[ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()

This is really pxa27x specific and should be kept in pxa27x.c. With this
newly introduced function, the original set_resetgpio_mode() is deprecated.

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

1 files changed, 6 insertions, 44 deletions

diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index 7587a748ea06..ee687283b6a1 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -32,6 +32,8 @@ static struct clk *ac97_clk;
 static struct clk *ac97conf_clk;
 static int reset_gpio;
 
+extern void pxa27x_assert_ac97reset(int reset_gpio, int on);
+
 /*
  * Beware PXA27x bugs:
  *
@@ -42,45 +44,6 @@ static int reset_gpio;
  * 1 jiffy timeout if interrupt never comes).
  */
 
-enum {
-        RESETGPIO_FORCE_HIGH,
-        RESETGPIO_FORCE_LOW,
-        RESETGPIO_NORMAL_ALTFUNC
-};
-
-/**
- * set_resetgpio_mode - computes and sets the AC97_RESET gpio mode on PXA
- * @mode: chosen action
- *
- * As the PXA27x CPUs suffer from a AC97 bug, a manual control of the reset line
- * must be done to insure proper work of AC97 reset line.  This function
- * computes the correct gpio_mode for further use by reset functions, and
- * applied the change through pxa_gpio_mode.
- */
-static void set_resetgpio_mode(int resetgpio_action)
-{
-        int mode = 0;
-
-        if (reset_gpio)
-                switch (resetgpio_action) {
-                case RESETGPIO_NORMAL_ALTFUNC:
-                        if (reset_gpio == 113)
-                                mode = 113 | GPIO_ALT_FN_2_OUT;
-                        if (reset_gpio == 95)
-                                mode = 95 | GPIO_ALT_FN_1_OUT;
-                        break;
-                case RESETGPIO_FORCE_LOW:
-                        mode = reset_gpio | GPIO_OUT | GPIO_DFLT_LOW;
-                        break;
-                case RESETGPIO_FORCE_HIGH:
-                        mode = reset_gpio | GPIO_OUT | GPIO_DFLT_HIGH;
-                        break;
-                };
-
-        if (mode)
-                pxa_gpio_mode(mode);
-}
-
 unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
 {
         unsigned short val = -1;
@@ -174,12 +137,11 @@ static inline void pxa_ac97_warm_pxa27x(void)
 {
         gsr_bits = 0;
 
-        /* warm reset broken on Bulverde,
-           so manually keep AC97 reset high */
-        set_resetgpio_mode(RESETGPIO_FORCE_HIGH);
+        /* warm reset broken on Bulverde, so manually keep AC97 reset high */
+        pxa27x_assert_ac97reset(reset_gpio, 1);
         udelay(10);
         GCR |= GCR_WARM_RST;
-        set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
+        pxa27x_assert_ac97reset(reset_gpio, 0);
         udelay(500);
 }
 
@@ -385,7 +347,7 @@ int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
 
         if (cpu_is_pxa27x()) {
                 /* Use GPIO 113 as AC97 Reset on Bulverde */
-                set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
+                pxa27x_assert_ac97reset(reset_gpio, 0);
                 ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
                 if (IS_ERR(ac97conf_clk)) {
                         ret = PTR_ERR(ac97conf_clk);