{cfg,nl}80211: mesh power mode primitives and userspace access

Add the nl80211_mesh_power_mode enumeration which holds possible
values for the mesh power mode. These modes are unknown, active,
light sleep and deep sleep.

Add power_mode entry to the mesh config structure to hold the
user-configured default mesh power mode. This value will be used
for new peer links.

Add the dot11MeshAwakeWindowDuration value to the mesh config.
The awake window is a duration in TU describing how long the STA
will stay awake after transmitting its beacon in PS mode.

Add access routines to:
 - get/set local link-specific power mode (STA)
 - get remote STA's link-specific power mode (STA)
 - get remote STA's non-peer power mode (STA)
 - get/set default mesh power mode (mesh config)
 - get/set mesh awake window duration (mesh config)

All config changes may be done at mesh runtime and take effect
immediately.

Signed-off-by: Marco Porsch <marco@cozybit.com>
Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com>
Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com>
[fix commit message line length, error handling in set station]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

1 files changed, 47 insertions, 0 deletions

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 547017100a30..6c4f703ae890 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1310,6 +1310,9 @@ enum nl80211_commands {
  *      if not given in START_AP 0 is assumed, if not given in SET_BSS
  *      no change is made.
  *
+ * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode
+ *      defined in &enum nl80211_mesh_power_mode.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1580,6 +1583,8 @@ enum nl80211_attrs {
         NL80211_ATTR_P2P_CTWINDOW,
         NL80211_ATTR_P2P_OPPPS,
 
+        NL80211_ATTR_LOCAL_MESH_POWER_MODE,
+
         /* add attributes here, update the policy in nl80211.c */
 
         __NL80211_ATTR_AFTER_LAST,
@@ -1838,6 +1843,10 @@ enum nl80211_sta_bss_param {
  * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
  * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
  * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
+ * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode
+ * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
+ * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
+ *      non-peer STA
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -1862,6 +1871,9 @@ enum nl80211_sta_info {
         NL80211_STA_INFO_STA_FLAGS,
         NL80211_STA_INFO_BEACON_LOSS,
         NL80211_STA_INFO_T_OFFSET,
+        NL80211_STA_INFO_LOCAL_PM,
+        NL80211_STA_INFO_PEER_PM,
+        NL80211_STA_INFO_NONPEER_PM,
 
         /* keep last */
         __NL80211_STA_INFO_AFTER_LAST,
@@ -2253,6 +2265,34 @@ enum nl80211_mntr_flags {
 };
 
 /**
+ * enum nl80211_mesh_power_mode - mesh power save modes
+ *
+ * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is
+ *      not known or has not been set yet.
+ * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is
+ *      in Awake state all the time.
+ * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will
+ *      alternate between Active and Doze states, but will wake up for
+ *      neighbor's beacons.
+ * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will
+ *      alternate between Active and Doze states, but may not wake up
+ *      for neighbor's beacons.
+ *
+ * @__NL80211_MESH_POWER_AFTER_LAST - internal use
+ * @NL80211_MESH_POWER_MAX - highest possible power save level
+ */
+
+enum nl80211_mesh_power_mode {
+        NL80211_MESH_POWER_UNKNOWN,
+        NL80211_MESH_POWER_ACTIVE,
+        NL80211_MESH_POWER_LIGHT_SLEEP,
+        NL80211_MESH_POWER_DEEP_SLEEP,
+
+        __NL80211_MESH_POWER_AFTER_LAST,
+        NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1
+};
+
+/**
  * enum nl80211_meshconf_params - mesh configuration parameters
  *
  * Mesh configuration parameters. These can be changed while the mesh is
@@ -2346,6 +2386,11 @@ enum nl80211_mntr_flags {
  *      (in TUs) during which a mesh STA can send only one Action frame
  *      containing a PREQ element for root path confirmation.
  *
+ * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links.
+ *      type &enum nl80211_mesh_power_mode (u32)
+ *
+ * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)
+ *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_meshconf_params {
@@ -2375,6 +2420,8 @@ enum nl80211_meshconf_params {
         NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
         NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
         NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
+        NL80211_MESHCONF_POWER_MODE,
+        NL80211_MESHCONF_AWAKE_WINDOW,
 
         /* keep last */
         __NL80211_MESHCONF_ATTR_AFTER_LAST,