diff options
| -rw-r--r-- | drivers/thermal/st/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/thermal/st/Makefile | 1 | ||||
| -rw-r--r-- | drivers/thermal/st/st_thermal_memmap.c | 209 |
3 files changed, 214 insertions, 0 deletions
diff --git a/drivers/thermal/st/Kconfig b/drivers/thermal/st/Kconfig index d7b6e0314b86..490fdbe22eea 100644 --- a/drivers/thermal/st/Kconfig +++ b/drivers/thermal/st/Kconfig | |||
| @@ -6,3 +6,7 @@ config ST_THERMAL | |||
| 6 | config ST_THERMAL_SYSCFG | 6 | config ST_THERMAL_SYSCFG |
| 7 | select ST_THERMAL | 7 | select ST_THERMAL |
| 8 | tristate "STi series syscfg register access based thermal sensors" | 8 | tristate "STi series syscfg register access based thermal sensors" |
| 9 | |||
| 10 | config ST_THERMAL_MEMMAP | ||
| 11 | select ST_THERMAL | ||
| 12 | tristate "STi series memory mapped access based thermal sensors" | ||
diff --git a/drivers/thermal/st/Makefile b/drivers/thermal/st/Makefile index e5058c69248f..b38878977bd8 100644 --- a/drivers/thermal/st/Makefile +++ b/drivers/thermal/st/Makefile | |||
| @@ -1,2 +1,3 @@ | |||
| 1 | obj-$(CONFIG_ST_THERMAL) := st_thermal.o | 1 | obj-$(CONFIG_ST_THERMAL) := st_thermal.o |
| 2 | obj-$(CONFIG_ST_THERMAL_SYSCFG) += st_thermal_syscfg.o | 2 | obj-$(CONFIG_ST_THERMAL_SYSCFG) += st_thermal_syscfg.o |
| 3 | obj-$(CONFIG_ST_THERMAL_MEMMAP) += st_thermal_memmap.o | ||
diff --git a/drivers/thermal/st/st_thermal_memmap.c b/drivers/thermal/st/st_thermal_memmap.c new file mode 100644 index 000000000000..39896ce2ee00 --- /dev/null +++ b/drivers/thermal/st/st_thermal_memmap.c | |||
| @@ -0,0 +1,209 @@ | |||
| 1 | /* | ||
| 2 | * ST Thermal Sensor Driver for memory mapped sensors. | ||
| 3 | * Author: Ajit Pal Singh <ajitpal.singh@st.com> | ||
| 4 | * | ||
| 5 | * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited | ||
| 6 | * | ||
| 7 | * This program is free software; you can redistribute it and/or modify | ||
| 8 | * it under the terms of the GNU General Public License as published by | ||
| 9 | * the Free Software Foundation; either version 2 of the License, or | ||
| 10 | * (at your option) any later version. | ||
| 11 | */ | ||
| 12 | |||
| 13 | #include <linux/of.h> | ||
| 14 | #include <linux/module.h> | ||
| 15 | |||
| 16 | #include "st_thermal.h" | ||
| 17 | |||
| 18 | #define STIH416_MPE_CONF 0x0 | ||
| 19 | #define STIH416_MPE_STATUS 0x4 | ||
| 20 | #define STIH416_MPE_INT_THRESH 0x8 | ||
| 21 | #define STIH416_MPE_INT_EN 0xC | ||
| 22 | |||
| 23 | /* Power control bits for the memory mapped thermal sensor */ | ||
| 24 | #define THERMAL_PDN BIT(4) | ||
| 25 | #define THERMAL_SRSTN BIT(10) | ||
| 26 | |||
| 27 | static const struct reg_field st_mmap_thermal_regfields[MAX_REGFIELDS] = { | ||
| 28 | /* | ||
| 29 | * According to the STIH416 MPE temp sensor data sheet - | ||
| 30 | * the PDN (Power Down Bit) and SRSTN (Soft Reset Bit) need to be | ||
| 31 | * written simultaneously for powering on and off the temperature | ||
| 32 | * sensor. regmap_update_bits() will be used to update the register. | ||
| 33 | */ | ||
| 34 | [INT_THRESH_HI] = REG_FIELD(STIH416_MPE_INT_THRESH, 0, 7), | ||
| 35 | [DCORRECT] = REG_FIELD(STIH416_MPE_CONF, 5, 9), | ||
| 36 | [OVERFLOW] = REG_FIELD(STIH416_MPE_STATUS, 9, 9), | ||
| 37 | [DATA] = REG_FIELD(STIH416_MPE_STATUS, 11, 18), | ||
| 38 | [INT_ENABLE] = REG_FIELD(STIH416_MPE_INT_EN, 0, 0), | ||
| 39 | }; | ||
| 40 | |||
| 41 | static irqreturn_t st_mmap_thermal_trip_handler(int irq, void *sdata) | ||
| 42 | { | ||
| 43 | struct st_thermal_sensor *sensor = sdata; | ||
| 44 | |||
| 45 | thermal_zone_device_update(sensor->thermal_dev); | ||
| 46 | |||
| 47 | return IRQ_HANDLED; | ||
| 48 | } | ||
| 49 | |||
| 50 | /* Private ops for the Memory Mapped based thermal sensors */ | ||
| 51 | static int st_mmap_power_ctrl(struct st_thermal_sensor *sensor, | ||
| 52 | enum st_thermal_power_state power_state) | ||
| 53 | { | ||
| 54 | const unsigned int mask = (THERMAL_PDN | THERMAL_SRSTN); | ||
| 55 | const unsigned int val = power_state ? mask : 0; | ||
| 56 | |||
| 57 | return regmap_update_bits(sensor->regmap, STIH416_MPE_CONF, mask, val); | ||
| 58 | } | ||
| 59 | |||
| 60 | static int st_mmap_alloc_regfields(struct st_thermal_sensor *sensor) | ||
| 61 | { | ||
| 62 | struct device *dev = sensor->dev; | ||
| 63 | struct regmap *regmap = sensor->regmap; | ||
| 64 | const struct reg_field *reg_fields = sensor->cdata->reg_fields; | ||
| 65 | |||
| 66 | sensor->int_thresh_hi = devm_regmap_field_alloc(dev, regmap, | ||
| 67 | reg_fields[INT_THRESH_HI]); | ||
| 68 | sensor->int_enable = devm_regmap_field_alloc(dev, regmap, | ||
| 69 | reg_fields[INT_ENABLE]); | ||
| 70 | |||
| 71 | if (IS_ERR(sensor->int_thresh_hi) || IS_ERR(sensor->int_enable)) { | ||
| 72 | dev_err(dev, "failed to alloc mmap regfields\n"); | ||
| 73 | return -EINVAL; | ||
| 74 | } | ||
| 75 | |||
| 76 | return 0; | ||
| 77 | } | ||
| 78 | |||
| 79 | static int st_mmap_enable_irq(struct st_thermal_sensor *sensor) | ||
| 80 | { | ||
| 81 | int ret; | ||
| 82 | |||
| 83 | /* Set upper critical threshold */ | ||
| 84 | ret = regmap_field_write(sensor->int_thresh_hi, | ||
| 85 | sensor->cdata->crit_temp - | ||
| 86 | sensor->cdata->temp_adjust_val); | ||
| 87 | if (ret) | ||
| 88 | return ret; | ||
| 89 | |||
| 90 | return regmap_field_write(sensor->int_enable, 1); | ||
| 91 | } | ||
| 92 | |||
| 93 | static int st_mmap_register_enable_irq(struct st_thermal_sensor *sensor) | ||
| 94 | { | ||
| 95 | struct device *dev = sensor->dev; | ||
| 96 | struct platform_device *pdev = to_platform_device(dev); | ||
| 97 | int ret; | ||
| 98 | |||
| 99 | sensor->irq = platform_get_irq(pdev, 0); | ||
| 100 | if (sensor->irq < 0) { | ||
| 101 | dev_err(dev, "failed to register IRQ\n"); | ||
| 102 | return sensor->irq; | ||
| 103 | } | ||
| 104 | |||
| 105 | ret = devm_request_threaded_irq(dev, sensor->irq, | ||
| 106 | NULL, st_mmap_thermal_trip_handler, | ||
| 107 | IRQF_TRIGGER_RISING | IRQF_ONESHOT, | ||
| 108 | dev->driver->name, sensor); | ||
| 109 | if (ret) { | ||
| 110 | dev_err(dev, "failed to register IRQ %d\n", sensor->irq); | ||
| 111 | return ret; | ||
| 112 | } | ||
| 113 | |||
| 114 | return st_mmap_enable_irq(sensor); | ||
| 115 | } | ||
| 116 | |||
| 117 | static const struct regmap_config st_416mpe_regmap_config = { | ||
| 118 | .reg_bits = 32, | ||
| 119 | .val_bits = 32, | ||
| 120 | .reg_stride = 4, | ||
| 121 | }; | ||
| 122 | |||
| 123 | static int st_mmap_regmap_init(struct st_thermal_sensor *sensor) | ||
| 124 | { | ||
| 125 | struct device *dev = sensor->dev; | ||
| 126 | struct platform_device *pdev = to_platform_device(dev); | ||
| 127 | struct resource *res; | ||
| 128 | |||
| 129 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||
| 130 | if (!res) { | ||
| 131 | dev_err(dev, "no memory resources defined\n"); | ||
| 132 | return -ENODEV; | ||
| 133 | } | ||
| 134 | |||
| 135 | sensor->mmio_base = devm_ioremap_resource(dev, res); | ||
| 136 | if (IS_ERR(sensor->mmio_base)) { | ||
| 137 | dev_err(dev, "failed to remap IO\n"); | ||
| 138 | return PTR_ERR(sensor->mmio_base); | ||
| 139 | } | ||
| 140 | |||
| 141 | sensor->regmap = devm_regmap_init_mmio(dev, sensor->mmio_base, | ||
| 142 | &st_416mpe_regmap_config); | ||
| 143 | if (IS_ERR(sensor->regmap)) { | ||
| 144 | dev_err(dev, "failed to initialise regmap\n"); | ||
| 145 | return PTR_ERR(sensor->regmap); | ||
| 146 | } | ||
| 147 | |||
| 148 | return 0; | ||
| 149 | } | ||
| 150 | |||
| 151 | static const struct st_thermal_sensor_ops st_mmap_sensor_ops = { | ||
| 152 | .power_ctrl = st_mmap_power_ctrl, | ||
| 153 | .alloc_regfields = st_mmap_alloc_regfields, | ||
| 154 | .regmap_init = st_mmap_regmap_init, | ||
| 155 | .register_enable_irq = st_mmap_register_enable_irq, | ||
| 156 | .enable_irq = st_mmap_enable_irq, | ||
| 157 | }; | ||
| 158 | |||
| 159 | /* Compatible device data stih416 mpe thermal sensor */ | ||
| 160 | const struct st_thermal_compat_data st_416mpe_cdata = { | ||
| 161 | .reg_fields = st_mmap_thermal_regfields, | ||
| 162 | .ops = &st_mmap_sensor_ops, | ||
| 163 | .calibration_val = 14, | ||
| 164 | .temp_adjust_val = -95, | ||
| 165 | .crit_temp = 120, | ||
| 166 | }; | ||
| 167 | |||
| 168 | /* Compatible device data stih407 thermal sensor */ | ||
| 169 | const struct st_thermal_compat_data st_407_cdata = { | ||
| 170 | .reg_fields = st_mmap_thermal_regfields, | ||
| 171 | .ops = &st_mmap_sensor_ops, | ||
| 172 | .calibration_val = 16, | ||
| 173 | .temp_adjust_val = -95, | ||
| 174 | .crit_temp = 120, | ||
| 175 | }; | ||
| 176 | |||
| 177 | static struct of_device_id st_mmap_thermal_of_match[] = { | ||
| 178 | { .compatible = "st,stih416-mpe-thermal", .data = &st_416mpe_cdata }, | ||
| 179 | { .compatible = "st,stih407-thermal", .data = &st_407_cdata }, | ||
| 180 | { /* sentinel */ } | ||
| 181 | }; | ||
| 182 | MODULE_DEVICE_TABLE(of, st_mmap_thermal_of_match); | ||
| 183 | |||
| 184 | int st_mmap_probe(struct platform_device *pdev) | ||
| 185 | { | ||
| 186 | return st_thermal_register(pdev, st_mmap_thermal_of_match); | ||
| 187 | } | ||
| 188 | |||
| 189 | int st_mmap_remove(struct platform_device *pdev) | ||
| 190 | { | ||
| 191 | return st_thermal_unregister(pdev); | ||
| 192 | } | ||
| 193 | |||
| 194 | static struct platform_driver st_mmap_thermal_driver = { | ||
| 195 | .driver = { | ||
| 196 | .name = "st_thermal_mmap", | ||
| 197 | .owner = THIS_MODULE, | ||
| 198 | .pm = &st_thermal_pm_ops, | ||
| 199 | .of_match_table = st_mmap_thermal_of_match, | ||
| 200 | }, | ||
| 201 | .probe = st_mmap_probe, | ||
| 202 | .remove = st_mmap_remove, | ||
| 203 | }; | ||
| 204 | |||
| 205 | module_platform_driver(st_mmap_thermal_driver); | ||
| 206 | |||
| 207 | MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>"); | ||
| 208 | MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver"); | ||
| 209 | MODULE_LICENSE("GPL v2"); | ||
