1 files changed, 42 insertions, 39 deletions

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 436b6828afdd..bc9123c0c685 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -93,14 +93,19 @@ config USB_EHCI_TT_NEWSCHED
 
           If unsure, say Y.
 
+config USB_FSL_MPH_DR_OF
+        tristate
+
+if USB_EHCI_HCD
+
 config USB_EHCI_PCI
         tristate
-        depends on USB_EHCI_HCD && PCI
+        depends on PCI
         default y
 
 config USB_EHCI_HCD_PMC_MSP
         tristate "EHCI support for on-chip PMC MSP71xx USB controller"
-        depends on USB_EHCI_HCD && MSP_HAS_USB
+        depends on MSP_HAS_USB
         default n
         select USB_EHCI_BIG_ENDIAN_DESC
         select USB_EHCI_BIG_ENDIAN_MMIO
@@ -110,15 +115,13 @@ config USB_EHCI_HCD_PMC_MSP
 
 config USB_EHCI_BIG_ENDIAN_MMIO
         bool
-        depends on USB_EHCI_HCD
 
 config USB_EHCI_BIG_ENDIAN_DESC
         bool
-        depends on USB_EHCI_HCD
 
 config XPS_USB_HCD_XILINX
         bool "Use Xilinx usb host EHCI controller core"
-        depends on USB_EHCI_HCD && (PPC32 || MICROBLAZE)
+        depends on (PPC32 || MICROBLAZE)
         select USB_EHCI_BIG_ENDIAN_DESC
         select USB_EHCI_BIG_ENDIAN_MMIO
         ---help---
@@ -127,12 +130,9 @@ config XPS_USB_HCD_XILINX
                 support both high speed and full speed devices, or high speed
                 devices only.
 
-config USB_FSL_MPH_DR_OF
-        tristate
-
 config USB_EHCI_FSL
         bool "Support for Freescale PPC on-chip EHCI USB controller"
-        depends on USB_EHCI_HCD && FSL_SOC
+        depends on FSL_SOC
         select USB_EHCI_ROOT_HUB_TT
         select USB_FSL_MPH_DR_OF if OF
         ---help---
@@ -140,14 +140,14 @@ config USB_EHCI_FSL
 
 config USB_EHCI_MXC
         tristate "Support for Freescale i.MX on-chip EHCI USB controller"
-        depends on USB_EHCI_HCD && ARCH_MXC
+        depends on ARCH_MXC
         select USB_EHCI_ROOT_HUB_TT
         ---help---
           Variation of ARC USB block used in some Freescale chips.
 
 config USB_EHCI_HCD_OMAP
         tristate "EHCI support for OMAP3 and later chips"
-        depends on USB_EHCI_HCD && ARCH_OMAP
+        depends on ARCH_OMAP
         select NOP_USB_XCEIV
         default y
         ---help---
@@ -183,7 +183,7 @@ config USB_EHCI_HCD_AT91
 
 config USB_EHCI_MSM
         tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller"
-        depends on USB_EHCI_HCD && ARCH_MSM
+        depends on ARCH_MSM
         select USB_EHCI_ROOT_HUB_TT
         select USB_MSM_OTG
         ---help---
@@ -196,7 +196,7 @@ config USB_EHCI_MSM
 
 config USB_EHCI_TEGRA
        boolean "NVIDIA Tegra HCD support"
-       depends on USB_EHCI_HCD && ARCH_TEGRA
+       depends on ARCH_TEGRA
        select USB_EHCI_ROOT_HUB_TT
        select USB_PHY
        help
@@ -205,7 +205,7 @@ config USB_EHCI_TEGRA
 
 config USB_EHCI_HCD_PPC_OF
         bool "EHCI support for PPC USB controller on OF platform bus"
-        depends on USB_EHCI_HCD && PPC_OF
+        depends on PPC_OF
         default y
         ---help---
           Enables support for the USB controller present on the PowerPC
@@ -213,21 +213,21 @@ config USB_EHCI_HCD_PPC_OF
 
 config USB_EHCI_SH
         bool "EHCI support for SuperH USB controller"
-        depends on USB_EHCI_HCD && SUPERH
+        depends on SUPERH
         ---help---
           Enables support for the on-chip EHCI controller on the SuperH.
           If you use the PCI EHCI controller, this option is not necessary.
 
 config USB_EHCI_S5P
        tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
-       depends on USB_EHCI_HCD && PLAT_S5P
+       depends on PLAT_S5P
        help
         Enable support for the Samsung S5Pxxxx and Exynos3/4/5 SOC's
         on-chip EHCI controller.
 
 config USB_EHCI_MV
         bool "EHCI support for Marvell PXA/MMP USB controller"
-        depends on USB_EHCI_HCD && (ARCH_PXA || ARCH_MMP)
+        depends on (ARCH_PXA || ARCH_MMP)
         select USB_EHCI_ROOT_HUB_TT
         ---help---
           Enables support for Marvell (including PXA and MMP series) on-chip
@@ -240,13 +240,13 @@ config USB_EHCI_MV
 
 config USB_W90X900_EHCI
         bool "W90X900(W90P910) EHCI support"
-        depends on USB_EHCI_HCD && ARCH_W90X900
+        depends on ARCH_W90X900
         ---help---
                 Enables support for the W90X900 USB controller
 
 config USB_CNS3XXX_EHCI
         bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
-        depends on USB_EHCI_HCD && ARCH_CNS3XXX
+        depends on ARCH_CNS3XXX
         select USB_EHCI_HCD_PLATFORM
         ---help---
           This option is deprecated now and the driver was removed, use
@@ -258,7 +258,7 @@ config USB_CNS3XXX_EHCI
 
 config USB_EHCI_ATH79
         bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
-        depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
+        depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
         select USB_EHCI_ROOT_HUB_TT
         select USB_EHCI_HCD_PLATFORM
         default y
@@ -269,6 +269,28 @@ config USB_EHCI_ATH79
           Enables support for the built-in EHCI controller present
           on the Atheros AR7XXX/AR9XXX SoCs.
 
+config USB_EHCI_HCD_PLATFORM
+        tristate "Generic EHCI driver for a platform device"
+        default n
+        ---help---
+          Adds an EHCI host driver for a generic platform device, which
+          provides a memory space and an irq.
+
+          If unsure, say N.
+
+config USB_OCTEON_EHCI
+        bool "Octeon on-chip EHCI support"
+        depends on CPU_CAVIUM_OCTEON
+        default n
+        select USB_EHCI_BIG_ENDIAN_MMIO
+        help
+          Enable support for the Octeon II SOC's on-chip EHCI
+          controller.  It is needed for high-speed (480Mbit/sec)
+          USB 2.0 device support.  All CN6XXX based chips with USB are
+          supported.
+
+endif # USB_EHCI_HCD
+
 config USB_OXU210HP_HCD
         tristate "OXU210HP HCD support"
         depends on GENERIC_HARDIRQS
@@ -450,15 +472,6 @@ config USB_OHCI_HCD_PLATFORM
 
           If unsure, say N.
 
-config USB_EHCI_HCD_PLATFORM
-        tristate "Generic EHCI driver for a platform device"
-        depends on USB_EHCI_HCD
-        default n
-        ---help---
-          Adds an EHCI host driver for a generic platform device, which
-          provides a memory space and an irq.
-
-          If unsure, say N.
 
 config USB_OHCI_BIG_ENDIAN_DESC
         bool
@@ -651,16 +664,6 @@ config USB_IMX21_HCD
          To compile this driver as a module, choose M here: the
          module will be called "imx21-hcd".
 
-config USB_OCTEON_EHCI
-        bool "Octeon on-chip EHCI support"
-        depends on USB_EHCI_HCD && CPU_CAVIUM_OCTEON
-        default n
-        select USB_EHCI_BIG_ENDIAN_MMIO
-        help
-          Enable support for the Octeon II SOC's on-chip EHCI
-          controller.  It is needed for high-speed (480Mbit/sec)
-          USB 2.0 device support.  All CN6XXX based chips with USB are
-          supported.
 
 config USB_OCTEON_OHCI
         bool "Octeon on-chip OHCI support"