Merge branch 'mpi-master' into wip-k-fmlpwip-k-fmlp

Conflicts:
	litmus/sched_cedf.c

1 files changed, 387 insertions, 0 deletions

diff --git a/sound/soc/samsung/s3c24xx_simtec.c b/sound/soc/samsung/s3c24xx_simtec.c
new file mode 100644
index 000000000000..349566f0686b
--- /dev/null
+++ b/sound/soc/samsung/s3c24xx_simtec.c
@@ -0,0 +1,387 @@
+/* sound/soc/samsung/s3c24xx_simtec.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <linux/clk.h>
+
+#include <sound/soc.h>
+
+#include <plat/audio-simtec.h>
+
+#include "s3c24xx-i2s.h"
+#include "s3c24xx_simtec.h"
+
+static struct s3c24xx_audio_simtec_pdata *pdata;
+static struct clk *xtal_clk;
+
+static int spk_gain;
+static int spk_unmute;
+
+/**
+ * speaker_gain_get - read the speaker gain setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be updated.
+ *
+ * Read the value for the AMP gain control.
+ */
+static int speaker_gain_get(struct snd_kcontrol *kcontrol,
+                            struct snd_ctl_elem_value *ucontrol)
+{
+        ucontrol->value.integer.value[0] = spk_gain;
+        return 0;
+}
+
+/**
+ * speaker_gain_set - set the value of the speaker amp gain
+ * @value: The value to write.
+ */
+static void speaker_gain_set(int value)
+{
+        gpio_set_value_cansleep(pdata->amp_gain[0], value & 1);
+        gpio_set_value_cansleep(pdata->amp_gain[1], value >> 1);
+}
+
+/**
+ * speaker_gain_put - set the speaker gain setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be set.
+ *
+ * Set the value of the speaker gain from the specified
+ * @ucontrol setting.
+ *
+ * Note, if the speaker amp is muted, then we do not set a gain value
+ * as at-least one of the ICs that is fitted will try and power up even
+ * if the main control is set to off.
+ */
+static int speaker_gain_put(struct snd_kcontrol *kcontrol,
+                            struct snd_ctl_elem_value *ucontrol)
+{
+        int value = ucontrol->value.integer.value[0];
+
+        spk_gain = value;
+
+        if (!spk_unmute)
+                speaker_gain_set(value);
+
+        return 0;
+}
+
+static const struct snd_kcontrol_new amp_gain_controls[] = {
+        SOC_SINGLE_EXT("Speaker Gain", 0, 0, 3, 0,
+                       speaker_gain_get, speaker_gain_put),
+};
+
+/**
+ * spk_unmute_state - set the unmute state of the speaker
+ * @to: zero to unmute, non-zero to ununmute.
+ */
+static void spk_unmute_state(int to)
+{
+        pr_debug("%s: to=%d\n", __func__, to);
+
+        spk_unmute = to;
+        gpio_set_value(pdata->amp_gpio, to);
+
+        /* if we're umuting, also re-set the gain */
+        if (to && pdata->amp_gain[0] > 0)
+                speaker_gain_set(spk_gain);
+}
+
+/**
+ * speaker_unmute_get - read the speaker unmute setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be updated.
+ *
+ * Read the value for the AMP gain control.
+ */
+static int speaker_unmute_get(struct snd_kcontrol *kcontrol,
+                            struct snd_ctl_elem_value *ucontrol)
+{
+        ucontrol->value.integer.value[0] = spk_unmute;
+        return 0;
+}
+
+/**
+ * speaker_unmute_put - set the speaker unmute setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be set.
+ *
+ * Set the value of the speaker gain from the specified
+ * @ucontrol setting.
+ */
+static int speaker_unmute_put(struct snd_kcontrol *kcontrol,
+                            struct snd_ctl_elem_value *ucontrol)
+{
+        spk_unmute_state(ucontrol->value.integer.value[0]);
+        return 0;
+}
+
+/* This is added as a manual control as the speaker amps create clicks
+ * when their power state is changed, which are far more noticeable than
+ * anything produced by the CODEC itself.
+ */
+static const struct snd_kcontrol_new amp_unmute_controls[] = {
+        SOC_SINGLE_EXT("Speaker Switch", 0, 0, 1, 0,
+                       speaker_unmute_get, speaker_unmute_put),
+};
+
+void simtec_audio_init(struct snd_soc_pcm_runtime *rtd)
+{
+        struct snd_soc_codec *codec = rtd->codec;
+
+        if (pdata->amp_gpio > 0) {
+                pr_debug("%s: adding amp routes\n", __func__);
+
+                snd_soc_add_controls(codec, amp_unmute_controls,
+                                     ARRAY_SIZE(amp_unmute_controls));
+        }
+
+        if (pdata->amp_gain[0] > 0) {
+                pr_debug("%s: adding amp controls\n", __func__);
+                snd_soc_add_controls(codec, amp_gain_controls,
+                                     ARRAY_SIZE(amp_gain_controls));
+        }
+}
+EXPORT_SYMBOL_GPL(simtec_audio_init);
+
+#define CODEC_CLOCK 12000000
+
+/**
+ * simtec_hw_params - update hardware parameters
+ * @substream: The audio substream instance.
+ * @params: The parameters requested.
+ *
+ * Update the codec data routing and configuration  settings
+ * from the supplied data.
+ */
+static int simtec_hw_params(struct snd_pcm_substream *substream,
+                            struct snd_pcm_hw_params *params)
+{
+        struct snd_soc_pcm_runtime *rtd = substream->private_data;
+        struct snd_soc_dai *codec_dai = rtd->codec_dai;
+        struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+        int ret;
+
+        /* Set the CODEC as the bus clock master, I2S */
+        ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+                                  SND_SOC_DAIFMT_NB_NF |
+                                  SND_SOC_DAIFMT_CBM_CFM);
+        if (ret) {
+                pr_err("%s: failed set cpu dai format\n", __func__);
+                return ret;
+        }
+
+        /* Set the CODEC as the bus clock master */
+        ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+                                  SND_SOC_DAIFMT_NB_NF |
+                                  SND_SOC_DAIFMT_CBM_CFM);
+        if (ret) {
+                pr_err("%s: failed set codec dai format\n", __func__);
+                return ret;
+        }
+
+        ret = snd_soc_dai_set_sysclk(codec_dai, 0,
+                                     CODEC_CLOCK, SND_SOC_CLOCK_IN);
+        if (ret) {
+                pr_err( "%s: failed setting codec sysclk\n", __func__);
+                return ret;
+        }
+
+        if (pdata->use_mpllin) {
+                ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_MPLL,
+                                             0, SND_SOC_CLOCK_OUT);
+
+                if (ret) {
+                        pr_err("%s: failed to set MPLLin as clksrc\n",
+                               __func__);
+                        return ret;
+                }
+        }
+
+        if (pdata->output_cdclk) {
+                int cdclk_scale;
+
+                cdclk_scale = clk_get_rate(xtal_clk) / CODEC_CLOCK;
+                cdclk_scale--;
+
+                ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+                                             cdclk_scale);
+        }
+
+        return 0;
+}
+
+static int simtec_call_startup(struct s3c24xx_audio_simtec_pdata *pd)
+{
+        /* call any board supplied startup code, this currently only
+         * covers the bast/vr1000 which have a CPLD in the way of the
+         * LRCLK */
+        if (pd->startup)
+                pd->startup();
+
+        return 0;
+}
+
+static struct snd_soc_ops simtec_snd_ops = {
+        .hw_params      = simtec_hw_params,
+};
+
+/**
+ * attach_gpio_amp - get and configure the necessary gpios
+ * @dev: The device we're probing.
+ * @pd: The platform data supplied by the board.
+ *
+ * If there is a GPIO based amplifier attached to the board, claim
+ * the necessary GPIO lines for it, and set default values.
+ */
+static int attach_gpio_amp(struct device *dev,
+                           struct s3c24xx_audio_simtec_pdata *pd)
+{
+        int ret;
+
+        /* attach gpio amp gain (if any) */
+        if (pdata->amp_gain[0] > 0) {
+                ret = gpio_request(pd->amp_gain[0], "gpio-amp-gain0");
+                if (ret) {
+                        dev_err(dev, "cannot get amp gpio gain0\n");
+                        return ret;
+                }
+
+                ret = gpio_request(pd->amp_gain[1], "gpio-amp-gain1");
+                if (ret) {
+                        dev_err(dev, "cannot get amp gpio gain1\n");
+                        gpio_free(pdata->amp_gain[0]);
+                        return ret;
+                }
+
+                gpio_direction_output(pd->amp_gain[0], 0);
+                gpio_direction_output(pd->amp_gain[1], 0);
+        }
+
+        /* note, currently we assume GPA0 isn't valid amp */
+        if (pdata->amp_gpio > 0) {
+                ret = gpio_request(pd->amp_gpio, "gpio-amp");
+                if (ret) {
+                        dev_err(dev, "cannot get amp gpio %d (%d)\n",
+                                pd->amp_gpio, ret);
+                        goto err_amp;
+                }
+
+                /* set the amp off at startup */
+                spk_unmute_state(0);
+        }
+
+        return 0;
+
+err_amp:
+        if (pd->amp_gain[0] > 0) {
+                gpio_free(pd->amp_gain[0]);
+                gpio_free(pd->amp_gain[1]);
+        }
+
+        return ret;
+}
+
+static void detach_gpio_amp(struct s3c24xx_audio_simtec_pdata *pd)
+{
+        if (pd->amp_gain[0] > 0) {
+                gpio_free(pd->amp_gain[0]);
+                gpio_free(pd->amp_gain[1]);
+        }
+
+        if (pd->amp_gpio > 0)
+                gpio_free(pd->amp_gpio);
+}
+
+#ifdef CONFIG_PM
+int simtec_audio_resume(struct device *dev)
+{
+        simtec_call_startup(pdata);
+        return 0;
+}
+
+const struct dev_pm_ops simtec_audio_pmops = {
+        .resume = simtec_audio_resume,
+};
+EXPORT_SYMBOL_GPL(simtec_audio_pmops);
+#endif
+
+int __devinit simtec_audio_core_probe(struct platform_device *pdev,
+                                      struct snd_soc_card *card)
+{
+        struct platform_device *snd_dev;
+        int ret;
+
+        card->dai_link->ops = &simtec_snd_ops;
+
+        pdata = pdev->dev.platform_data;
+        if (!pdata) {
+                dev_err(&pdev->dev, "no platform data supplied\n");
+                return -EINVAL;
+        }
+
+        simtec_call_startup(pdata);
+
+        xtal_clk = clk_get(&pdev->dev, "xtal");
+        if (IS_ERR(xtal_clk)) {
+                dev_err(&pdev->dev, "could not get clkout0\n");
+                return -EINVAL;
+        }
+
+        dev_info(&pdev->dev, "xtal rate is %ld\n", clk_get_rate(xtal_clk));
+
+        ret = attach_gpio_amp(&pdev->dev, pdata);
+        if (ret)
+                goto err_clk;
+
+        snd_dev = platform_device_alloc("soc-audio", -1);
+        if (!snd_dev) {
+                dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n");
+                ret = -ENOMEM;
+                goto err_gpio;
+        }
+
+        platform_set_drvdata(snd_dev, card);
+
+        ret = platform_device_add(snd_dev);
+        if (ret) {
+                dev_err(&pdev->dev, "failed to add soc-audio dev\n");
+                goto err_pdev;
+        }
+
+        platform_set_drvdata(pdev, snd_dev);
+        return 0;
+
+err_pdev:
+        platform_device_put(snd_dev);
+
+err_gpio:
+        detach_gpio_amp(pdata);
+
+err_clk:
+        clk_put(xtal_clk);
+        return ret;
+}
+EXPORT_SYMBOL_GPL(simtec_audio_core_probe);
+
+int __devexit simtec_audio_remove(struct platform_device *pdev)
+{
+        struct platform_device *snd_dev = platform_get_drvdata(pdev);
+
+        platform_device_unregister(snd_dev);
+
+        detach_gpio_amp(pdata);
+        clk_put(xtal_clk);
+        return 0;
+}
+EXPORT_SYMBOL_GPL(simtec_audio_remove);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio common support");
+MODULE_LICENSE("GPL");