aboutsummaryrefslogtreecommitdiffstats
path: root/sound/oss/cs4232.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /sound/oss/cs4232.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'sound/oss/cs4232.c')
-rw-r--r--sound/oss/cs4232.c520
1 files changed, 520 insertions, 0 deletions
diff --git a/sound/oss/cs4232.c b/sound/oss/cs4232.c
new file mode 100644
index 000000000000..6ec308f5d935
--- /dev/null
+++ b/sound/oss/cs4232.c
@@ -0,0 +1,520 @@
1/*
2 * Copyright (C) by Hannu Savolainen 1993-1997
3 *
4 * cs4232.c
5 *
6 * The low level driver for Crystal CS4232 based cards. The CS4232 is
7 * a PnP compatible chip which contains a CS4231A codec, SB emulation,
8 * a MPU401 compatible MIDI port, joystick and synthesizer and IDE CD-ROM
9 * interfaces. This is just a temporary driver until full PnP support
10 * gets implemented. Just the WSS codec, FM synth and the MIDI ports are
11 * supported. Other interfaces are left uninitialized.
12 *
13 * ifdef ...WAVEFRONT...
14 *
15 * Support is provided for initializing the WaveFront synth
16 * interface as well, which is logical device #4. Note that if
17 * you have a Tropez+ card, you probably don't need to setup
18 * the CS4232-supported MIDI interface, since it corresponds to
19 * the internal 26-pin header that's hard to access. Using this
20 * requires an additional IRQ, a resource none too plentiful in
21 * this environment. Just don't set module parameters mpuio and
22 * mpuirq, and the MIDI port will be left uninitialized. You can
23 * still use the ICS2115 hosted MIDI interface which corresponds
24 * to the 9-pin D connector on the back of the card.
25 *
26 * endif ...WAVEFRONT...
27 *
28 * Supported chips are:
29 * CS4232
30 * CS4236
31 * CS4236B
32 *
33 * Note: You will need a PnP config setup to initialise some CS4232 boards
34 * anyway.
35 *
36 * Changes
37 * John Rood Added Bose Sound System Support.
38 * Toshio Spoor
39 * Alan Cox Modularisation, Basic cleanups.
40 * Paul Barton-Davis Separated MPU configuration, added
41 * Tropez+ (WaveFront) support
42 * Christoph Hellwig Adapted to module_init/module_exit,
43 * simple cleanups
44 * Arnaldo C. de Melo got rid of attach_uart401
45 * Bartlomiej Zolnierkiewicz
46 * Added some __init/__initdata/__exit
47 * Marcus Meissner Added ISA PnP support.
48 */
49
50#include <linux/config.h>
51#include <linux/pnp.h>
52#include <linux/module.h>
53#include <linux/init.h>
54
55#include "sound_config.h"
56
57#include "ad1848.h"
58#include "mpu401.h"
59
60#define KEY_PORT 0x279 /* Same as LPT1 status port */
61#define CSN_NUM 0x99 /* Just a random number */
62#define INDEX_ADDRESS 0x00 /* (R0) Index Address Register */
63#define INDEX_DATA 0x01 /* (R1) Indexed Data Register */
64#define PIN_CONTROL 0x0a /* (I10) Pin Control */
65#define ENABLE_PINS 0xc0 /* XCTRL0/XCTRL1 enable */
66
67static void CS_OUT(unsigned char a)
68{
69 outb(a, KEY_PORT);
70}
71
72#define CS_OUT2(a, b) {CS_OUT(a);CS_OUT(b);}
73#define CS_OUT3(a, b, c) {CS_OUT(a);CS_OUT(b);CS_OUT(c);}
74
75static int __initdata bss = 0;
76static int mpu_base, mpu_irq;
77static int synth_base, synth_irq;
78static int mpu_detected;
79
80static int probe_cs4232_mpu(struct address_info *hw_config)
81{
82 /*
83 * Just write down the config values.
84 */
85
86 mpu_base = hw_config->io_base;
87 mpu_irq = hw_config->irq;
88
89 return 1;
90}
91
92static unsigned char crystal_key[] = /* A 32 byte magic key sequence */
93{
94 0x96, 0x35, 0x9a, 0xcd, 0xe6, 0xf3, 0x79, 0xbc,
95 0x5e, 0xaf, 0x57, 0x2b, 0x15, 0x8a, 0xc5, 0xe2,
96 0xf1, 0xf8, 0x7c, 0x3e, 0x9f, 0x4f, 0x27, 0x13,
97 0x09, 0x84, 0x42, 0xa1, 0xd0, 0x68, 0x34, 0x1a
98};
99
100static void sleep(unsigned howlong)
101{
102 current->state = TASK_INTERRUPTIBLE;
103 schedule_timeout(howlong);
104}
105
106static void enable_xctrl(int baseio)
107{
108 unsigned char regd;
109
110 /*
111 * Some IBM Aptiva's have the Bose Sound System. By default
112 * the Bose Amplifier is disabled. The amplifier will be
113 * activated, by setting the XCTRL0 and XCTRL1 bits.
114 * Volume of the monitor bose speakers/woofer, can then
115 * be set by changing the PCM volume.
116 *
117 */
118
119 printk("cs4232: enabling Bose Sound System Amplifier.\n");
120
121 /* Switch to Pin Control Address */
122 regd = inb(baseio + INDEX_ADDRESS) & 0xe0;
123 outb(((unsigned char) (PIN_CONTROL | regd)), baseio + INDEX_ADDRESS );
124
125 /* Activate the XCTRL0 and XCTRL1 Pins */
126 regd = inb(baseio + INDEX_DATA);
127 outb(((unsigned char) (ENABLE_PINS | regd)), baseio + INDEX_DATA );
128}
129
130static int __init probe_cs4232(struct address_info *hw_config, int isapnp_configured)
131{
132 int i, n;
133 int base = hw_config->io_base, irq = hw_config->irq;
134 int dma1 = hw_config->dma, dma2 = hw_config->dma2;
135 struct resource *ports;
136
137 if (base == -1 || irq == -1 || dma1 == -1) {
138 printk(KERN_ERR "cs4232: dma, irq and io must be set.\n");
139 return 0;
140 }
141
142 /*
143 * Verify that the I/O port range is free.
144 */
145
146 ports = request_region(base, 4, "ad1848");
147 if (!ports) {
148 printk(KERN_ERR "cs4232.c: I/O port 0x%03x not free\n", base);
149 return 0;
150 }
151 if (ad1848_detect(ports, NULL, hw_config->osp)) {
152 goto got_it; /* The card is already active */
153 }
154 if (isapnp_configured) {
155 printk(KERN_ERR "cs4232.c: ISA PnP configured, but not detected?\n");
156 goto fail;
157 }
158
159 /*
160 * This version of the driver doesn't use the PnP method when configuring
161 * the card but a simplified method defined by Crystal. This means that
162 * just one CS4232 compatible device can exist on the system. Also this
163 * method conflicts with possible PnP support in the OS. For this reason
164 * driver is just a temporary kludge.
165 *
166 * Also the Cirrus/Crystal method doesn't always work. Try ISA PnP first ;)
167 */
168
169 /*
170 * Repeat initialization few times since it doesn't always succeed in
171 * first time.
172 */
173
174 for (n = 0; n < 4; n++)
175 {
176 /*
177 * Wake up the card by sending a 32 byte Crystal key to the key port.
178 */
179
180 for (i = 0; i < 32; i++)
181 CS_OUT(crystal_key[i]);
182
183 sleep(HZ / 10);
184
185 /*
186 * Now set the CSN (Card Select Number).
187 */
188
189 CS_OUT2(0x06, CSN_NUM);
190
191 /*
192 * Then set some config bytes. First logical device 0
193 */
194
195 CS_OUT2(0x15, 0x00); /* Select logical device 0 (WSS/SB/FM) */
196 CS_OUT3(0x47, (base >> 8) & 0xff, base & 0xff); /* WSS base */
197
198 if (check_region(0x388, 4)) /* Not free */
199 CS_OUT3(0x48, 0x00, 0x00) /* FM base off */
200 else
201 CS_OUT3(0x48, 0x03, 0x88); /* FM base 0x388 */
202
203 CS_OUT3(0x42, 0x00, 0x00); /* SB base off */
204 CS_OUT2(0x22, irq); /* SB+WSS IRQ */
205 CS_OUT2(0x2a, dma1); /* SB+WSS DMA */
206
207 if (dma2 != -1)
208 CS_OUT2(0x25, dma2) /* WSS DMA2 */
209 else
210 CS_OUT2(0x25, 4); /* No WSS DMA2 */
211
212 CS_OUT2(0x33, 0x01); /* Activate logical dev 0 */
213
214 sleep(HZ / 10);
215
216 /*
217 * Initialize logical device 3 (MPU)
218 */
219
220 if (mpu_base != 0 && mpu_irq != 0)
221 {
222 CS_OUT2(0x15, 0x03); /* Select logical device 3 (MPU) */
223 CS_OUT3(0x47, (mpu_base >> 8) & 0xff, mpu_base & 0xff); /* MPU base */
224 CS_OUT2(0x22, mpu_irq); /* MPU IRQ */
225 CS_OUT2(0x33, 0x01); /* Activate logical dev 3 */
226 }
227
228 if(synth_base != 0)
229 {
230 CS_OUT2 (0x15, 0x04); /* logical device 4 (WaveFront) */
231 CS_OUT3 (0x47, (synth_base >> 8) & 0xff,
232 synth_base & 0xff); /* base */
233 CS_OUT2 (0x22, synth_irq); /* IRQ */
234 CS_OUT2 (0x33, 0x01); /* Activate logical dev 4 */
235 }
236
237 /*
238 * Finally activate the chip
239 */
240
241 CS_OUT(0x79);
242
243 sleep(HZ / 5);
244
245 /*
246 * Then try to detect the codec part of the chip
247 */
248
249 if (ad1848_detect(ports, NULL, hw_config->osp))
250 goto got_it;
251
252 sleep(HZ);
253 }
254fail:
255 release_region(base, 4);
256 return 0;
257
258got_it:
259 if (dma2 == -1)
260 dma2 = dma1;
261
262 hw_config->slots[0] = ad1848_init("Crystal audio controller", ports,
263 irq,
264 dma1, /* Playback DMA */
265 dma2, /* Capture DMA */
266 0,
267 hw_config->osp,
268 THIS_MODULE);
269
270 if (hw_config->slots[0] != -1 &&
271 audio_devs[hw_config->slots[0]]->mixer_dev!=-1)
272 {
273 /* Assume the mixer map is as suggested in the CS4232 databook */
274 AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE);
275 AD1848_REROUTE(SOUND_MIXER_LINE2, SOUND_MIXER_CD);
276 AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_SYNTH); /* FM synth */
277 }
278 if (mpu_base != 0 && mpu_irq != 0)
279 {
280 static struct address_info hw_config2 = {
281 0
282 }; /* Ensure it's initialized */
283
284 hw_config2.io_base = mpu_base;
285 hw_config2.irq = mpu_irq;
286 hw_config2.dma = -1;
287 hw_config2.dma2 = -1;
288 hw_config2.always_detect = 0;
289 hw_config2.name = NULL;
290 hw_config2.driver_use_1 = 0;
291 hw_config2.driver_use_2 = 0;
292 hw_config2.card_subtype = 0;
293
294 if (probe_uart401(&hw_config2, THIS_MODULE))
295 {
296 mpu_detected = 1;
297 }
298 else
299 {
300 mpu_base = mpu_irq = 0;
301 }
302 hw_config->slots[1] = hw_config2.slots[1];
303 }
304
305 if (bss)
306 enable_xctrl(base);
307
308 return 1;
309}
310
311static void __devexit unload_cs4232(struct address_info *hw_config)
312{
313 int base = hw_config->io_base, irq = hw_config->irq;
314 int dma1 = hw_config->dma, dma2 = hw_config->dma2;
315
316 if (dma2 == -1)
317 dma2 = dma1;
318
319 ad1848_unload(base,
320 irq,
321 dma1, /* Playback DMA */
322 dma2, /* Capture DMA */
323 0);
324
325 sound_unload_audiodev(hw_config->slots[0]);
326 if (mpu_base != 0 && mpu_irq != 0 && mpu_detected)
327 {
328 static struct address_info hw_config2 =
329 {
330 0
331 }; /* Ensure it's initialized */
332
333 hw_config2.io_base = mpu_base;
334 hw_config2.irq = mpu_irq;
335 hw_config2.dma = -1;
336 hw_config2.dma2 = -1;
337 hw_config2.always_detect = 0;
338 hw_config2.name = NULL;
339 hw_config2.driver_use_1 = 0;
340 hw_config2.driver_use_2 = 0;
341 hw_config2.card_subtype = 0;
342 hw_config2.slots[1] = hw_config->slots[1];
343
344 unload_uart401(&hw_config2);
345 }
346}
347
348static struct address_info cfg;
349static struct address_info cfg_mpu;
350
351static int __initdata io = -1;
352static int __initdata irq = -1;
353static int __initdata dma = -1;
354static int __initdata dma2 = -1;
355static int __initdata mpuio = -1;
356static int __initdata mpuirq = -1;
357static int __initdata synthio = -1;
358static int __initdata synthirq = -1;
359static int __initdata isapnp = 1;
360
361MODULE_DESCRIPTION("CS4232 based soundcard driver");
362MODULE_AUTHOR("Hannu Savolainen, Paul Barton-Davis");
363MODULE_LICENSE("GPL");
364
365module_param(io, int, 0);
366MODULE_PARM_DESC(io,"base I/O port for AD1848");
367module_param(irq, int, 0);
368MODULE_PARM_DESC(irq,"IRQ for AD1848 chip");
369module_param(dma, int, 0);
370MODULE_PARM_DESC(dma,"8 bit DMA for AD1848 chip");
371module_param(dma2, int, 0);
372MODULE_PARM_DESC(dma2,"16 bit DMA for AD1848 chip");
373module_param(mpuio, int, 0);
374MODULE_PARM_DESC(mpuio,"MPU 401 base address");
375module_param(mpuirq, int, 0);
376MODULE_PARM_DESC(mpuirq,"MPU 401 IRQ");
377module_param(synthio, int, 0);
378MODULE_PARM_DESC(synthio,"Maui WaveTable base I/O port");
379module_param(synthirq, int, 0);
380MODULE_PARM_DESC(synthirq,"Maui WaveTable IRQ");
381module_param(isapnp, bool, 0);
382MODULE_PARM_DESC(isapnp,"Enable ISAPnP probing (default 1)");
383module_param(bss, bool, 0);
384MODULE_PARM_DESC(bss,"Enable Bose Sound System Support (default 0)");
385
386/*
387 * Install a CS4232 based card. Need to have ad1848 and mpu401
388 * loaded ready.
389 */
390
391/* All cs4232 based cards have the main ad1848 card either as CSC0000 or
392 * CSC0100. */
393static const struct pnp_device_id cs4232_pnp_table[] = {
394 { .id = "CSC0100", .driver_data = 0 },
395 { .id = "CSC0000", .driver_data = 0 },
396 /* Guillemot Turtlebeach something appears to be cs4232 compatible
397 * (untested) */
398 { .id = "GIM0100", .driver_data = 0 },
399 { .id = ""}
400};
401
402MODULE_DEVICE_TABLE(pnp, cs4232_pnp_table);
403
404static int cs4232_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
405{
406 struct address_info *isapnpcfg;
407
408 isapnpcfg=(struct address_info*)kmalloc(sizeof(*isapnpcfg),GFP_KERNEL);
409 if (!isapnpcfg)
410 return -ENOMEM;
411
412 isapnpcfg->irq = pnp_irq(dev, 0);
413 isapnpcfg->dma = pnp_dma(dev, 0);
414 isapnpcfg->dma2 = pnp_dma(dev, 1);
415 isapnpcfg->io_base = pnp_port_start(dev, 0);
416 if (probe_cs4232(isapnpcfg,TRUE) == 0) {
417 printk(KERN_ERR "cs4232: ISA PnP card found, but not detected?\n");
418 kfree(isapnpcfg);
419 return -ENODEV;
420 }
421 pnp_set_drvdata(dev,isapnpcfg);
422 return 0;
423}
424
425static void __devexit cs4232_pnp_remove(struct pnp_dev *dev)
426{
427 struct address_info *cfg = pnp_get_drvdata(dev);
428 if (cfg) {
429 unload_cs4232(cfg);
430 kfree(cfg);
431 }
432}
433
434static struct pnp_driver cs4232_driver = {
435 .name = "cs4232",
436 .id_table = cs4232_pnp_table,
437 .probe = cs4232_pnp_probe,
438 .remove = __devexit_p(cs4232_pnp_remove),
439};
440
441static int __init init_cs4232(void)
442{
443#ifdef CONFIG_SOUND_WAVEFRONT_MODULE
444 if(synthio == -1)
445 printk(KERN_INFO "cs4232: set synthio and synthirq to use the wavefront facilities.\n");
446 else {
447 synth_base = synthio;
448 synth_irq = synthirq;
449 }
450#else
451 if(synthio != -1)
452 printk(KERN_WARNING "cs4232: wavefront support not enabled in this driver.\n");
453#endif
454 cfg.irq = -1;
455
456 if (isapnp &&
457 (pnp_register_driver(&cs4232_driver) > 0)
458 )
459 return 0;
460
461 if(io==-1||irq==-1||dma==-1)
462 {
463 printk(KERN_ERR "cs4232: Must set io, irq and dma.\n");
464 return -ENODEV;
465 }
466
467 cfg.io_base = io;
468 cfg.irq = irq;
469 cfg.dma = dma;
470 cfg.dma2 = dma2;
471
472 cfg_mpu.io_base = -1;
473 cfg_mpu.irq = -1;
474
475 if (mpuio != -1 && mpuirq != -1) {
476 cfg_mpu.io_base = mpuio;
477 cfg_mpu.irq = mpuirq;
478 probe_cs4232_mpu(&cfg_mpu); /* Bug always returns 0 not OK -- AC */
479 }
480
481 if (probe_cs4232(&cfg,FALSE) == 0)
482 return -ENODEV;
483
484 return 0;
485}
486
487static void __exit cleanup_cs4232(void)
488{
489 pnp_unregister_driver(&cs4232_driver);
490 if (cfg.irq != -1)
491 unload_cs4232(&cfg); /* Unloads global MPU as well, if needed */
492}
493
494module_init(init_cs4232);
495module_exit(cleanup_cs4232);
496
497#ifndef MODULE
498static int __init setup_cs4232(char *str)
499{
500 /* io, irq, dma, dma2 mpuio, mpuirq*/
501 int ints[7];
502
503 /* If we have isapnp cards, no need for options */
504 if (pnp_register_driver(&cs4232_driver) > 0)
505 return 1;
506
507 str = get_options(str, ARRAY_SIZE(ints), ints);
508
509 io = ints[1];
510 irq = ints[2];
511 dma = ints[3];
512 dma2 = ints[4];
513 mpuio = ints[5];
514 mpuirq = ints[6];
515
516 return 1;
517}
518
519__setup("cs4232=", setup_cs4232);
520#endif