22 files changed, 78 insertions, 81 deletions

diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
index ad4679b90870..686d8d2dbb24 100644
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@@ -232,25 +232,25 @@ static struct mxc_gpio_port imx_gpio_ports[] = {
                 .chip.label = "gpio-0",
                 .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
                 .irq = GPIO_INT_PORTA,
-                .virtual_irq_start = MXC_MAX_INT_LINES
+                .virtual_irq_start = MXC_GPIO_IRQ_START
         },
         [1] = {
                 .chip.label = "gpio-1",
                 .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
                 .irq = GPIO_INT_PORTB,
-                .virtual_irq_start = MXC_MAX_INT_LINES + 32
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 32
         },
         [2] = {
                 .chip.label = "gpio-2",
                 .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
                 .irq = GPIO_INT_PORTC,
-                .virtual_irq_start = MXC_MAX_INT_LINES + 64
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 64
         },
         [3] = {
                 .chip.label = "gpio-3",
                 .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
                 .irq = GPIO_INT_PORTD,
-                .virtual_irq_start = MXC_MAX_INT_LINES + 96
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 96
         }
 };
 
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 0bad86527743..af121f5ab710 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -230,32 +230,32 @@ static struct mxc_gpio_port imx_gpio_ports[] = {
                 .chip.label = "gpio-0",
                 .irq = MXC_INT_GPIO,
                 .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 0),
-                .virtual_irq_start = MXC_MAX_INT_LINES,
+                .virtual_irq_start = MXC_GPIO_IRQ_START,
         },
         [1] = {
                 .chip.label = "gpio-1",
                 .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 1),
-                .virtual_irq_start = MXC_MAX_INT_LINES + 32,
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
         },
         [2] = {
                 .chip.label = "gpio-2",
                 .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 2),
-                .virtual_irq_start = MXC_MAX_INT_LINES + 64,
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
         },
         [3] = {
                 .chip.label = "gpio-3",
                 .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 3),
-                .virtual_irq_start = MXC_MAX_INT_LINES + 96,
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
         },
         [4] = {
                 .chip.label = "gpio-4",
                 .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 4),
-                .virtual_irq_start = MXC_MAX_INT_LINES + 128,
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 128,
         },
         [5] = {
                 .chip.label = "gpio-5",
                 .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 5),
-                .virtual_irq_start = MXC_MAX_INT_LINES + 160,
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 160,
         }
 };
 
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index a06497674436..2b5c67f54571 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -93,7 +93,7 @@ static int uart_mxc_port1_init(struct platform_device *pdev)
 
 static int uart_mxc_port1_exit(struct platform_device *pdev)
 {
-        mxc_gpio_setup_release_pins(mxc_uart1_pins,
+        mxc_gpio_release_multiple_pins(mxc_uart1_pins,
                         ARRAY_SIZE(mxc_uart1_pins));
         return 0;
 }
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 9f14a871ee7c..b1746aae1f89 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -24,6 +24,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <mach/clock.h>
+#include <mach/hardware.h>
 #include <asm/div64.h>
 
 #include "crm_regs.h"
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 3e61ff4646fe..1d46cb4adf96 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -125,19 +125,19 @@ static struct mxc_gpio_port imx_gpio_ports[] = {
                 .chip.label = "gpio-0",
                 .base = IO_ADDRESS(GPIO1_BASE_ADDR),
                 .irq = MXC_INT_GPIO1,
-                .virtual_irq_start = MXC_GPIO_INT_BASE
+                .virtual_irq_start = MXC_GPIO_IRQ_START,
         },
         [1] = {
                 .chip.label = "gpio-1",
                 .base = IO_ADDRESS(GPIO2_BASE_ADDR),
                 .irq = MXC_INT_GPIO2,
-                .virtual_irq_start = MXC_GPIO_INT_BASE + GPIO_NUM_PIN
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
         },
         [2] = {
                 .chip.label = "gpio-2",
                 .base = IO_ADDRESS(GPIO3_BASE_ADDR),
                 .irq = MXC_INT_GPIO3,
-                .virtual_irq_start = MXC_GPIO_INT_BASE + GPIO_NUM_PIN * 2
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
         }
 };
 
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 16cb07cd9162..9cc2b16fdf79 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -8,6 +8,7 @@ choice
 
 config ARCH_MX1
         bool "MX1-based"
+        select CPU_ARM920T
         help
           This enables support for systems based on the Freescale i.MX1 family
 
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index e1c2eb497fbc..2905ec758758 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -511,6 +511,7 @@ void imx_dma_disable(int channel)
 }
 EXPORT_SYMBOL(imx_dma_disable);
 
+#ifdef CONFIG_ARCH_MX2
 static void imx_dma_watchdog(unsigned long chno)
 {
         struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
@@ -522,6 +523,7 @@ static void imx_dma_watchdog(unsigned long chno)
         if (imxdma->err_handler)
                 imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT);
 }
+#endif
 
 static irqreturn_t dma_err_handler(int irq, void *dev_id)
 {
@@ -674,7 +676,7 @@ int imx_dma_request(int channel, const char *name)
 {
         struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
         unsigned long flags;
-        int ret;
+        int ret = 0;
 
         /* basic sanity checks */
         if (!name)
@@ -696,6 +698,7 @@ int imx_dma_request(int channel, const char *name)
         ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
                         NULL);
         if (ret) {
+                local_irq_restore(flags);
                 printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
                                 MXC_INT_DMACH0 + channel, channel);
                 return ret;
@@ -712,7 +715,7 @@ int imx_dma_request(int channel, const char *name)
         imxdma->sg = NULL;
 
         local_irq_restore(flags);
-        return 0;
+        return ret;
 }
 EXPORT_SYMBOL(imx_dma_request);
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index 0c748a8e157b..8f34a05afc87 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -15,7 +15,7 @@
 #define __ASM_ARCH_MXC_BOARD_MX27ADS_H__
 
 /* external interrupt multiplexer */
-#define MXC_EXP_IO_BASE         (MXC_GPIO_BASE + MXC_MAX_GPIO_LINES)
+#define MXC_EXP_IO_BASE         (MXC_BOARD_IRQ_START)
 
 #define MXC_VIRTUAL_INTS_BASE   (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES)
 #define MXC_SDIO1_CARD_IRQ      MXC_VIRTUAL_INTS_BASE
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 745b48864f93..451d510d08c3 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -90,7 +90,7 @@
 #define PBC_INTMASK_CLEAR_REG   (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
 #define EXPIO_PARENT_INT        IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
 
-#define MXC_EXP_IO_BASE         (MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES)
+#define MXC_EXP_IO_BASE         (MXC_BOARD_IRQ_START)
 #define MXC_IRQ_TO_EXPIO(irq)   ((irq) - MXC_EXP_IO_BASE)
 
 #define EXPIO_INT_LOW_BAT       (MXC_EXP_IO_BASE + 0)
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 11632028f7d1..5f01d60da845 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -9,6 +9,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <mach/hardware.h>
+
 #define AVIC_NIMASK     0x04
 
         @ this macro disables fast irq (not implemented)
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index 65eedc0d196f..ea509f1090fb 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -27,8 +27,8 @@
 #define gpio_set_value          __gpio_set_value
 #define gpio_cansleep           __gpio_cansleep
 
-#define gpio_to_irq(gpio)       (MXC_MAX_INT_LINES + (gpio))
-#define irq_to_gpio(irq)        ((irq) - MXC_MAX_INT_LINES)
+#define gpio_to_irq(gpio)       (MXC_GPIO_IRQ_START + (gpio))
+#define irq_to_gpio(irq)        ((irq) - MXC_GPIO_IRQ_START)
 
 struct mxc_gpio_port {
         void __iomem *base;
diff --git a/arch/arm/plat-mxc/include/mach/io.h b/arch/arm/plat-mxc/include/mach/io.h
index c0cb267e7403..b4f2de769466 100644
--- a/arch/arm/plat-mxc/include/mach/io.h
+++ b/arch/arm/plat-mxc/include/mach/io.h
@@ -25,8 +25,8 @@ __mx3_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
                 /* Access all peripherals below 0x80000000 as nonshared device
                  * but leave l2cc alone.
                  */
-                if ((phys_addr < 0x80000000) && ((phys_addr < L2CC_BASE_ADDR) ||
-                        (phys_addr >= L2CC_BASE_ADDR + L2CC_SIZE)))
+                if ((phys_addr < 0x80000000) && ((phys_addr < 0x30000000) ||
+                        (phys_addr >= 0x30000000 + SZ_1M)))
                         mtype = MT_DEVICE_NONSHARED;
         }
 
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
index 60b3c9b6ef7d..95a383be628e 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
@@ -405,9 +405,9 @@ extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
 #endif
 
 /* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - MXC_MAX_INT_LINES) >> 5)
+#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
 
-#define IRQ_GPIOA(x)  (MXC_MAX_INT_LINES + x)
+#define IRQ_GPIOA(x)  (MXC_GPIO_IRQ_START + x)
 #define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
 #define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
 #define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 20e5c4c63314..c9198c0aea18 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -141,7 +141,7 @@ void mxc_iomux_set_gpr(enum iomux_gp_func, bool);
         ((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT)
 #define IOMUX_TO_IRQ(iomux_pin) \
         (((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \
-        MXC_GPIO_INT_BASE)
+        MXC_GPIO_IRQ_START)
 
 /*
  * This enumeration is constructed based on the Section
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index b8ac91608a4f..e06d3cb0ee11 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -11,7 +11,32 @@
 #ifndef __ASM_ARCH_MXC_IRQS_H__
 #define __ASM_ARCH_MXC_IRQS_H__
 
-#include <mach/hardware.h>
+/*
+ * So far all i.MX SoCs have 64 internal interrupts
+ */
+#define MXC_INTERNAL_IRQS       64
+
+#define MXC_GPIO_IRQ_START      MXC_INTERNAL_IRQS
+
+#if defined CONFIG_ARCH_MX1
+#define MXC_GPIO_IRQS           (32 * 4)
+#elif defined CONFIG_ARCH_MX2
+#define MXC_GPIO_IRQS           (32 * 6)
+#elif defined CONFIG_ARCH_MX3
+#define MXC_GPIO_IRQS           (32 * 3)
+#endif
+
+/*
+ * The next 16 interrupts are for board specific purposes.  Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.  If you need more, increase MXC_BOARD_IRQS, but keep it
+ * within sensible limits.
+ */
+#define MXC_BOARD_IRQ_START     (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
+#define MXC_BOARD_IRQS  16
+
+#define NR_IRQS         (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
+
 extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
 
 /* all normal IRQs can be FIQs */
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 203688e6164e..0b808399097f 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -11,6 +11,12 @@
 #ifndef __ASM_ARCH_MXC_MEMORY_H__
 #define __ASM_ARCH_MXC_MEMORY_H__
 
-#include <mach/hardware.h>
+#if defined CONFIG_ARCH_MX1
+#define PHYS_OFFSET             UL(0x08000000)
+#elif defined CONFIG_ARCH_MX2
+#define PHYS_OFFSET             UL(0xA0000000)
+#elif defined CONFIG_ARCH_MX3
+#define PHYS_OFFSET             UL(0x80000000)
+#endif
 
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index e7f6d00009a7..b92e02324d8e 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -19,13 +19,6 @@
 #include <mach/vmalloc.h>
 
 /*
- * defines the hardware clock tick rate
- */
-#define CLOCK_TICK_RATE 16000000
-
-#define PHYS_OFFSET     UL(0x08000000)
-
-/*
  * Memory map
  */
 #define IMX_IO_PHYS     0x00200000
@@ -145,10 +138,6 @@
 #define GPIO_INT_PORTD          62
 #define WDT_INT                 63
 
-#define MXC_MAX_INT_LINES       64
-
-#define NR_IRQS                 256
-
 /* gpio and gpio based interrupt handling */
 #define GPIO_DR                 0x1C
 #define GPIO_GDIR               0x00
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index aade46d90e73..0313be720552 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -289,16 +289,4 @@ extern int mx27_revision(void);
 /* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
 #define ARCH_NR_GPIOS           (192 + 16)
 
-/* OS clock tick rate */
-#define CLOCK_TICK_RATE         13300000
-
-/* Start of RAM */
-#define PHYS_OFFSET             SDRAM_BASE_ADDR
-
-/* max interrupt lines count */
-#define NR_IRQS                 256
-
-/* count of internal interrupt sources */
-#define MXC_MAX_INT_LINES       64
-
 #endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 0536f8917bc0..de026654b00e 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -15,11 +15,6 @@
 #error "Do not include directly."
 #endif
 
-/*!
- * defines the hardware clock tick rate
- */
-#define CLOCK_TICK_RATE         16625000
-
 /*
  * MX31 memory map:
  *
@@ -244,9 +239,6 @@
 #define PCMCIA_IO_ADDRESS(x) \
         (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
 
-/* Start of physical RAM - On many MX31 platforms, this is the first SDRAM bank (CSD0) */
-#define PHYS_OFFSET             CSD0_BASE_ADDR
-
 /*
  * Interrupt numbers
  */
@@ -315,23 +307,6 @@
 #define MXC_INT_EXT_WDOG        62
 #define MXC_INT_EXT_TV          63
 
-#define MXC_MAX_INT_LINES       64
-
-#define MXC_GPIO_INT_BASE       MXC_MAX_INT_LINES
-#define MXC_MAX_GPIO_LINES      (GPIO_NUM_PIN * GPIO_PORT_NUM)
-#define MXC_MAX_VIRTUAL_INTS    16
-
-#define NR_IRQS (MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES + MXC_MAX_VIRTUAL_INTS)
-
-/*!
- * Number of GPIO port as defined in the IC Spec
- */
-#define GPIO_PORT_NUM           3
-/*!
- * Number of GPIO pins per port
- */
-#define GPIO_NUM_PIN            32
-
 #define PROD_SIGNATURE          0x1     /* For MX31 */
 
 /* silicon revisions specific to i.MX31 */
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 0b0af0253e91..07b4a73c9d2f 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -20,6 +20,12 @@
 #ifndef __ASM_ARCH_MXC_TIMEX_H__
 #define __ASM_ARCH_MXC_TIMEX_H__
 
-#include <mach/hardware.h>      /* for CLOCK_TICK_RATE */
+#if defined CONFIG_ARCH_MX1
+#define CLOCK_TICK_RATE         16000000
+#elif defined CONFIG_ARCH_MX2
+#define CLOCK_TICK_RATE         13300000
+#elif defined CONFIG_ARCH_MX3
+#define CLOCK_TICK_RATE         16625000
+#endif
 
 #endif                          /* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index e937c8759a97..6e7578a3514b 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <mach/common.h>
 #include <asm/mach/irq.h>
+#include <mach/hardware.h>
 
 #define AVIC_BASE               IO_ADDRESS(AVIC_BASE_ADDR)
 #define AVIC_INTCNTL            (AVIC_BASE + 0x00)      /* int control reg */
@@ -72,14 +73,14 @@ int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
 {
         unsigned int irqt;
 
-        if (irq >= MXC_MAX_INT_LINES)
+        if (irq >= MXC_INTERNAL_IRQS)
                 return -EINVAL;
 
-        if (irq < MXC_MAX_INT_LINES / 2) {
+        if (irq < MXC_INTERNAL_IRQS / 2) {
                 irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq);
                 __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL);
         } else {
-                irq -= MXC_MAX_INT_LINES / 2;
+                irq -= MXC_INTERNAL_IRQS / 2;
                 irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq);
                 __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH);
         }
@@ -129,7 +130,7 @@ void __init mxc_init_irq(void)
         /* all IRQ no FIQ */
         __raw_writel(0, AVIC_INTTYPEH);
         __raw_writel(0, AVIC_INTTYPEL);
-        for (i = 0; i < MXC_MAX_INT_LINES; i++) {
+        for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
                 set_irq_chip(i, &mxc_avic_chip);
                 set_irq_handler(i, handle_level_irq);
                 set_irq_flags(i, IRQF_VALID);
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 73dea88cceb3..a50954612b60 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -191,7 +191,7 @@
 #define SERIAL_IMX_MAJOR        207
 #define MINOR_START             16
 #define DEV_NAME                "ttymxc"
-#define MAX_INTERNAL_IRQ        MXC_MAX_INT_LINES
+#define MAX_INTERNAL_IRQ        MXC_INTERNAL_IRQS
 #endif
 
 /*