lib: add support for stmp-style devices

MX23/28 use IP cores which follow a register layout I have first seen on
STMP3xxx SoCs. In this layout, every register actually has four u32:

 1.) to store a value directly
 2.) a SET register where every 1-bit sets the corresponding bit,
     others are unaffected
 3.) same with a CLR register
 4.) same with a TOG (toggle) register

Also, the 2 MSBs in register 0 are always the same and can be used to reset
the IP core.

All this is strictly speaking not mach-specific (but IP core specific) and,
thus, doesn't need to be in mach-mxs/include. At least mx6 also uses IP cores
following this stmp-style. So:

Introduce a stmp-style device, put the code and defines for that in a public
place (lib/), and let drivers for stmp-style devices select that code.
To avoid regressions and ease reviewing, the actual code is simply copied from
mach-mxs. It definately wants updates, but those need a seperate patch series.

Voila, mach dependency gone, reusable code introduced. Note that I didn't
remove the duplicated code from mach-mxs yet, first the drivers have to be
converted.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>

3 files changed, 85 insertions, 0 deletions

diff --git a/lib/Kconfig b/lib/Kconfig
index 4a8aba2e5cc0..c5da1548b964 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -33,6 +33,9 @@ config GENERIC_IO
         boolean
         default n
 
+config STMP_DEVICE
+        bool
+
 config CRC_CCITT
         tristate "CRC-CCITT functions"
         help
diff --git a/lib/Makefile b/lib/Makefile
index 18515f0267c4..f78dbcdc7e3d 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -123,6 +123,8 @@ obj-$(CONFIG_SIGNATURE) += digsig.o
 
 obj-$(CONFIG_CLZ_TAB) += clz_tab.o
 
+obj-$(CONFIG_STMP_DEVICE) += stmp_device.o
+
 hostprogs-y     := gen_crc32table
 clean-files     := crc32table.h
 
diff --git a/lib/stmp_device.c b/lib/stmp_device.c
new file mode 100644
index 000000000000..8ac9bcc4289a
--- /dev/null
+++ b/lib/stmp_device.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
+ * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/stmp_device.h>
+
+#define STMP_MODULE_CLKGATE     (1 << 30)
+#define STMP_MODULE_SFTRST      (1 << 31)
+
+/*
+ * Clear the bit and poll it cleared.  This is usually called with
+ * a reset address and mask being either SFTRST(bit 31) or CLKGATE
+ * (bit 30).
+ */
+static int stmp_clear_poll_bit(void __iomem *addr, u32 mask)
+{
+        int timeout = 0x400;
+
+        writel(mask, addr + STMP_OFFSET_REG_CLR);
+        udelay(1);
+        while ((readl(addr) & mask) && --timeout)
+                /* nothing */;
+
+        return !timeout;
+}
+
+int stmp_reset_block(void __iomem *reset_addr)
+{
+        int ret;
+        int timeout = 0x400;
+
+        /* clear and poll SFTRST */
+        ret = stmp_clear_poll_bit(reset_addr, STMP_MODULE_SFTRST);
+        if (unlikely(ret))
+                goto error;
+
+        /* clear CLKGATE */
+        writel(STMP_MODULE_CLKGATE, reset_addr + STMP_OFFSET_REG_CLR);
+
+        /* set SFTRST to reset the block */
+        writel(STMP_MODULE_SFTRST, reset_addr + STMP_OFFSET_REG_SET);
+        udelay(1);
+
+        /* poll CLKGATE becoming set */
+        while ((!(readl(reset_addr) & STMP_MODULE_CLKGATE)) && --timeout)
+                /* nothing */;
+        if (unlikely(!timeout))
+                goto error;
+
+        /* clear and poll SFTRST */
+        ret = stmp_clear_poll_bit(reset_addr, STMP_MODULE_SFTRST);
+        if (unlikely(ret))
+                goto error;
+
+        /* clear and poll CLKGATE */
+        ret = stmp_clear_poll_bit(reset_addr, STMP_MODULE_CLKGATE);
+        if (unlikely(ret))
+                goto error;
+
+        return 0;
+
+error:
+        pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
+        return -ETIMEDOUT;
+}
+EXPORT_SYMBOL(stmp_reset_block);