1 files changed, 83 insertions, 47 deletions

diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 54e36bfc2c3b..8bd0dea6885f 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -15,6 +15,8 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
+#include <linux/err.h>
+
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
@@ -487,9 +489,8 @@ add_dataflash(struct spi_device *spi, char *name,
         device->write = dataflash_write;
         device->priv = priv;
 
-        dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes, "
-                "erasesize %d bytes\n", name, device->size/1024,
-                 pagesize, pagesize * 8);       /* 8 pages = 1 block */
+        dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes\n",
+                        name, DIV_ROUND_UP(device->size, 1024), pagesize);
         dev_set_drvdata(&spi->dev, priv);
 
         if (mtd_has_partitions()) {
@@ -518,65 +519,57 @@ add_dataflash(struct spi_device *spi, char *name,
         return add_mtd_device(device) == 1 ? -ENODEV : 0;
 }
 
-/*
- * Detect and initialize DataFlash device:
- *
- *   Device      Density         ID code          #Pages PageSize  Offset
- *   AT45DB011B  1Mbit   (128K)  xx0011xx (0x0c)    512    264      9
- *   AT45DB021B  2Mbit   (256K)  xx0101xx (0x14)   1024    264      9
- *   AT45DB041B  4Mbit   (512K)  xx0111xx (0x1c)   2048    264      9
- *   AT45DB081B  8Mbit   (1M)    xx1001xx (0x24)   4096    264      9
- *   AT45DB0161B 16Mbit  (2M)    xx1011xx (0x2c)   4096    528     10
- *   AT45DB0321B 32Mbit  (4M)    xx1101xx (0x34)   8192    528     10
- *   AT45DB0642  64Mbit  (8M)    xx111xxx (0x3c)   8192   1056     11
- *   AT45DB1282  128Mbit (16M)   xx0100xx (0x10)  16384   1056     11
- */
-
 struct flash_info {
         char            *name;
 
-        /* JEDEC id zero means "no ID" (most older chips); otherwise it has
-         * a high byte of zero plus three data bytes: the manufacturer id,
-         * then a two byte device id.
+        /* JEDEC id has a high byte of zero plus three data bytes:
+         * the manufacturer id, then a two byte device id.
          */
         uint32_t        jedec_id;
 
-        /* The size listed here is what works with OPCODE_SE, which isn't
-         * necessarily called a "sector" by the vendor.
-         */
+        /* The size listed here is what works with OP_ERASE_PAGE. */
         unsigned        nr_pages;
         uint16_t        pagesize;
         uint16_t        pageoffset;
 
         uint16_t        flags;
-#define SUP_POW2PS      0x02
-#define IS_POW2PS       0x01
+#define SUP_POW2PS      0x0002          /* supports 2^N byte pages */
+#define IS_POW2PS       0x0001          /* uses 2^N byte pages */
 };
 
 static struct flash_info __devinitdata dataflash_data [] = {
 
-        { "at45db011d",  0x1f2200, 512, 264, 9, SUP_POW2PS},
+        /*
+         * NOTE:  chips with SUP_POW2PS (rev D and up) need two entries,
+         * one with IS_POW2PS and the other without.  The entry with the
+         * non-2^N byte page size can't name exact chip revisions without
+         * losing backwards compatibility for cmdlinepart.
+         *
+         * These newer chips also support 128-byte security registers (with
+         * 64 bytes one-time-programmable) and software write-protection.
+         */
+        { "AT45DB011B",  0x1f2200, 512, 264, 9, SUP_POW2PS},
         { "at45db011d",  0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
 
-        { "at45db021d",  0x1f2300, 1024, 264, 9, SUP_POW2PS},
+        { "AT45DB021B",  0x1f2300, 1024, 264, 9, SUP_POW2PS},
         { "at45db021d",  0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
 
-        { "at45db041d",  0x1f2400, 2048, 264, 9, SUP_POW2PS},
+        { "AT45DB041x",  0x1f2400, 2048, 264, 9, SUP_POW2PS},
         { "at45db041d",  0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
 
-        { "at45db081d",  0x1f2500, 4096, 264, 9, SUP_POW2PS},
+        { "AT45DB081B",  0x1f2500, 4096, 264, 9, SUP_POW2PS},
         { "at45db081d",  0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
 
-        { "at45db161d",  0x1f2600, 4096, 528, 10, SUP_POW2PS},
+        { "AT45DB161x",  0x1f2600, 4096, 528, 10, SUP_POW2PS},
         { "at45db161d",  0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
 
-        { "at45db321c",  0x1f2700, 8192, 528, 10, },
+        { "AT45DB321x",  0x1f2700, 8192, 528, 10, 0},           /* rev C */
 
-        { "at45db321d",  0x1f2701, 8192, 528, 10, SUP_POW2PS},
+        { "AT45DB321x",  0x1f2701, 8192, 528, 10, SUP_POW2PS},
         { "at45db321d",  0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
 
-        { "at45db641d",  0x1f2800, 8192, 1056, 11, SUP_POW2PS},
-        { "at45db641d",  0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
+        { "AT45DB642x",  0x1f2800, 8192, 1056, 11, SUP_POW2PS},
+        { "at45db642d",  0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
 };
 
 static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
@@ -588,17 +581,23 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
         struct flash_info       *info;
         int status;
 
-
         /* JEDEC also defines an optional "extended device information"
          * string for after vendor-specific data, after the three bytes
          * we use here.  Supporting some chips might require using it.
+         *
+         * If the vendor ID isn't Atmel's (0x1f), assume this call failed.
+         * That's not an error; only rev C and newer chips handle it, and
+         * only Atmel sells these chips.
          */
         tmp = spi_write_then_read(spi, &code, 1, id, 3);
         if (tmp < 0) {
                 DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
                         spi->dev.bus_id, tmp);
-                return NULL;
+                return ERR_PTR(tmp);
         }
+        if (id[0] != 0x1f)
+                return NULL;
+
         jedec = id[0];
         jedec = jedec << 8;
         jedec |= id[1];
@@ -609,19 +608,53 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
                         tmp < ARRAY_SIZE(dataflash_data);
                         tmp++, info++) {
                 if (info->jedec_id == jedec) {
+                        DEBUG(MTD_DEBUG_LEVEL1, "%s: OTP, sector protect%s\n",
+                                dev_name(&spi->dev),
+                                (info->flags & SUP_POW2PS)
+                                        ? ", binary pagesize" : ""
+                                );
                         if (info->flags & SUP_POW2PS) {
                                 status = dataflash_status(spi);
-                                if (status & 0x1)
-                                        /* return power of 2 pagesize */
-                                        return ++info;
-                                else
-                                        return info;
+                                if (status < 0) {
+                                        DEBUG(MTD_DEBUG_LEVEL1,
+                                                "%s: status error %d\n",
+                                                dev_name(&spi->dev), status);
+                                        return ERR_PTR(status);
+