2 files changed, 20 insertions, 1 deletions

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 6a8861b39f05..5c246289b4f0 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -353,6 +353,10 @@ static struct i2c_board_info i2c1_devices[] = {
         {
                 I2C_BOARD_INFO("r2025sd", 0x32),
         },
+        {
+                I2C_BOARD_INFO("lis3lv02d", 0x1c),
+                .irq = 33,
+        }
 };
 
 /* KEYSC */
@@ -1115,6 +1119,10 @@ static int __init arch_setup(void)
         gpio_direction_output(GPIO_PTU0, 0);
         mdelay(20);
 
+        /* enable motion sensor */
+        gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+        gpio_direction_input(GPIO_FN_INTC_IRQ1);
+
         /* enable I2C device */
         i2c_register_board_info(0, i2c0_devices,
                                 ARRAY_SIZE(i2c0_devices));
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 37f0de9dd9ce..42f3333c4ad0 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -1052,7 +1052,18 @@ static void __devinit sci_init_single(struct platform_device *dev,
         sci_port->port.ops      = &sci_uart_ops;
         sci_port->port.iotype   = UPIO_MEM;
         sci_port->port.line     = index;
-        sci_port->port.fifosize = 1;
+
+        switch (p->type) {
+        case PORT_SCIFA:
+                sci_port->port.fifosize = 64;
+                break;
+        case PORT_SCIF:
+                sci_port->port.fifosize = 16;
+                break;
+        default:
+                sci_port->port.fifosize = 1;
+                break;
+        }
 
         if (dev) {
                 sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;