15 files changed, 175 insertions, 226 deletions

diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c
index 51672256072b..b96c636470ef 100644
--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -58,20 +58,11 @@
                 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
         }
 
-/* LSB is in nV to eliminate floating point */
-static const u32 rates_to_lsb[] = {1000000, 250000, 62500, 15625};
-
-/*
- *  scales calculated as:
- *  rates_to_lsb[sample_rate] / (1 << pga);
- *  pga is 1 for 0, 2
- */
-
 static const int mcp3422_scales[4][4] = {
-        { 1000000, 250000, 62500, 15625 },
-        { 500000 , 125000, 31250, 7812 },
-        { 250000 , 62500 , 15625, 3906 },
-        { 125000 , 31250 , 7812 , 1953 } };
+        { 1000000, 500000, 250000, 125000 },
+        { 250000 , 125000, 62500 , 31250  },
+        { 62500  , 31250 , 15625 , 7812   },
+        { 15625  , 7812  , 3906  , 1953   } };
 
 /* Constant msleep times for data acquisitions */
 static const int mcp3422_read_times[4] = {
diff --git a/drivers/iio/adc/qcom-spmi-iadc.c b/drivers/iio/adc/qcom-spmi-iadc.c
index b9666f2f5e51..fabd24edc2a1 100644
--- a/drivers/iio/adc/qcom-spmi-iadc.c
+++ b/drivers/iio/adc/qcom-spmi-iadc.c
@@ -296,7 +296,8 @@ static int iadc_do_conversion(struct iadc_chip *iadc, int chan, u16 *data)
         if (iadc->poll_eoc) {
                 ret = iadc_poll_wait_eoc(iadc, wait);
         } else {
-                ret = wait_for_completion_timeout(&iadc->complete, wait);
+                ret = wait_for_completion_timeout(&iadc->complete,
+                        usecs_to_jiffies(wait));
                 if (!ret)
                         ret = -ETIMEDOUT;
                 else
diff --git a/drivers/iio/common/ssp_sensors/ssp_dev.c b/drivers/iio/common/ssp_sensors/ssp_dev.c
index 52d70435f5a1..55a90082a29b 100644
--- a/drivers/iio/common/ssp_sensors/ssp_dev.c
+++ b/drivers/iio/common/ssp_sensors/ssp_dev.c
@@ -640,6 +640,7 @@ static int ssp_remove(struct spi_device *spi)
         return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int ssp_suspend(struct device *dev)
 {
         int ret;
@@ -688,6 +689,7 @@ static int ssp_resume(struct device *dev)
 
         return 0;
 }
+#endif /* CONFIG_PM_SLEEP */
 
 static const struct dev_pm_ops ssp_pm_ops = {
         SET_SYSTEM_SLEEP_PM_OPS(ssp_suspend, ssp_resume)
diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c
index f57562aa396f..15c73e20272d 100644
--- a/drivers/iio/dac/ad5686.c
+++ b/drivers/iio/dac/ad5686.c
@@ -322,7 +322,7 @@ static int ad5686_probe(struct spi_device *spi)
         st = iio_priv(indio_dev);
         spi_set_drvdata(spi, indio_dev);
 
-        st->reg = devm_regulator_get(&spi->dev, "vcc");
+        st->reg = devm_regulator_get_optional(&spi->dev, "vcc");
         if (!IS_ERR(st->reg)) {
                 ret = regulator_enable(st->reg);
                 if (ret)
diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c
index 623c145d8a97..7d79a1ac5f5f 100644
--- a/drivers/iio/humidity/dht11.c
+++ b/drivers/iio/humidity/dht11.c
@@ -29,6 +29,7 @@
 #include <linux/wait.h>
 #include <linux/bitops.h>
 #include <linux/completion.h>
+#include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
@@ -39,8 +40,12 @@
 
 #define DHT11_DATA_VALID_TIME   2000000000  /* 2s in ns */
 
-#define DHT11_EDGES_PREAMBLE 4
+#define DHT11_EDGES_PREAMBLE 2
 #define DHT11_BITS_PER_READ 40
+/*
+ * Note that when reading the sensor actually 84 edges are detected, but
+ * since the last edge is not significant, we only store 83:
+ */
 #define DHT11_EDGES_PER_READ (2*DHT11_BITS_PER_READ + DHT11_EDGES_PREAMBLE + 1)
 
 /* Data transmission timing (nano seconds) */
@@ -57,6 +62,7 @@ struct dht11 {
         int                             irq;
 
         struct completion               completion;
+        struct mutex                    lock;
 
         s64                             timestamp;
         int                             temperature;
@@ -88,7 +94,7 @@ static int dht11_decode(struct dht11 *dht11, int offset)
         unsigned char temp_int, temp_dec, hum_int, hum_dec, checksum;
 
         /* Calculate timestamp resolution */
-        for (i = 0; i < dht11->num_edges; ++i) {
+        for (i = 1; i < dht11->num_edges; ++i) {
                 t = dht11->edges[i].ts - dht11->edges[i-1].ts;
                 if (t > 0 && t < timeres)
                         timeres = t;
@@ -138,6 +144,27 @@ static int dht11_decode(struct dht11 *dht11, int offset)
         return 0;
 }
 
+/*
+ * IRQ handler called on GPIO edges
+ */
+static irqreturn_t dht11_handle_irq(int irq, void *data)
+{
+        struct iio_dev *iio = data;
+        struct dht11 *dht11 = iio_priv(iio);
+
+        /* TODO: Consider making the handler safe for IRQ sharing */
+        if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
+                dht11->edges[dht11->num_edges].ts = iio_get_time_ns();
+                dht11->edges[dht11->num_edges++].value =
+                                                gpio_get_value(dht11->gpio);
+
+                if (dht11->num_edges >= DHT11_EDGES_PER_READ)
+                        complete(&dht11->completion);
+        }
+
+        return IRQ_HANDLED;
+}
+
 static int dht11_read_raw(struct iio_dev *iio_dev,
                         const struct iio_chan_spec *chan,
                         int *val, int *val2, long m)
@@ -145,6 +172,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
         struct dht11 *dht11 = iio_priv(iio_dev);
         int ret;
 
+        mutex_lock(&dht11->lock);
         if (dht11->timestamp + DHT11_DATA_VALID_TIME < iio_get_time_ns()) {
                 reinit_completion(&dht11->completion);
 
@@ -157,8 +185,17 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
                 if (ret)
                         goto err;
 
+                ret = request_irq(dht11->irq, dht11_handle_irq,
+                                  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+                                  iio_dev->name, iio_dev);
+                if (ret)
+                        goto err;
+
                 ret = wait_for_completion_killable_timeout(&dht11->completion,
                                                                  HZ);
+
+                free_irq(dht11->irq, iio_dev);
+
                 if (ret == 0 && dht11->num_edges < DHT11_EDGES_PER_READ - 1) {
                         dev_err(&iio_dev->dev,
                                         "Only %d signal edges detected\n",
@@ -185,6 +222,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
                 ret = -EINVAL;
 err:
         dht11->num_edges = -1;
+        mutex_unlock(&dht11->lock);
         return ret;
 }
 
@@ -193,27 +231,6 @@ static const struct iio_info dht11_iio_info = {
         .read_raw               = dht11_read_raw,
 };
 
-/*
- * IRQ handler called on GPIO edges
-*/
-static irqreturn_t dht11_handle_irq(int irq, void *data)
-{
-        struct iio_dev *iio = data;
-        struct dht11 *dht11 = iio_priv(iio);
-
-        /* TODO: Consider making the handler safe for IRQ sharing */
-        if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
-                dht11->edges[dht11->num_edges].ts = iio_get_time_ns();
-                dht11->edges[dht11->num_edges++].value =
-                                                gpio_get_value(dht11->gpio);
-
-                if (dht11->num_edges >= DHT11_EDGES_PER_READ)
-                        complete(&dht11->completion);
-        }
-
-        return IRQ_HANDLED;
-}
-
 static const struct iio_chan_spec dht11_chan_spec[] = {
         { .type = IIO_TEMP,
                 .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), },
@@ -256,11 +273,6 @@ static int dht11_probe(struct platform_device *pdev)
                 dev_err(dev, "GPIO %d has no interrupt\n", dht11->gpio);
                 return -EINVAL;
         }
-        ret = devm_request_irq(dev, dht11->irq, dht11_handle_irq,
-                                IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-                                pdev->name, iio);
-        if (ret)
-                return ret;
 
         dht11->timestamp = iio_get_time_ns() - DHT11_DATA_VALID_TIME - 1;
         dht11->num_edges = -1;
@@ -268,6 +280,7 @@ static int dht11_probe(struct platform_device *pdev)
         platform_set_drvdata(pdev, iio);
 
         init_completion(&dht11->completion);
+        mutex_init(&dht11->lock);
         iio->name = pdev->name;
         iio->dev.parent = &pdev->dev;
         iio->info = &dht11_iio_info;
diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c
index b54164677b89..fa3b809aff5e 100644
--- a/drivers/iio/humidity/si7020.c
+++ b/drivers/iio/humidity/si7020.c
@@ -45,12 +45,12 @@ static int si7020_read_raw(struct iio_dev *indio_dev,
                            struct iio_chan_spec const *chan, int *val,
                            int *val2, long mask)
 {
-        struct i2c_client *client = iio_priv(indio_dev);
+        struct i2c_client **client = iio_priv(indio_dev);
         int ret;
 
         switch (mask) {
         case IIO_CHAN_INFO_RAW:
-                ret = i2c_smbus_read_word_data(client,
+                ret = i2c_smbus_read_word_data(*client,
                                                chan->type == IIO_TEMP ?
                                                SI7020CMD_TEMP_HOLD :
                                                SI7020CMD_RH_HOLD);
@@ -126,7 +126,7 @@ static int si7020_probe(struct i2c_client *client,
         /* Wait the maximum power-up time after software reset. */
         msleep(15);
 
-        indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*client));
+        indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
         if (!indio_dev)
                 return -ENOMEM;
 
diff --git a/drivers/iio/imu/adis16400_core.c b/drivers/iio/imu/adis16400_core.c
index b70873de04ea..fa795dcd5f75 100644
--- a/drivers/iio/imu/adis16400_core.c
+++ b/drivers/iio/imu/adis16400_core.c
@@ -26,6 +26,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/debugfs.h>
+#include <linux/bitops.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -414,7 +415,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
                 mutex_unlock(&indio_dev->mlock);
                 if (ret)
                         return ret;
-                val16 = ((val16 & 0xFFF) << 4) >> 4;
+                val16 = sign_extend32(val16, 11);
                 *val = val16;
                 return IIO_VAL_INT;
         case IIO_CHAN_INFO_OFFSET:
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index f73e60b7a796..d8d5bed65e07 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -780,7 +780,11 @@ static int inv_mpu_probe(struct i2c_client *client,
 
         i2c_set_clientdata(client, indio_dev);
         indio_dev->dev.parent = &client->dev;
-        indio_dev->name = id->name;
+        /* id will be NULL when enumerated via ACPI */
+        if (id)
+                indio_dev->name = (char *)id->name;
+        else
+                indio_dev->name = (char *)dev_name(&client->dev);
         indio_dev->channels = inv_mpu_channels;
         indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
 
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index ae68c64bdad3..a224afd6380c 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -73,6 +73,7 @@ config CM36651
 config GP2AP020A00F
         tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
         depends on I2C
+        select REGMAP_I2C
         select IIO_BUFFER
         select IIO_TRIGGERED_BUFFER
         select IRQ_WORK
@@ -126,6 +127,7 @@ config HID_SENSOR_PROX
 config JSA1212
         tristate "JSA1212 ALS and proximity sensor driver"
         depends on I2C
+        select REGMAP_I2C
         help
          Say Y here if you want to build a IIO driver for JSA1212
          proximity & ALS sensor device.
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 4c7a4c52dd06..a5d6de72c523 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -18,6 +18,8 @@ config AK8975
 
 config AK09911
         tristate "Asahi Kasei AK09911 3-axis Compass"
+        depends on I2C
+        depends on GPIOLIB
         select AK8975
         help
           Deprecated: AK09911 is now supported by AK8975 driver.
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c
index 9800c01e6fb9..3f72451d2de0 100644
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -426,7 +426,6 @@ static int pci171x_ai_insn_read(struct comedi_device *dev,
                                 unsigned int *data)
 {
         struct pci1710_private *devpriv = dev->private;
-        unsigned int chan = CR_CHAN(insn->chanspec);
         int ret = 0;
         int i;
 
@@ -447,7 +446,7 @@ static int pci171x_ai_insn_read(struct comedi_device *dev,
                 if (ret)
                         break;
 
-                ret = pci171x_ai_read_sample(dev, s, chan, &val);
+                ret = pci171x_ai_read_sample(dev, s, 0, &val);
                 if (ret)
                         break;
 
diff --git a/drivers/staging/comedi/drivers/comedi_isadma.c b/drivers/staging/comedi/drivers/comedi_isadma.c
index dbdea71d6b95..e856f01ca077 100644
--- a/drivers/staging/comedi/drivers/comedi_isadma.c
+++ b/drivers/staging/comedi/drivers/comedi_isadma.c
@@ -91,9 +91,10 @@ unsigned int comedi_isadma_disable_on_sample(unsigned int dma_chan,
                         stalled++;
                         if (stalled > 10)
                                 break;
+                } else {
+                        residue = new_residue;
+                        stalled = 0;
                 }
-                residue = new_residue;
-                stalled = 0;
         }
         return residue;
 }
diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c
index e37118321a27..a0906685e27f 100644
--- a/drivers/staging/comedi/drivers/vmk80xx.c
+++ b/drivers/staging/comedi/drivers/vmk80xx.c
@@ -103,11 +103,6 @@ enum vmk80xx_model {
         VMK8061_MODEL
 };
 
-struct firmware_version {
-        unsigned char ic3_vers[32];     /* USB-Controller */
-        unsigned char ic6_vers[32];     /* CPU */
-};
-
 static const struct comedi_lrange vmk8061_range = {
         2, {
                 UNI_RANGE(5),
@@ -156,68 +151,12 @@ static const struct vmk80xx_board vmk80xx_boardinfo[] = {
 struct vmk80xx_private {
         struct usb_endpoint_descriptor *ep_rx;
         struct usb_endpoint_descriptor *ep_tx;
-        struct firmware_version fw;
         struct semaphore limit_sem;
         unsigned char *usb_rx_buf;
         unsigned char *usb_tx_buf;
         enum vmk80xx_model model;
 };
 
-static int vmk80xx_check_data_link(struct comedi_device *dev)
-{
-        struct vmk80xx_private *devpriv = dev->private;
-        struct usb_device *usb = comedi_to_usb_dev(dev);
-        unsigned int tx_pipe;
-        unsigned int rx_pipe;
-        unsigned char tx[1];
-        unsigned char rx[2];
-
-        tx_pipe = usb_sndbulkpipe(usb, 0x01);
-        rx_pipe = usb_rcvbulkpipe(usb, 0x81);
-
-        tx[0] = VMK8061_CMD_RD_PWR_STAT;
-
-        /*
-         * Check that IC6 (PIC16F871) is powered and
-         * running and the data link between IC3 and
-         * IC6 is working properly
-         */
-        usb_bulk_msg(usb, tx_pipe, tx, 1, NULL, devpriv->ep_tx->bInterval);
-        usb_bulk_msg(usb, rx_pipe, rx, 2, NULL, HZ * 10);
-
-        return (int)rx[1];
-}
-
-static void vmk80xx_read_eeprom(struct comedi_device *dev, int flag)
-{
-        struct vmk80xx_private *devpriv = dev->private;
-        struct usb_device *usb = comedi_to_usb_dev(dev);
-        unsigned int tx_pipe;
-        unsigned int rx_pipe;
-        unsigned char tx[1];
-        unsigned char rx[64];
-        int cnt;
-
-        tx_pipe = usb_sndbulkpipe(usb, 0x01);
-        rx_pipe = usb_rcvbulkpipe(usb, 0x81);
-
-        tx[0] = VMK8061_CMD_RD_VERSION;
-
-        /*
-         * Read the firmware version info of IC3 and
-         * IC6 from the internal EEPROM of the IC
-         */
-        usb_bulk_msg(usb, tx_pipe, tx, 1, NULL, devpriv->ep_tx->bInterval);
-        usb_bulk_msg(usb, rx_pipe, rx, 64, &cnt, HZ * 10);
-
-        rx[cnt] = '\0';
-
-        if (flag & IC3_VERSION)
-                strncpy(devpriv->fw.ic3_vers, rx + 1, 24);
-        else                    /* IC6_VERSION */
-                strncpy(devpriv->fw.ic6_vers, rx + 25, 24);
-}
-
 static void vmk80xx_do_bulk_msg(struct comedi_device *dev)
 {
         struct vmk80xx_private *devpriv = dev->private;
@@ -878,16 +817,6 @@ static int vmk80xx_auto_attach(struct comedi_device *dev,
 
         usb_set_intfdata(intf, devpriv);
 
-        if (devpriv->model == VMK8061_MODEL) {
-                vmk80xx_read_eeprom(dev, IC3_VERSION);
-                dev_info(&intf->dev, "%s\n", devpriv->fw.ic3_vers);
-
-                if (vmk80xx_check_data_link(dev)) {
-                        vmk80xx_read_eeprom(dev, IC6_VERSION);
-                        dev_info(&intf->dev, "%s\n", devpriv->fw.ic6_vers);
-                }
-        }
-
         if (devpriv->model == VMK8055_MODEL)
                 vmk80xx_reset_device(dev);
 
diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
index d9d6fad7cb00..816174388f13 100644
--- a/drivers/staging/iio/adc/mxs-lradc.c
+++ b/drivers/staging/iio/adc/mxs-lradc.c
@@ -214,11 +214,17 @@ struct mxs_lradc {
         unsigned long           is_divided;
 
         /*
-         * Touchscreen LRADC channels receives a private slot in the CTRL4
-         * register, the slot #7. Therefore only 7 slots instead of 8 in the
-         * CTRL4 register can be mapped to LRADC channels when using the
-         * touchscreen.
-         *
+         * When the touchscreen is enabled, we give it two private virtual
+         * channels: #6 and #7. This means that only 6 virtual channels (instead
+         * of 8) will be available for buffered capture.
+         */
+#define TOUCHSCREEN_VCHANNEL1           7
+#define TOUCHSCREEN_VCHANNEL2           6
+#define BUFFER_VCHANS_LIMITED           0x3f
+#define BUFFER_VCHANS_ALL               0xff
+        u8                      buffer_vchans;
+
+        /*
          * Furthermore, certain LRADC channels are shared between touchscreen
          * and/or touch-buttons and generic LRADC block. Therefore when using
          * either of these, these channels are not available for the regular
@@ -342,6 +348,9 @@ struct mxs_lradc {
 #define LRADC_CTRL4                             0x140
 #define LRADC_CTRL4_LRADCSELECT_MASK(n)         (0xf << ((n) * 4))
 #define LRADC_CTRL4_LRADCSELECT_OFFSET(n)       ((n) * 4)
+#define LRADC_CTRL4_LRADCSELECT(n, x) \
+                                (((x) << LRADC_CTRL4_LRADCSELECT_OFFSET(n)) & \
+                                LRADC_CTRL4_LRADCSELECT_MASK(n))
 
 #define LRADC_RESOLUTION                        12
 #define LRADC_SINGLE_SAMPLE_MASK                ((1 << LRADC_RESOLUTION) - 1)
@@ -416,6 +425,14 @@ static bool mxs_lradc_check_touch_event(struct mxs_lradc *lradc)
                                         LRADC_STATUS_TOUCH_DETECT_RAW);
 }
 
+static void mxs_lradc_map_channel(struct mxs_lradc *lradc, unsigned vch,
+                                  unsigned ch)
+{
+        mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(vch),
+                                LRADC_CTRL4);
+        mxs_lradc_reg_set(lradc, LRADC_CTRL4_LRADCSELECT(vch, ch), LRADC_CTRL4);
+}
+
 static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch)
 {
         /*
@@ -450,12 +467,8 @@ static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch)
                 LRADC_DELAY_DELAY(lradc->over_sample_delay - 1),
                         LRADC_DELAY(3));
 
-        mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(2) |
-                        LRADC_CTRL1_LRADC_IRQ(3) | LRADC_CTRL1_LRADC_IRQ(4) |
-                        LRADC_CTRL1_LRADC_IRQ(5), LRADC_CTRL1);
+        mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch), LRADC_CTRL1);
 
-        /* wake us again, when the complete conversion is done */
-        mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(ch), LRADC_CTRL1);
         /*
          * after changing the touchscreen plates setting
          * the signals need some initial time to settle. Start the
@@ -509,12 +522,8 @@ static void mxs_lradc_setup_ts_pressure(struct mxs_lradc *lradc, unsigned ch1,
                 LRADC_DELAY_DELAY(lradc->over_sample_delay - 1),
                                         LRADC_DELAY(3));
 
-        mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(2) |
-                        LRADC_CTRL1_LRADC_IRQ(3) | LRADC_CTRL1_LRADC_IRQ(4) |
-                        LRADC_CTRL1_LRADC_IRQ(5), LRADC_CTRL1);
+        mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch2), LRADC_CTRL1);
 
-        /* wake us again, when the conversions are done */
-        mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(ch2), LRADC_CTRL1);
         /*
          * after changing the touchscreen plates setting
          * the signals need some initial time to settle. Start the
@@ -580,36 +589,6 @@ static unsigned mxs_lradc_read_ts_pressure(struct mxs_lradc *lradc,
 #define TS_CH_XM 4
 #define TS_CH_YM 5
 
-static int mxs_lradc_read_ts_channel(struct mxs_lradc *lradc)
-{
-        u32 reg;
-        int val;
-
-        reg = readl(lradc->base + LRADC_CTRL1);
-
-        /* only channels 3 to 5 are of interest here */
-        if (reg & LRADC_CTRL1_LRADC_IRQ(TS_CH_YP)) {
-                mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(TS_CH_YP) |
-                        LRADC_CTRL1_LRADC_IRQ(TS_CH_YP), LRADC_CTRL1);
-                val = mxs_lradc_read_raw_channel(lradc, TS_CH_YP);
-        } else if (reg & LRADC_CTRL1_LRADC_IRQ(TS_CH_XM)) {
-                mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(TS_CH_XM) |
-                        LRADC_CTRL1_LRADC_IRQ(TS_CH_XM), LRADC_CTRL1);
-                val = mxs_lradc_read_raw_channel(lradc, TS_CH_XM);
-        } else if (reg & LRADC_CTRL1_LRADC_IRQ(TS_CH_YM)) {
-                mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(TS_CH_YM) |
-                        LRADC_CTRL1_LRADC_IRQ(TS_CH_YM), LRADC_CTRL1);
-                val = mxs_lradc_read_raw_channel(lradc, TS_CH_YM);
-        } else {
-                return -EIO;
-        }
-
-        mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2));
-        mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3));
-
-        return val;
-}
-
 /*
  * YP(open)--+-------------+
  *           |             |--+
@@ -653,7 +632,8 @@ static void mxs_lradc_prepare_x_pos(struct mxs_lradc *lradc)
         mxs_lradc_reg_set(lradc, mxs_lradc_drive_x_plate(lradc), LRADC_CTRL0);
 
         lradc->cur_plate = LRADC_SAMPLE_X;
-        mxs_lradc_setup_ts_channel(lradc, TS_CH_YP);
+        mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YP);
+        mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1);
 }
 
 /*
@@ -674,7 +654,8 @@ static void mxs_lradc_prepare_y_pos(struct mxs_lradc *lradc)
         mxs_lradc_reg_set(lradc, mxs_lradc_drive_y_plate(lradc), LRADC_CTRL0);
 
         lradc->cur_plate = LRADC_SAMPLE_Y;
-        mxs_lradc_setup_ts_channel(lradc, TS_CH_XM);
+        mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_XM);
+        mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1);
 }
 
 /*
@@ -695,7 +676,10 @@ static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc)
         mxs_lradc_reg_set(lradc, mxs_lradc_drive_pressure(lradc), LRADC_CTRL0);
 
         lradc->cur_plate = LRADC_SAMPLE_PRESSURE;
-        mxs_lradc_setup_ts_pressure(lradc, TS_CH_XP, TS_CH_YM);
+        mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YM);
+        mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL2, TS_CH_XP);
+        mxs_lradc_setup_ts_pressure(lradc, TOUCHSCREEN_VCHANNEL2,
+                                                TOUCHSCREEN_VCHANNEL1);
 }
 
 static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc)
@@ -708,6 +692,19 @@ static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc)
         mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
 }
 
+static void mxs_lradc_start_touch_event(struct mxs_lradc *lradc)
+{
+        mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
+                                LRADC_CTRL1);
+        mxs_lradc_reg_set(lradc,
+                LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1), LRADC_CTRL1);
+        /*
+         * start with the Y-pos, because it uses nearly the same plate
+         * settings like the touch detection
+         */
+        mxs_lradc_prepare_y_pos(lradc);
+}
+
 static void mxs_lradc_report_ts_event(struct mxs_lradc *lradc)
 {
         input_report_abs(lradc->ts_input, ABS_X, lradc->ts_x_pos);
@@ -725,10 +722,12 @@ static void mxs_lradc_complete_touch_event(struct mxs_lradc *lradc)
          * start a dummy conversion to burn time to settle the signals
          * note: we are not interested in the conversion's value
          */
-        mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(5));
-        mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(5), LRADC_CTRL1);
-        mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(5), LRADC_CTRL1);
-        mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << 5) |
+        mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(TOUCHSCREEN_VCHANNEL1));
+        mxs_lradc_reg_clear(lradc,
+                LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
+                LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1);
+        mxs_lradc_reg_wrt(lradc,
+                LRADC_DELAY_TRIGGER(1 << TOUCHSCREEN_VCHANNEL1) |
                 LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10), /* waste 5 ms */
                         LRADC_DELAY(2));
 }
@@ -760,59 +759,45 @@ static void mxs_lradc_finish_touch_event(struct mxs_lradc *lradc, bool valid)
 
         /* if it is released, wait for the next touch via IRQ */
         lradc->cur_plate = LRADC_TOUCH;
-        mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ, LRADC_CTRL1);
+        mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2));
+        mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3));
+        mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ |
+                LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) |
+                LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1), LRADC_CTRL1);
         mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
 }
 
 /* touchscreen's state machine */
 static void mxs_lradc_handle_touch(struct mxs_lradc *lradc)
 {
-        int val;
-
         switch (lradc->cur_plate) {
         case LRADC_TOUCH:
-                /*
-                 * start with the Y-pos, because it uses nearly the same plate
-                 * settings like the touch detection
-                 */
-                if (mxs_lradc_check_touch_event(lradc)) {
-                        mxs_lradc_reg_clear(lradc,
-                                        LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
-                                        LRADC_CTRL1);
-                        mxs_lradc_prepare_y_pos(lradc);
-                }
+                if (mxs_lradc_check_touch_event(lradc))
+                        mxs_lradc_start_touch_event(lradc);
                 mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ,
                                         LRADC_CTRL1);
                 return;
 
         case LRADC_SAMPLE_Y:
-                val = mxs_lradc_read_ts_channel(lradc);
-                if (val < 0) {
-                        mxs_lradc_enable_touch_detection(lradc); /* re-start */
-                        return;
-                }
-                lradc->ts_y_pos = val;
+                lradc->ts_y_pos = mxs_lradc_read_raw_channel(lradc,
+                                                        TOUCHSCREEN_VCHANNEL1);
                 mxs_lradc_prepare_x_pos(lradc);
                 return;
 
         case LRADC_SAMPLE_X:
-                val = mxs_lradc_read_ts_channel(lradc);
-                if (val < 0) {
-                        mxs_lradc_enable_touch_detection(lradc); /* re-start */
-                        return;
-                }
-                lradc->ts_x_pos = val;
+                lradc->ts_x_pos = mxs_lradc_read_raw_channel(lradc,
+                                                        TOUCHSCREEN_VCHANNEL1);
                 mxs_lradc_prepare_pressure(lradc);
                 return;
 
         case LRADC_SAMPLE_PRESSURE:
-                lradc->ts_pressure =
-                        mxs_lradc_read_ts_pressure(lradc, TS_CH_XP, TS_CH_YM);
+                lradc->ts_pressure = mxs_lradc_read_ts_pressure(lradc,
+                                                        TOUCHSCREEN_VCHANNEL2,
+                                                        TOUCHSCREEN_VCHANNEL1);
                 mxs_lradc_complete_touch_event(lradc);
                 return;
 
         case LRADC_SAMPLE_VALID:
-                val = mxs_lradc_read_ts_channel(lradc); /* ignore the value */
                 mxs_lradc_finish_touch_event(lradc, 1);
                 break;
         }
@@ -844,9 +829,9 @@ static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val)
          * used if doing raw sampling.
          */
         if (lradc->soc == IMX28_LRADC)
-                mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
+                mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0),
                         LRADC_CTRL1);
-        mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
+        mxs_lradc_reg_clear(lradc, 0x1, LRADC_CTRL0);
 
         /* Enable / disable the divider per requirement */
         if (test_bit(chan, &lradc->is_divided))
@@ -1090,9 +1075,8 @@ static void mxs_lradc_disable_ts(struct mxs_lradc *lradc)
 {
         /* stop all interrupts from firing */
         mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN |
-                LRADC_CTRL1_LRADC_IRQ_EN(2) | LRADC_CTRL1_LRADC_IRQ_EN(3) |
-                LRADC_CTRL1_LRADC_IRQ_EN(4) | LRADC_CTRL1_LRADC_IRQ_EN(5),
-                LRADC_CTRL1);
+                LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) |
+                LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1);
 
         /* Power-down touchscreen touch-detect circuitry. */
         mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
@@ -1158,26 +1142,31 @@ static irqreturn_t mxs_lradc_handle_irq(int irq, void *data)
         struct iio_dev *iio = data;
         struct mxs_lradc *lradc = iio_priv(iio);
         unsigned long reg = readl(lradc->base + LRADC_CTRL1);
+        uint32_t clr_irq = mxs_lradc_irq_mask(lradc);
         const uint32_t ts_irq_mask =
                 LRADC_CTRL1_TOUCH_DETECT_IRQ |
-                LRADC_CTRL1_LRADC_IRQ(2) |
-                LRADC_CTRL1_LRADC_IRQ(3) |
-                LRADC_CTRL1_LRADC_IRQ(4) |
-                LRADC_CTRL1_LRADC_IRQ(5);
+                LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
+                LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2);
 
         if (!(reg & mxs_lradc_irq_mask(lradc)))
                 return IRQ_NONE;
 
-        if (lradc->use_touchscreen && (reg & ts_irq_mask))
+        if (lradc->use_touchscreen && (reg & ts_irq_mask)) {
                 mxs_lradc_handle_touch(lradc);
 
-        if (iio_buffer_enabled(iio))
-                iio_trigger_poll(iio->trig);
-        else if (reg & LRADC_CTRL1_LRADC_IRQ(0))
+                /* Make sure we don't clear the next conversion's interrupt. */
+                clr_irq &= ~(LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
+                                LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2));
+        }
+
+        if (iio_buffer_enabled(iio)) {
+                if (reg & lradc->buffer_vchans)
+                        iio_trigger_poll(iio->trig);
+        } else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) {
                 complete(&lradc->completion);
+        }
 
-        mxs_lradc_reg_clear(lradc, reg & mxs_lradc_irq_mask(lradc),
-                        LRADC_CTRL1);
+        mxs_lradc_reg_clear(lradc, reg & clr_irq, LRADC_CTRL1);
 
         return IRQ_HANDLED;
 }
@@ -1289,9 +1278,10 @@ static int mxs_lradc_buffer_preenable(struct iio_dev *iio)
         }
 
         if (lradc->soc == IMX28_LRADC)
-                mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
-                                                        LRADC_CTRL1);
-        mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
+                mxs_lradc_reg_clear(lradc,
+                        lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET,
+                        LRADC_CTRL1);
+        mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0);
 
         for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) {
                 ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs);
@@ -1324,10 +1314,11 @@ static int mxs_lradc_buffer_postdisable(struct iio_dev *iio)
         mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK |
                                         LRADC_DELAY_KICK, LRADC_DELAY(0));
 
-        mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
+        mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0);
         if (lradc->soc == IMX28_LRADC)
-                mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
-                                        LRADC_CTRL1);
+                mxs_lradc_reg_clear(lradc,
+                        lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET,
+                        LRADC_CTRL1);
 
         kfree(lradc->buffer);
         mutex_unlock(&lradc->lock);
@@ -1353,7 +1344,7 @@ static bool mxs_lradc_validate_scan_mask(struct iio_dev *iio,
         if (lradc->use_touchbutton)
                 rsvd_chans++;
         if (lradc->use_touchscreen)
-                rsvd_chans++;
+                rsvd_chans += 2;
 
         /* Test for attempts to map channels with special mode of operation. */
         if (bitmap_intersects(mask, &rsvd_mask, LRADC_MAX_TOTAL_CHANS))
@@ -1413,6 +1404,13 @@ static const struct iio_chan_spec mxs_lradc_chan_spec[] = {
                 .channel = 8,
                 .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,},
         },
+        /* Hidden channel to keep indexes */
+        {
+                .type = IIO_TEMP,
+                .indexed = 1,
+                .scan_index = -1,
+                .channel = 9,
+        },
         MXS_ADC_CHAN(10, IIO_VOLTAGE),  /* VDDIO */
         MXS_ADC_CHAN(11, IIO_VOLTAGE),  /* VTH */
         MXS_ADC_CHAN(12, IIO_VOLTAGE),  /* VDDA */
@@ -1583,6 +1581,11 @@ static int mxs_lradc_probe(struct platform_device *pdev)
 
         touch_ret = mxs_lradc_probe_touchscreen(lradc, node);
 
+        if (touch_ret == 0)
+                lradc->buffer_vchans = BUFFER_VCHANS_LIMITED;
+        else
+                lradc->buffer_vchans = BUFFER_VCHANS_ALL;
+
         /* Grab all IRQ sources */
         for (i = 0; i < of_cfg->irq_count; i++) {
                 lradc->irq[i] = platform_get_irq(pdev, i);
diff --git a/drivers/staging/iio/resolver/ad2s1200.c b/drivers/staging/iio/resolver/ad2s1200.c
index 017d2f8379b7..c17893b4918c 100644
--- a/drivers/staging/iio/resolver/ad2s1200.c
+++ b/drivers/staging/iio/resolver/ad2s1200.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/module.h>
+#include <linux/bitops.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -68,7 +69,7 @@ static int ad2s1200_read_raw(struct iio_dev *indio_dev,
                 break;
         case IIO_ANGL_VEL:
                 vel = (((s16)(st->rx[0])) << 4) | ((st->rx[1] & 0xF0) >> 4);
-                vel = (vel << 4) >> 4;
+                vel = sign_extend32(vel, 11);
                 *val = vel;
                 break;
         default: