1583 }
1584 led[2] = 0;
1585 led[3] = 0;
1586 } else { /* with frame sync */
1587 /* TODO make it work */
1588 led[0] = 0;
1589 led[1] = 0;
1590 led[2] = 0;
1591 led[3] = 1;
1592 }
1593 leds = (led[0] | (led[1]<<2) | (led[2]<<1) | (led[3]<<3))^0xF;
1594 /* leds are inverted */
1595 if (leds != (int)hc->ledstate) {
1596 HFC_outb_nodebug(hc, R_GPIO_OUT1, leds);
1597 hc->ledstate = leds;
1598 }
1599 break;
1600
1601 case 2: /* HFC-4S OEM */
1602 /* red blinking = PH_DEACTIVATE NT Mode
1603 * red steady = PH_DEACTIVATE TE Mode
1604 * green steady = PH_ACTIVATE
1605 */
1606 for (i = 0; i < 4; i++) {
1607 state = 0;
1608 active = -1;
1609 dch = hc->chan[(i << 2) | 2].dch;
1610 if (dch) {
1611 state = dch->state;
1612 if (dch->dev.D.protocol == ISDN_P_NT_S0)
1613 active = 3;
1614 else
1615 active = 7;
1616 }
1617 if (state) {
1618 if (state == active) {
1619 led[i] = 1; /* led green */
1620 } else
1621 if (dch->dev.D.protocol == ISDN_P_TE_S0)
1622 /* TE mode: led red */
1623 led[i] = 2;
1624 else
1625 if (hc->ledcount>>11)
1626 /* led red */
1627 led[i] = 2;
1628 else
1629 /* led off */
1630 led[i] = 0;
1631 } else
1632 led[i] = 0; /* led off */
1633 }
1634 if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
1635 leds = 0;
1636 for (i = 0; i < 4; i++) {
1637 if (led[i] == 1) {
1638 /*green*/
1639 leds |= (0x2 << (i * 2));
1640 } else if (led[i] == 2) {
1641 /*red*/
1642 leds |= (0x1 << (i * 2));
1643 }
1644 }
1645 if (leds != (int)hc->ledstate) {
1646 vpm_out(hc, 0, 0x1a8 + 3, leds);
1647 hc->ledstate = leds;
1648 }
1649 } else {
1650 leds = ((led[3] > 0) << 0) | ((led[1] > 0) << 1) |
1651 ((led[0] > 0) << 2) | ((led[2] > 0) << 3) |
1652 ((led[3] & 1) << 4) | ((led[1] & 1) << 5) |
1653 ((led[0] & 1) << 6) | ((led[2] & 1) << 7);
1654 if (leds != (int)hc->ledstate) {
1655 HFC_outb_nodebug(hc, R_GPIO_EN1, leds & 0x0F);
1656 HFC_outb_nodebug(hc, R_GPIO_OUT1, leds >> 4);
1657 hc->ledstate = leds;
1658 }
1659 }
1660 break;
1661
1662 case 3: /* HFC 1S/2S Beronet */
1663 /* red blinking = PH_DEACTIVATE NT Mode
1664 * red steady = PH_DEACTIVATE TE Mode
1665 * green steady = PH_ACTIVATE
1666 */
1667 for (i = 0; i < 2; i++) {
1668 state = 0;
1669 active = -1;
1670 dch = hc->chan[(i << 2) | 2].dch;
1671 if (dch) {
1672 state = dch->state;
1673 if (dch->dev.D.protocol == ISDN_P_NT_S0)
1674 active = 3;
1675 else
1676 active = 7;
1677 }
1678 if (state) {
1679 if (state == active) {
1680 led[i] = 1; /* led green */
1681 } else
1682 if (dch->dev.D.protocol == ISDN_P_TE_S0)
1683 /* TE mode: led red */
1684 led[i] = 2;
1685 else
1686 if (hc->ledcount >> 11)
1687 /* led red */
1688 led[i] = 2;
1689 else
1690 /* led off */
1691 led[i] = 0;
1692 } else
1693 led[i] = 0; /* led off */
1694 }
1695
1696
1697 leds = (led[0] > 0) | ((led[1] > 0)<<1) | ((led[0]&1)<<2)
1698 | ((led[1]&1)<<3);
1699 if (leds != (int)hc->ledstate) {
1700 HFC_outb_nodebug(hc, R_GPIO_EN1,
1701 ((led[0] > 0) << 2) | ((led[1] > 0) << 3));
1702 HFC_outb_nodebug(hc, R_GPIO_OUT1,
1703 ((led[0] & 1) << 2) | ((led[1] & 1) << 3));
1704 hc->ledstate = leds;
1705 }
1706 break;
1707 case 8: /* HFC 8S+ Beronet */
1708 lled = 0;
1709
1710 for (i = 0; i < 8; i++) {
1711 state = 0;
1712 active = -1;
1713 dch = hc->chan[(i << 2) | 2].dch;
1714 if (dch) {
1715 state = dch->state;
1716 if (dch->dev.D.protocol == ISDN_P_NT_S0)
1717 active = 3;
1718 else
1719 active = 7;
1720 }
1721 if (state) {
1722 if (state == active) {
1723 lled |= 0 << i;
1724 } else
1725 if (hc->ledcount >> 11)
1726 lled |= 0 << i;
1727 else
1728 lled |= 1 << i;
1729 } else
1730 lled |= 1 << i;
1731 }
1732 leddw = lled << 24 | lled << 16 | lled << 8 | lled;
1733 if (leddw != hc->ledstate) {
1734 /* HFC_outb(hc, R_BRG_PCM_CFG, 1);
1735 HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); */
1736 /* was _io before */
1737 HFC_outb_nodebug(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
1738 outw(0x4000, hc->pci_iobase + 4);
1739 outl(leddw, hc->pci_iobase);
1740 HFC_outb_nodebug(hc, R_BRG_PCM_CFG, V_PCM_CLK);
1741 hc->ledstate = leddw;
1742 }
1743 break;
1744 }
1745}
1746/*
1747 * read dtmf coefficients
1748 */
1749
1750static void
1751hfcmulti_dtmf(struct hfc_multi *hc)
1752{
1753 s32 *coeff;
1754 u_int mantissa;
1755 int co, ch;
1756 struct bchannel *bch = NULL;
1757 u8 exponent;
1758 int dtmf = 0;
1759 int addr;
1760 u16 w_float;
1761 struct sk_buff *skb;
1762 struct mISDNhead *hh;
1763
1764 if (debug & DEBUG_HFCMULTI_DTMF)
1765 printk(KERN_DEBUG "%s: dtmf detection irq\n", __func__);
1766 for (ch = 0; ch <= 31; ch++) {
1767 /* only process enabled B-channels */
1768 bch = hc->chan[ch].bch;
1769 if (!bch)
1770 continue;
1771 if (!hc->created[hc->chan[ch].port])
1772 continue;
1773 if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
1774 continue;
1775 if (debug & DEBUG_HFCMULTI_DTMF)
1776 printk(KERN_DEBUG "%s: dtmf channel %d:",
1777 __func__, ch);
1778 coeff = &(hc->chan[ch].coeff[hc->chan[ch].coeff_count * 16]);
1779 dtmf = 1;
1780 for (co = 0; co < 8; co++) {
1781 /* read W(n-1) coefficient */
1782 addr = hc->DTMFbase + ((co<<7) | (ch<<2));
1783 HFC_outb_nodebug(hc, R_RAM_ADDR0, addr);
1784 HFC_outb_nodebug(hc, R_RAM_ADDR1, addr>>8);
1785 HFC_outb_nodebug(hc, R_RAM_ADDR2, (addr>>16)
1786 | V_ADDR_INC);
1787 w_float = HFC_inb_nodebug(hc, R_RAM_DATA);
1788 w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8);
1789 if (debug & DEBUG_HFCMULTI_DTMF)
1790 printk(" %04x", w_float);
1791
1792 /* decode float (see chip doc) */
1793 mantissa = w_float & 0x0fff;
1794 if (w_float & 0x8000)
1795 mantissa |= 0xfffff000;
1796 exponent = (w_float>>12) & 0x7;
1797 if (exponent) {
1798 mantissa ^= 0x1000;
1799 mantissa <<= (exponent-1);
1800 }
1801
1802 /* store coefficient */
1803 coeff[co<<1] = mantissa;
1804
1805 /* read W(n) coefficient */
1806 w_float = HFC_inb_nodebug(hc, R_RAM_DATA);
1807 w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8);
1808 if (debug & DEBUG_HFCMULTI_DTMF)
1809 printk(" %04x", w_float);
1810
1811 /* decode float (see chip doc) */
1812 mantissa = w_float & 0x0fff;
1813 if (w_float & 0x8000)
1814 mantissa |= 0xfffff000;
1815 exponent = (w_float>>12) & 0x7;
1816 if (exponent) {
1817 mantissa ^= 0x1000;
1818 mantissa <<= (exponent-1);
1819 }
1820
1821 /* store coefficient */
1822 coeff[(co<<1)|1] = mantissa;
1823 }
1824 if (debug & DEBUG_HFCMULTI_DTMF)
1825 printk("%s: DTMF ready %08x %08x %08x %08x "
1826 "%08x %08x %08x %08x\n", __func__,
1827 coeff[0], coeff[1], coeff[2], coeff[3],
1828 coeff[4], coeff[5], coeff[6], coeff[7]);
1829 hc->chan[ch].coeff_count++;
1830 if (hc->chan[ch].coeff_count == 8) {
1831 hc->chan[ch].coeff_count = 0;
1832 skb = mI_alloc_skb(512, GFP_ATOMIC);
1833 if (!skb) {
1834 printk(KERN_WARNING "%s: No memory for skb\n",
1835 __func__);
1836 continue;
1837 }
1838 hh = mISDN_HEAD_P(skb);
1839 hh->prim = PH_CONTROL_IND;
1840 hh->id = DTMF_HFC_COEF;
1841 memcpy(skb_put(skb, 512), hc->chan[ch].coeff, 512);
1842 recv_Bchannel_skb(bch, skb);
1843 }
1844 }
1845
1846 /* restart DTMF processing */
1847 hc->dtmf = dtmf;
1848 if (dtmf)
1849 HFC_outb_nodebug(hc, R_DTMF, hc->hw.r_dtmf | V_RST_DTMF);
1850}
1851
1852
1853/*
1854 * fill fifo as much as possible
1855 */
1856
1857static void
1858hfcmulti_tx(struct hfc_multi *hc, int ch)
1859{
1860 int i, ii, temp, len = 0;
1861 int Zspace, z1, z2; /* must be int for calculation */
1862 int Fspace, f1, f2;
1863 u_char *d;
1864 int *txpending, slot_tx;
1865 struct bchannel *bch;
1866 struct dchannel *dch;
1867 struct sk_buff **sp = NULL;
1868 int *idxp;
1869
1870 bch = hc->chan[ch].bch;
1871 dch = hc->chan[ch].dch;
1872 if ((!dch) && (!bch))
1873 return;
1874
1875 txpending = &hc->chan[ch].txpending;
1876 slot_tx = hc->chan[ch].slot_tx;
1877 if (dch) {
1878 if (!test_bit(FLG_ACTIVE, &dch->Flags))
1879 return;
1880 sp = &dch->tx_skb;
1881 idxp = &dch->tx_idx;
1882 } else {
1883 if (!test_bit(FLG_ACTIVE, &bch->Flags))
1884 return;
1885 sp = &bch->tx_skb;
1886 idxp = &bch->tx_idx;
1887 }
1888 if (*sp)
1889 len = (*sp)->len;
1890
1891 if ((!len) && *txpending != 1)
1892 return; /* no data */
1893
1894 if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
1895 (hc->chan[ch].protocol == ISDN_P_B_RAW) &&
1896 (hc->chan[ch].slot_rx < 0) &&
1897 (hc->chan[ch].slot_tx < 0))
1898 HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch << 1));
1899 else
1900 HFC_outb_nodebug(hc, R_FIFO, ch << 1);
1901 HFC_wait_nodebug(hc);
1902
1903 if (*txpending == 2) {
1904 /* reset fifo */
1905 HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
1906 HFC_wait_nodebug(hc);
1907 HFC_outb(hc, A_SUBCH_CFG, 0);
1908 *txpending = 1;
1909 }
1910next_frame:
1911 if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
1912 f1 = HFC_inb_nodebug(hc, A_F1);
1913 f2 = HFC_inb_nodebug(hc, A_F2);
1914 while (f2 != (temp = HFC_inb_nodebug(hc, A_F2))) {
1915 if (debug & DEBUG_HFCMULTI_FIFO)
1916 printk(KERN_DEBUG
1917 "%s(card %d): reread f2 because %d!=%d\n",
1918 __func__, hc->id + 1, temp, f2);
1919 f2 = temp; /* repeat until F2 is equal */
1920 }
1921 Fspace = f2 - f1 - 1;
1922 if (Fspace < 0)
1923 Fspace += hc->Flen;
1924 /*
1925 * Old FIFO handling doesn't give us the current Z2 read
1926 * pointer, so we cannot send the next frame before the fifo
1927 * is empty. It makes no difference except for a slightly
1928 * lower performance.
1929 */
1930 if (test_bit(HFC_CHIP_REVISION0, &hc->chip)) {
1931 if (f1 != f2)
1932 Fspace = 0;
1933 else
1934 Fspace = 1;
1935 }
1936 /* one frame only for ST D-channels, to allow resending */
1937 if (hc->type != 1 && dch) {
1938 if (f1 != f2)
1939 Fspace = 0;
1940 }
1941 /* F-counter full condition */
1942 if (Fspace == 0)
1943 return;
1944 }
1945 z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin;
1946 z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin;
1947 while (z2 != (temp = (HFC_inw_nodebug(hc, A_Z2) - hc->Zmin))) {
1948 if (debug & DEBUG_HFCMULTI_FIFO)
1949 printk(KERN_DEBUG "%s(card %d): reread z2 because "
1950 "%d!=%d\n", __func__, hc->id + 1, temp, z2);
1951 z2 = temp; /* repeat unti Z2 is equal */
1952 }
1953 Zspace = z2 - z1;
1954 if (Zspace <= 0)
1955 Zspace += hc->Zlen;
1956 Zspace -= 4; /* keep not too full, so pointers will not overrun */
1957 /* fill transparent data only to maxinum transparent load (minus 4) */
1958 if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
1959 Zspace = Zspace - hc->Zlen + hc->max_trans;
1960 if (Zspace <= 0) /* no space of 4 bytes */
1961 return;
1962
1963 /* if no data */
1964 if (!len) {
1965 if (z1 == z2) { /* empty */
1966 /* if done with FIFO audio data during PCM connection */
1967 if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) &&
1968 *txpending && slot_tx >= 0) {
1969 if (debug & DEBUG_HFCMULTI_MODE)
1970 printk(KERN_DEBUG
1971 "%s: reconnecting PCM due to no "
1972 "more FIFO data: channel %d "
1973 "slot_tx %d\n",
1974 __func__, ch, slot_tx);
1975 /* connect slot */
1976 HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
1977 V_HDLC_TRP | V_IFF);
1978 HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
1979 HFC_wait_nodebug(hc);
1980 HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
1981 V_HDLC_TRP | V_IFF);
1982 HFC_outb_nodebug(hc, R_FIFO, ch<<1);
1983 HFC_wait_nodebug(hc);
1984 }
1985 *txpending = 0;
1986 }
1987 return; /* no data */
1988 }
1989
1990 /* if audio data and connected slot */
1991 if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) && (!*txpending)
1992 && slot_tx >= 0) {
1993 if (debug & DEBUG_HFCMULTI_MODE)
1994 printk(KERN_DEBUG "%s: disconnecting PCM due to "
1995 "FIFO data: channel %d slot_tx %d\n",
1996 __func__, ch, slot_tx);
1997 /* disconnect slot */
1998 HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
1999 HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
2000 HFC_wait_nodebug(hc);
2001 HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
2002 HFC_outb_nodebug(hc, R_FIFO, ch<<1);
2003 HFC_wait_nodebug(hc);
2004 }
2005 *txpending = 1;
2006
2007 /* show activity */
2008 hc->activity[hc->chan[ch].port] = 1;
2009
2010 /* fill fifo to what we have left */
2011 ii = len;
2012 if (dch || test_bit(FLG_HDLC, &bch->Flags))
2013 temp = 1;
2014 else
2015 temp = 0;
2016 i = *idxp;
2017 d = (*sp)->data + i;
2018 if (ii - i > Zspace)
2019 ii = Zspace + i;
2020 if (debug & DEBUG_HFCMULTI_FIFO)
2021 printk(KERN_DEBUG "%s(card %d): fifo(%d) has %d bytes space "
2022 "left (z1=%04x, z2=%04x) sending %d of %d bytes %s\n",
2023 __func__, hc->id + 1, ch, Zspace, z1, z2, ii-i, len-i,
2024 temp ? "HDLC":"TRANS");
2025
2026
2027 /* Have to prep the audio data */
2028 hc->write_fifo(hc, d, ii - i);
2029 *idxp = ii;
2030
2031 /* if not all data has been written */
2032 if (ii != len) {
2033 /* NOTE: fifo is started by the calling function */
2034 return;
2035 }
2036
2037 /* if all data has been written, terminate frame */
2038 if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
2039 /* increment f-counter */
2040 HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F);
2041 HFC_wait_nodebug(hc);
2042 }
2043
2044 /* send confirm, since get_net_bframe will not do it with trans */
2045 if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
2046 confirm_Bsend(bch);
2047
2048 /* check for next frame */
2049 dev_kfree_skb(*sp);
2050 if (bch && get_next_bframe(bch)) { /* hdlc is confirmed here */
2051 len = (*sp)->len;
2052 goto next_frame;
2053 }
2054 if (dch && get_next_dframe(dch)) {
2055 len = (*sp)->len;
2056 goto next_frame;
2057 }
2058
2059 /*
2060 * now we have no more data, so in case of transparent,
2061 * we set the last byte in fifo to 'silence' in case we will get
2062 * no more data at all. this prevents sending an undefined value.
2063 */
2064 if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
2065 HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
2066}
2067
2068
2069/* NOTE: only called if E1 card is in active state */
2070static void
2071hfcmulti_rx(struct hfc_multi *hc, int ch)
2072{
2073 int temp;
2074 int Zsize, z1, z2 = 0; /* = 0, to make GCC happy */
2075 int f1 = 0, f2 = 0; /* = 0, to make GCC happy */
2076 int again = 0;
2077 struct bchannel *bch;
2078 struct dchannel *dch;
2079 struct sk_buff *skb, **sp = NULL;
2080 int maxlen;
2081
2082 bch = hc->chan[ch].bch;
2083 dch = hc->chan[ch].dch;
2084 if ((!dch) && (!bch))
2085 return;
2086 if (dch) {
2087 if (!test_bit(FLG_ACTIVE, &dch->Flags))
2088 return;
2089 sp = &dch->rx_skb;
2090 maxlen = dch->maxlen;
2091 } else {
2092 if (!test_bit(FLG_ACTIVE, &bch->Flags))
2093 return;
2094 sp = &bch->rx_skb;
2095 maxlen = bch->maxlen;
2096 }
2097next_frame:
2098 /* on first AND before getting next valid frame, R_FIFO must be written
2099 to. */
2100 if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
2101 (hc->chan[ch].protocol == ISDN_P_B_RAW) &&
2102 (hc->chan[ch].slot_rx < 0) &&
2103 (hc->chan[ch].slot_tx < 0))
2104 HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch<<1) | 1);
2105 else
2106 HFC_outb_nodebug(hc, R_FIFO, (ch<<1)|1);
2107 HFC_wait_nodebug(hc);
2108
2109 /* ignore if rx is off BUT change fifo (above) to start pending TX */
2110 if (hc->chan[ch].rx_off)
2111 return;
2112
2113 if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
2114 f1 = HFC_inb_nodebug(hc, A_F1);
2115 while (f1 != (temp = HFC_inb_nodebug(hc, A_F1))) {
2116 if (debug & DEBUG_HFCMULTI_FIFO)
2117 printk(KERN_DEBUG
2118 "%s(card %d): reread f1 because %d!=%d\n",
2119 __func__, hc->id + 1, temp, f1);
2120 f1 = temp; /* repeat until F1 is equal */
2121 }
2122 f2 = HFC_inb_nodebug(hc, A_F2);
2123 }
2124 z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin;
2125 while (z1 != (temp = (HFC_inw_nodebug(hc, A_Z1) - hc->Zmin))) {
2126 if (debug & DEBUG_HFCMULTI_FIFO)
2127 printk(KERN_DEBUG "%s(card %d): reread z2 because "
2128 "%d!=%d\n", __func__, hc->id + 1, temp, z2);
2129 z1 = temp; /* repeat until Z1 is equal */
2130 }
2131 z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin;
2132 Zsize = z1 - z2;
2133 if ((dch || test_bit(FLG_HDLC, &bch->Flags)) && f1 != f2)
2134 /* complete hdlc frame */
2135 Zsize++;
2136 if (Zsize < 0)
2137 Zsize += hc->Zlen;
2138 /* if buffer is empty */
2139 if (Zsize <= 0)
2140 return;
2141
2142 if (*sp == NULL) {
2143 *sp = mI_alloc_skb(maxlen + 3, GFP_ATOMIC);
2144 if (*sp == NULL) {
2145 printk(KERN_DEBUG "%s: No mem for rx_skb\n",
2146 __func__);
2147 return;
2148 }
2149 }
2150 /* show activity */
2151 hc->activity[hc->chan[ch].port] = 1;
2152
2153 /* empty fifo with what we have */
2154 if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
2155 if (debug & DEBUG_HFCMULTI_FIFO)
2156 printk(KERN_DEBUG "%s(card %d): fifo(%d) reading %d "
2157 "bytes (z1=%04x, z2=%04x) HDLC %s (f1=%d, f2=%d) "
2158 "got=%d (again %d)\n", __func__, hc->id + 1, ch,
2159 Zsize, z1, z2, (f1 == f2) ? "fragment" : "COMPLETE",
2160 f1, f2, Zsize + (*sp)->len, again);
2161 /* HDLC */
2162 if ((Zsize + (*sp)->len) > (maxlen + 3)) {
2163 if (debug & DEBUG_HFCMULTI_FIFO)
2164 printk(KERN_DEBUG
2165 "%s(card %d): hdlc-frame too large.\n",
2166 __func__, hc->id + 1);
2167 skb_trim(*sp, 0);
2168 HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
2169 HFC_wait_nodebug(hc);
2170 return;
2171 }
2172
2173 hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize);
2174
2175 if (f1 != f2) {
2176 /* increment Z2,F2-counter */
2177 HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F);
2178 HFC_wait_nodebug(hc);
2179 /* check size */
2180 if ((*sp)->len < 4) {
2181 if (debug & DEBUG_HFCMULTI_FIFO)
2182 printk(KERN_DEBUG
2183 "%s(card %d): Frame below minimum "
2184 "size\n", __func__, hc->id + 1);
2185 skb_trim(*sp, 0);
2186 goto next_frame;
2187 }
2188 /* there is at least one complete frame, check crc */
2189 if ((*sp)->data[(*sp)->len - 1]) {
2190 if (debug & DEBUG_HFCMULTI_CRC)
2191 printk(KERN_DEBUG
2192 "%s: CRC-error\n", __func__);
2193 skb_trim(*sp, 0);
2194 goto next_frame;
2195 }
2196 skb_trim(*sp, (*sp)->len - 3);
2197 if ((*sp)->len < MISDN_COPY_SIZE) {
2198 skb = *sp;
2199 *sp = mI_alloc_skb(skb->len, GFP_ATOMIC);
2200 if (*sp) {
2201 memcpy(skb_put(*sp, skb->len),
2202 skb->data, skb->len);
2203 skb_trim(skb, 0);
2204 } else {
2205 printk(KERN_DEBUG "%s: No mem\n",
2206 __func__);
2207 *sp = skb;
2208 skb = NULL;
2209 }
2210 } else {
2211 skb = NULL;
2212 }
2213 if (debug & DEBUG_HFCMULTI_FIFO) {
2214 printk(KERN_DEBUG "%s(card %d):",
2215 __func__, hc->id + 1);
2216 temp = 0;
2217 while (temp < (*sp)->len)
2218 printk(" %02x", (*sp)->data[temp++]);
2219 printk("\n");
2220 }
2221 if (dch)
2222 recv_Dchannel(dch);
2223 else
2224 recv_Bchannel(bch);
2225 *sp = skb;
2226 again++;
2227 goto next_frame;
2228 }
2229 /* there is an incomplete frame */
2230 } else {
2231 /* transparent */
2232 if (Zsize > skb_tailroom(*sp))
2233 Zsize = skb_tailroom(*sp);
2234 hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize);
2235 if (((*sp)->len) < MISDN_COPY_SIZE) {
2236 skb = *sp;
2237 *sp = mI_alloc_skb(skb->len, GFP_ATOMIC);
2238 if (*sp) {
2239 memcpy(skb_put(*sp, skb->len),
2240 skb->data, skb->len);
2241 skb_trim(skb, 0);
2242 } else {
2243 printk(KERN_DEBUG "%s: No mem\n", __func__);
2244 *sp = skb;
2245 skb = NULL;
2246 }
2247 } else {
2248 skb = NULL;
2249 }
2250 if (debug & DEBUG_HFCMULTI_FIFO)
2251 printk(KERN_DEBUG
2252 "%s(card %d): fifo(%d) reading %d bytes "
2253 "(z1=%04x, z2=%04x) TRANS\n",
2254 __func__, hc->id + 1, ch, Zsize, z1, z2);
2255 /* only bch is transparent */
2256 recv_Bchannel(bch);
2257 *sp = skb;
2258 }
2259}
2260
2261
2262/*
2263 * Interrupt handler
2264 */
2265static void
2266signal_state_up(struct dchannel *dch, int info, char *msg)
2267{
2268 struct sk_buff *skb;
2269 int id, data = info;
2270
2271 if (debug & DEBUG_HFCMULTI_STATE)
2272 printk(KERN_DEBUG "%s: %s\n", __func__, msg);
2273
2274 id = TEI_SAPI | (GROUP_TEI << 8); /* manager address */
2275
2276 skb = _alloc_mISDN_skb(MPH_INFORMATION_IND, id, sizeof(data), &data,
2277 GFP_ATOMIC);
2278 if (!skb)
2279 return;
2280 recv_Dchannel_skb(dch, skb);
2281}
2282
2283static inline void
2284handle_timer_irq(struct hfc_multi *hc)
2285{
2286 int ch, temp;
2287 struct dchannel *dch;
2288 u_long flags;
2289
2290 /* process queued resync jobs */
2291 if (hc->e1_resync) {
2292 /* lock, so e1_resync gets not changed */
2293 spin_lock_irqsave(&HFClock, flags);
2294 if (hc->e1_resync & 1) {
2295 if (debug & DEBUG_HFCMULTI_PLXSD)
2296 printk(KERN_DEBUG "Enable SYNC_I\n");
2297 HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC);
2298 /* disable JATT, if RX_SYNC is set */
2299 if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip))
2300 HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX);
2301 }
2302 if (hc->e1_resync & 2) {
2303 if (debug & DEBUG_HFCMULTI_PLXSD)
2304 printk(KERN_DEBUG "Enable jatt PLL\n");
2305 HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS);
2306 }
2307 if (hc->e1_resync & 4) {
2308 if (debug & DEBUG_HFCMULTI_PLXSD)
2309 printk(KERN_DEBUG
2310 "Enable QUARTZ for HFC-E1\n");
2311 /* set jatt to quartz */
2312 HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC
2313 | V_JATT_OFF);
2314 /* switch to JATT, in case it is not already */
2315 HFC_outb(hc, R_SYNC_OUT, 0);
2316 }
2317 hc->e1_resync = 0;
2318 spin_unlock_irqrestore(&HFClock, flags);
2319 }
2320
2321 if (hc->type != 1 || hc->e1_state == 1)
2322 for (ch = 0; ch <= 31; ch++) {
2323 if (hc->created[hc->chan[ch].port]) {
2324 hfcmulti_tx(hc, ch);
2325 /* fifo is started when switching to rx-fifo */
2326 hfcmulti_rx(hc, ch);
2327 if (hc->chan[ch].dch &&
2328 hc->chan[ch].nt_timer > -1) {
2329 dch = hc->chan[ch].dch;
2330 if (!(--hc->chan[ch].nt_timer)) {
2331 schedule_event(dch,
2332 FLG_PHCHANGE);
2333 if (debug &
2334 DEBUG_HFCMULTI_STATE)
2335 printk(KERN_DEBUG
2336 "%s: nt_timer at "
2337 "state %x\n",
2338 __func__,
2339 dch->state);
2340 }
2341 }
2342 }
2343 }
2344 if (hc->type == 1 && hc->created[0]) {
2345 dch = hc->chan[hc->dslot].dch;
2346 if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
2347 /* LOS */
2348 temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_SIG_LOS;
2349 if (!temp && hc->chan[hc->dslot].los)
2350 signal_state_up(dch, L1_SIGNAL_LOS_ON,
2351 "LOS detected");
2352 if (temp && !hc->chan[hc->dslot].los)
2353 signal_state_up(dch, L1_SIGNAL_LOS_OFF,
2354 "LOS gone");
2355 hc->chan[hc->dslot].los = temp;
2356 }
2357 if (test_bit(HFC_CFG_REPORT_AIS, &hc->chan[hc->dslot].cfg)) {
2358 /* AIS */
2359 temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_AIS;
2360 if (!temp && hc->chan[hc->dslot].ais)
2361 signal_state_up(dch, L1_SIGNAL_AIS_ON,
2362 "AIS detected");
2363 if (temp && !hc->chan[hc->dslot].ais)
2364 signal_state_up(dch, L1_SIGNAL_AIS_OFF,
2365 "AIS gone");
2366 hc->chan[hc->dslot].ais = temp;
2367 }
2368 if (test_bit(HFC_CFG_REPORT_SLIP, &hc->chan[hc->dslot].cfg)) {
2369 /* SLIP */
2370 temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_RX;
2371 if (!temp && hc->chan[hc->dslot].slip_rx)
2372 signal_state_up(dch, L1_SIGNAL_SLIP_RX,
2373 " bit SLIP detected RX");
2374 hc->chan[hc->dslot].slip_rx = temp;
2375 temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_TX;
2376 if (!temp && hc->chan[hc->dslot].slip_tx)
2377 signal_state_up(dch, L1_SIGNAL_SLIP_TX,
2378 " bit SLIP detected TX");
2379 hc->chan[hc->dslot].slip_tx = temp;
2380 }
2381 if (test_bit(HFC_CFG_REPORT_RDI, &hc->chan[hc->dslot].cfg)) {
2382 /* RDI */
2383 temp = HFC_inb_nodebug(hc, R_RX_SL0_0) & V_A;
2384 if (!temp && hc->chan[hc->dslot].rdi)
2385 signal_state_up(dch, L1_SIGNAL_RDI_ON,
2386 "RDI detected");
2387 if (temp && !hc->chan[hc->dslot].rdi)
2388 signal_state_up(dch, L1_SIGNAL_RDI_OFF,
2389 "RDI gone");
2390 hc->chan[hc->dslot].rdi = temp;
2391 }
2392 temp = HFC_inb_nodebug(hc, R_JATT_DIR);
2393 switch (hc->chan[hc->dslot].sync) {
2394 case 0:
2395 if ((temp & 0x60) == 0x60) {
2396 if (debug & DEBUG_HFCMULTI_SYNC)
2397 printk(KERN_DEBUG
2398 "%s: (id=%d) E1 now "
2399 "in clock sync\n",
2400 __func__, hc->id);
2401 HFC_outb(hc, R_RX_OFF,
2402 hc->chan[hc->dslot].jitter | V_RX_INIT);
2403 HFC_outb(hc, R_TX_OFF,
2404 hc->chan[hc->dslot].jitter | V_RX_INIT);
2405 hc->chan[hc->dslot].sync = 1;
2406 goto check_framesync;
2407 }
2408 break;
2409 case 1:
2410 if ((temp & 0x60) != 0x60) {
2411 if (debug & DEBUG_HFCMULTI_SYNC)
2412 printk(KERN_DEBUG
2413 "%s: (id=%d) E1 "
2414 "lost clock sync\n",
2415 __func__, hc->id);
2416 hc->chan[hc->dslot].sync = 0;
2417 break;
2418 }
2419check_framesync:
2420 temp = HFC_inb_nodebug(hc, R_SYNC_STA);
2421 if (temp == 0x27) {
2422 if (debug & DEBUG_HFCMULTI_SYNC)
2423 printk(KERN_DEBUG
2424 "%s: (id=%d) E1 "
2425 "now in frame sync\n",
2426 __func__, hc->id);
2427 hc->chan[hc->dslot].sync = 2;
2428 }
2429 break;
2430 case 2:
2431 if ((temp & 0x60) != 0x60) {
2432 if (debug & DEBUG_HFCMULTI_SYNC)
2433 printk(KERN_DEBUG
2434 "%s: (id=%d) E1 lost "
2435 "clock & frame sync\n",
2436 __func__, hc->id);
2437 hc->chan[hc->dslot].sync = 0;
2438 break;
2439 }
2440 temp = HFC_inb_nodebug(hc, R_SYNC_STA);
2441 if (temp != 0x27) {
2442 if (debug & DEBUG_HFCMULTI_SYNC)
2443 printk(KERN_DEBUG
2444 "%s: (id=%d) E1 "
2445 "lost frame sync\n",
2446 __func__, hc->id);
2447 hc->chan[hc->dslot].sync = 1;
2448 }
2449 break;
2450 }
2451 }
2452
2453 if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip))
2454 hfcmulti_watchdog(hc);
2455
2456 if (hc->leds)
2457 hfcmulti_leds(hc);
2458}
2459
2460static void
2461ph_state_irq(struct hfc_multi *hc, u_char r_irq_statech)
2462{
2463 struct dchannel *dch;
2464 int ch;
2465 int active;
2466 u_char st_status, temp;
2467
2468 /* state machine */
2469 for (ch = 0; ch <= 31; ch++) {
2470 if (hc->chan[ch].dch) {
2471 dch = hc->chan[ch].dch;
2472 if (r_irq_statech & 1) {
2473 HFC_outb_nodebug(hc, R_ST_SEL,
2474 hc->chan[ch].port);
2475 /* undocumented: delay after R_ST_SEL */
2476 udelay(1);
2477 /* undocumented: status changes during read */
2478 st_status = HFC_inb_nodebug(hc, A_ST_RD_STATE);
2479 while (st_status != (temp =
2480 HFC_inb_nodebug(hc, A_ST_RD_STATE))) {
2481 if (debug & DEBUG_HFCMULTI_STATE)
2482 printk(KERN_DEBUG "%s: reread "
2483 "STATE because %d!=%d\n",
2484 __func__, temp,
2485 st_status);
2486 st_status = temp; /* repeat */
2487 }
2488
2489 /* Speech Design TE-sync indication */
2490 if (test_bit(HFC_CHIP_PLXSD, &hc->chip) &&
2491 dch->dev.D.protocol == ISDN_P_TE_S0) {
2492 if (st_status & V_FR_SYNC_ST)
2493 hc->syncronized |=
2494 (1 << hc->chan[ch].port);
2495 else
2496 hc->syncronized &=
2497 ~(1 << hc->chan[ch].port);
2498 }
2499 dch->state = st_status & 0x0f;
2500 if (dch->dev.D.protocol == ISDN_P_NT_S0)
2501 active = 3;
2502 else
2503 active = 7;
2504 if (dch->state == active) {
2505 HFC_outb_nodebug(hc, R_FIFO,
2506 (ch << 1) | 1);
2507 HFC_wait_nodebug(hc);
2508 HFC_outb_nodebug(hc,
2509 R_INC_RES_FIFO, V_RES_F);
2510 HFC_wait_nodebug(hc);
2511 dch->tx_idx = 0;
2512 }
2513 schedule_event(dch, FLG_PHCHANGE);
2514 if (debug & DEBUG_HFCMULTI_STATE)
2515 printk(KERN_DEBUG
2516 "%s: S/T newstate %x port %d\n",
2517 __func__, dch->state,
2518 hc->chan[ch].port);
2519 }
2520 r_irq_statech >>= 1;
2521 }
2522 }
2523 if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
2524 plxsd_checksync(hc, 0);
2525}
2526
2527static void
2528fifo_irq(struct hfc_multi *hc, int block)
2529{
2530 int ch, j;
2531 struct dchannel *dch;
2532 struct bchannel *bch;
2533 u_char r_irq_fifo_bl;
2534
2535 r_irq_fifo_bl = HFC_inb_nodebug(hc, R_IRQ_FIFO_BL0 + block);
2536 j = 0;
2537 while (j < 8) {
2538 ch = (block << 2) + (j >> 1);
2539 dch = hc->chan[ch].dch;
2540 bch = hc->chan[ch].bch;
2541 if (((!dch) && (!bch)) || (!hc->created[hc->chan[ch].port])) {
2542 j += 2;
2543 continue;
2544 }
2545 if (dch && (r_irq_fifo_bl & (1 << j)) &&
2546 test_bit(FLG_ACTIVE, &dch->Flags)) {
2547 hfcmulti_tx(hc, ch);
2548 /* start fifo */
2549 HFC_outb_nodebug(hc, R_FIFO, 0);
2550 HFC_wait_nodebug(hc);
2551 }
2552 if (bch && (r_irq_fifo_bl & (1 << j)) &&
2553 test_bit(FLG_ACTIVE, &bch->Flags)) {
2554 hfcmulti_tx(hc, ch);
2555 /* start fifo */
2556 HFC_outb_nodebug(hc, R_FIFO, 0);
2557 HFC_wait_nodebug(hc);
2558 }
2559 j++;
2560 if (dch && (r_irq_fifo_bl & (1 << j)) &&
2561 test_bit(FLG_ACTIVE, &dch->Flags)) {
2562 hfcmulti_rx(hc, ch);
2563 }
2564 if (bch && (r_irq_fifo_bl & (1 << j)) &&
2565 test_bit(FLG_ACTIVE, &bch->Flags)) {
2566 hfcmulti_rx(hc, ch);
2567 }
2568 j++;
2569 }
2570}
2571
2572#ifdef IRQ_DEBUG
2573int irqsem;
2574#endif
2575static irqreturn_t
2576hfcmulti_interrupt(int intno, void *dev_id)
2577{
2578#ifdef IRQCOUNT_DEBUG
2579 static int iq1 = 0, iq2 = 0, iq3 = 0, iq4 = 0,
2580 iq5 = 0, iq6 = 0, iqcnt = 0;
2581#endif
2582 static int count;
2583 struct hfc_multi *hc = dev_id;
2584 struct dchannel *dch;
2585 u_char r_irq_statech, status, r_irq_misc, r_irq_oview;
2586 int i;
2587 u_short *plx_acc, wval;
2588 u_char e1_syncsta, temp;
2589 u_long flags;
2590
2591 if (!hc) {
2592 printk(KERN_ERR "HFC-multi: Spurious interrupt!\n");
2593 return IRQ_NONE;
2594 }
2595
2596 spin_lock(&hc->lock);
2597
2598#ifdef IRQ_DEBUG
2599 if (irqsem)
2600 printk(KERN_ERR "irq for card %d during irq from "
2601 "card %d, this is no bug.\n", hc->id + 1, irqsem);
2602 irqsem = hc->id + 1;
2603#endif
2604
2605 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
2606 spin_lock_irqsave(&plx_lock, flags);
2607 plx_acc = (u_short *)(hc->plx_membase + PLX_INTCSR);
2608 wval = readw(plx_acc);
2609 spin_unlock_irqrestore(&plx_lock, flags);
2610 if (!(wval & PLX_INTCSR_LINTI1_STATUS))
2611 goto irq_notforus;
2612 }
2613
2614 status = HFC_inb_nodebug(hc, R_STATUS);
2615 r_irq_statech = HFC_inb_nodebug(hc, R_IRQ_STATECH);
2616#ifdef IRQCOUNT_DEBUG
2617 if (r_irq_statech)
2618 iq1++;
2619 if (status & V_DTMF_STA)
2620 iq2++;
2621 if (status & V_LOST_STA)
2622 iq3++;
2623 if (status & V_EXT_IRQSTA)
2624 iq4++;
2625 if (status & V_MISC_IRQSTA)
2626 iq5++;
2627 if (status & V_FR_IRQSTA)
2628 iq6++;
2629 if (iqcnt++ > 5000) {
2630 printk(KERN_ERR "iq1:%x iq2:%x iq3:%x iq4:%x iq5:%x iq6:%x\n",
2631 iq1, iq2, iq3, iq4, iq5, iq6);
2632 iqcnt = 0;
2633 }
2634#endif
2635 if (!r_irq_statech &&
2636 !(status & (V_DTMF_STA | V_LOST_STA | V_EXT_IRQSTA |
2637 V_MISC_IRQSTA | V_FR_IRQSTA))) {
2638 /* irq is not for us */
2639 goto irq_notforus;
2640 }
2641 hc->irqcnt++;
2642 if (r_irq_statech) {
2643 if (hc->type != 1)
2644 ph_state_irq(hc, r_irq_statech);
2645 }
2646 if (status & V_EXT_IRQSTA)
2647 ; /* external IRQ */
2648 if (status & V_LOST_STA) {
2649 /* LOST IRQ */
2650 HFC_outb(hc, R_INC_RES_FIFO, V_RES_LOST); /* clear irq! */
2651 }
2652 if (status & V_MISC_IRQSTA) {
2653 /* misc IRQ */
2654 r_irq_misc = HFC_inb_nodebug(hc, R_IRQ_MISC);
2655 if (r_irq_misc & V_STA_IRQ) {
2656 if (hc->type == 1) {
2657 /* state machine */
2658 dch = hc->chan[hc->dslot].dch;
2659 e1_syncsta = HFC_inb_nodebug(hc, R_SYNC_STA);
2660 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)
2661 && hc->e1_getclock) {
2662 if (e1_syncsta & V_FR_SYNC_E1)
2663 hc->syncronized = 1;
2664 else
2665 hc->syncronized = 0;
2666 }
2667 /* undocumented: status changes during read */
2668 dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA);
2669 while (dch->state != (temp =
2670 HFC_inb_nodebug(hc, R_E1_RD_STA))) {
2671 if (debug & DEBUG_HFCMULTI_STATE)
2672 printk(KERN_DEBUG "%s: reread "
2673 "STATE because %d!=%d\n",
2674 __func__, temp,
2675 dch->state);
2676 dch->state = temp; /* repeat */
2677 }
2678 dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA)
2679 & 0x7;
2680 schedule_event(dch, FLG_PHCHANGE);
2681 if (debug & DEBUG_HFCMULTI_STATE)
2682 printk(KERN_DEBUG
2683 "%s: E1 (id=%d) newstate %x\n",
2684 __func__, hc->id, dch->state);
2685 if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
2686 plxsd_checksync(hc, 0);
2687 }
2688 }
2689 if (r_irq_misc & V_TI_IRQ)
2690 handle_timer_irq(hc);
2691
2692 if (r_irq_misc & V_DTMF_IRQ) {
2693 /* -> DTMF IRQ */
2694 hfcmulti_dtmf(hc);
2695 }
2696 /* TODO: REPLACE !!!! 125 us Interrupts are not acceptable */
2697 if (r_irq_misc & V_IRQ_PROC) {
2698 /* IRQ every 125us */
2699 count++;
2700 /* generate 1kHz signal */
2701 if (count == 8) {
2702 if (hfc_interrupt)
2703 hfc_interrupt();
2704 count = 0;
2705 }
2706 }
2707
2708 }
2709 if (status & V_FR_IRQSTA) {
2710 /* FIFO IRQ */
2711 r_irq_oview = HFC_inb_nodebug(hc, R_IRQ_OVIEW);
2712 for (i = 0; i < 8; i++) {
2713 if (r_irq_oview & (1 << i))
2714 fifo_irq(hc, i);
2715 }
2716 }
2717
2718#ifdef IRQ_DEBUG
2719 irqsem = 0;
2720#endif
2721 spin_unlock(&hc->lock);
2722 return IRQ_HANDLED;
2723
2724irq_notforus:
2725#ifdef IRQ_DEBUG
2726 irqsem = 0;
2727#endif
2728 spin_unlock(&hc->lock);
2729 return IRQ_NONE;
2730}
2731
2732
2733/*
2734 * timer callback for D-chan busy resolution. Currently no function
2735 */
2736
2737static void
2738hfcmulti_dbusy_timer(struct hfc_multi *hc)
2739{
2740}
2741
2742
2743/*
2744 * activate/deactivate hardware for selected channels and mode
2745 *
2746 * configure B-channel with the given protocol
2747 * ch eqals to the HFC-channel (0-31)
2748 * ch is the number of channel (0-4,4-7,8-11,12-15,16-19,20-23,24-27,28-31
2749 * for S/T, 1-31 for E1)
2750 * the hdlc interrupts will be set/unset
2751 */
2752static int
2753mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
2754 int bank_tx, int slot_rx, int bank_rx)
2755{
2756 int flow_tx = 0, flow_rx = 0, routing = 0;
2757 int oslot_tx, oslot_rx;
2758 int conf;
2759
2760 if (ch < 0 || ch > 31)
2761 return EINVAL;
2762 oslot_tx = hc->chan[ch].slot_tx;
2763 oslot_rx = hc->chan[ch].slot_rx;
2764 conf = hc->chan[ch].conf;
2765
2766 if (debug & DEBUG_HFCMULTI_MODE)
2767 printk(KERN_DEBUG
2768 "%s: card %d channel %d protocol %x slot old=%d new=%d "
2769 "bank new=%d (TX) slot old=%d new=%d bank new=%d (RX)\n",
2770 __func__, hc->id, ch, protocol, oslot_tx, slot_tx,
2771 bank_tx, oslot_rx, slot_rx, bank_rx);
2772
2773 if (oslot_tx >= 0 && slot_tx != oslot_tx) {
2774 /* remove from slot */
2775 if (debug & DEBUG_HFCMULTI_MODE)
2776 printk(KERN_DEBUG "%s: remove from slot %d (TX)\n",
2777 __func__, oslot_tx);
2778 if (hc->slot_owner[oslot_tx<<1] == ch) {
2779 HFC_outb(hc, R_SLOT, oslot_tx << 1);
2780 HFC_outb(hc, A_SL_CFG, 0);
2781 HFC_outb(hc, A_CONF, 0);
2782 hc->slot_owner[oslot_tx<<1] = -1;
2783 } else {
2784 if (debug & DEBUG_HFCMULTI_MODE)
2785 printk(KERN_DEBUG
2786 "%s: we are not owner of this tx slot "
2787 "anymore, channel %d is.\n",
2788 __func__, hc->slot_owner[oslot_tx<<1]);
2789 }
2790 }
2791
2792 if (oslot_rx >= 0 && slot_rx != oslot_rx) {
2793 /* remove from slot */
2794 if (debug & DEBUG_HFCMULTI_MODE)
2795 printk(KERN_DEBUG
2796 "%s: remove from slot %d (RX)\n",
2797 __func__, oslot_rx);
2798 if (hc->slot_owner[(oslot_rx << 1) | 1] == ch) {
2799 HFC_outb(hc, R_SLOT, (oslot_rx << 1) | V_SL_DIR);
2800 HFC_outb(hc, A_SL_CFG, 0);
2801 hc->slot_owner[(oslot_rx << 1) | 1] = -1;
2802 } else {
2803 if (debug & DEBUG_HFCMULTI_MODE)
2804 printk(KERN_DEBUG
2805 "%s: we are not owner of this rx slot "
2806 "anymore, channel %d is.\n",
2807 __func__,
2808 hc->slot_owner[(oslot_rx << 1) | 1]);
2809 }
2810 }
2811
2812 if (slot_tx < 0) {
2813 flow_tx = 0x80; /* FIFO->ST */
2814 /* disable pcm slot */
2815 hc->chan[ch].slot_tx = -1;
2816 hc->chan[ch].bank_tx = 0;
2817 } else {
2818 /* set pcm slot */
2819 if (hc->chan[ch].txpending)
2820 flow_tx = 0x80; /* FIFO->ST */
2821 else
2822 flow_tx = 0xc0; /* PCM->ST */
2823 /* put on slot */
2824 routing = bank_tx ? 0xc0 : 0x80;
2825 if (conf >= 0 || bank_tx > 1)
2826 routing = 0x40; /* loop */
2827 if (debug & DEBUG_HFCMULTI_MODE)
2828 printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
2829 " %d flow %02x routing %02x conf %d (TX)\n",
2830 __func__, ch, slot_tx, bank_tx,
2831 flow_tx, routing, conf);
2832 HFC_outb(hc, R_SLOT, slot_tx << 1);
2833 HFC_outb(hc, A_SL_CFG, (ch<<1) | routing);
2834 HFC_outb(hc, A_CONF, (conf < 0) ? 0 : (conf | V_CONF_SL));
2835 hc->slot_owner[slot_tx << 1] = ch;
2836 hc->chan[ch].slot_tx = slot_tx;
2837 hc->chan[ch].bank_tx = bank_tx;
2838 }
2839 if (slot_rx < 0) {
2840 /* disable pcm slot */
2841 flow_rx = 0x80; /* ST->FIFO */
2842 hc->chan[ch].slot_rx = -1;
2843 hc->chan[ch].bank_rx = 0;
2844 } else {
2845 /* set pcm slot */
2846 if (hc->chan[ch].txpending)
2847 flow_rx = 0x80; /* ST->FIFO */
2848 else
2849 flow_rx = 0xc0; /* ST->(FIFO,PCM) */
2850 /* put on slot */
2851 routing = bank_rx?0x80:0xc0; /* reversed */
2852 if (conf >= 0 || bank_rx > 1)
2853 routing = 0x40; /* loop */
2854 if (debug & DEBUG_HFCMULTI_MODE)
2855 printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
2856 " %d flow %02x routing %02x conf %d (RX)\n",
2857 __func__, ch, slot_rx, bank_rx,
2858 flow_rx, routing, conf);
2859 HFC_outb(hc, R_SLOT, (slot_rx<<1) | V_SL_DIR);
2860 HFC_outb(hc, A_SL_CFG, (ch<<1) | V_CH_DIR | routing);
2861 hc->slot_owner[(slot_rx<<1)|1] = ch;
2862 hc->chan[ch].slot_rx = slot_rx;
2863 hc->chan[ch].bank_rx = bank_rx;
2864 }
2865
2866 switch (protocol) {
2867 case (ISDN_P_NONE):
2868 /* disable TX fifo */
2869 HFC_outb(hc, R_FIFO, ch << 1);
2870 HFC_wait(hc);
2871 HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 | V_IFF);
2872 HFC_outb(hc, A_SUBCH_CFG, 0);
2873 HFC_outb(hc, A_IRQ_MSK, 0);
2874 HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
2875 HFC_wait(hc);
2876 /* disable RX fifo */
2877 HFC_outb(hc, R_FIFO, (ch<<1)|1);
2878 HFC_wait(hc);
2879 HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00);
2880 HFC_outb(hc, A_SUBCH_CFG, 0);
2881 HFC_outb(hc, A_IRQ_MSK, 0);
2882 HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
2883 HFC_wait(hc);
2884 if (hc->chan[ch].bch && hc->type != 1) {
2885 hc->hw.a_st_ctrl0[hc->chan[ch].port] &=
2886 ((ch & 0x3) == 0)? ~V_B1_EN: ~V_B2_EN;
2887 HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
2888 /* undocumented: delay after R_ST_SEL */
2889 udelay(1);
2890 HFC_outb(hc, A_ST_CTRL0,
2891 hc->hw.a_st_ctrl0[hc->chan[ch].port]);
2892 }
2893 if (hc->chan[ch].bch) {
2894 test_and_clear_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
2895 test_and_clear_bit(FLG_TRANSPARENT,
2896 &hc->chan[ch].bch->Flags);
2897 }
2898 break;
2899 case (ISDN_P_B_RAW): /* B-channel */
2900
2901 if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
2902 (hc->chan[ch].slot_rx < 0) &&
2903 (hc->chan[ch].slot_tx < 0)) {
2904
2905 printk(KERN_DEBUG
2906 "Setting B-channel %d to echo cancelable "
2907 "state on PCM slot %d\n", ch,
2908 ((ch / 4) * 8) + ((ch % 4) * 4) + 1);
2909 printk(KERN_DEBUG
2910 "Enabling pass through for channel\n");
2911 vpm_out(hc, ch, ((ch / 4) * 8) +
2912 ((ch % 4) * 4) + 1, 0x01);
2913 /* rx path */
2914 /* S/T -> PCM */
2915 HFC_outb(hc, R_FIFO, (ch << 1));
2916 HFC_wait(hc);
2917 HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF);
2918 HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
2919 ((ch % 4) * 4) + 1) << 1);
2920 HFC_outb(hc, A_SL_CFG, 0x80 | (ch << 1));
2921
2922 /* PCM -> FIFO */
2923 HFC_outb(hc, R_FIFO, 0x20 | (ch << 1) | 1);
2924 HFC_wait(hc);
2925 HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
2926 HFC_outb(hc, A_SUBCH_CFG, 0);
2927 HFC_outb(hc, A_IRQ_MSK, 0);
2928 HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
2929 HFC_wait(hc);
2930 HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
2931 ((ch % 4) * 4) + 1) << 1) | 1);
2932 HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1) | 1);
2933
2934 /* tx path */
2935 /* PCM -> S/T */
2936 HFC_outb(hc, R_FIFO, (ch << 1) | 1);
2937 HFC_wait(hc);
2938 HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF);
2939 HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
2940 ((ch % 4) * 4)) << 1) | 1);
2941 HFC_outb(hc, A_SL_CFG, 0x80 | 0x40 | (ch << 1) | 1);
2942
2943 /* FIFO -> PCM */
2944 HFC_outb(hc, R_FIFO, 0x20 | (ch << 1));
2945 HFC_wait(hc);
2946 HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
2947 HFC_outb(hc, A_SUBCH_CFG, 0);
2948 HFC_outb(hc, A_IRQ_MSK, 0);
2949 HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
2950 HFC_wait(hc);
2951 /* tx silence */
2952 HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
2953 HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
2954 ((ch % 4) * 4)) << 1);
2955 HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1));
2956 } else {
2957 /* enable TX fifo */
2958 HFC_outb(hc, R_FIFO, ch << 1);
2959 HFC_wait(hc);
2960 HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 |
2961 V_HDLC_TRP | V_IFF);
2962 HFC_outb(hc, A_SUBCH_CFG, 0);
2963 HFC_outb(hc, A_IRQ_MSK, 0);
2964 HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
2965 HFC_wait(hc);
2966 /* tx silence */
2967 HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
2968 /* enable RX fifo */
2969 HFC_outb(hc, R_FIFO, (ch<<1)|1);
2970 HFC_wait(hc);
2971 HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 | V_HDLC_TRP);
2972 HFC_outb(hc, A_SUBCH_CFG, 0);
2973 HFC_outb(hc, A_IRQ_MSK, 0);
2974 HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
2975 HFC_wait(hc);
2976 }
2977 if (hc->type != 1) {
2978 hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
2979 ((ch & 0x3) == 0) ? V_B1_EN : V_B2_EN;
2980 HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
2981 /* undocumented: delay after R_ST_SEL */
2982 udelay(1);
2983 HFC_outb(hc, A_ST_CTRL0,
2984 hc->hw.a_st_ctrl0[hc->chan[ch].port]);
2985 }
2986 if (hc->chan[ch].bch)
2987 test_and_set_bit(FLG_TRANSPARENT,
2988 &hc->chan[ch].bch->Flags);
2989 break;
2990 case (ISDN_P_B_HDLC): /* B-channel */
2991 case (ISDN_P_TE_S0): /* D-channel */
2992 case (ISDN_P_NT_S0):
2993 case (ISDN_P_TE_E1):
2994 case (ISDN_P_NT_E1):
2995 /* enable TX fifo */
2996 HFC_outb(hc, R_FIFO, ch<<1);
2997 HFC_wait(hc);
2998 if (hc->type == 1 || hc->chan[ch].bch) {
2999 /* E1 or B-channel */
3000 HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04);
3001 HFC_outb(hc, A_SUBCH_CFG, 0);
3002 } else {
3003 /* D-Channel without HDLC fill flags */
3004 HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04 | V_IFF);
3005 HFC_outb(hc, A_SUBCH_CFG, 2);
3006 }
3007 HFC_outb(hc, A_IRQ_MSK, V_IRQ);
3008 HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
3009 HFC_wait(hc);
3010 /* enable RX fifo */
3011 HFC_outb(hc, R_FIFO, (ch<<1)|1);
3012 HFC_wait(hc);
3013 HFC_outb(hc, A_CON_HDLC, flow_rx | 0x04);
3014 if (hc->type == 1 || hc->chan[ch].bch)
3015 HFC_outb(hc, A_SUBCH_CFG, 0); /* full 8 bits */
3016 else
3017 HFC_outb(hc, A_SUBCH_CFG, 2); /* 2 bits dchannel */
3018 HFC_outb(hc, A_IRQ_MSK, V_IRQ);
3019 HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
3020 HFC_wait(hc);
3021 if (hc->chan[ch].bch) {
3022 test_and_set_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
3023 if (hc->type != 1) {
3024 hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
3025 ((ch&0x3) == 0) ? V_B1_EN : V_B2_EN;
3026 HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
3027 /* undocumented: delay after R_ST_SEL */
3028 udelay(1);
3029 HFC_outb(hc, A_ST_CTRL0,
3030 hc->hw.a_st_ctrl0[hc->chan[ch].port]);
3031 }
3032 }
3033 break;
3034 default:
3035 printk(KERN_DEBUG "%s: protocol not known %x\n",
3036 __func__, protocol);
3037 hc->chan[ch].protocol = ISDN_P_NONE;
3038 return -ENOPROTOOPT;
3039 }
3040 hc->chan[ch].protocol = protocol;
3041 return 0;
3042}
3043
3044
3045/*
3046 * connect/disconnect PCM
3047 */
3048
3049static void
3050hfcmulti_pcm(struct hfc_multi *hc, int ch, int slot_tx, int bank_tx,
3051 int slot_rx, int bank_rx)
3052{
3053 if (slot_rx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) {
3054 /* disable PCM */
3055 mode_hfcmulti(hc, ch, hc->chan[ch].protocol, -1, 0, -1, 0);
3056 return;
3057 }
3058
3059 /* enable pcm */
3060 mode_hfcmulti(hc, ch, hc->chan[ch].protocol, slot_tx, bank_tx,
3061 slot_rx, bank_rx);
3062}
3063
3064/*
3065 * set/disable conference
3066 */
3067
3068static void
3069hfcmulti_conf(struct hfc_multi *hc, int ch, int num)
3070{
3071 if (num >= 0 && num <= 7)
3072 hc->chan[ch].conf = num;
3073 else
3074 hc->chan[ch].conf = -1;
3075 mode_hfcmulti(hc, ch, hc->chan[ch].protocol, hc->chan[ch].slot_tx,
3076 hc->chan[ch].bank_tx, hc->chan[ch].slot_rx,
3077 hc->chan[ch].bank_rx);
3078}
3079
3080
3081/*
3082 * set/disable sample loop
3083 */
3084
3085/* NOTE: this function is experimental and therefore disabled */
3086
3087/*
3088 * Layer 1 callback function
3089 */
3090static int
3091hfcm_l1callback(struct dchannel *dch, u_int cmd)
3092{
3093 struct hfc_multi *hc = dch->hw;
3094 u_long flags;
3095
3096 switch (cmd) {
3097 case INFO3_P8:
3098 case INFO3_P10:
3099 break;
3100 case HW_RESET_REQ:
3101 /* start activation */
3102 spin_lock_irqsave(&hc->lock, flags);
3103 if (hc->type == 1) {
3104 if (debug & DEBUG_HFCMULTI_MSG)
3105 printk(KERN_DEBUG
3106 "%s: HW_RESET_REQ no BRI\n",
3107 __func__);
3108 } else {
3109 HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
3110 /* undocumented: delay after R_ST_SEL */
3111 udelay(1);
3112 HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 3); /* F3 */
3113 udelay(6); /* wait at least 5,21us */
3114 HFC_outb(hc, A_ST_WR_STATE, 3);
3115 HFC_outb(hc, A_ST_WR_STATE, 3 | (V_ST_ACT*3));
3116 /* activate */
3117 }
3118 spin_unlock_irqrestore(&hc->lock, flags);
3119 l1_event(dch->l1, HW_POWERUP_IND);
3120 break;
3121 case HW_DEACT_REQ:
3122 /* start deactivation */
3123 spin_lock_irqsave(&hc->lock, flags);
3124 if (hc->type == 1) {
3125 if (debug & DEBUG_HFCMULTI_MSG)
3126 printk(KERN_DEBUG
3127 "%s: HW_DEACT_REQ no BRI\n",
3128 __func__);
3129 } else {
3130 HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
3131 /* undocumented: delay after R_ST_SEL */
3132 udelay(1);
3133 HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT*2);
3134 /* deactivate */
3135 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
3136 hc->syncronized &=
3137 ~(1 << hc->chan[dch->slot].port);
3138 plxsd_checksync(hc, 0);
3139 }
3140 }
3141 skb_queue_purge(&dch->squeue);
3142 if (dch->tx_skb) {
3143 dev_kfree_skb(dch->tx_skb);
3144 dch->tx_skb = NULL;
3145 }
3146 dch->tx_idx = 0;
3147 if (dch->rx_skb) {
3148 dev_kfree_skb(dch->rx_skb);
3149 dch->rx_skb = NULL;
3150 }
3151 test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
3152 if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
3153 del_timer(&dch->timer);
3154 spin_unlock_irqrestore(&hc->lock, flags);
3155 break;
3156 case HW_POWERUP_REQ:
3157 spin_lock_irqsave(&hc->lock, flags);
3158 if (hc->type == 1) {
3159 if (debug & DEBUG_HFCMULTI_MSG)
3160 printk(KERN_DEBUG
3161 "%s: HW_POWERUP_REQ no BRI\n",
3162 __func__);
3163 } else {
3164 HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
3165 /* undocumented: delay after R_ST_SEL */
3166 udelay(1);
3167 HFC_outb(hc, A_ST_WR_STATE, 3 | 0x10); /* activate */
3168 udelay(6); /* wait at least 5,21us */
3169 HFC_outb(hc, A_ST_WR_STATE, 3); /* activate */
3170 }
3171 spin_unlock_irqrestore(&hc->lock, flags);
3172 break;
3173 case PH_ACTIVATE_IND:
3174 test_and_set_bit(FLG_ACTIVE, &dch->Flags);
3175 _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
3176 GFP_ATOMIC);
3177 break;
3178 case PH_DEACTIVATE_IND:
3179 test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
3180 _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
3181 GFP_ATOMIC);
3182 break;
3183 default:
3184 if (dch->debug & DEBUG_HW)
3185 printk(KERN_DEBUG "%s: unknown command %x\n",
3186 __func__, cmd);
3187 return -1;
3188 }
3189 return 0;
3190}
3191
3192/*
3193 * Layer2 -> Layer 1 Transfer
3194 */
3195
3196static int
3197handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
3198{
3199 struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D);
3200 struct dchannel *dch = container_of(dev, struct dchannel, dev);
3201 struct hfc_multi *hc = dch->hw;
3202 struct mISDNhead *hh = mISDN_HEAD_P(skb);
3203 int ret = -EINVAL;
3204 unsigned int id;
3205 u_long flags;
3206
3207 switch (hh->prim) {
3208 case PH_DATA_REQ:
3209 if (skb->len < 1)
3210 break;
3211 spin_lock_irqsave(&hc->lock, flags);
3212 ret = dchannel_senddata(dch, skb);
3213 if (ret > 0) { /* direct TX */
3214 id = hh->id; /* skb can be freed */
3215 hfcmulti_tx(hc, dch->slot);
3216 ret = 0;
3217 /* start fifo */
3218 HFC_outb(hc, R_FIFO, 0);
3219 HFC_wait(hc);
3220 spin_unlock_irqrestore(&hc->lock, flags);
3221 queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
3222 } else
3223 spin_unlock_irqrestore(&hc->lock, flags);
3224 return ret;
3225 case PH_ACTIVATE_REQ:
3226 if (dch->dev.D.protocol != ISDN_P_TE_S0) {
3227 spin_lock_irqsave(&hc->lock, flags);
3228 ret = 0;
3229 if (debug & DEBUG_HFCMULTI_MSG)
3230 printk(KERN_DEBUG
3231 "%s: PH_ACTIVATE port %d (0..%d)\n",
3232 __func__, hc->chan[dch->slot].port,
3233 hc->ports-1);
3234 /* start activation */
3235 if (hc->type == 1) {
3236 ph_state_change(dch);
3237 if (debug & DEBUG_HFCMULTI_STATE)
3238 printk(KERN_DEBUG
3239 "%s: E1 report state %x \n",
3240 __func__, dch->state);
3241 } else {
3242 HFC_outb(hc, R_ST_SEL,
3243 hc->chan[dch->slot].port);
3244 /* undocumented: delay after R_ST_SEL */
3245 udelay(1);
3246 HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 1);
3247 /* G1 */
3248 udelay(6); /* wait at least 5,21us */
3249 HFC_outb(hc, A_ST_WR_STATE, 1);
3250 HFC_outb(hc, A_ST_WR_STATE, 1 |
3251 (V_ST_ACT*3)); /* activate */
3252 dch->state = 1;
3253 }
3254 spin_unlock_irqrestore(&hc->lock, flags);
3255 } else
3256 ret = l1_event(dch->l1, hh->prim);
3257 break;
3258 case PH_DEACTIVATE_REQ:
3259 test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
3260 if (dch->dev.D.protocol != ISDN_P_TE_S0) {
3261 spin_lock_irqsave(&hc->lock, flags);
3262 if (debug & DEBUG_HFCMULTI_MSG)
3263 printk(KERN_DEBUG
3264 "%s: PH_DEACTIVATE port %d (0..%d)\n",
3265 __func__, hc->chan[dch->slot].port,
3266 hc->ports-1);
3267 /* start deactivation */
3268 if (hc->type == 1) {
3269 if (debug & DEBUG_HFCMULTI_MSG)
3270 printk(KERN_DEBUG
3271 "%s: PH_DEACTIVATE no BRI\n",
3272 __func__);
3273 } else {
3274 HFC_outb(hc, R_ST_SEL,
3275 hc->chan[dch->slot].port);
3276 /* undocumented: delay after R_ST_SEL */
3277 udelay(1);
3278 HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT * 2);
3279 /* deactivate */
3280 dch->state = 1;
3281 }
3282 skb_queue_purge(&dch->squeue);
3283 if (dch->tx_skb) {
3284 dev_kfree_skb(dch->tx_skb);
3285 dch->tx_skb = NULL;
3286 }
3287 dch->tx_idx = 0;
3288 if (dch->rx_skb) {
3289 dev_kfree_skb(dch->rx_skb);
3290 dch->rx_skb = NULL;
3291 }
3292 test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
3293 if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
3294 del_timer(&dch->timer);
3295#ifdef FIXME
3296 if (test_and_clear_bit(FLG_L1_BUSY, &dch->Flags))
3297 dchannel_sched_event(&hc->dch, D_CLEARBUSY);
3298#endif
3299 ret = 0;
3300 spin_unlock_irqrestore(&hc->lock, flags);
3301 } else
3302 ret = l1_event(dch->l1, hh->prim);
3303 break;
3304 }
3305 if (!ret)
3306 dev_kfree_skb(skb);
3307 return ret;
3308}
3309
3310static void
3311deactivate_bchannel(struct bchannel *bch)
3312{
3313 struct hfc_multi *hc = bch->hw;
3314 u_long flags;
3315
3316 spin_lock_irqsave(&hc->lock, flags);
3317 if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) {
3318 dev_kfree_skb(bch->next_skb);
3319 bch->next_skb = NULL;
3320 }
3321 if (bch->tx_skb) {
3322 dev_kfree_skb(bch->tx_skb);
3323 bch->tx_skb = NULL;
3324 }
3325 bch->tx_idx = 0;
3326 if (bch->rx_skb) {
3327 dev_kfree_skb(bch->rx_skb);
3328 bch->rx_skb = NULL;
3329 }
3330 hc->chan[bch->slot].coeff_count = 0;
3331 test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
3332 test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
3333 hc->chan[bch->slot].rx_off = 0;
3334 hc->chan[bch->slot].conf = -1;
3335 mode_hfcmulti(hc, bch->slot, ISDN_P_NONE, -1, 0, -1, 0);
3336 spin_unlock_irqrestore(&hc->lock, flags);
3337}
3338
3339static int
3340handle_bmsg(struct mISDNchannel *ch, struct sk_buff *skb)
3341{
3342 struct bchannel *bch = container_of(ch, struct bchannel, ch);
3343 struct hfc_multi *hc = bch->hw;
3344 int ret = -EINVAL;
3345 struct mISDNhead *hh = mISDN_HEAD_P(skb);
3346 unsigned int id;
3347 u_long flags;
3348
3349 switch (hh->prim) {
3350 case PH_DATA_REQ:
3351 if (!skb->len)
3352 break;
3353 spin_lock_irqsave(&hc->lock, flags);
3354 ret = bchannel_senddata(bch, skb);
3355 if (ret > 0) { /* direct TX */
3356 id = hh->id; /* skb can be freed */
3357 hfcmulti_tx(hc, bch->slot);
3358 ret = 0;
3359 /* start fifo */
3360 HFC_outb_nodebug(hc, R_FIFO, 0);
3361 HFC_wait_nodebug(hc);
3362 if (!test_bit(FLG_TRANSPARENT, &bch->Flags)) {
3363 spin_unlock_irqrestore(&hc->lock, flags);
3364 queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
3365 } else
3366 spin_unlock_irqrestore(&hc->lock, flags);
3367 } else
3368 spin_unlock_irqrestore(&hc->lock, flags);
3369 return ret;
3370 case PH_ACTIVATE_REQ:
3371 if (debug & DEBUG_HFCMULTI_MSG)
3372 printk(KERN_DEBUG "%s: PH_ACTIVATE ch %d (0..32)\n",
3373 __func__, bch->slot);
3374 spin_lock_irqsave(&hc->lock, flags);
3375 /* activate B-channel if not already activated */
3376 if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags)) {
3377 hc->chan[bch->slot].txpending = 0;
3378 ret = mode_hfcmulti(hc, bch->slot,
3379 ch->protocol,
3380 hc->chan[bch->slot].slot_tx,
3381 hc->chan[bch->slot].bank_tx,
3382 hc->chan[bch->slot].slot_rx,
3383 hc->chan[bch->slot].bank_rx);
3384 if (!ret) {
3385 if (ch->protocol == ISDN_P_B_RAW && !hc->dtmf
3386 && test_bit(HFC_CHIP_DTMF, &hc->chip)) {
3387 /* start decoder */
3388 hc->dtmf = 1;
3389 if (debug & DEBUG_HFCMULTI_DTMF)
3390 printk(KERN_DEBUG
3391 "%s: start dtmf decoder\n",
3392 __func__);
3393 HFC_outb(hc, R_DTMF, hc->hw.r_dtmf |
3394 V_RST_DTMF);
3395 }
3396 }
3397 } else
3398 ret = 0;
3399 spin_unlock_irqrestore(&hc->lock, flags);
3400 if (!ret)
3401 _queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0, NULL,
3402 GFP_KERNEL);
3403 break;
3404 case PH_CONTROL_REQ:
3405 spin_lock_irqsave(&hc->lock, flags);
3406 switch (hh->id) {
3407 case HFC_SPL_LOOP_ON: /* set sample loop */
3408 if (debug & DEBUG_HFCMULTI_MSG)
3409 printk(KERN_DEBUG
3410 "%s: HFC_SPL_LOOP_ON (len = %d)\n",
3411 __func__, skb->len);
3412 ret = 0;
3413 break;
3414 case HFC_SPL_LOOP_OFF: /* set silence */
3415 if (debug & DEBUG_HFCMULTI_MSG)
3416 printk(KERN_DEBUG "%s: HFC_SPL_LOOP_OFF\n",
3417 __func__);
3418 ret = 0;
3419 break;
3420 default:
3421 printk(KERN_ERR
3422 "%s: unknown PH_CONTROL_REQ info %x\n",
3423 __func__, hh->id);
3424 ret = -EINVAL;
3425 }
3426 spin_unlock_irqrestore(&hc->lock, flags);
3427 break;
3428 case PH_DEACTIVATE_REQ:
3429 deactivate_bchannel(bch); /* locked there */
3430 _queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0, NULL,
3431 GFP_KERNEL);
3432 ret = 0;
3433 break;
3434 }
3435 if (!ret)
3436 dev_kfree_skb(skb);
3437 return ret;
3438}
3439
3440/*
3441 * bchannel control function
3442 */
3443static int
3444channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
3445{
3446 int ret = 0;
3447 struct dsp_features *features =
3448 (struct dsp_features *)(*((u_long *)&cq->p1));
3449 struct hfc_multi *hc = bch->hw;
3450 int slot_tx;
3451 int bank_tx;
3452 int slot_rx;
3453 int bank_rx;
3454 int num;
3455
3456 switch (cq->op) {
3457 case MISDN_CTRL_GETOP:
3458 cq->op = MISDN_CTRL_HFC_OP | MISDN_CTRL_HW_FEATURES_OP
3459 | MISDN_CTRL_RX_OFF;
3460 break;
3461 case MISDN_CTRL_RX_OFF: /* turn off / on rx stream */
3462 hc->chan[bch->slot].rx_off = !!cq->p1;
3463 if (!hc->chan[bch->slot].rx_off) {
3464 /* reset fifo on rx on */
3465 HFC_outb_nodebug(hc, R_FIFO, (bch->slot << 1) | 1);
3466 HFC_wait_nodebug(hc);
3467 HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
3468 HFC_wait_nodebug(hc);
3469 }
3470 if (debug & DEBUG_HFCMULTI_MSG)
3471 printk(KERN_DEBUG "%s: RX_OFF request (nr=%d off=%d)\n",
3472 __func__, bch->nr, hc->chan[bch->slot].rx_off);
3473 break;
3474 case MISDN_CTRL_HW_FEATURES: /* fill features structure */
3475 if (debug & DEBUG_HFCMULTI_MSG)
3476 printk(KERN_DEBUG "%s: HW_FEATURE request\n",
3477 __func__);
3478 /* create confirm */
3479 features->hfc_id = hc->id;
3480 if (test_bit(HFC_CHIP_DTMF, &hc->chip))
3481 features->hfc_dtmf = 1;
3482 features->hfc_loops = 0;
3483 if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
3484 features->hfc_echocanhw = 1;
3485 } else {
3486 features->pcm_id = hc->pcm;
3487 features->pcm_slots = hc->slots;
3488 features->pcm_banks = 2;
3489 }
3490 break;
3491 case MISDN_CTRL_HFC_PCM_CONN: /* connect to pcm timeslot (0..N) */
3492 slot_tx = cq->p1 & 0xff;
3493 bank_tx = cq->p1 >> 8;
3494 slot_rx = cq->p2 & 0xff;
3495 bank_rx = cq->p2 >> 8;
3496 if (debug & DEBUG_HFCMULTI_MSG)
3497 printk(KERN_DEBUG
3498 "%s: HFC_PCM_CONN slot %d bank %d (TX) "
3499 "slot %d bank %d (RX)\n",
3500 __func__, slot_tx, bank_tx,
3501 slot_rx, bank_rx);
3502 if (slot_tx < hc->slots && bank_tx <= 2 &&
3503 slot_rx < hc->slots && bank_rx <= 2)
3504 hfcmulti_pcm(hc, bch->slot,
3505 slot_tx, bank_tx, slot_rx, bank_rx);
3506 else {
3507 printk(KERN_WARNING
3508 "%s: HFC_PCM_CONN slot %d bank %d (TX) "
3509 "slot %d bank %d (RX) out of range\n",
3510 __func__, slot_tx, bank_tx,
3511 slot_rx, bank_rx);
3512 ret = -EINVAL;
3513 }
3514 break;
3515 case MISDN_CTRL_HFC_PCM_DISC: /* release interface from pcm timeslot */
3516 if (debug & DEBUG_HFCMULTI_MSG)
3517 printk(KERN_DEBUG "%s: HFC_PCM_DISC\n",
3518 __func__);
3519 hfcmulti_pcm(hc, bch->slot, -1, 0, -1, 0);
3520 break;
3521 case MISDN_CTRL_HFC_CONF_JOIN: /* join conference (0..7) */
3522 num = cq->p1 & 0xff;
3523 if (debug & DEBUG_HFCMULTI_MSG)
3524 printk(KERN_DEBUG "%s: HFC_CONF_JOIN conf %d\n",
3525 __func__, num);
3526 if (num <= 7)
3527 hfcmulti_conf(hc, bch->slot, num);
3528 else {
3529 printk(KERN_WARNING
3530 "%s: HW_CONF_JOIN conf %d out of range\n",
3531 __func__, num);
3532 ret = -EINVAL;
3533 }
3534 break;
3535 case MISDN_CTRL_HFC_CONF_SPLIT: /* split conference */
3536 if (debug & DEBUG_HFCMULTI_MSG)
3537 printk(KERN_DEBUG "%s: HFC_CONF_SPLIT\n", __func__);
3538 hfcmulti_conf(hc, bch->slot, -1);
3539 break;
3540 case MISDN_CTRL_HFC_ECHOCAN_ON:
3541 if (debug & DEBUG_HFCMULTI_MSG)
3542 printk(KERN_DEBUG "%s: HFC_ECHOCAN_ON\n", __func__);
3543 if (test_bit(HFC_CHIP_B410P, &hc->chip))
3544 vpm_echocan_on(hc, bch->slot, cq->p1);
3545 else
3546 ret = -EINVAL;
3547 break;
3548
3549 case MISDN_CTRL_HFC_ECHOCAN_OFF:
3550 if (debug & DEBUG_HFCMULTI_MSG)
3551 printk(KERN_DEBUG "%s: HFC_ECHOCAN_OFF\n",
3552 __func__);
3553 if (test_bit(HFC_CHIP_B410P, &hc->chip))
3554 vpm_echocan_off(hc, bch->slot);
3555 else
3556 ret = -EINVAL;
3557 break;
3558 default:
3559 printk(KERN_WARNING "%s: unknown Op %x\n",
3560 __func__, cq->op);
3561 ret = -EINVAL;
3562 break;
3563 }
3564 return ret;
3565}
3566
3567static int
3568hfcm_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
3569{
3570 struct bchannel *bch = container_of(ch, struct bchannel, ch);
3571 struct hfc_multi *hc = bch->hw;
3572 int err = -EINVAL;
3573 u_long flags;
3574
3575 if (bch->debug & DEBUG_HW)
3576 printk(KERN_DEBUG "%s: cmd:%x %p\n",
3577 __func__, cmd, arg);
3578 switch (cmd) {
3579 case CLOSE_CHANNEL:
3580 test_and_clear_bit(FLG_OPEN, &bch->Flags);
3581 if (test_bit(FLG_ACTIVE, &bch->Flags))
3582 deactivate_bchannel(bch); /* locked there */
3583 ch->protocol = ISDN_P_NONE;
3584 ch->peer = NULL;
3585 module_put(THIS_MODULE);
3586 err = 0;
3587 break;
3588 case CONTROL_CHANNEL:
3589 spin_lock_irqsave(&hc->lock, flags);
3590 err = channel_bctrl(bch, arg);
3591 spin_unlock_irqrestore(&hc->lock, flags);
3592 break;
3593 default:
3594 printk(KERN_WARNING "%s: unknown prim(%x)\n",
3595 __func__, cmd);
3596 }
3597 return err;
3598}
3599
3600/*
3601 * handle D-channel events
3602 *
3603 * handle state change event
3604 */
3605static void
3606ph_state_change(struct dchannel *dch)
3607{
3608 struct hfc_multi *hc = dch->hw;
3609 int ch, i;
3610
3611 if (!dch) {
3612 printk(KERN_WARNING "%s: ERROR given dch is NULL\n",
3613 __func__);
3614 return;
3615 }
3616 ch = dch->slot;
3617
3618 if (hc->type == 1) {
3619 if (dch->dev.D.protocol == ISDN_P_TE_E1) {
3620 if (debug & DEBUG_HFCMULTI_STATE)
3621 printk(KERN_DEBUG
3622 "%s: E1 TE (id=%d) newstate %x\n",
3623 __func__, hc->id, dch->state);
3624 } else {
3625 if (debug & DEBUG_HFCMULTI_STATE)
3626 printk(KERN_DEBUG
3627 "%s: E1 NT (id=%d) newstate %x\n",
3628 __func__, hc->id, dch->state);
3629 }
3630 switch (dch->state) {
3631 case (1):
3632 if (hc->e1_state != 1) {
3633 for (i = 1; i <= 31; i++) {
3634 /* reset fifos on e1 activation */
3635 HFC_outb_nodebug(hc, R_FIFO, (i << 1) | 1);
3636 HFC_wait_nodebug(hc);
3637 HFC_outb_nodebug(hc,
3638 R_INC_RES_FIFO, V_RES_F);
3639 HFC_wait_nodebug(hc);
3640 }
3641 }
3642 test_and_set_bit(FLG_ACTIVE, &dch->Flags);
3643 _queue_data(&dch->dev.D, PH_ACTIVATE_IND,
3644 MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
3645 break;
3646
3647 default:
3648 if (hc->e1_state != 1)
3649 return;
3650 test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
3651 _queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
3652 MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
3653 }
3654 hc->e1_state = dch->state;
3655 } else {
3656 if (dch->dev.D.protocol == ISDN_P_TE_S0) {
3657 if (debug & DEBUG_HFCMULTI_STATE)
3658 printk(KERN_DEBUG
3659 "%s: S/T TE newstate %x\n",
3660 __func__, dch->state);
3661 switch (dch->state) {
3662 case (0):
3663 l1_event(dch->l1, HW_RESET_IND);
3664 break;
3665 case (3):
3666 l1_event(dch->l1, HW_DEACT_IND);
3667 break;
3668 case (5):
3669 case (8):
3670 l1_event(dch->l1, ANYSIGNAL);
3671 break;
3672 case (6):
3673 l1_event(dch->l1, INFO2);
3674 break;
3675 case (7):
3676 l1_event(dch->l1, INFO4_P8);
3677 break;
3678 }
3679 } else {
3680 if (debug & DEBUG_HFCMULTI_STATE)
3681 printk(KERN_DEBUG "%s: S/T NT newstate %x\n",
3682 __func__, dch->state);
3683 switch (dch->state) {
3684 case (2):
3685 if (hc->chan[ch].nt_timer == 0) {
3686 hc->chan[ch].nt_timer = -1;
3687 HFC_outb(hc, R_ST_SEL,
3688 hc->chan[ch].port);
3689 /* undocumented: delay after R_ST_SEL */
3690 udelay(1);
3691 HFC_outb(hc, A_ST_WR_STATE, 4 |
3692 V_ST_LD_STA); /* G4 */
3693 udelay(6); /* wait at least 5,21us */
3694 HFC_outb(hc, A_ST_WR_STATE, 4);
3695 dch->state = 4;
3696 } else {
3697 /* one extra count for the next event */
3698 hc->chan[ch].nt_timer =
3699 nt_t1_count[poll_timer] + 1;
3700 HFC_outb(hc, R_ST_SEL,
3701 hc->chan[ch].port);
3702 /* undocumented: delay after R_ST_SEL */
3703 udelay(1);
3704 /* allow G2 -> G3 transition */
3705 HFC_outb(hc, A_ST_WR_STATE, 2 |
3706 V_SET_G2_G3);
3707 }
3708 break;
3709 case (1):
3710 hc->chan[ch].nt_timer = -1;
3711 test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
3712 _queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
3713 MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
3714 break;
3715 case (4):
3716 hc->chan[ch].nt_timer = -1;
3717 break;
3718 case (3):
3719 hc->chan[ch].nt_timer = -1;
3720 test_and_set_bit(FLG_ACTIVE, &dch->Flags);
3721 _queue_data(&dch->dev.D, PH_ACTIVATE_IND,
3722 MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
3723 break;
3724 }
3725 }
3726 }
3727}
3728
3729/*
3730 * called for card mode init message
3731 */
3732
3733static void
3734hfcmulti_initmode(struct dchannel *dch)
3735{
3736 struct hfc_multi *hc = dch->hw;
3737 u_char a_st_wr_state, r_e1_wr_sta;
3738 int i, pt;
3739
3740 if (debug & DEBUG_HFCMULTI_INIT)
3741 printk(KERN_DEBUG "%s: entered\n", __func__);
3742
3743 if (hc->type == 1) {
3744 hc->chan[hc->dslot].slot_tx = -1;
3745 hc->chan[hc->dslot].slot_rx = -1;
3746 hc->chan[hc->dslot].conf = -1;
3747 if (hc->dslot) {
3748 mode_hfcmulti(hc, hc->dslot, dch->dev.D.protocol,
3749 -1, 0, -1, 0);
3750 dch->timer.function = (void *) hfcmulti_dbusy_timer;
3751 dch->timer.data = (long) dch;
3752 init_timer(&dch->timer);
3753 }
3754 for (i = 1; i <= 31; i++) {
3755 if (i == hc->dslot)
3756 continue;
3757 hc->chan[i].slot_tx = -1;
3758 hc->chan[i].slot_rx = -1;
3759 hc->chan[i].conf = -1;
3760 mode_hfcmulti(hc, i, ISDN_P_NONE, -1, 0, -1, 0);
3761 }
3762 /* E1 */
3763 if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
3764 HFC_outb(hc, R_LOS0, 255); /* 2 ms */
3765 HFC_outb(hc, R_LOS1, 255); /* 512 ms */
3766 }
3767 if (test_bit(HFC_CFG_OPTICAL, &hc->chan[hc->dslot].cfg)) {
3768 HFC_outb(hc, R_RX0, 0);
3769 hc->hw.r_tx0 = 0 | V_OUT_EN;
3770 } else {
3771 HFC_outb(hc, R_RX0, 1);
3772 hc->hw.r_tx0 = 1 | V_OUT_EN;
3773 }
3774 hc->hw.r_tx1 = V_ATX | V_NTRI;
3775 HFC_outb(hc, R_TX0, hc->hw.r_tx0);
3776 HFC_outb(hc, R_TX1, hc->hw.r_tx1);
3777 HFC_outb(hc, R_TX_FR0, 0x00);
3778 HFC_outb(hc, R_TX_FR1, 0xf8);
3779
3780 if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg))
3781 HFC_outb(hc, R_TX_FR2, V_TX_MF | V_TX_E | V_NEG_E);
3782
3783 HFC_outb(hc, R_RX_FR0, V_AUTO_RESYNC | V_AUTO_RECO | 0);
3784
3785 if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg))
3786 HFC_outb(hc, R_RX_FR1, V_RX_MF | V_RX_MF_SYNC);
3787
3788 if (dch->dev.D.protocol == ISDN_P_NT_E1) {
3789 if (debug & DEBUG_HFCMULTI_INIT)
3790 printk(KERN_DEBUG "%s: E1 port is NT-mode\n",
3791 __func__);
3792 r_e1_wr_sta = 0; /* G0 */
3793 hc->e1_getclock = 0;
3794 } else {
3795 if (debug & DEBUG_HFCMULTI_INIT)
3796 printk(KERN_DEBUG "%s: E1 port is TE-mode\n",
3797 __func__);
3798 r_e1_wr_sta = 0; /* F0 */
3799 hc->e1_getclock = 1;
3800 }
3801 if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip))
3802 HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX);
3803 else
3804 HFC_outb(hc, R_SYNC_OUT, 0);
3805 if (test_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip))
3806 hc->e1_getclock = 1;
3807 if (test_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip))
3808 hc->e1_getclock = 0;
3809 if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
3810 /* SLAVE (clock master) */
3811 if (debug & DEBUG_HFCMULTI_INIT)
3812 printk(KERN_DEBUG
3813 "%s: E1 port is clock master "
3814 "(clock from PCM)\n", __func__);
3815 HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC | V_PCM_SYNC);
3816 } else {
3817 if (hc->e1_getclock) {
3818 /* MASTER (clock slave) */
3819 if (debug & DEBUG_HFCMULTI_INIT)
3820 printk(KERN_DEBUG
3821 "%s: E1 port is clock slave "
3822 "(clock to PCM)\n", __func__);
3823 HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS);
3824 } else {
3825 /* MASTER (clock master) */
3826 if (debug & DEBUG_HFCMULTI_INIT)
3827 printk(KERN_DEBUG "%s: E1 port is "
3828 "clock master "
3829 "(clock from QUARTZ)\n",
3830 __func__);
3831 HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC |
3832 V_PCM_SYNC | V_JATT_OFF);
3833 HFC_outb(hc, R_SYNC_OUT, 0);
3834 }
3835 }
3836 HFC_outb(hc, R_JATT_ATT, 0x9c); /* undoc register */
3837 HFC_outb(hc, R_PWM_MD, V_PWM0_MD);
3838 HFC_outb(hc, R_PWM0, 0x50);
3839 HFC_outb(hc, R_PWM1, 0xff);
3840 /* state machine setup */
3841 HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta | V_E1_LD_STA);
3842 udelay(6); /* wait at least 5,21us */
3843 HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta);
3844 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
3845 hc->syncronized = 0;
3846 plxsd_checksync(hc, 0);
3847 }
3848 } else {
3849 i = dch->slot;
3850 hc->chan[i].slot_tx = -1;
3851 hc->chan[i].slot_rx = -1;
3852 hc->chan[i].conf = -1;
3853 mode_hfcmulti(hc, i, dch->dev.D.protocol, -1, 0, -1, 0);
3854 dch->timer.function = (void *)hfcmulti_dbusy_timer;
3855 dch->timer.data = (long) dch;
3856 init_timer(&dch->timer);
3857 hc->chan[i - 2].slot_tx = -1;
3858 hc->chan[i - 2].slot_rx = -1;
3859 hc->chan[i - 2].conf = -1;
3860 mode_hfcmulti(hc, i - 2, ISDN_P_NONE, -1, 0, -1, 0);
3861 hc->chan[i - 1].slot_tx = -1;
3862 hc->chan[i - 1].slot_rx = -1;
3863 hc->chan[i - 1].conf = -1;
3864 mode_hfcmulti(hc, i - 1, ISDN_P_NONE, -1, 0, -1, 0);
3865 /* ST */
3866 pt = hc->chan[i].port;
3867 /* select interface */
3868 HFC_outb(hc, R_ST_SEL, pt);
3869 /* undocumented: delay after R_ST_SEL */
3870 udelay(1);
3871 if (dch->dev.D.protocol == ISDN_P_NT_S0) {
3872 if (debug & DEBUG_HFCMULTI_INIT)
3873 printk(KERN_DEBUG
3874 "%s: ST port %d is NT-mode\n",
3875 __func__, pt);
3876 /* clock delay */
3877 HFC_outb(hc, A_ST_CLK_DLY, clockdelay_nt);
3878 a_st_wr_state = 1; /* G1 */
3879 hc->hw.a_st_ctrl0[pt] = V_ST_MD;
3880 } else {
3881 if (debug & DEBUG_HFCMULTI_INIT)
3882 printk(KERN_DEBUG
3883 "%s: ST port %d is TE-mode\n",
3884 __func__, pt);
3885 /* clock delay */
3886 HFC_outb(hc, A_ST_CLK_DLY, clockdelay_te);
3887 a_st_wr_state = 2; /* F2 */
3888 hc->hw.a_st_ctrl0[pt] = 0;
3889 }
3890 if (!test_bit(HFC_CFG_NONCAP_TX, &hc->chan[i].cfg))
3891 hc->hw.a_st_ctrl0[pt] |= V_TX_LI;
3892 /* line setup */
3893 HFC_outb(hc, A_ST_CTRL0, hc->hw.a_st_ctrl0[pt]);
3894 /* disable E-channel */
3895 if ((dch->dev.D.protocol == ISDN_P_NT_S0) ||
3896 test_bit(HFC_CFG_DIS_ECHANNEL, &hc->chan[i].cfg))
3897 HFC_outb(hc, A_ST_CTRL1, V_E_IGNO);
3898 else
3899 HFC_outb(hc, A_ST_CTRL1, 0);
3900 /* enable B-channel receive */
3901 HFC_outb(hc, A_ST_CTRL2, V_B1_RX_EN | V_B2_RX_EN);
3902 /* state machine setup */
3903 HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state | V_ST_LD_STA);
3904 udelay(6); /* wait at least 5,21us */
3905 HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state);
3906 hc->hw.r_sci_msk |= 1 << pt;
3907 /* state machine interrupts */
3908 HFC_outb(hc, R_SCI_MSK, hc->hw.r_sci_msk);
3909 /* unset sync on port */
3910 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
3911 hc->syncronized &=
3912 ~(1 << hc->chan[dch->slot].port);
3913 plxsd_checksync(hc, 0);
3914 }
3915 }
3916 if (debug & DEBUG_HFCMULTI_INIT)
3917 printk("%s: done\n", __func__);
3918}
3919
3920
3921static int
3922open_dchannel(struct hfc_multi *hc, struct dchannel *dch,
3923 struct channel_req *rq)
3924{
3925 int err = 0;
3926 u_long flags;
3927
3928 if (debug & DEBUG_HW_OPEN)
3929 printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__,
3930 dch->dev.id, __builtin_return_address(0));
3931 if (rq->protocol == ISDN_P_NONE)
3932 return -EINVAL;
3933 if ((dch->dev.D.protocol != ISDN_P_NONE) &&
3934 (dch->dev.D.protocol != rq->protocol)) {
3935 if (debug & DEBUG_HFCMULTI_MODE)
3936 printk(KERN_WARNING "%s: change protocol %x to %x\n",
3937 __func__, dch->dev.D.protocol, rq->protocol);
3938 }
3939 if ((dch->dev.D.protocol == ISDN_P_TE_S0)
3940 && (rq->protocol != ISDN_P_TE_S0))
3941 l1_event(dch->l1, CLOSE_CHANNEL);
3942 if (dch->dev.D.protocol != rq->protocol) {
3943 if (rq->protocol == ISDN_P_TE_S0) {
3944 err = create_l1(dch, hfcm_l1callback);
3945 if (err)
3946 return err;
3947 }
3948 dch->dev.D.protocol = rq->protocol;
3949 spin_lock_irqsave(&hc->lock, flags);
3950 hfcmulti_initmode(dch);
3951 spin_unlock_irqrestore(&hc->lock, flags);
3952 }
3953
3954 if (((rq->protocol == ISDN_P_NT_S0) && (dch->state == 3)) ||
3955 ((rq->protocol == ISDN_P_TE_S0) && (dch->state == 7)) ||
3956 ((rq->protocol == ISDN_P_NT_E1) && (dch->state == 1)) ||
3957 ((rq->protocol == ISDN_P_TE_E1) && (dch->state == 1))) {
3958 _queue_data(&dch->dev.D, PH_ACTIVATE_IND, MISDN_ID_ANY,
3959 0, NULL, GFP_KERNEL);
3960 }
3961 rq->ch = &dch->dev.D;
3962 if (!try_module_get(THIS_MODULE))
3963 printk(KERN_WARNING "%s:cannot get module\n", __func__);
3964 return 0;
3965}
3966
3967static int
3968open_bchannel(struct hfc_multi *hc, struct dchannel *dch,
3969 struct channel_req *rq)
3970{
3971 struct bchannel *bch;
3972 int ch;
3973
3974 if (!test_bit(rq->adr.channel, &dch->dev.channelmap[0]))
3975 return -EINVAL;
3976 if (rq->protocol == ISDN_P_NONE)
3977 return -EINVAL;
3978 if (hc->type == 1)
3979 ch = rq->adr.channel;
3980 else
3981 ch = (rq->adr.channel - 1) + (dch->slot - 2);
3982 bch = hc->chan[ch].bch;
3983 if (!bch) {
3984 printk(KERN_ERR "%s:internal error ch %d has no bch\n",
3985 __func__, ch);
3986 return -EINVAL;
3987 }
3988 if (test_and_set_bit(FLG_OPEN, &bch->Flags))
3989 return -EBUSY; /* b-channel can be only open once */
3990 bch->ch.protocol = rq->protocol;
3991 hc->chan[ch].rx_off = 0;
3992 rq->ch = &bch->ch;
3993 if (!try_module_get(THIS_MODULE))
3994 printk(KERN_WARNING "%s:cannot get module\n", __func__);
3995 return 0;
3996}
3997
3998/*
3999 * device control function
4000 */
4001static int
4002channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq)
4003{
4004 int ret = 0;
4005
4006 switch (cq->op) {
4007 case MISDN_CTRL_GETOP:
4008 cq->op = 0;
4009 break;
4010 default:
4011 printk(KERN_WARNING "%s: unknown Op %x\n",
4012 __func__, cq->op);
4013 ret = -EINVAL;
4014 break;
4015 }
4016 return ret;
4017}
4018
4019static int
4020hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
4021{
4022 struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D);
4023 struct dchannel *dch = container_of(dev, struct dchannel, dev);
4024 struct hfc_multi *hc = dch->hw;
4025 struct channel_req *rq;
4026 int err = 0;
4027 u_long flags;
4028
4029 if (dch->debug & DEBUG_HW)
4030 printk(KERN_DEBUG "%s: cmd:%x %p\n",
4031 __func__, cmd, arg);
4032 switch (cmd) {
4033 case OPEN_CHANNEL:
4034 rq = arg;
4035 switch (rq->protocol) {
4036 case ISDN_P_TE_S0:
4037 case ISDN_P_NT_S0:
4038 if (hc->type == 1) {
4039 err = -EINVAL;
4040 break;
4041 }
4042 err = open_dchannel(hc, dch, rq); /* locked there */
4043 break;
4044 case ISDN_P_TE_E1:
4045 case ISDN_P_NT_E1:
4046 if (hc->type != 1) {
4047 err = -EINVAL;
4048 break;
4049 }
4050 err = open_dchannel(hc, dch, rq); /* locked there */
4051 break;
4052 default:
4053 spin_lock_irqsave(&hc->lock, flags);
4054 err = open_bchannel(hc, dch, rq);
4055 spin_unlock_irqrestore(&hc->lock, flags);
4056 }
4057 break;
4058 case CLOSE_CHANNEL:
4059 if (debug & DEBUG_HW_OPEN)
4060 printk(KERN_DEBUG "%s: dev(%d) close from %p\n",
4061 __func__, dch->dev.id,
4062 __builtin_return_address(0));
4063 module_put(THIS_MODULE);
4064 break;
4065 case CONTROL_CHANNEL:
4066 spin_lock_irqsave(&hc->lock, flags);
4067 err = channel_dctrl(dch, arg);
4068 spin_unlock_irqrestore(&hc->lock, flags);
4069 break;
4070 default:
4071 if (dch->debug & DEBUG_HW)
4072 printk(KERN_DEBUG "%s: unknown command %x\n",
4073 __func__, cmd);
4074 err = -EINVAL;
4075 }
4076 return err;
4077}
4078
4079/*
4080 * initialize the card
4081 */
4082
4083/*
4084 * start timer irq, wait some time and check if we have interrupts.
4085 * if not, reset chip and try again.
4086 */
4087static int
4088init_card(struct hfc_multi *hc)
4089{
4090 int err = -EIO;
4091 u_long flags;
4092 u_short *plx_acc;
4093 u_long plx_flags;
4094
4095 if (debug & DEBUG_HFCMULTI_INIT)
4096 printk(KERN_DEBUG "%s: entered\n", __func__);
4097
4098 spin_lock_irqsave(&hc->lock, flags);
4099 /* set interrupts but leave global interrupt disabled */
4100 hc->hw.r_irq_ctrl = V_FIFO_IRQ;
4101 disable_hwirq(hc);
4102 spin_unlock_irqrestore(&hc->lock, flags);
4103
4104 if (request_irq(hc->pci_dev->irq, hfcmulti_interrupt, IRQF_SHARED,
4105 "HFC-multi", hc)) {
4106 printk(KERN_WARNING "mISDN: Could not get interrupt %d.\n",
4107 hc->pci_dev->irq);
4108 return -EIO;
4109 }
4110 hc->irq = hc->pci_dev->irq;
4111
4112 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
4113 spin_lock_irqsave(&plx_lock, plx_flags);
4114 plx_acc = (u_short *)(hc->plx_membase+PLX_INTCSR);
4115 writew((PLX_INTCSR_PCIINT_ENABLE | PLX_INTCSR_LINTI1_ENABLE),
4116 plx_acc); /* enable PCI & LINT1 irq */
4117 spin_unlock_irqrestore(&plx_lock, plx_flags);
4118 }
4119
4120 if (debug & DEBUG_HFCMULTI_INIT)
4121 printk(KERN_DEBUG "%s: IRQ %d count %d\n",
4122 __func__, hc->irq, hc->irqcnt);
4123 err = init_chip(hc);
4124 if (err)
4125 goto error;
4126 /*
4127 * Finally enable IRQ output
4128 * this is only allowed, if an IRQ routine is allready
4129 * established for this HFC, so don't do that earlier
4130 */
4131 spin_lock_irqsave(&hc->lock, flags);
4132 enable_hwirq(hc);
4133 spin_unlock_irqrestore(&hc->lock, flags);
4134 /* printk(KERN_DEBUG "no master irq set!!!\n"); */
4135 set_current_state(TASK_UNINTERRUPTIBLE);
4136 schedule_timeout((100*HZ)/1000); /* Timeout 100ms */
4137 /* turn IRQ off until chip is completely initialized */
4138 spin_lock_irqsave(&hc->lock, flags);
4139 disable_hwirq(hc);
4140 spin_unlock_irqrestore(&hc->lock, flags);
4141 if (debug & DEBUG_HFCMULTI_INIT)
4142 printk(KERN_DEBUG "%s: IRQ %d count %d\n",
4143 __func__, hc->irq, hc->irqcnt);
4144 if (hc->irqcnt) {
4145 if (debug & DEBUG_HFCMULTI_INIT)
4146 printk(KERN_DEBUG "%s: done\n", __func__);
4147
4148 return 0;
4149 }
4150 if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
4151 printk(KERN_INFO "ignoring missing interrupts\n");
4152 return 0;
4153 }
4154
4155 printk(KERN_ERR "HFC PCI: IRQ(%d) getting no interrupts during init.\n",
4156 hc->irq);
4157
4158 err = -EIO;
4159
4160error:
4161 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
4162 spin_lock_irqsave(&plx_lock, plx_flags);
4163 plx_acc = (u_short *)(hc->plx_membase+PLX_INTCSR);
4164 writew(0x00, plx_acc); /*disable IRQs*/
4165 spin_unlock_irqrestore(&plx_lock, plx_flags);
4166 }
4167
4168 if (debug & DEBUG_HFCMULTI_INIT)
4169 printk(KERN_WARNING "%s: free irq %d\n", __func__, hc->irq);
4170 if (hc->irq) {
4171 free_irq(hc->irq, hc);
4172 hc->irq = 0;
4173 }
4174
4175 if (debug & DEBUG_HFCMULTI_INIT)
4176 printk(KERN_DEBUG "%s: done (err=%d)\n", __func__, err);
4177 return err;
4178}
4179
4180/*
4181 * find pci device and set it up
4182 */
4183
4184static int
4185setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
4186 const struct pci_device_id *ent)
4187{
4188 struct hm_map *m = (struct hm_map *)ent->driver_data;
4189
4190 printk(KERN_INFO
4191 "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n",
4192 m->vendor_name, m->card_name, m->clock2 ? "double" : "normal");
4193
4194 hc->pci_dev = pdev;
4195 if (m->clock2)
4196 test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);
4197
4198 if (ent->device == 0xB410) {
4199 test_and_set_bit(HFC_CHIP_B410P, &hc->chip);
4200 test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
4201 test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
4202 hc->slots = 32;
4203 }
4204
4205 if (hc->pci_dev->irq <= 0) {
4206 printk(KERN_WARNING "HFC-multi: No IRQ for PCI card found.\n");
4207 return -EIO;
4208 }
4209 if (pci_enable_device(hc->pci_dev)) {
4210 printk(KERN_WARNING "HFC-multi: Error enabling PCI card.\n");
4211 return -EIO;
4212 }
4213 hc->leds = m->leds;
4214 hc->ledstate = 0xAFFEAFFE;
4215 hc->opticalsupport = m->opticalsupport;
4216
4217 /* set memory access methods */
4218 if (m->io_mode) /* use mode from card config */
4219 hc->io_mode = m->io_mode;
4220 switch (hc->io_mode) {
4221 case HFC_IO_MODE_PLXSD:
4222 test_and_set_bit(HFC_CHIP_PLXSD, &hc->chip);
4223 hc->slots = 128; /* required */
4224 /* fall through */
4225 case HFC_IO_MODE_PCIMEM:
4226 hc->HFC_outb = HFC_outb_pcimem;
4227 hc->HFC_inb = HFC_inb_pcimem;
4228 hc->HFC_inw = HFC_inw_pcimem;
4229 hc->HFC_wait = HFC_wait_pcimem;
4230 hc->read_fifo = read_fifo_pcimem;
4231 hc->write_fifo = write_fifo_pcimem;
4232 break;
4233 case HFC_IO_MODE_REGIO:
4234 hc->HFC_outb = HFC_outb_regio;
4235 hc->HFC_inb = HFC_inb_regio;
4236 hc->HFC_inw = HFC_inw_regio;
4237 hc->HFC_wait = HFC_wait_regio;
4238 hc->read_fifo = read_fifo_regio;
4239 hc->write_fifo = write_fifo_regio;
4240 break;
4241 default:
4242 printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
4243 pci_disable_device(hc->pci_dev);
4244 return -EIO;
4245 }
4246 hc->HFC_outb_nodebug = hc->HFC_outb;
4247 hc->HFC_inb_nodebug = hc->HFC_inb;
4248 hc->HFC_inw_nodebug = hc->HFC_inw;
4249 hc->HFC_wait_nodebug = hc->HFC_wait;
4250#ifdef HFC_REGISTER_DEBUG
4251 hc->HFC_outb = HFC_outb_debug;
4252 hc->HFC_inb = HFC_inb_debug;
4253 hc->HFC_inw = HFC_inw_debug;
4254 hc->HFC_wait = HFC_wait_debug;
4255#endif
4256 hc->pci_iobase = 0;
4257 hc->pci_membase = NULL;
4258 hc->plx_membase = NULL;
4259
4260 switch (hc->io_mode) {
4261 case HFC_IO_MODE_PLXSD:
4262 hc->plx_origmembase = hc->pci_dev->resource[0].start;
4263 /* MEMBASE 1 is PLX PCI Bridge */
4264
4265 if (!hc->plx_origmembase) {
4266 printk(KERN_WARNING
4267 "HFC-multi: No IO-Memory for PCI PLX bridge found\n");
4268 pci_disable_device(hc->pci_dev);
4269 return -EIO;
4270 }
4271
4272 hc->plx_membase = ioremap(hc->plx_origmembase, 0x80);
4273 if (!hc->plx_membase) {
4274 printk(KERN_WARNING
4275 "HFC-multi: failed to remap plx address space. "
4276 "(internal error)\n");
4277 pci_disable_device(hc->pci_dev);
4278 return -EIO;
4279 }
4280 printk(KERN_INFO
4281 "HFC-multi: plx_membase:%#lx plx_origmembase:%#lx\n",
4282 (u_long)hc->plx_membase, hc->plx_origmembase);
4283
4284 hc->pci_origmembase = hc->pci_dev->resource[2].start;
4285 /* MEMBASE 1 is PLX PCI Bridge */
4286 if (!hc->pci_origmembase) {
4287 printk(KERN_WARNING
4288 "HFC-multi: No IO-Memory for PCI card found\n");
4289 pci_disable_device(hc->pci_dev);
4290 return -EIO;
4291 }
4292
4293 hc->pci_membase = ioremap(hc->pci_origmembase, 0x400);
4294 if (!hc->pci_membase) {
4295 printk(KERN_WARNING "HFC-multi: failed to remap io "
4296 "address space. (internal error)\n");
4297 pci_disable_device(hc->pci_dev);
4298 return -EIO;
4299 }
4300
4301 printk(KERN_INFO
4302 "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d HZ %d "
4303 "leds-type %d\n",
4304 hc->id, (u_long)hc->pci_membase, hc->pci_origmembase,
4305 hc->pci_dev->irq, HZ, hc->leds);
4306 pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
4307 break;
4308 case HFC_IO_MODE_PCIMEM:
4309 hc->pci_origmembase = hc->pci_dev->resource[1].start;
4310 if (!hc->pci_origmembase) {
4311 printk(KERN_WARNING
4312 "HFC-multi: No IO-Memory for PCI card found\n");
4313 pci_disable_device(hc->pci_dev);
4314 return -EIO;
4315 }
4316
4317 hc->pci_membase = ioremap(hc->pci_origmembase, 256);
4318 if (!hc->pci_membase) {
4319 printk(KERN_WARNING
4320 "HFC-multi: failed to remap io address space. "
4321 "(internal error)\n");
4322 pci_disable_device(hc->pci_dev);
4323 return -EIO;
4324 }
4325 printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d "
4326 "HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase,
4327 hc->pci_origmembase, hc->pci_dev->irq, HZ, hc->leds);
4328 pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
4329 break;
4330 case HFC_IO_MODE_REGIO:
4331 hc->pci_iobase = (u_int) hc->pci_dev->resource[0].start;
4332 if (!hc->pci_iobase) {
4333 printk(KERN_WARNING
4334 "HFC-multi: No IO for PCI card found\n");
4335 pci_disable_device(hc->pci_dev);
4336 return -EIO;
4337 }
4338
4339 if (!request_region(hc->pci_iobase, 8, "hfcmulti")) {
4340 printk(KERN_WARNING "HFC-multi: failed to request "
4341 "address space at 0x%08lx (internal error)\n",
4342 hc->pci_iobase);
4343 pci_disable_device(hc->pci_dev);
4344 return -EIO;
4345 }
4346
4347 printk(KERN_INFO
4348 "%s %s: defined at IOBASE %#x IRQ %d HZ %d leds-type %d\n",
4349 m->vendor_name, m->card_name, (u_int) hc->pci_iobase,
4350 hc->pci_dev->irq, HZ, hc->leds);
4351 pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_REGIO);
4352 break;
4353 default:
4354 printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
4355 pci_disable_device(hc->pci_dev);
4356 return -EIO;
4357 }
4358
4359 pci_set_drvdata(hc->pci_dev, hc);
4360
4361 /* At this point the needed PCI config is done */
4362 /* fifos are still not enabled */
4363 return 0;
4364}
4365
4366
4367/*
4368 * remove port
4369 */
4370
4371static void
4372release_port(struct hfc_multi *hc, struct dchannel *dch)
4373{
4374 int pt, ci, i = 0;
4375 u_long flags;
4376 struct bchannel *pb;
4377
4378 ci = dch->slot;
4379 pt = hc->chan[ci].port;
4380
4381 if (debug & DEBUG_HFCMULTI_INIT)
4382 printk(KERN_DEBUG "%s: entered for port %d\n",
4383 __func__, pt + 1);
4384
4385 if (pt >= hc->ports) {
4386 printk(KERN_WARNING "%s: ERROR port out of range (%d).\n",
4387 __func__, pt + 1);
4388 return;
4389 }
4390
4391 if (debug & DEBUG_HFCMULTI_INIT)
4392 printk(KERN_DEBUG "%s: releasing port=%d\n",
4393 __func__, pt + 1);
4394
4395 if (dch->dev.D.protocol == ISDN_P_TE_S0)
4396 l1_event(dch->l1, CLOSE_CHANNEL);
4397
4398 hc->chan[ci].dch = NULL;
4399
4400 if (hc->created[pt]) {
4401 hc->created[pt] = 0;
4402 mISDN_unregister_device(&dch->dev);
4403 }
4404
4405 spin_lock_irqsave(&hc->lock, flags);
4406
4407 if (dch->timer.function) {
4408 del_timer(&dch->timer);
4409 dch->timer.function = NULL;
4410 }
4411
4412 if (hc->type == 1) { /* E1 */
4413 /* remove sync */
4414 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
4415 hc->syncronized = 0;
4416 plxsd_checksync(hc, 1);
4417 }
4418 /* free channels */
4419 for (i = 0; i <= 31; i++) {
4420 if (hc->chan[i].bch) {
4421 if (debug & DEBUG_HFCMULTI_INIT)
4422 printk(KERN_DEBUG
4423 "%s: free port %d channel %d\n",
4424 __func__, hc->chan[i].port+1, i);
4425 pb = hc->chan[i].bch;
4426 hc->chan[i].bch = NULL;
4427 spin_unlock_irqrestore(&hc->lock, flags);
4428 mISDN_freebchannel(pb);
4429 kfree(pb);
4430 kfree(hc->chan[i].coeff);
4431 spin_lock_irqsave(&hc->lock, flags);
4432 }
4433 }
4434 } else {
4435 /* remove sync */
4436 if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
4437 hc->syncronized &=
4438 ~(1 << hc->chan[ci].port);
4439 plxsd_checksync(hc, 1);
4440 }
4441 /* free channels */
4442 if (hc->chan[ci - 2].bch) {
4443 if (debug & DEBUG_HFCMULTI_INIT)
4444 printk(KERN_DEBUG
4445 "%s: free port %d channel %d\n",
4446 __func__, hc->chan[ci - 2].port+1,
4447 ci - 2);
4448 pb = hc->chan[ci - 2].bch;
4449 hc->chan[ci - 2].bch = NULL;
4450 spin_unlock_irqrestore(&hc->lock, flags);
4451 mISDN_freebchannel(pb);
4452 kfree(pb);
4453 kfree(hc->chan[ci - 2].coeff);
4454 spin_lock_irqsave(&hc->lock, flags);
4455 }
4456 if (hc->chan[ci - 1].bch) {
4457 if (debug & DEBUG_HFCMULTI_INIT)
4458 printk(KERN_DEBUG
4459 "%s: free port %d channel %d\n",
4460 __func__, hc->chan[ci - 1].port+1,
4461 ci - 1);
4462 pb = hc->chan[ci - 1].bch;
4463 hc->chan[ci - 1].bch = NULL;
4464 spin_unlock_irqrestore(&hc->lock, flags);
4465 mISDN_freebchannel(pb);
4466 kfree(pb);
4467 kfree(hc->chan[ci - 1].coeff);
4468 spin_lock_irqsave(&hc->lock, flags);
4469 }
4470 }
4471
4472 spin_unlock_irqrestore(&hc->lock, flags);
4473
4474 if (debug & DEBUG_HFCMULTI_INIT)
4475 printk(KERN_DEBUG "%s: free port %d channel D\n", __func__, pt);
4476 mISDN_freedchannel(dch);
4477 kfree(dch);
4478
4479 if (debug & DEBUG_HFCMULTI_INIT)
4480 printk(KERN_DEBUG "%s: done!\n", __func__);
4481}
4482
4483static void
4484release_card(struct hfc_multi *hc)
4485{
4486 u_long flags;
4487 int ch;
4488
4489 if (debug & DEBUG_HFCMULTI_INIT)
4490 printk(KERN_WARNING "%s: release card (%d) entered\n",
4491 __func__, hc->id);
4492
4493 spin_lock_irqsave(&hc->lock, flags);
4494 disable_hwirq(hc);
4495 spin_unlock_irqrestore(&hc->lock, flags);
4496
4497 udelay(1000);
4498
4499 /* dimm leds */
4500 if (hc->leds)
4501 hfcmulti_leds(hc);
4502
4503 /* disable D-channels & B-channels */
4504 if (debug & DEBUG_HFCMULTI_INIT)
4505 printk(KERN_DEBUG "%s: disable all channels (d and b)\n",
4506 __func__);
4507 for (ch = 0; ch <= 31; ch++) {
4508 if (hc->chan[ch].dch)
4509 release_port(hc, hc->chan[ch].dch);
4510 }
4511
4512 /* release hardware & irq */
4513 if (hc->irq) {
4514 if (debug & DEBUG_HFCMULTI_INIT)
4515 printk(KERN_WARNING "%s: free irq %d\n",
4516 __func__, hc->irq);
4517 free_irq(hc->irq, hc);
4518 hc->irq = 0;
4519
4520 }
4521 release_io_hfcmulti(hc);
4522
4523 if (debug & DEBUG_HFCMULTI_INIT)
4524 printk(KERN_WARNING "%s: remove instance from list\n",
4525 __func__);
4526 list_del(&hc->list);
4527
4528 if (debug & DEBUG_HFCMULTI_INIT)
4529 printk(KERN_WARNING "%s: delete instance\n", __func__);
4530 if (hc == syncmaster)
4531 syncmaster = NULL;
4532 kfree(hc);
4533 if (debug & DEBUG_HFCMULTI_INIT)
4534 printk(KERN_WARNING "%s: card successfully removed\n",
4535 __func__);
4536}
4537
4538static int
4539init_e1_port(struct hfc_multi *hc, struct hm_map *m)
4540{
4541 struct dchannel *dch;
4542 struct bchannel *bch;
4543 int ch, ret = 0;
4544 char name[MISDN_MAX_IDLEN];
4545
4546 dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
4547 if (!dch)
4548 return -ENOMEM;
4549 dch->debug = debug;
4550 mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change);
4551 dch->hw = hc;
4552 dch->dev.Dprotocols = (1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1);
4553 dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
4554 (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
4555 dch->dev.D.send = handle_dmsg;
4556 dch->dev.D.ctrl = hfcm_dctrl;
4557 dch->dev.nrbchan = (hc->dslot)?30:31;
4558 dch->slot = hc->dslot;
4559 hc->chan[hc->dslot].dch = dch;
4560 hc->chan[hc->dslot].port = 0;
4561 hc->chan[hc->dslot].nt_timer = -1;
4562 for (ch = 1; ch <= 31; ch++) {
4563 if (ch == hc->dslot) /* skip dchannel */
4564 continue;
4565 bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
4566 if (!bch) {
4567 printk(KERN_ERR "%s: no memory for bchannel\n",
4568 __func__);
4569 ret = -ENOMEM;
4570 goto free_chan;
4571 }
4572 hc->chan[ch].coeff = kzalloc(512, GFP_KERNEL);
4573 if (!hc->chan[ch].coeff) {
4574 printk(KERN_ERR "%s: no memory for coeffs\n",
4575 __func__);
4576 ret = -ENOMEM;
4577 goto free_chan;
4578 }
4579 bch->nr = ch;
4580 bch->slot = ch;
4581 bch->debug = debug;
4582 mISDN_initbchannel(bch, MAX_DATA_MEM);
4583 bch->hw = hc;
4584 bch->ch.send = handle_bmsg;
4585 bch->ch.ctrl = hfcm_bctrl;
4586 bch->ch.nr = ch;
4587 list_add(&bch->ch.list, &dch->dev.bchannels);
4588 hc->chan[ch].bch = bch;
4589 hc->chan[ch].port = 0;
4590 test_and_set_bit(bch->nr, &dch->dev.channelmap[0]);
4591 }
4592 /* set optical line type */
4593 if (port[Port_cnt] & 0x001) {
4594 if (!m->opticalsupport) {
4595 printk(KERN_INFO
4596 "This board has no optical "
4597 "support\n");
4598 } else {
4599 if (debug & DEBUG_HFCMULTI_INIT)
4600 printk(KERN_DEBUG
4601 "%s: PORT set optical "
4602 "interfacs: card(%d) "
4603 "port(%d)\n",
4604 __func__,
4605 HFC_cnt + 1, 1);
4606 test_and_set_bit(HFC_CFG_OPTICAL,
4607 &hc->chan[hc->dslot].cfg);
4608 }
4609 }
4610 /* set LOS report */
4611 if (port[Port_cnt] & 0x004) {
4612 if (debug & DEBUG_HFCMULTI_INIT)
4613 printk(KERN_DEBUG "%s: PORT set "
4614 "LOS report: card(%d) port(%d)\n",
4615 __func__, HFC_cnt + 1, 1);
4616 test_and_set_bit(HFC_CFG_REPORT_LOS,
4617 &hc->chan[hc->dslot].cfg);
4618 }
4619 /* set AIS report */
4620 if (port[Port_cnt] & 0x008) {
4621 if (debug & DEBUG_HFCMULTI_INIT)
4622 printk(KERN_DEBUG "%s: PORT set "
4623 "AIS report: card(%d) port(%d)\n",
4624 __func__, HFC_cnt + 1, 1);
4625 test_and_set_bit(HFC_CFG_REPORT_AIS,
4626 &hc->chan[hc->dslot].cfg);
4627 }
4628 /* set SLIP report */
4629 if (port[Port_cnt] & 0x010) {
4630 if (debug & DEBUG_HFCMULTI_INIT)
4631 printk(KERN_DEBUG
4632 "%s: PORT set SLIP report: "
4633 "card(%d) port(%d)\n",
4634 __func__, HFC_cnt + 1, 1);
4635 test_and_set_bit(HFC_CFG_REPORT_SLIP,
4636 &hc->chan[hc->dslot].cfg);
4637 }
4638 /* set RDI report */
4639 if (port[Port_cnt] & 0x020) {
4640 if (debug & DEBUG_HFCMULTI_INIT)
4641 printk(KERN_DEBUG
4642 "%s: PORT set RDI report: "
4643 "card(%d) port(%d)\n",
4644 __func__, HFC_cnt + 1, 1);
4645 test_and_set_bit(HFC_CFG_REPORT_RDI,
4646 &hc->chan[hc->dslot].cfg);
4647 }
4648 /* set CRC-4 Mode */
4649 if (!(port[Port_cnt] & 0x100)) {
4650 if (debug & DEBUG_HFCMULTI_INIT)
4651 printk(KERN_DEBUG "%s: PORT turn on CRC4 report:"
4652 " card(%d) port(%d)\n",
4653 __func__, HFC_cnt + 1, 1);
4654 test_and_set_bit(HFC_CFG_CRC4,
4655 &hc->chan[hc->dslot].cfg);
4656 } else {
4657 if (debug & DEBUG_HFCMULTI_INIT)
4658 printk(KERN_DEBUG "%s: PORT turn off CRC4"
4659 " report: card(%d) port(%d)\n",
4660 __func__, HFC_cnt + 1, 1);
4661 }
4662 /* set forced clock */
4663 if (port[Port_cnt] & 0x0200) {
4664 if (debug & DEBUG_HFCMULTI_INIT)
4665 printk(KERN_DEBUG "%s: PORT force getting clock from "
4666 "E1: card(%d) port(%d)\n",
4667 __func__, HFC_cnt + 1, 1);
4668 test_and_set_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip);
4669 } else
4670 if (port[Port_cnt] & 0x0400) {
4671 if (debug & DEBUG_HFCMULTI_INIT)
4672 printk(KERN_DEBUG "%s: PORT force putting clock to "
4673 "E1: card(%d) port(%d)\n",
4674 __func__, HFC_cnt + 1, 1);
4675 test_and_set_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip);
4676 }
4677 /* set JATT PLL */
4678 if (port[Port_cnt] & 0x0800) {
4679 if (debug & DEBUG_HFCMULTI_INIT)
4680 printk(KERN_DEBUG "%s: PORT disable JATT PLL on "
4681 "E1: card(%d) port(%d)\n",
4682 __func__, HFC_cnt + 1, 1);
4683 test_and_set_bit(HFC_CHIP_RX_SYNC, &hc->chip);
4684 }
4685 /* set elastic jitter buffer */
4686 if (port[Port_cnt] & 0x3000) {
4687 hc->chan[hc->dslot].jitter = (port[Port_cnt]>>12) & 0x3;
4688 if (debug & DEBUG_HFCMULTI_INIT)
4689 printk(KERN_DEBUG
4690 "%s: PORT set elastic "
4691 "buffer to %d: card(%d) port(%d)\n",
4692 __func__, hc->chan[hc->dslot].jitter,
4693 HFC_cnt + 1, 1);
4694 } else
4695 hc->chan[hc->dslot].jitter = 2; /* default */
4696 snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-e1.%d", HFC_cnt + 1);
4697 ret = mISDN_register_device(&dch->dev, name);
4698 if (ret)
4699 goto free_chan;
4700 hc->created[0] = 1;
4701 return ret;
4702free_chan:
4703 release_port(hc, dch);
4704 return ret;
4705}
4706
4707static int
4708init_multi_port(struct hfc_multi *hc, int pt)
4709{
4710 struct dchannel *dch;
4711 struct bchannel *bch;
4712 int ch, i, ret = 0;
4713 char name[MISDN_MAX_IDLEN];
4714
4715 dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
4716 if (!dch)
4717 return -ENOMEM;
4718 dch->debug = debug;
4719 mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change);
4720 dch->hw = hc;
4721 dch->dev.Dprotocols = (1 << ISDN_P_TE_S0) | (1 << ISDN_P_NT_S0);
4722 dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
4723 (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
4724 dch->dev.D.send = handle_dmsg;
4725 dch->dev.D.ctrl = hfcm_dctrl;
4726 dch->dev.nrbchan = 2;
4727 i = pt << 2;
4728 dch->slot = i + 2;
4729 hc->chan[i + 2].dch = dch;
4730 hc->chan[i + 2].port = pt;
4731 hc->chan[i + 2].nt_timer = -1;
4732 for (ch = 0; ch < dch->dev.nrbchan; ch++) {
4733 bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
4734 if (!bch) {
4735 printk(KERN_ERR "%s: no memory for bchannel\n",
4736 __func__);
4737 ret = -ENOMEM;
4738 goto free_chan;
4739 }
4740 hc->chan[i + ch].coeff = kzalloc(512, GFP_KERNEL);
4741 if (!hc->chan[i + ch].coeff) {
4742 printk(KERN_ERR "%s: no memory for coeffs\n",
4743 __func__);
4744 ret = -ENOMEM;
4745 goto free_chan;
4746 }
4747 bch->nr = ch + 1;
4748 bch->slot = i + ch;
4749 bch->debug = debug;
4750 mISDN_initbchannel(bch, MAX_DATA_MEM);
4751 bch->hw = hc;
4752 bch->ch.send = handle_bmsg;
4753 bch->ch.ctrl = hfcm_bctrl;
4754 bch->ch.nr = ch + 1;
4755 list_add(&bch->ch.list, &dch->dev.bchannels);
4756 hc->chan[i + ch].bch = bch;
4757 hc->chan[i + ch].port = pt;
4758 test_and_set_bit(bch->nr, &dch->dev.channelmap[0]);
4759 }
4760 /* set master clock */
4761 if (port[Port_cnt] & 0x001) {
4762 if (debug & DEBUG_HFCMULTI_INIT)
4763 printk(KERN_DEBUG
4764 "%s: PROTOCOL set master clock: "
4765 "card(%d) port(%d)\n",
4766 __func__, HFC_cnt + 1, pt + 1);
4767 if (dch->dev.D.protocol != ISDN_P_TE_S0) {
4768 printk(KERN_ERR "Error: Master clock "
4769 "for port(%d) of card(%d) is only"
4770 " possible with TE-mode\n",
4771 pt + 1, HFC_cnt + 1);
4772 ret = -EINVAL;
4773 goto free_chan;
4774 }
4775 if (hc->masterclk >= 0) {
4776 printk(KERN_ERR "Error: Master clock "
4777 "for port(%d) of card(%d) already "
4778 "defined for port(%d)\n",
4779 pt + 1, HFC_cnt + 1, hc->masterclk+1);
4780 ret = -EINVAL;
4781 goto free_chan;
4782 }
4783 hc->masterclk = pt;
4784 }
4785 /* set transmitter line to non capacitive */
4786 if (port[Port_cnt] & 0x002) {
4787 if (debug & DEBUG_HFCMULTI_INIT)
4788 printk(KERN_DEBUG
4789 "%s: PROTOCOL set non capacitive "
4790 "transmitter: card(%d) port(%d)\n",
4791 __func__, HFC_cnt + 1, pt + 1);
4792 test_and_set_bit(HFC_CFG_NONCAP_TX,
4793 &hc->chan[i + 2].cfg);
4794 }
4795 /* disable E-channel */
4796 if (port[Port_cnt] & 0x004) {
4797 if (debug & DEBUG_HFCMULTI_INIT)
4798 printk(KERN_DEBUG
4799 "%s: PROTOCOL disable E-channel: "
4800 "card(%d) port(%d)\n",
4801 __func__, HFC_cnt + 1, pt + 1);
4802 test_and_set_bit(HFC_CFG_DIS_ECHANNEL,
4803 &hc->chan[i + 2].cfg);
4804 }
4805 snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d/%d",
4806 hc->type, HFC_cnt + 1, pt + 1);
4807 ret = mISDN_register_device(&dch->dev, name);
4808 if (ret)
4809 goto free_chan;
4810 hc->created[pt] = 1;
4811 return ret;
4812free_chan:
4813 release_port(hc, dch);
4814 return ret;
4815}
4816
4817static int
4818hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
4819{
4820 struct hm_map *m = (struct hm_map *)ent->driver_data;
4821 int ret_err = 0;
4822 int pt;
4823 struct hfc_multi *hc;
4824 u_long flags;
4825 u_char dips = 0, pmj = 0; /* dip settings, port mode Jumpers */
4826
4827 if (HFC_cnt >= MAX_CARDS) {
4828 printk(KERN_ERR "too many cards (max=%d).\n",
4829 MAX_CARDS);
4830 return -EINVAL;
4831 }
4832 if ((type[HFC_cnt] & 0xff) && (type[HFC_cnt] & 0xff) != m->type) {
4833 printk(KERN_WARNING "HFC-MULTI: Card '%s:%s' type %d found but "
4834 "type[%d] %d was supplied as module parameter\n",
4835 m->vendor_name, m->card_name, m->type, HFC_cnt,
4836 type[HFC_cnt] & 0xff);
4837 printk(KERN_WARNING "HFC-MULTI: Load module without parameters "
4838 "first, to see cards and their types.");
4839 return -EINVAL;
4840 }
4841 if (debug & DEBUG_HFCMULTI_INIT)
4842 printk(KERN_DEBUG "%s: Registering %s:%s chip type %d (0x%x)\n",
4843 __func__, m->vendor_name, m->card_name, m->type,
4844 type[HFC_cnt]);
4845
4846 /* allocate card+fifo structure */
4847 hc = kzalloc(sizeof(struct hfc_multi), GFP_KERNEL);
4848 if (!hc) {
4849 printk(KERN_ERR "No kmem for HFC-Multi card\n");
4850 return -ENOMEM;
4851 }
4852 spin_lock_init(&hc->lock);
4853 hc->mtyp = m;
4854 hc->type = m->type;
4855 hc->ports = m->ports;
4856 hc->id = HFC_cnt;
4857 hc->pcm = pcm[HFC_cnt];
4858 hc->io_mode = iomode[HFC_cnt];
4859 if (dslot[HFC_cnt] < 0) {
4860 hc->dslot = 0;
4861 printk(KERN_INFO "HFC-E1 card has disabled D-channel, but "
4862 "31 B-channels\n");
4863 } if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32) {
4864 hc->dslot = dslot[HFC_cnt];
4865 printk(KERN_INFO "HFC-E1 card has alternating D-channel on "
4866 "time slot %d\n", dslot[HFC_cnt]);
4867 } else
4868 hc->dslot = 16;
4869
4870 /* set chip specific features */
4871 hc->masterclk = -1;
4872 if (type[HFC_cnt] & 0x100) {
4873 test_and_set_bit(HFC_CHIP_ULAW, &hc->chip);
4874 silence = 0xff; /* ulaw silence */
4875 } else
4876 silence = 0x2a; /* alaw silence */
4877 if (!(type[HFC_cnt] & 0x200))
4878 test_and_set_bit(HFC_CHIP_DTMF, &hc->chip);
4879
4880 if (type[HFC_cnt] & 0x800)
4881 test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
4882 if (type[HFC_cnt] & 0x1000) {
4883 test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
4884 test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
4885 }
4886 if (type[HFC_cnt] & 0x4000)
4887 test_and_set_bit(HFC_CHIP_EXRAM_128, &hc->chip);
4888 if (type[HFC_cnt] & 0x8000)
4889 test_and_set_bit(HFC_CHIP_EXRAM_512, &hc->chip);
4890 hc->slots = 32;
4891 if (type[HFC_cnt] & 0x10000)
4892 hc->slots = 64;
4893 if (type[HFC_cnt] & 0x20000)
4894 hc->slots = 128;
4895 if (type[HFC_cnt] & 0x80000) {
4896 test_and_set_bit(HFC_CHIP_WATCHDOG, &hc->chip);
4897 hc->wdcount = 0;
4898 hc->wdbyte = V_GPIO_OUT2;
4899 printk(KERN_NOTICE "Watchdog enabled\n");
4900 }
4901
4902 /* setup pci, hc->slots may change due to PLXSD */
4903 ret_err = setup_pci(hc, pdev, ent);
4904 if (ret_err) {
4905 if (hc == syncmaster)
4906 syncmaster = NULL;
4907 kfree(hc);
4908 return ret_err;
4909 }
4910
4911 /* crate channels */
4912 for (pt = 0; pt < hc->ports; pt++) {
4913 if (Port_cnt >= MAX_PORTS) {
4914 printk(KERN_ERR "too many ports (max=%d).\n",
4915 MAX_PORTS);
4916 ret_err = -EINVAL;
4917 goto free_card;
4918 }
4919 if (hc->type == 1)
4920 ret_err = init_e1_port(hc, m);
4921 else
4922 ret_err = init_multi_port(hc, pt);
4923 if (debug & DEBUG_HFCMULTI_INIT)
4924 printk(KERN_DEBUG
4925 "%s: Registering D-channel, card(%d) port(%d)"
4926 "result %d\n",
4927 __func__, HFC_cnt + 1, pt, ret_err);
4928
4929 if (ret_err) {
4930 while (pt) { /* release already registered ports */
4931 pt--;
4932 release_port(hc, hc->chan[(pt << 2) + 2].dch);
4933 }
4934 goto free_card;
4935 }
4936 Port_cnt++;
4937 }
4938
4939 /* disp switches */
4940 switch (m->dip_type) {
4941 case DIP_4S:
4942 /*
4943 * get DIP Setting for beroNet 1S/2S/4S cards
4944 * check if Port Jumper config matches
4945 * module param 'protocol'
4946 * DIP Setting: (collect GPIO 13/14/15 (R_GPIO_IN1) +
4947 * GPI 19/23 (R_GPI_IN2))
4948 */
4949 dips = ((~HFC_inb(hc, R_GPIO_IN1) & 0xE0) >> 5) |
4950 ((~HFC_inb(hc, R_GPI_IN2) & 0x80) >> 3) |
4951 (~HFC_inb(hc, R_GPI_IN2) & 0x08);
4952
4953 /* Port mode (TE/NT) jumpers */
4954 pmj = ((HFC_inb(hc, R_GPI_IN3) >> 4) & 0xf);
4955
4956 if (test_bit(HFC_CHIP_B410P, &hc->chip))
4957 pmj = ~pmj & 0xf;
4958
4959 printk(KERN_INFO "%s: %s DIPs(0x%x) jumpers(0x%x)\n",
4960 m->vendor_name, m->card_name, dips, pmj);
4961 break;
4962 case DIP_8S:
4963 /*
4964 * get DIP Setting for beroNet 8S0+ cards
4965 *
4966 * enable PCI auxbridge function
4967 */
4968 HFC_outb(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
4969 /* prepare access to auxport */
4970 outw(0x4000, hc->pci_iobase + 4);
4971 /*
4972 * some dummy reads are required to
4973 * read valid DIP switch data
4974 */
4975 dips = inb(hc->pci_iobase);
4976 dips = inb(hc->pci_iobase);
4977 dips = inb(hc->pci_iobase);
4978 dips = ~inb(hc->pci_iobase) & 0x3F;
4979 outw(0x0, hc->pci_iobase + 4);
4980 /* disable PCI auxbridge function */
4981 HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
4982 printk(KERN_INFO "%s: %s DIPs(0x%x)\n",
4983 m->vendor_name, m->card_name, dips);
4984 break;
4985 case DIP_E1:
4986 /*
4987 * get DIP Setting for beroNet E1 cards
4988 * DIP Setting: collect GPI 4/5/6/7 (R_GPI_IN0)
4989 */
4990 dips = (~HFC_inb(hc, R_GPI_IN0) & 0xF0)>>4;
4991 printk(KERN_INFO "%s: %s DIPs(0x%x)\n",
4992 m->vendor_name, m->card_name, dips);
4993 break;
4994 }
4995
4996 /* add to list */
4997 spin_lock_irqsave(&HFClock, flags);
4998 list_add_tail(&hc->list, &HFClist);
4999 spin_unlock_irqrestore(&HFClock, flags);
5000
5001 /* initialize hardware */
5002 ret_err = init_card(hc);
5003 if (ret_err) {
5004 printk(KERN_ERR "init card returns %d\n", ret_err);
5005 release_card(hc);
5006 return ret_err;
5007 }
5008
5009 /* start IRQ and return */
5010 spin_lock_irqsave(&hc->lock, flags);
5011 enable_hwirq(hc);
5012 spin_unlock_irqrestore(&hc->lock, flags);
5013 return 0;
5014
5015free_card:
5016 release_io_hfcmulti(hc);
5017 if (hc == syncmaster)
5018 syncmaster = NULL;
5019 kfree(hc);
5020 return ret_err;
5021}
5022
5023static void __devexit hfc_remove_pci(struct pci_dev *pdev)
5024{
5025 struct hfc_multi *card = pci_get_drvdata(pdev);
5026 u_long flags;
5027
5028 if (debug)
5029 printk(KERN_INFO "removing hfc_multi card vendor:%x "
5030 "device:%x subvendor:%x subdevice:%x\n",
5031 pdev->vendor, pdev->device,
5032 pdev->subsystem_vendor, pdev->subsystem_device);
5033
5034 if (card) {
5035 spin_lock_irqsave(&HFClock, flags);
5036 release_card(card);
5037 spin_unlock_irqrestore(&HFClock, flags);
5038 } else {
5039 if (debug)
5040 printk(KERN_WARNING "%s: drvdata allready removed\n",
5041 __func__);
5042 }
5043}
5044
5045#define VENDOR_CCD "Cologne Chip AG"
5046#define VENDOR_BN "beroNet GmbH"
5047#define VENDOR_DIG "Digium Inc."
5048#define VENDOR_JH "Junghanns.NET GmbH"
5049#define VENDOR_PRIM "PrimuX"
5050
5051static const struct hm_map hfcm_map[] = {
5052/*0*/ {VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0},
5053/*1*/ {VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S},
5054/*2*/ {VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0},
5055/*3*/ {VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0},
5056/*4*/ {VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0},
5057/*5*/ {VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0},
5058/*6*/ {VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, 0, 0},
5059/*7*/ {VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0},
5060/*8*/ {VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO},
5061/*9*/ {VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0},
5062/*10*/ {VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0},
5063/*11*/ {VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0},
5064
5065/*12*/ {VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0},
5066/*13*/ {VENDOR_BN, "HFC-8S Card (+)", 8, 8, 1, 8, 0, DIP_8S,
5067 HFC_IO_MODE_REGIO},
5068/*14*/ {VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0},
5069/*15*/ {VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0},
5070
5071/*16*/ {VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0},
5072/*17*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
5073/*18*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
5074
5075/*19*/ {VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0},
5076/*20*/ {VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0},
5077/*21*/ {VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
5078/*22*/ {VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
5079
5080/*23*/ {VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0},
5081/*24*/ {VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0},
5082/*25*/ {VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0},
5083
5084/*26*/ {VENDOR_CCD, "HFC-4S Speech Design", 4, 4, 0, 0, 0, 0,
5085 HFC_IO_MODE_PLXSD},
5086/*27*/ {VENDOR_CCD, "HFC-E1 Speech Design", 1, 1, 0, 0, 0, 0,
5087 HFC_IO_MODE_PLXSD},
5088/*28*/ {VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0},
5089/*29*/ {VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0},
5090/*30*/ {VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0},
5091};
5092
5093#undef H
5094#define H(x) ((unsigned long)&hfcm_map[x])
5095static struct pci_device_id hfmultipci_ids[] __devinitdata = {
5096
5097 /* Cards with HFC-4S Chip */
5098 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5099 PCI_SUBDEVICE_ID_CCD_BN1SM, 0, 0, H(0)}, /* BN1S mini PCI */
5100 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5101 PCI_SUBDEVICE_ID_CCD_BN2S, 0, 0, H(1)}, /* BN2S */
5102 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5103 PCI_SUBDEVICE_ID_CCD_BN2SM, 0, 0, H(2)}, /* BN2S mini PCI */
5104 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5105 PCI_SUBDEVICE_ID_CCD_BN4S, 0, 0, H(3)}, /* BN4S */
5106 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5107 PCI_SUBDEVICE_ID_CCD_BN4SM, 0, 0, H(4)}, /* BN4S mini PCI */
5108 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5109 PCI_DEVICE_ID_CCD_HFC4S, 0, 0, H(5)}, /* Old Eval */
5110 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5111 PCI_SUBDEVICE_ID_CCD_IOB4ST, 0, 0, H(6)}, /* IOB4ST */
5112 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5113 PCI_SUBDEVICE_ID_CCD_HFC4S, 0, 0, H(7)}, /* 4S */
5114 { PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S,
5115 PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S, 0, 0, H(8)},
5116 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5117 PCI_SUBDEVICE_ID_CCD_SWYX4S, 0, 0, H(9)}, /* 4S Swyx */
5118 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5119 PCI_SUBDEVICE_ID_CCD_JH4S20, 0, 0, H(10)},
5120 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5121 PCI_SUBDEVICE_ID_CCD_PMX2S, 0, 0, H(11)}, /* Primux */
5122 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5123 PCI_SUBDEVICE_ID_CCD_OV4S, 0, 0, H(28)}, /* OpenVox 4 */
5124 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
5125 PCI_SUBDEVICE_ID_CCD_OV2S, 0, 0, H(29)}, /* OpenVox 2 */
5126
5127 /* Cards with HFC-8S Chip */
5128 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5129 PCI_SUBDEVICE_ID_CCD_BN8S, 0, 0, H(12)}, /* BN8S */
5130 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5131 PCI_SUBDEVICE_ID_CCD_BN8SP, 0, 0, H(13)}, /* BN8S+ */
5132 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5133 PCI_DEVICE_ID_CCD_HFC8S, 0, 0, H(14)}, /* old Eval */
5134 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5135 PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)},
5136 /* IOB8ST Recording */
5137 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5138 PCI_SUBDEVICE_ID_CCD_IOB8ST, 0, 0, H(16)}, /* IOB8ST */
5139 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5140 PCI_SUBDEVICE_ID_CCD_IOB8ST_1, 0, 0, H(17)}, /* IOB8ST */
5141 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5142 PCI_SUBDEVICE_ID_CCD_HFC8S, 0, 0, H(18)}, /* 8S */
5143 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
5144 PCI_SUBDEVICE_ID_CCD_OV8S, 0, 0, H(30)}, /* OpenVox 8 */
5145
5146
5147 /* Cards with HFC-E1 Chip */
5148 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
5149 PCI_SUBDEVICE_ID_CCD_BNE1, 0, 0, H(19)}, /* BNE1 */
5150 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
5151 PCI_SUBDEVICE_ID_CCD_BNE1M, 0, 0, H(20)}, /* BNE1 mini PCI */
5152 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
5153 PCI_SUBDEVICE_ID_CCD_BNE1DP, 0, 0, H(21)}, /* BNE1 + (Dual) */
5154 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
5155 PCI_SUBDEVICE_ID_CCD_BNE1D, 0, 0, H(22)}, /* BNE1 (Dual) */
5156
5157 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
5158 PCI_DEVICE_ID_CCD_HFCE1, 0, 0, H(23)}, /* Old Eval */
5159 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
5160 PCI_SUBDEVICE_ID_CCD_IOB1E1, 0, 0, H(24)}, /* IOB1E1 */
5161 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
5162 PCI_SUBDEVICE_ID_CCD_HFCE1, 0, 0, H(25)}, /* E1 */
5163
5164 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
5165 PCI_SUBDEVICE_ID_CCD_SPD4S, 0, 0, H(26)}, /* PLX PCI Bridge */
5166 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
5167 PCI_SUBDEVICE_ID_CCD_SPDE1, 0, 0, H(27)}, /* PLX PCI Bridge */
5168 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_ANY_ID, PCI_ANY_ID,
5169 0, 0, 0},
5170 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_ANY_ID, PCI_ANY_ID,
5171 0, 0, 0},
5172 { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_ANY_ID, PCI_ANY_ID,
5173 0, 0, 0},
5174 {0, }
5175};
5176#undef H
5177
5178MODULE_DEVICE_TABLE(pci, hfmultipci_ids);
5179
5180static int
5181hfcmulti_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
5182{
5183 struct hm_map *m = (struct hm_map *)ent->driver_data;
5184 int ret;
5185
5186 if (m == NULL) {
5187 if (ent->vendor == PCI_VENDOR_ID_CCD)
5188 if (ent->device == PCI_DEVICE_ID_CCD_HFC4S ||
5189 ent->device == PCI_DEVICE_ID_CCD_HFC8S ||
5190 ent->device == PCI_DEVICE_ID_CCD_HFCE1)
5191 printk(KERN_ERR
5192 "unknown HFC multiport controller "
5193 "(vendor:%x device:%x subvendor:%x "
5194 "subdevice:%x) Please contact the "
5195 "driver maintainer for support.\n",
5196 ent->vendor, ent->device,
5197 ent->subvendor, ent->subdevice);
5198 return -ENODEV;
5199 }
5200 ret = hfcmulti_init(pdev, ent);
5201 if (ret)
5202 return ret;
5203 HFC_cnt++;
5204 printk(KERN_INFO "%d devices registered\n", HFC_cnt);
5205 return 0;
5206}
5207
5208static struct pci_driver hfcmultipci_driver = {
5209 .name = "hfc_multi",
5210 .probe = hfcmulti_probe,
5211 .remove = __devexit_p(hfc_remove_pci),
5212 .id_table = hfmultipci_ids,
5213};
5214
5215static void __exit
5216HFCmulti_cleanup(void)
5217{
5218 struct hfc_multi *card, *next;
5219
5220 /* unload interrupt function symbol */
5221 if (hfc_interrupt)
5222 symbol_put(ztdummy_extern_interrupt);
5223 if (register_interrupt)
5224 symbol_put(ztdummy_register_interrupt);
5225 if (unregister_interrupt) {
5226 if (interrupt_registered) {
5227 interrupt_registered = 0;
5228 unregister_interrupt();
5229 }
5230 symbol_put(ztdummy_unregister_interrupt);
5231 }
5232
5233 list_for_each_entry_safe(card, next, &HFClist, list)
5234 release_card(card);
5235 /* get rid of all devices of this driver */
5236 pci_unregister_driver(&hfcmultipci_driver);
5237}
5238
5239static int __init
5240HFCmulti_init(void)
5241{
5242 int err;
5243
5244#ifdef IRQ_DEBUG
5245 printk(KERN_ERR "%s: IRQ_DEBUG IS ENABLED!\n", __func__);
5246#endif
5247
5248 spin_lock_init(&HFClock);
5249 spin_lock_init(&plx_lock);
5250
5251 if (debug & DEBUG_HFCMULTI_INIT)
5252 printk(KERN_DEBUG "%s: init entered\n", __func__);
5253
5254#ifdef __BIG_ENDIAN
5255#error "not running on big endian machines now"
5256#endif
5257 hfc_interrupt = symbol_get(ztdummy_extern_interrupt);
5258 register_interrupt = symbol_get(ztdummy_register_interrupt);
5259 unregister_interrupt = symbol_get(ztdummy_unregister_interrupt);
5260 printk(KERN_INFO "mISDN: HFC-multi driver %s\n",
5261 hfcmulti_revision);
5262
5263 switch (poll) {
5264 case 0:
5265 poll_timer = 6;
5266 poll = 128;
5267 break;
5268 /*
5269 * wenn dieses break nochmal verschwindet,
5270 * gibt es heisse ohren :-)
5271 * "without the break you will get hot ears ???"
5272 */
5273 case 8:
5274 poll_timer = 2;
5275 break;
5276 case 16:
5277 poll_timer = 3;
5278 break;
5279 case 32:
5280 poll_timer = 4;
5281 break;
5282 case 64:
5283 poll_timer = 5;
5284 break;
5285 case 128:
5286 poll_timer = 6;
5287 break;
5288 case 256:
5289 poll_timer = 7;
5290 break;
5291 default:
5292 printk(KERN_ERR
5293 "%s: Wrong poll value (%d).\n", __func__, poll);
5294 err = -EINVAL;
5295 return err;
5296
5297 }
5298
5299 err = pci_register_driver(&hfcmultipci_driver);
5300 if (err < 0) {
5301 printk(KERN_ERR "error registering pci driver: %x\n", err);
5302 if (hfc_interrupt)
5303 symbol_put(ztdummy_extern_interrupt);
5304 if (register_interrupt)
5305 symbol_put(ztdummy_register_interrupt);
5306 if (unregister_interrupt) {
5307 if (interrupt_registered) {
5308 interrupt_registered = 0;
5309 unregister_interrupt();
5310 }
5311 symbol_put(ztdummy_unregister_interrupt);
5312 }
5313 return err;
5314 }
5315 return 0;
5316}
5317
5318
5319module_init(HFCmulti_init);
5320module_exit(HFCmulti_cleanup);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c3b1761aba26..ffe479ba0779 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1832,7 +1832,13 @@
1832#define PCI_DEVICE_ID_MOXA_C320 0x3200 1832#define PCI_DEVICE_ID_MOXA_C320 0x3200
1833 1833
1834#define PCI_VENDOR_ID_CCD 0x1397 1834#define PCI_VENDOR_ID_CCD 0x1397
1835#define PCI_DEVICE_ID_CCD_HFC4S 0x08B4
1836#define PCI_SUBDEVICE_ID_CCD_PMX2S 0x1234
1837#define PCI_DEVICE_ID_CCD_HFC8S 0x16B8
1835#define PCI_DEVICE_ID_CCD_2BD0 0x2bd0 1838#define PCI_DEVICE_ID_CCD_2BD0 0x2bd0
1839#define PCI_DEVICE_ID_CCD_HFCE1 0x30B1
1840#define PCI_SUBDEVICE_ID_CCD_SPD4S 0x3136
1841#define PCI_SUBDEVICE_ID_CCD_SPDE1 0x3137
1836#define PCI_DEVICE_ID_CCD_B000 0xb000 1842#define PCI_DEVICE_ID_CCD_B000 0xb000
1837#define PCI_DEVICE_ID_CCD_B006 0xb006 1843#define PCI_DEVICE_ID_CCD_B006 0xb006
1838#define PCI_DEVICE_ID_CCD_B007 0xb007 1844#define PCI_DEVICE_ID_CCD_B007 0xb007
@@ -1842,8 +1848,32 @@
1842#define PCI_DEVICE_ID_CCD_B00B 0xb00b 1848#define PCI_DEVICE_ID_CCD_B00B 0xb00b
1843#define PCI_DEVICE_ID_CCD_B00C 0xb00c 1849#define PCI_DEVICE_ID_CCD_B00C 0xb00c
1844#define PCI_DEVICE_ID_CCD_B100 0xb100 1850#define PCI_DEVICE_ID_CCD_B100 0xb100
1851#define PCI_SUBDEVICE_ID_CCD_IOB4ST 0xB520
1852#define PCI_SUBDEVICE_ID_CCD_IOB8STR 0xB521
1853#define PCI_SUBDEVICE_ID_CCD_IOB8ST 0xB522
1854#define PCI_SUBDEVICE_ID_CCD_IOB1E1 0xB523
1855#define PCI_SUBDEVICE_ID_CCD_SWYX4S 0xB540
1856#define PCI_SUBDEVICE_ID_CCD_JH4S20 0xB550
1857#define PCI_SUBDEVICE_ID_CCD_IOB8ST_1 0xB552
1858#define PCI_SUBDEVICE_ID_CCD_BN4S 0xB560
1859#define PCI_SUBDEVICE_ID_CCD_BN8S 0xB562
1860#define PCI_SUBDEVICE_ID_CCD_BNE1 0xB563
1861#define PCI_SUBDEVICE_ID_CCD_BNE1D 0xB564
1862#define PCI_SUBDEVICE_ID_CCD_BNE1DP 0xB565
1863#define PCI_SUBDEVICE_ID_CCD_BN2S 0xB566
1864#define PCI_SUBDEVICE_ID_CCD_BN1SM 0xB567
1865#define PCI_SUBDEVICE_ID_CCD_BN4SM 0xB568
1866#define PCI_SUBDEVICE_ID_CCD_BN2SM 0xB569
1867#define PCI_SUBDEVICE_ID_CCD_BNE1M 0xB56A
1868#define PCI_SUBDEVICE_ID_CCD_BN8SP 0xB56B
1869#define PCI_SUBDEVICE_ID_CCD_HFC4S 0xB620
1870#define PCI_SUBDEVICE_ID_CCD_HFC8S 0xB622
1845#define PCI_DEVICE_ID_CCD_B700 0xb700 1871#define PCI_DEVICE_ID_CCD_B700 0xb700
1846#define PCI_DEVICE_ID_CCD_B701 0xb701 1872#define PCI_DEVICE_ID_CCD_B701 0xb701
1873#define PCI_SUBDEVICE_ID_CCD_HFCE1 0xC523
1874#define PCI_SUBDEVICE_ID_CCD_OV2S 0xE884
1875#define PCI_SUBDEVICE_ID_CCD_OV4S 0xE888
1876#define PCI_SUBDEVICE_ID_CCD_OV8S 0xE998
1847 1877
1848#define PCI_VENDOR_ID_EXAR 0x13a8 1878#define PCI_VENDOR_ID_EXAR 0x13a8
1849#define PCI_DEVICE_ID_EXAR_XR17C152 0x0152 1879#define PCI_DEVICE_ID_EXAR_XR17C152 0x0152
@@ -2523,6 +2553,9 @@
2523 2553
2524#define PCI_VENDOR_ID_3COM_2 0xa727 2554#define PCI_VENDOR_ID_3COM_2 0xa727
2525 2555
2556#define PCI_VENDOR_ID_DIGIUM 0xd161
2557#define PCI_DEVICE_ID_DIGIUM_HFC4S 0xb410
2558
2526#define PCI_SUBVENDOR_ID_EXSYS 0xd84d 2559#define PCI_SUBVENDOR_ID_EXSYS 0xd84d
2527#define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014 2560#define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014
2528#define PCI_SUBDEVICE_ID_EXSYS_4055 0x4055 2561#define PCI_SUBDEVICE_ID_EXSYS_4055 0x4055
generated by cgit v1.2.2 (git 2.25.0) at 2026-03-04 12:59:38 -0500