tipc: Eliminate configuration for maximum number of cluster nodes

Gets rid of the need for users to specify the maximum number of
cluster nodes supported by TIPC. TIPC now automatically provides
support for all 4K nodes allowed by its addressing scheme.

Note: This change sets TIPC's memory usage to the amount used by
a maximum size node table with 4K entries.  An upcoming patch that
converts the node table from a linear array to a hash table will
compact the node table to a more efficient design, but for clarity
it is nice to have all the Kconfig infrastruture go away separately.

Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

6 files changed, 7 insertions, 55 deletions

diff --git a/net/tipc/Kconfig b/net/tipc/Kconfig
index 0436927369f3..2c5954b85933 100644
--- a/net/tipc/Kconfig
+++ b/net/tipc/Kconfig
@@ -29,18 +29,6 @@ config TIPC_ADVANCED
           Saying Y here will open some advanced configuration for TIPC.
           Most users do not need to bother; if unsure, just say N.
 
-config TIPC_NODES
-        int "Maximum number of nodes in a cluster"
-        depends on TIPC_ADVANCED
-        range 8 2047
-        default "255"
-        help
-          Specifies how many nodes can be supported in a TIPC cluster.
-          Can range from 8 to 2047 nodes; default is 255.
-
-          Setting this to a smaller value saves some memory;
-          setting it to higher allows for more nodes.
-
 config TIPC_PORTS
         int "Maximum number of ports in a node"
         depends on TIPC_ADVANCED
diff --git a/net/tipc/addr.c b/net/tipc/addr.c
index 087e399518c1..a6fdab33877e 100644
--- a/net/tipc/addr.c
+++ b/net/tipc/addr.c
@@ -2,7 +2,7 @@
  * net/tipc/addr.c: TIPC address utility routines
  *
  * Copyright (c) 2000-2006, Ericsson AB
- * Copyright (c) 2004-2005, Wind River Systems
+ * Copyright (c) 2004-2005, 2010-2011, Wind River Systems
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,7 +41,7 @@
  * tipc_addr_domain_valid - validates a network domain address
  *
  * Accepts <Z.C.N>, <Z.C.0>, <Z.0.0>, and <0.0.0>,
- * where Z, C, and N are non-zero and do not exceed the configured limits.
+ * where Z, C, and N are non-zero.
  *
  * Returns 1 if domain address is valid, otherwise 0
  */
@@ -51,10 +51,6 @@ int tipc_addr_domain_valid(u32 addr)
         u32 n = tipc_node(addr);
         u32 c = tipc_cluster(addr);
         u32 z = tipc_zone(addr);
-        u32 max_nodes = tipc_max_nodes;
-
-        if (n > max_nodes)
-                return 0;
 
         if (n && (!z || !c))
                 return 0;
@@ -66,8 +62,7 @@ int tipc_addr_domain_valid(u32 addr)
 /**
  * tipc_addr_node_valid - validates a proposed network address for this node
  *
- * Accepts <Z.C.N>, where Z, C, and N are non-zero and do not exceed
- * the configured limits.
+ * Accepts <Z.C.N>, where Z, C, and N are non-zero.
  *
  * Returns 1 if address can be used, otherwise 0
  */
diff --git a/net/tipc/config.c b/net/tipc/config.c
index e16750dcf3c1..fa3d50860055 100644
--- a/net/tipc/config.c
+++ b/net/tipc/config.c
@@ -2,7 +2,7 @@
  * net/tipc/config.c: TIPC configuration management code
  *
  * Copyright (c) 2002-2006, Ericsson AB
- * Copyright (c) 2004-2007, Wind River Systems
+ * Copyright (c) 2004-2007, 2010-2011, Wind River Systems
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -260,25 +260,6 @@ static struct sk_buff *cfg_set_max_ports(void)
         return tipc_cfg_reply_none();
 }
 
-static struct sk_buff *cfg_set_max_nodes(void)
-{
-        u32 value;
-
-        if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED))
-                return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
-        value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area));
-        if (value == tipc_max_nodes)
-                return tipc_cfg_reply_none();
-        if (value != delimit(value, 8, 2047))
-                return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE
-                                                   " (max nodes must be 8-2047)");
-        if (tipc_mode == TIPC_NET_MODE)
-                return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
-                        " (cannot change max nodes once TIPC has joined a network)");
-        tipc_max_nodes = value;
-        return tipc_cfg_reply_none();
-}
-
 static struct sk_buff *cfg_set_netid(void)
 {
         u32 value;
@@ -397,9 +378,6 @@ struct sk_buff *tipc_cfg_do_cmd(u32 orig_node, u16 cmd, const void *request_area
         case TIPC_CMD_SET_MAX_SUBSCR:
                 rep_tlv_buf = cfg_set_max_subscriptions();
                 break;
-        case TIPC_CMD_SET_MAX_NODES:
-                rep_tlv_buf = cfg_set_max_nodes();
-                break;
         case TIPC_CMD_SET_NETID:
                 rep_tlv_buf = cfg_set_netid();
                 break;
@@ -415,9 +393,6 @@ struct sk_buff *tipc_cfg_do_cmd(u32 orig_node, u16 cmd, const void *request_area
         case TIPC_CMD_GET_MAX_SUBSCR:
                 rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_subscriptions);
                 break;
-        case TIPC_CMD_GET_MAX_NODES:
-                rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_nodes);
-                break;
         case TIPC_CMD_GET_NETID:
                 rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_net_id);
                 break;
@@ -431,6 +406,8 @@ struct sk_buff *tipc_cfg_do_cmd(u32 orig_node, u16 cmd, const void *request_area
         case TIPC_CMD_GET_MAX_SLAVES:
         case TIPC_CMD_SET_MAX_CLUSTERS:
         case TIPC_CMD_GET_MAX_CLUSTERS:
+        case TIPC_CMD_SET_MAX_NODES:
+        case TIPC_CMD_GET_MAX_NODES:
                 rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
                                                           " (obsolete command)");
                 break;
diff --git a/net/tipc/core.c b/net/tipc/core.c
index 2da1fc75ad65..c9a73e7763f6 100644
--- a/net/tipc/core.c
+++ b/net/tipc/core.c
@@ -41,10 +41,6 @@
 #include "config.h"
 
 
-#ifndef CONFIG_TIPC_NODES
-#define CONFIG_TIPC_NODES 255
-#endif
-
 #ifndef CONFIG_TIPC_PORTS
 #define CONFIG_TIPC_PORTS 8191
 #endif
@@ -64,7 +60,6 @@ const char tipc_alphabet[] =
 /* configurable TIPC parameters */
 
 u32 tipc_own_addr;
-int tipc_max_nodes;
 int tipc_max_ports;
 int tipc_max_subscriptions;
 int tipc_max_publications;
@@ -192,7 +187,6 @@ static int __init tipc_init(void)
         tipc_max_publications = 10000;
         tipc_max_subscriptions = 2000;
         tipc_max_ports = CONFIG_TIPC_PORTS;
-        tipc_max_nodes = CONFIG_TIPC_NODES;
         tipc_net_id = 4711;
 
         res = tipc_core_start();
diff --git a/net/tipc/core.h b/net/tipc/core.h
index 37544d9f73e1..436dda1159d2 100644
--- a/net/tipc/core.h
+++ b/net/tipc/core.h
@@ -147,7 +147,6 @@ void tipc_msg_dbg(struct print_buf *, struct tipc_msg *, const char *);
  */
 
 extern u32 tipc_own_addr;
-extern int tipc_max_nodes;
 extern int tipc_max_ports;
 extern int tipc_max_subscriptions;
 extern int tipc_max_publications;
diff --git a/net/tipc/net.c b/net/tipc/net.c
index f6303d79f7f5..b5b337f5516d 100644
--- a/net/tipc/net.c
+++ b/net/tipc/net.c
@@ -114,8 +114,7 @@ atomic_t tipc_num_links;
 
 static int net_start(void)
 {
-        tipc_nodes = kcalloc(tipc_max_nodes + 1,
-                                 sizeof(*tipc_nodes), GFP_ATOMIC);
+        tipc_nodes = kcalloc(4096, sizeof(*tipc_nodes), GFP_ATOMIC);
         tipc_highest_node = 0;
         atomic_set(&tipc_num_links, 0);