6 files changed, 466 insertions, 0 deletions

diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 856fcf3b2761..5252e15445b0 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -123,6 +123,10 @@ config BOARD_ATNGW100
 config BOARD_FAVR_32
         bool "Favr-32 LCD-board"
         select CPU_AT32AP7000
+
+config BOARD_MIMC200
+        bool "MIMC200 CPU board"
+        select CPU_AT32AP7000
 endchoice
 
 source "arch/avr32/boards/atstk1000/Kconfig"
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
index 9a0bfdbd7461..b088e103e753 100644
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
@@ -34,6 +34,7 @@ core-y					+= $(machdirs)
 core-$(CONFIG_BOARD_ATSTK1000)          += arch/avr32/boards/atstk1000/
 core-$(CONFIG_BOARD_ATNGW100)           += arch/avr32/boards/atngw100/
 core-$(CONFIG_BOARD_FAVR_32)            += arch/avr32/boards/favr-32/
+core-$(CONFIG_BOARD_MIMC200)            += arch/avr32/boards/mimc200/
 core-$(CONFIG_LOADER_U_BOOT)            += arch/avr32/boot/u-boot/
 core-y                                  += arch/avr32/kernel/
 core-y                                  += arch/avr32/mm/
diff --git a/arch/avr32/boards/mimc200/Makefile b/arch/avr32/boards/mimc200/Makefile
new file mode 100644
index 000000000000..79c076e168a8
--- /dev/null
+++ b/arch/avr32/boards/mimc200/Makefile
@@ -0,0 +1 @@
+obj-y                           += setup.o flash.o fram.o
diff --git a/arch/avr32/boards/mimc200/flash.c b/arch/avr32/boards/mimc200/flash.c
new file mode 100644
index 000000000000..d83d650fc13f
--- /dev/null
+++ b/arch/avr32/boards/mimc200/flash.c
@@ -0,0 +1,143 @@
+/*
+ * MIMC200 board-specific flash initialization
+ *
+ * Copyright (C) 2008 Mercury IMC Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <mach/smc.h>
+
+static struct smc_timing flash_timing __initdata = {
+        .ncs_read_setup         = 0,
+        .nrd_setup              = 15,
+        .ncs_write_setup        = 0,
+        .nwe_setup              = 0,
+
+        .ncs_read_pulse         = 115,
+        .nrd_pulse              = 110,
+        .ncs_write_pulse        = 60,
+        .nwe_pulse              = 60,
+
+        .read_cycle             = 115,
+        .write_cycle            = 100,
+};
+
+static struct smc_config flash_config __initdata = {
+        .bus_width              = 2,
+        .nrd_controlled         = 1,
+        .nwe_controlled         = 1,
+        .byte_write             = 1,
+};
+
+/* system flash definition */
+
+static struct mtd_partition flash_parts_system[] = {
+        {
+                .name           = "u-boot",
+                .offset         = 0x00000000,
+                .size           = 0x00020000,           /* 128 KiB */
+                .mask_flags     = MTD_WRITEABLE,
+        },
+        {
+                .name           = "root",
+                .offset         = 0x00020000,
+                .size           = 0x007c0000,
+        },
+        {
+                .name           = "splash",
+                .offset         = 0x007e0000,
+                .size           = 0x00010000,           /* 64KiB */
+        },
+        {
+                .name           = "env",
+                .offset         = 0x007f0000,
+                .size           = 0x00010000,
+                .mask_flags     = MTD_WRITEABLE,
+        },
+};
+
+static struct physmap_flash_data flash_system = {
+        .width          = 2,
+        .nr_parts       = ARRAY_SIZE(flash_parts_system),
+        .parts          = flash_parts_system,
+};
+
+static struct resource flash_resource_system = {
+        .start          = 0x00000000,
+        .end            = 0x007fffff,
+        .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device_system = {
+        .name           = "physmap-flash",
+        .id             = 0,
+        .resource       = &flash_resource_system,
+        .num_resources  = 1,
+        .dev            = {
+                .platform_data = &flash_system,
+        },
+};
+
+/* data flash definition */
+
+static struct mtd_partition flash_parts_data[] = {
+        {
+                .name           = "data",
+                .offset         = 0x00000000,
+                .size           = 0x00800000,
+        },
+};
+
+static struct physmap_flash_data flash_data = {
+        .width          = 2,
+        .nr_parts       = ARRAY_SIZE(flash_parts_data),
+        .parts          = flash_parts_data,
+};
+
+static struct resource flash_resource_data = {
+        .start          = 0x08000000,
+        .end            = 0x087fffff,
+        .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device_data = {
+        .name           = "physmap-flash",
+        .id             = 1,
+        .resource       = &flash_resource_data,
+        .num_resources  = 1,
+        .dev            = {
+                .platform_data = &flash_data,
+        },
+};
+
+/* This needs to be called after the SMC has been initialized */
+static int __init mimc200_flash_init(void)
+{
+        int ret;
+
+        smc_set_timing(&flash_config, &flash_timing);
+        ret = smc_set_configuration(0, &flash_config);
+        if (ret < 0) {
+                printk(KERN_ERR "mimc200: failed to set 'System' NOR flash timing\n");
+                return ret;
+        }
+        ret = smc_set_configuration(1, &flash_config);
+        if (ret < 0) {
+                printk(KERN_ERR "mimc200: failed to set 'Data' NOR flash timing\n");
+                return ret;
+        }
+
+        platform_device_register(&flash_device_system);
+        platform_device_register(&flash_device_data);
+
+        return 0;
+}
+device_initcall(mimc200_flash_init);
diff --git a/arch/avr32/boards/mimc200/fram.c b/arch/avr32/boards/mimc200/fram.c
new file mode 100644
index 000000000000..54fbd95cee9b
--- /dev/null
+++ b/arch/avr32/boards/mimc200/fram.c
@@ -0,0 +1,80 @@
+/*
+ * FRAM driver for MIMC200 board
+ *
+ * Copyright 2008 Mark Jackson <mpfj@mimc.co.uk>
+ *
+ * This module adds *very* simply support for the system's FRAM device.
+ * At the moment, this is hard-coded to the MIMC200 platform, and only
+ * supports mmap().
+ */
+
+#define FRAM_VERSION    "1.0"
+
+#include <linux/miscdevice.h>
+#include <linux/proc_fs.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+
+#define FRAM_BASE       0xac000000
+#define FRAM_SIZE       0x20000
+
+/*
+ * The are the file operation function for user access to /dev/fram
+ */
+
+static int fram_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+        int ret;
+
+        ret = remap_pfn_range(vma,
+                vma->vm_start,
+                virt_to_phys((void *)((unsigned long)FRAM_BASE)) >> PAGE_SHIFT,
+                vma->vm_end-vma->vm_start,
+                PAGE_SHARED);
+
+        if (ret != 0)
+                return -EAGAIN;
+
+        return 0;
+}
+
+static const struct file_operations fram_fops = {
+        .owner                  = THIS_MODULE,
+        .mmap                   = fram_mmap,
+};
+
+#define FRAM_MINOR      0
+
+static struct miscdevice fram_dev = {
+        FRAM_MINOR,
+        "fram",
+        &fram_fops
+};
+
+static int __init
+fram_init(void)
+{
+        int ret;
+
+        ret = misc_register(&fram_dev);
+        if (ret) {
+                printk(KERN_ERR "fram: can't misc_register on minor=%d\n",
+                    FRAM_MINOR);
+                return ret;
+        }
+        printk(KERN_INFO "FRAM memory driver v" FRAM_VERSION "\n");
+        return 0;
+}
+
+static void __exit
+fram_cleanup_module(void)
+{
+        misc_deregister(&fram_dev);
+}
+
+module_init(fram_init);
+module_exit(fram_cleanup_module);
+
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS_MISCDEV(FRAM_MINOR);
diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
new file mode 100644
index 000000000000..397cbb8f44c8
--- /dev/null
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -0,0 +1,237 @@
+/*
+ * Board-specific setup code for the MIMC200
+ *
+ * Copyright (C) 2008 Mercury IMC Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+extern struct atmel_lcdfb_info mimc200_lcdc_data;
+
+#include <linux/clk.h>
+#include <linux/etherdevice.h>
+#include <linux/i2c-gpio.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <video/atmel_lcdc.h>
+#include <linux/fb.h>
+
+#include <asm/atmel-mci.h>
+#include <linux/io.h>
+#include <asm/setup.h>
+
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
+
+/* Oscillator frequencies. These are board-specific */
+unsigned long at32_board_osc_rates[3] = {
+        [0] = 32768,    /* 32.768 kHz on RTC osc */
+        [1] = 10000000, /* 10 MHz on osc0 */
+        [2] = 12000000, /* 12 MHz on osc1 */
+};
+
+/* Initialized by bootloader-specific startup code. */
+struct tag *bootloader_tags __initdata;
+
+static struct fb_videomode __initdata tx14d14_modes[] = {
+        {
+                .name           = "640x480 @ 60",
+                .refresh        = 60,
+                .xres           = 640,          .yres           = 480,
+                .pixclock       = KHZ2PICOS(11666),
+
+                .left_margin    = 80,           .right_margin   = 1,
+                .upper_margin   = 13,           .lower_margin   = 2,
+                .hsync_len      = 64,           .vsync_len      = 1,
+
+                .sync           = 0,
+                .vmode          = FB_VMODE_NONINTERLACED,
+        },
+};
+
+static struct fb_monspecs __initdata mimc200_default_monspecs = {
+        .manufacturer           = "HIT",
+        .monitor                = "TX14D14VM1BAB",
+        .modedb                 = tx14d14_modes,
+        .modedb_len             = ARRAY_SIZE(tx14d14_modes),
+        .hfmin                  = 14820,
+        .hfmax                  = 22230,
+        .vfmin                  = 60,
+        .vfmax                  = 73.3,
+        .dclkmax                = 25200000,
+};
+
+struct atmel_lcdfb_info __initdata mimc200_lcdc_data = {
+        .default_bpp            = 16,
+        .default_dmacon         = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
+        .default_lcdcon2        = (ATMEL_LCDC_DISTYPE_TFT
+                                   | ATMEL_LCDC_INVCLK
+                                   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
+                                   | ATMEL_LCDC_MEMOR_BIG),
+        .default_monspecs       = &mimc200_default_monspecs,
+        .guard_time             = 2,
+};
+
+struct eth_addr {
+        u8 addr[6];
+};
+static struct eth_addr __initdata hw_addr[2];
+static struct eth_platform_data __initdata eth_data[2];
+
+static struct spi_eeprom eeprom_25lc010 = {
+                .name = "25lc010",
+                .byte_len = 128,
+                .page_size = 16,
+                .flags = EE_ADDR1,
+};
+
+static struct spi_board_info spi0_board_info[] __initdata = {
+        {
+                .modalias       = "rtc-ds1390",
+                .max_speed_hz   = 4000000,
+                .chip_select    = 2,
+        },
+        {
+                .modalias       = "at25",
+                .max_speed_hz   = 1000000,
+                .chip_select    = 1,
+                .mode           = SPI_MODE_3,
+                .platform_data  = &eeprom_25lc010,
+        },
+};
+
+static struct mci_platform_data __initdata mci0_data = {
+        .slot[0] = {
+                .bus_width      = 4,
+                .detect_pin     = GPIO_PIN_PA(26),
+                .wp_pin         = GPIO_PIN_PA(27),
+        },
+};
+
+/*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+ * ethernet address. But we need to keep it around for a while until
+ * we can be reasonably sure the boot loader does this.
+ *
+ * The phy_id is ignored as the driver will probe for it.
+ */
+static int __init parse_tag_ethernet(struct tag *tag)
+{
+        int i;
+
+        i = tag->u.ethernet.mac_index;
+        if (i < ARRAY_SIZE(hw_addr))
+                memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
+                       sizeof(hw_addr[i].addr));
+
+        return 0;
+}
+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
+
+static void __init set_hw_addr(struct platform_device *pdev)
+{
+        struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        const u8 *addr;
+        void __iomem *regs;
+        struct clk *pclk;
+
+        if (!res)
+                return;
+        if (pdev->id >= ARRAY_SIZE(hw_addr))
+                return;
+
+        addr = hw_addr[pdev->id].addr;
+        if (!is_valid_ether_addr(addr))
+                return;
+
+        /*
+         * Since this is board-specific code, we'll cheat and use the
+         * physical address directly as we happen to know that it's
+         * the same as the virtual address.
+         */
+        regs = (void __iomem __force *)res->start;
+        pclk = clk_get(&pdev->dev, "pclk");
+        if (!pclk)
+                return;
+
+        clk_enable(pclk);
+        __raw_writel((addr[3] << 24) | (addr[2] << 16)
+                     | (addr[1] << 8) | addr[0], regs + 0x98);
+        __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
+        clk_disable(pclk);
+        clk_put(pclk);
+}
+
+void __init setup_board(void)
+{
+        at32_map_usart(0, 0);   /* USART 0: /dev/ttyS0 (TTL --> Altera) */
+        at32_map_usart(1, 1);   /* USART 1: /dev/ttyS1 (RS232) */
+        at32_map_usart(2, 2);   /* USART 2: /dev/ttyS2 (RS485) */
+        at32_map_usart(3, 3);   /* USART 3: /dev/ttyS3 (RS422 Multidrop) */
+}
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+        .sda_pin                = GPIO_PIN_PA(6),
+        .scl_pin                = GPIO_PIN_PA(7),
+        .sda_is_open_drain      = 1,
+        .scl_is_open_drain      = 1,
+        .udelay                 = 2,    /* close to 100 kHz */
+};
+
+static struct platform_device i2c_gpio_device = {
+        .name           = "i2c-gpio",
+        .id             = 0,
+        .dev            = {
+        .platform_data  = &i2c_gpio_data,
+        },
+};
+
+static struct i2c_board_info __initdata i2c_info[] = {
+};
+
+static int __init mimc200_init(void)
+{
+        /*
+         * MIMC200 uses 16-bit SDRAM interface, so we don't need to
+         * reserve any pins for it.
+         */
+
+        at32_add_system_devices();
+
+        at32_add_device_usart(0);
+        at32_add_device_usart(1);
+        at32_add_device_usart(2);
+        at32_add_device_usart(3);
+
+        set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+        set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+
+        at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+        at32_add_device_mci(0, &mci0_data);
+        at32_add_device_usba(0, NULL);
+
+        at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP);
+        at32_select_gpio(i2c_gpio_data.sda_pin,
+                AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+        at32_select_gpio(i2c_gpio_data.scl_pin,
+                AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+        platform_device_register(&i2c_gpio_device);
+        i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
+
+        at32_add_device_lcdc(0, &mimc200_lcdc_data,
+                             fbmem_start, fbmem_size, 1);
+
+        return 0;
+}
+postcore_initcall(mimc200_init);