3 files changed, 57 insertions, 67 deletions

diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 5d12d547789e..7836de35893c 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -947,6 +947,10 @@ static struct clk fast_clk = {
         .lock       = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
 };
 
+/*
+ * The MMCI apb_pclk is hardwired to the same terminal as the
+ * external MCI clock. Thus this will be referenced twice.
+ */
 static struct clk mmcsd_clk = {
         .name       = "MCLK",
         .parent     = &fast_clk,
@@ -1024,6 +1028,10 @@ static struct clk i2c1_clk = {
         .lock       = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
 };
 
+/*
+ * The SPI apb_pclk is hardwired to the same terminal as the
+ * external SPI clock. Thus this will be referenced twice.
+ */
 static struct clk spi_clk = {
         .name       = "SPI",
         .parent     = &fast_clk,
@@ -1040,10 +1048,9 @@ static struct clk spi_clk = {
 };
 
 #ifdef CONFIG_MACH_U300_BS335
-static struct clk uart1_clk = {
-        .name       = "UART1",
+static struct clk uart1_pclk = {
+        .name       = "UART1_PCLK",
         .parent     = &fast_clk,
-        .rate       = 13000000,
         .hw_ctrld   = false,
         .reset      = true,
         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
@@ -1051,6 +1058,14 @@ static struct clk uart1_clk = {
         .clk_val    = U300_SYSCON_SBCER_UART1_CLK_EN,
         .enable     = syscon_clk_enable,
         .disable    = syscon_clk_disable,
+        .lock       = __SPIN_LOCK_UNLOCKED(uart1_pclk.lock),
+};
+
+/* This one is hardwired to PLL13 */
+static struct clk uart1_clk = {
+        .name       = "UART1_CLK",
+        .rate       = 13000000,
+        .hw_ctrld   = true,
         .lock       = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
 };
 #endif
@@ -1085,11 +1100,9 @@ static struct clk wdog_clk = {
         .lock       = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
 };
 
-/* This one is hardwired to PLL13 */
-static struct clk uart_clk = {
-        .name       = "UARTCLK",
+static struct clk uart0_pclk = {
+        .name       = "UART0_PCLK",
         .parent     = &slow_clk,
-        .rate       = 13000000,
         .hw_ctrld   = false,
         .reset      = true,
         .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
@@ -1097,7 +1110,16 @@ static struct clk uart_clk = {
         .clk_val    = U300_SYSCON_SBCER_UART_CLK_EN,
         .enable     = syscon_clk_enable,
         .disable    = syscon_clk_disable,
-        .lock       = __SPIN_LOCK_UNLOCKED(uart_clk.lock),
+        .lock       = __SPIN_LOCK_UNLOCKED(uart0_pclk.lock),
+};
+
+/* This one is hardwired to PLL13 */
+static struct clk uart0_clk = {
+        .name       = "UART0_CLK",
+        .parent     = &slow_clk,
+        .rate       = 13000000,
+        .hw_ctrld   = true,
+        .lock       = __SPIN_LOCK_UNLOCKED(uart0_clk.lock),
 };
 
 static struct clk keypad_clk = {
@@ -1212,23 +1234,24 @@ static struct clk ppm_clk = {
 };
 #endif
 
-static struct clk dummy_apb_pclk;
-
 #define DEF_LOOKUP(devid, clkref)               \
         {                                       \
         .dev_id = devid,                        \
         .clk = clkref,                          \
         }
 
+#define DEF_LOOKUP_CON(devid, conid, clkref)    \
+        {                                       \
+        .dev_id = devid,                        \
+        .con_id = conid,                        \
+        .clk = clkref,                          \
+        }
+
 /*
  * Here we only define clocks that are meaningful to
  * look up through clockdevice.
  */
 static struct clk_lookup lookups[] = {
-        {
-                .con_id = "apb_pclk",
-                .clk = &dummy_apb_pclk,
-        },
         /* Connected directly to the AMBA bus */
         DEF_LOOKUP("amba",      &amba_clk),
         DEF_LOOKUP("cpu",       &cpu_clk),
@@ -1247,11 +1270,14 @@ static struct clk_lookup lookups[] = {
         /* AHB bridge clocks */
         DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
         DEF_LOOKUP("intcon",    &intcon_clk),
+        DEF_LOOKUP_CON("intcon", "apb_pclk", &intcon_clk),
         DEF_LOOKUP("mspro",     &mspro_clk),
         DEF_LOOKUP("pl172",     &emif_clk),
+        DEF_LOOKUP_CON("pl172", "apb_pclk", &emif_clk),
         /* FAST bridge clocks */
         DEF_LOOKUP("fast",      &fast_clk),
         DEF_LOOKUP("mmci",      &mmcsd_clk),
+        DEF_LOOKUP_CON("mmci", "apb_pclk", &mmcsd_clk),
         /*
          * The .0 and .1 identifiers on these comes from the platform device
          * .id field and are assigned when the platform devices are registered.
@@ -1261,13 +1287,16 @@ static struct clk_lookup lookups[] = {
         DEF_LOOKUP("stu300.0",  &i2c0_clk),
         DEF_LOOKUP("stu300.1",  &i2c1_clk),
         DEF_LOOKUP("pl022",     &spi_clk),
+        DEF_LOOKUP_CON("pl022", "apb_pclk", &spi_clk),
 #ifdef CONFIG_MACH_U300_BS335
         DEF_LOOKUP("uart1",     &uart1_clk),
+        DEF_LOOKUP_CON("uart1", "apb_pclk", &uart1_pclk),
 #endif
         /* SLOW bridge clocks */
         DEF_LOOKUP("slow",      &slow_clk),
         DEF_LOOKUP("coh901327_wdog",      &wdog_clk),
-        DEF_LOOKUP("uart0",     &uart_clk),
+        DEF_LOOKUP("uart0",     &uart0_clk),
+        DEF_LOOKUP_CON("uart0", "apb_pclk", &uart0_pclk),
         DEF_LOOKUP("apptimer",  &app_timer_clk),
         DEF_LOOKUP("coh901461-keypad",    &keypad_clk),
         DEF_LOOKUP("u300-gpio", &gpio_clk),
@@ -1287,46 +1316,6 @@ static void __init clk_register(void)
 }
 
 /*
- * These are the clocks for cells registered as primecell drivers
- * on the AMBA bus. These must be on during AMBA device registration
- * since the bus probe will attempt to read magic configuration
- * registers for these devices. If they are deactivated these probes
- * will fail.
- *
- *
- * Please note that on emif, both RAM and NAND is connected in dual
- * RAM phones. On single RAM phones, ram is on semi and NAND on emif.
- *
- */
-void u300_clock_primecells(void)
-{
-        clk_enable(&intcon_clk);
-        clk_enable(&uart_clk);
-#ifdef CONFIG_MACH_U300_BS335
-        clk_enable(&uart1_clk);
-#endif
-        clk_enable(&spi_clk);
-
-        clk_enable(&mmcsd_clk);
-
-}
-EXPORT_SYMBOL(u300_clock_primecells);
-
-void u300_unclock_primecells(void)
-{
-
-        clk_disable(&intcon_clk);
-        clk_disable(&uart_clk);
-#ifdef CONFIG_MACH_U300_BS335
-        clk_disable(&uart1_clk);
-#endif
-        clk_disable(&spi_clk);
-        clk_disable(&mmcsd_clk);
-
-}
-EXPORT_SYMBOL(u300_unclock_primecells);
-
-/*
  * The interrupt controller is enabled before the clock API is registered.
  */
 void u300_enable_intcon_clock(void)
@@ -1344,6 +1333,7 @@ void u300_enable_timer_clock(void)
 }
 EXPORT_SYMBOL(u300_enable_timer_clock);
 
+
 #if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
 /*
  * The following makes it possible to view the status (especially
@@ -1385,11 +1375,13 @@ static struct clk *clks[] = {
         &spi_clk,
 #ifdef CONFIG_MACH_U300_BS335
         &uart1_clk,
+        &uart1_pclk,
 #endif
         /* SLOW bridge clocks */
         &slow_clk,
         &wdog_clk,
-        &uart_clk,
+        &uart0_clk,
+        &uart0_pclk,
         &app_timer_clk,
         &keypad_clk,
         &gpio_clk,
@@ -1430,7 +1422,7 @@ static int u300_clocks_show(struct seq_file *s, void *data)
                                 chars++;
                         }
                         cdp[32] = '\0';
-                        if (clk->get_rate)
+                        if (clk->get_rate || clk->rate != 0)
                                 seq_printf(s,
                                            "%s%s\t%s\t%d\t%s\t%lu Hz\n",
                                            &cdp[0],
@@ -1439,7 +1431,7 @@ static int u300_clocks_show(struct seq_file *s, void *data)
                                            clk->usecount ? "ON" : "OFF",
                                            clk->usecount,
                                            clk->hw_ctrld  ? "YES" : "NO ",
-                                           clk->get_rate(clk));
+                                           clk_get_rate(clk));
                         else
                                 seq_printf(s,
                                            "%s%s\t%s\t%d\t%s\t" \
@@ -1483,7 +1475,7 @@ static int __init init_clk_read_debugfs(void)
 module_init(init_clk_read_debugfs);
 #endif
 
-static int __init u300_clock_init(void)
+int __init u300_clock_init(void)
 {
         u16 val;
 
@@ -1520,10 +1512,8 @@ static int __init u300_clock_init(void)
          */
         syscon_block_reset_disable(&semi_clk);
         syscon_block_reset_disable(&emif_clk);
-        semi_clk.enable(&semi_clk);
-        emif_clk.enable(&emif_clk);
+        clk_enable(&semi_clk);
+        clk_enable(&emif_clk);
 
         return 0;
 }
-/* initialize clocking early to be available later in the boot */
-core_initcall(u300_clock_init);
diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h
index fc6d9ccfe7e3..fc40c326566f 100644
--- a/arch/arm/mach-u300/clock.h
+++ b/arch/arm/mach-u300/clock.h
@@ -45,9 +45,8 @@ struct clk {
         void (*disable) (struct clk *);
 };
 
-void u300_clock_primecells(void);
-void u300_unclock_primecells(void);
 void u300_enable_intcon_clock(void);
 void u300_enable_timer_clock(void);
+int u300_clock_init(void);
 
 #endif
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 653b3e0ab7ba..b18976370824 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1479,6 +1479,9 @@ void __init u300_init_irq(void)
         u32 mask[2] = {0, 0};
         int i;
 
+        /* initialize clocking early, we want to clock the INTCON */
+        u300_clock_init();
+
         for (i = 0; i < NR_IRQS; i++)
                 set_bit(i, (unsigned long *) &mask[0]);
         u300_enable_intcon_clock();
@@ -1635,12 +1638,10 @@ void __init u300_init_devices(void)
         u300_spi_init(&pl022_device);
 
         /* Register the AMBA devices in the AMBA bus abstraction layer */
-        u300_clock_primecells();
         for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
                 struct amba_device *d = amba_devs[i];
                 amba_device_register(d, &iomem_resource);
         }
-        u300_unclock_primecells();
 
         u300_assign_physmem();