4 files changed, 480 insertions, 0 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 26a36f887357..2aea25ba7ba0 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -329,6 +329,16 @@ config MFD_88PM8607
           individual components like voltage regulators, RTC and
           battery-charger under the corresponding menus.
 
+config AB4500_CORE
+        tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
+        depends on SPI
+        default y
+        help
+          Select this option to enable access to AB4500 power management
+          chip. This connects to U8500 on the SSP/SPI bus and exports
+          read/write functions for the devices to get access to this chip.
+          This chip embeds various other multimedia funtionalities as well.
+
 endmenu
 
 menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2596add427a2..1792b1ff8ffc 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -52,4 +52,5 @@ obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
 obj-$(CONFIG_PCF50633_GPIO)     += pcf50633-gpio.o
 obj-$(CONFIG_AB3100_CORE)       += ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)        += ab3100-otp.o
+obj-$(CONFIG_AB4500_CORE)       += ab4500-core.o
 obj-$(CONFIG_MFD_88PM8607)      += 88pm8607.o
diff --git a/drivers/mfd/ab4500-core.c b/drivers/mfd/ab4500-core.c
new file mode 100644
index 000000000000..3ad91f7ee22b
--- /dev/null
+++ b/drivers/mfd/ab4500-core.c
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation.
+ *
+ * AB4500 is a companion power management chip used with U8500.
+ * On this platform, this is interfaced with SSP0 controller
+ * which is a ARM primecell pl022.
+ *
+ * At the moment the module just exports read/write features.
+ * Interrupt management to be added - TODO.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/ab4500.h>
+
+/* just required if probe fails, we need to
+ * unregister the device
+ */
+static struct spi_driver ab4500_driver;
+
+/*
+ * This funtion writes to any AB4500 registers using
+ * SPI protocol &  before it writes it packs the data
+ * in the below 24 bit frame format
+ *
+ *       *|------------------------------------|
+ *       *| 23|22...18|17.......10|9|8|7......0|
+ *       *| r/w  bank       adr          data  |
+ *       * ------------------------------------
+ *
+ * This function shouldn't be called from interrupt
+ * context
+ */
+int ab4500_write(struct ab4500 *ab4500, unsigned char block,
+                unsigned long addr, unsigned char data)
+{
+        struct spi_transfer xfer;
+        struct spi_message      msg;
+        int err;
+        unsigned long spi_data =
+                block << 18 | addr << 10 | data;
+
+        mutex_lock(&ab4500->lock);
+        ab4500->tx_buf[0] = spi_data;
+        ab4500->rx_buf[0] = 0;
+
+        xfer.tx_buf     = ab4500->tx_buf;
+        xfer.rx_buf     = NULL;
+        xfer.len        = sizeof(unsigned long);
+
+        spi_message_init(&msg);
+        spi_message_add_tail(&xfer, &msg);
+
+        err = spi_sync(ab4500->spi, &msg);
+        mutex_unlock(&ab4500->lock);
+
+        return err;
+}
+EXPORT_SYMBOL(ab4500_write);
+
+int ab4500_read(struct ab4500 *ab4500, unsigned char block,
+                unsigned long addr)
+{
+        struct spi_transfer xfer;
+        struct spi_message      msg;
+        unsigned long spi_data =
+                1 << 23 | block << 18 | addr << 10;
+
+        mutex_lock(&ab4500->lock);
+        ab4500->tx_buf[0] = spi_data;
+        ab4500->rx_buf[0] = 0;
+
+        xfer.tx_buf     = ab4500->tx_buf;
+        xfer.rx_buf     = ab4500->rx_buf;
+        xfer.len        = sizeof(unsigned long);
+
+        spi_message_init(&msg);
+        spi_message_add_tail(&xfer, &msg);
+
+        spi_sync(ab4500->spi, &msg);
+        mutex_unlock(&ab4500->lock);
+
+        return  ab4500->rx_buf[0];
+}
+EXPORT_SYMBOL(ab4500_read);
+
+/* ref: ab3100 core */
+#define AB4500_DEVICE(devname, devid)                           \
+static struct platform_device ab4500_##devname##_device = {     \
+        .name   = devid,                                        \
+        .id     = -1,                                           \
+}
+
+/* list of childern devices of ab4500 - all are
+ * not populated here - TODO
+ */
+AB4500_DEVICE(charger, "ab4500-charger");
+AB4500_DEVICE(audio, "ab4500-audio");
+AB4500_DEVICE(usb, "ab4500-usb");
+AB4500_DEVICE(tvout, "ab4500-tvout");
+AB4500_DEVICE(sim, "ab4500-sim");
+AB4500_DEVICE(gpadc, "ab4500-gpadc");
+AB4500_DEVICE(clkmgt, "ab4500-clkmgt");
+AB4500_DEVICE(misc, "ab4500-misc");
+
+static struct platform_device *ab4500_platform_devs[] = {
+        &ab4500_charger_device,
+        &ab4500_audio_device,
+        &ab4500_usb_device,
+        &ab4500_tvout_device,
+        &ab4500_sim_device,
+        &ab4500_gpadc_device,
+        &ab4500_clkmgt_device,
+        &ab4500_misc_device,
+};
+
+static int __init ab4500_probe(struct spi_device *spi)
+{
+        struct ab4500   *ab4500;
+        unsigned char revision;
+        int err = 0;
+        int i;
+
+        ab4500 = kzalloc(sizeof *ab4500, GFP_KERNEL);
+        if (!ab4500) {
+                dev_err(&spi->dev, "could not allocate AB4500\n");
+                err = -ENOMEM;
+                goto not_detect;
+        }
+
+        ab4500->spi = spi;
+        spi_set_drvdata(spi, ab4500);
+
+        mutex_init(&ab4500->lock);
+
+        /* read the revision register */
+        revision = ab4500_read(ab4500, AB4500_MISC, AB4500_REV_REG);
+
+        /* revision id 0x0 is for early drop, 0x10 is for cut1.0 */
+        if (revision == 0x0 || revision == 0x10)
+                dev_info(&spi->dev, "Detected chip: %s, revision = %x\n",
+                        ab4500_driver.driver.name, revision);
+        else    {
+                dev_err(&spi->dev, "unknown chip: 0x%x\n", revision);
+                goto not_detect;
+        }
+
+        for (i = 0; i < ARRAY_SIZE(ab4500_platform_devs); i++)  {
+                ab4500_platform_devs[i]->dev.parent =
+                        &spi->dev;
+                platform_set_drvdata(ab4500_platform_devs[i], ab4500);
+        }
+
+        /* register the ab4500 platform devices */
+        platform_add_devices(ab4500_platform_devs,
+                        ARRAY_SIZE(ab4500_platform_devs));
+
+        return err;
+
+ not_detect:
+        spi_unregister_driver(&ab4500_driver);
+        kfree(ab4500);
+        return err;
+}
+
+static int __devexit ab4500_remove(struct spi_device *spi)
+{
+        struct ab4500 *ab4500 =
+                spi_get_drvdata(spi);
+
+        kfree(ab4500);
+
+        return 0;
+}
+
+static struct spi_driver ab4500_driver = {
+        .driver = {
+                .name = "ab4500",
+                .owner = THIS_MODULE,
+        },
+        .probe = ab4500_probe,
+        .remove = __devexit_p(ab4500_remove)
+};
+
+static int __devinit ab4500_init(void)
+{
+        return spi_register_driver(&ab4500_driver);
+}
+
+static void __exit ab4500_exit(void)
+{
+        spi_unregister_driver(&ab4500_driver);
+}
+
+subsys_initcall_sync(ab4500_init);
+
+MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com");
+MODULE_DESCRIPTION("AB4500 core driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/ab4500.h b/include/linux/mfd/ab4500.h
new file mode 100644
index 000000000000..a42a7033ae53
--- /dev/null
+++ b/include/linux/mfd/ab4500.h
@@ -0,0 +1,262 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * AB4500 device core funtions, for client access
+ */
+#ifndef MFD_AB4500_H
+#define MFD_AB4500_H
+
+#include <linux/device.h>
+
+/*
+ * AB4500 bank addresses
+ */
+#define AB4500_SYS_CTRL1_BLOCK  0x1
+#define AB4500_SYS_CTRL2_BLOCK  0x2
+#define AB4500_REGU_CTRL1       0x3
+#define AB4500_REGU_CTRL2       0x4
+#define AB4500_USB              0x5
+#define AB4500_TVOUT            0x6
+#define AB4500_DBI              0x7
+#define AB4500_ECI_AV_ACC       0x8
+#define AB4500_RESERVED         0x9
+#define AB4500_GPADC            0xA
+#define AB4500_CHARGER          0xB
+#define AB4500_GAS_GAUGE        0xC
+#define AB4500_AUDIO            0xD
+#define AB4500_INTERRUPT        0xE
+#define AB4500_RTC              0xF
+#define AB4500_MISC             0x10
+#define AB4500_DEBUG            0x12
+#define AB4500_PROD_TEST        0x13
+#define AB4500_OTP_EMUL         0x15
+
+/*
+ * System control 1 register offsets.
+ * Bank = 0x01
+ */
+#define AB4500_TURNON_STAT_REG          0x0100
+#define AB4500_RESET_STAT_REG           0x0101
+#define AB4500_PONKEY1_PRESS_STAT_REG   0x0102
+
+#define AB4500_FSM_STAT1_REG            0x0140
+#define AB4500_FSM_STAT2_REG            0x0141
+#define AB4500_SYSCLK_REQ_STAT_REG      0x0142
+#define AB4500_USB_STAT1_REG            0x0143
+#define AB4500_USB_STAT2_REG            0x0144
+#define AB4500_STATUS_SPARE1_REG        0x0145
+#define AB4500_STATUS_SPARE2_REG        0x0146
+
+#define AB4500_CTRL1_REG                0x0180
+#define AB4500_CTRL2_REG                0x0181
+
+/*
+ * System control 2 register offsets.
+ * bank = 0x02
+ */
+#define AB4500_CTRL3_REG                0x0200
+#define AB4500_MAIN_WDOG_CTRL_REG       0x0201
+#define AB4500_MAIN_WDOG_TIMER_REG      0x0202
+#define AB4500_LOW_BAT_REG              0x0203
+#define AB4500_BATT_OK_REG              0x0204
+#define AB4500_SYSCLK_TIMER_REG         0x0205
+#define AB4500_SMPSCLK_CTRL_REG         0x0206
+#define AB4500_SMPSCLK_SEL1_REG         0x0207
+#define AB4500_SMPSCLK_SEL2_REG         0x0208
+#define AB4500_SMPSCLK_SEL3_REG         0x0209
+#define AB4500_SYSULPCLK_CONF_REG       0x020A
+#define AB4500_SYSULPCLK_CTRL1_REG      0x020B
+#define AB4500_SYSCLK_CTRL_REG          0x020C
+#define AB4500_SYSCLK_REQ1_VALID_REG    0x020D
+#define AB4500_SYSCLK_REQ_VALID_REG     0x020E
+#define AB4500_SYSCTRL_SPARE_REG        0x020F
+#define AB4500_PAD_CONF_REG             0x0210
+
+/*
+ * Regu control1 register offsets
+ * Bank = 0x03
+ */
+#define AB4500_REGU_SERIAL_CTRL1_REG    0x0300
+#define AB4500_REGU_SERIAL_CTRL2_REG    0x0301
+#define AB4500_REGU_SERIAL_CTRL3_REG    0x0302
+#define AB4500_REGU_REQ_CTRL1_REG       0x0303
+#define AB4500_REGU_REQ_CTRL2_REG       0x0304
+#define AB4500_REGU_REQ_CTRL3_REG       0x0305
+#define AB4500_REGU_REQ_CTRL4_REG       0x0306
+#define AB4500_REGU_MISC1_REG           0x0380
+#define AB4500_REGU_OTGSUPPLY_CTRL_REG  0x0381
+#define AB4500_REGU_VUSB_CTRL_REG       0x0382
+#define AB4500_REGU_VAUDIO_SUPPLY_REG   0x0383
+#define AB4500_REGU_CTRL1_SPARE_REG     0x0384
+
+/*
+ * Regu control2 Vmod register offsets
+ */
+#define AB4500_REGU_VMOD_REGU_REG       0x0440
+#define AB4500_REGU_VMOD_SEL1_REG       0x0441
+#define AB4500_REGU_VMOD_SEL2_REG       0x0442
+#define AB4500_REGU_CTRL_DISCH_REG      0x0443
+#define AB4500_REGU_CTRL_DISCH2_REG     0x0444
+
+/*
+ * USB/ULPI register offsets
+ * Bank : 0x5
+ */
+#define AB4500_USB_LINE_STAT_REG        0x0580
+#define AB4500_USB_LINE_CTRL1_REG       0x0581
+#define AB4500_USB_LINE_CTRL2_REG       0x0582
+#define AB4500_USB_LINE_CTRL3_REG       0x0583
+#define AB4500_USB_LINE_CTRL4_REG       0x0584
+#define AB4500_USB_LINE_CTRL5_REG       0x0585
+#define AB4500_USB_OTG_CTRL_REG         0x0587
+#define AB4500_USB_OTG_STAT_REG         0x0588
+#define AB4500_USB_OTG_STAT_REG         0x0588
+#define AB4500_USB_CTRL_SPARE_REG       0x0589
+#define AB4500_USB_PHY_CTRL_REG         0x058A
+
+/*
+ * TVOUT / CTRL register offsets
+ * Bank : 0x06
+ */
+#define AB4500_TVOUT_CTRL_REG           0x0680
+
+/*
+ * DBI register offsets
+ * Bank : 0x07
+ */
+#define AB4500_DBI_REG1_REG             0x0700
+#define AB4500_DBI_REG2_REG             0x0701
+
+/*
+ * ECI regsiter offsets
+ * Bank : 0x08
+ */
+#define AB4500_ECI_CTRL_REG             0x0800
+#define AB4500_ECI_HOOKLEVEL_REG        0x0801
+#define AB4500_ECI_DATAOUT_REG          0x0802
+#define AB4500_ECI_DATAIN_REG           0x0803
+
+/*
+ * AV Connector register offsets
+ * Bank : 0x08
+ */
+#define AB4500_AV_CONN_REG              0x0840
+
+/*
+ * Accessory detection register offsets
+ * Bank : 0x08
+ */
+#define AB4500_ACC_DET_DB1_REG          0x0880
+#define AB4500_ACC_DET_DB2_REG          0x0881
+
+/*
+ * GPADC register offsets
+ * Bank : 0x0A
+ */
+#define AB4500_GPADC_CTRL1_REG          0x0A00
+#define AB4500_GPADC_CTRL2_REG          0x0A01
+#define AB4500_GPADC_CTRL3_REG          0x0A02
+#define AB4500_GPADC_AUTO_TIMER_REG     0x0A03
+#define AB4500_GPADC_STAT_REG           0x0A04
+#define AB4500_GPADC_MANDATAL_REG       0x0A05
+#define AB4500_GPADC_MANDATAH_REG       0x0A06
+#define AB4500_GPADC_AUTODATAL_REG      0x0A07
+#define AB4500_GPADC_AUTODATAH_REG      0x0A08
+#define AB4500_GPADC_MUX_CTRL_REG       0x0A09
+
+/*
+ * Charger / status register offfsets
+ * Bank : 0x0B
+ */
+#define AB4500_CH_STATUS1_REG           0x0B00
+#define AB4500_CH_STATUS2_REG           0x0B01
+#define AB4500_CH_USBCH_STAT1_REG       0x0B02
+#define AB4500_CH_USBCH_STAT2_REG       0x0B03
+#define AB4500_CH_FSM_STAT_REG          0x0B04
+#define AB4500_CH_STAT_REG              0x0B05
+
+/*
+ * Charger / control register offfsets
+ * Bank : 0x0B
+ */
+#define AB4500_CH_VOLT_LVL_REG          0x0B40
+
+/*
+ * Charger / main control register offfsets
+ * Bank : 0x0B
+ */
+#define AB4500_MCH_CTRL1                0x0B80
+#define AB4500_MCH_CTRL2                0x0B81
+#define AB4500_MCH_IPT_CURLVL_REG       0x0B82
+#define AB4500_CH_WD_REG                0x0B83
+
+/*
+ * Charger / USB control register offsets
+ * Bank : 0x0B
+ */
+#define AB4500_USBCH_CTRL1_REG          0x0BC0
+#define AB4500_USBCH_CTRL2_REG          0x0BC1
+#define AB4500_USBCH_IPT_CRNTLVL_REG    0x0BC2
+
+/*
+ * RTC bank register offsets
+ * Bank : 0xF
+ */
+#define AB4500_RTC_SOFF_STAT_REG        0x0F00
+#define AB4500_RTC_CC_CONF_REG          0x0F01
+#define AB4500_RTC_READ_REQ_REG         0x0F02
+#define AB4500_RTC_WATCH_TSECMID_REG    0x0F03
+#define AB4500_RTC_WATCH_TSECHI_REG     0x0F04
+#define AB4500_RTC_WATCH_TMIN_LOW_REG   0x0F05
+#define AB4500_RTC_WATCH_TMIN_MID_REG   0x0F06
+#define AB4500_RTC_WATCH_TMIN_HI_REG    0x0F07
+#define AB4500_RTC_ALRM_MIN_LOW_REG     0x0F08
+#define AB4500_RTC_ALRM_MIN_MID_REG     0x0F09
+#define AB4500_RTC_ALRM_MIN_HI_REG      0x0F0A
+#define AB4500_RTC_STAT_REG             0x0F0B
+#define AB4500_RTC_BKUP_CHG_REG         0x0F0C
+#define AB4500_RTC_FORCE_BKUP_REG       0x0F0D
+#define AB4500_RTC_CALIB_REG            0x0F0E
+#define AB4500_RTC_SWITCH_STAT_REG      0x0F0F
+
+/*
+ * PWM Out generators
+ * Bank: 0x10
+ */
+#define AB4500_PWM_OUT_CTRL1_REG        0x1060
+#define AB4500_PWM_OUT_CTRL2_REG        0x1061
+#define AB4500_PWM_OUT_CTRL3_REG        0x1062
+#define AB4500_PWM_OUT_CTRL4_REG        0x1063
+#define AB4500_PWM_OUT_CTRL5_REG        0x1064
+#define AB4500_PWM_OUT_CTRL6_REG        0x1065
+#define AB4500_PWM_OUT_CTRL7_REG        0x1066
+
+#define AB4500_I2C_PAD_CTRL_REG         0x1067
+#define AB4500_REV_REG                  0x1080
+
+/**
+ * struct ab4500
+ * @spi: spi device structure
+ * @tx_buf: transmit buffer
+ * @rx_buf: receive buffer
+ * @lock: sync primitive
+ */
+struct ab4500 {
+        struct spi_device       *spi;
+        unsigned long           tx_buf[4];
+        unsigned long           rx_buf[4];
+        struct mutex            lock;
+};
+
+int ab4500_write(struct ab4500 *ab4500, unsigned char block,
+                unsigned long addr, unsigned char data);
+int ab4500_read(struct ab4500 *ab4500, unsigned char block,
+                unsigned long addr);
+
+#endif /* MFD_AB4500_H */