Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

Conflicts:
	drivers/net/wireless/iwlwifi/pcie/tx.c

1 files changed, 95 insertions, 18 deletions

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 617d0fbfc96f..33a417481ad8 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -118,8 +118,9 @@
  *      to get a list of all present wiphys.
  * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
  *      %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- *      %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
- *      %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
+ *      %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the
+ *      attributes determining the channel width; this is used for setting
+ *      monitor mode channel),  %NL80211_ATTR_WIPHY_RETRY_SHORT,
  *      %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
  *      and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
  *      However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
@@ -171,7 +172,7 @@
  *      %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
  *      %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
  *      The channel to use can be set on the interface or be given using the
- *      %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_CHANNEL_TYPE attrs.
+ *      %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
  * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
  * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
  * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
@@ -401,8 +402,7 @@
  *      a response while being associated to an AP on another channel.
  *      %NL80211_ATTR_IFINDEX is used to specify which interface (and thus
  *      radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
- *      frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
- *      optionally used to specify additional channel parameters.
+ *      frequency for the operation.
  *      %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
  *      to remain on the channel. This command is also used as an event to
  *      notify when the requested duration starts (it may take a while for the
@@ -440,12 +440,11 @@
  *      as an event indicating reception of a frame that was not processed in
  *      kernel code, but is for us (i.e., which may need to be processed in a
  *      user space application). %NL80211_ATTR_FRAME is used to specify the
- *      frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
- *      optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on
- *      which channel the frame is to be transmitted or was received. If this
- *      channel is not the current channel (remain-on-channel or the
- *      operational channel) the device will switch to the given channel and
- *      transmit the frame, optionally waiting for a response for the time
+ *      frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used
+ *      to indicate on which channel the frame is to be transmitted or was
+ *      received. If this channel is not the current channel (remain-on-channel
+ *      or the operational channel) the device will switch to the given channel
+ *      and transmit the frame, optionally waiting for a response for the time
  *      specified using %NL80211_ATTR_DURATION. When called, this operation
  *      returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
  *      TX status event pertaining to the TX request.
@@ -473,8 +472,8 @@
  *      command is used as an event to indicate the that a trigger level was
  *      reached.
  * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
- *      and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed
- *      by %NL80211_ATTR_IFINDEX) shall operate on.
+ *      and the attributes determining channel width) the given interface
+ *      (identifed by %NL80211_ATTR_IFINDEX) shall operate on.
  *      In case multiple channels are supported by the device, the mechanism
  *      with which it switches channels is implementation-defined.
  *      When a monitor interface is given, it can only switch channel while
@@ -526,6 +525,12 @@
  *      of PMKSA caching dandidates.
  *
  * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
+ *      In addition, this can be used as an event to request userspace to take
+ *      actions on TDLS links (set up a new link or tear down an existing one).
+ *      In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested
+ *      operation, %NL80211_ATTR_MAC contains the peer MAC address, and
+ *      %NL80211_ATTR_REASON_CODE the reason code to be used (only with
+ *      %NL80211_TDLS_TEARDOWN).
  * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
  *
  * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
@@ -562,8 +567,8 @@
  *
  * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
  *      independently of the userspace SME, send this event indicating
- *      %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
- *      %NL80211_ATTR_WIPHY_CHANNEL_TYPE.
+ *      %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the
+ *      attributes determining channel width.
  *
  * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
  *      its %NL80211_ATTR_WDEV identifier. It must have been created with
@@ -578,6 +583,9 @@
  *      station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON
  *      is used for this.
  *
+ * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames
+ *      for IBSS or MESH vif.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -726,6 +734,8 @@ enum nl80211_commands {
 
         NL80211_CMD_CONN_FAILED,
 
+        NL80211_CMD_SET_MCAST_RATE,
+
         /* add new commands above here */
 
         /* used to define NL80211_CMD_MAX below */
@@ -762,14 +772,26 @@ enum nl80211_commands {
  *      /sys/class/ieee80211/<phyname>/index
  * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
  * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
- * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
+ * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz,
+ *      defines the channel together with the (deprecated)
+ *      %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes
+ *      %NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1
+ *      and %NL80211_ATTR_CENTER_FREQ2
+ * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values
+ *      of &enum nl80211_chan_width, describing the channel width. See the
+ *      documentation of the enum for more information.
+ * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the
+ *      channel, used for anything but 20 MHz bandwidth
+ * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the
+ *      channel, used only for 80+80 MHz bandwidth
  * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
- *      if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
+ *      if HT20 or HT40 are to be used (i.e., HT disabled if not included):
  *      NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
  *              this attribute)
  *      NL80211_CHAN_HT20 = HT20 only
  *      NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
  *      NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
+ *      This attribute is now deprecated.
  * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
  *      less than or equal to the RTS threshold; allowed range: 1..255;
  *      dot11ShortRetryLimit; u8
@@ -1544,6 +1566,10 @@ enum nl80211_attrs {
 
         NL80211_ATTR_SCAN_FLAGS,
 
+        NL80211_ATTR_CHANNEL_WIDTH,
+        NL80211_ATTR_CENTER_FREQ1,
+        NL80211_ATTR_CENTER_FREQ2,
+
         /* add attributes here, update the policy in nl80211.c */
 
         __NL80211_ATTR_AFTER_LAST,
@@ -1708,10 +1734,15 @@ struct nl80211_sta_flag_update {
  * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
  * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
  * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
- * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
+ * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate
  * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
  * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s)
  * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
+ * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)
+ * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)
+ * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate
+ * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate
+ * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
  */
 enum nl80211_rate_info {
@@ -1721,6 +1752,11 @@ enum nl80211_rate_info {
         NL80211_RATE_INFO_40_MHZ_WIDTH,
         NL80211_RATE_INFO_SHORT_GI,
         NL80211_RATE_INFO_BITRATE32,
+        NL80211_RATE_INFO_VHT_MCS,
+        NL80211_RATE_INFO_VHT_NSS,
+        NL80211_RATE_INFO_80_MHZ_WIDTH,
+        NL80211_RATE_INFO_80P80_MHZ_WIDTH,
+        NL80211_RATE_INFO_160_MHZ_WIDTH,
 
         /* keep last */
         __NL80211_RATE_INFO_AFTER_LAST,
@@ -2429,6 +2465,15 @@ enum nl80211_ac {
 #define NL80211_TXQ_Q_BE        NL80211_AC_BE
 #define NL80211_TXQ_Q_BK        NL80211_AC_BK
 
+/**
+ * enum nl80211_channel_type - channel type
+ * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel
+ * @NL80211_CHAN_HT20: 20 MHz HT channel
+ * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel
+ *      below the control channel
+ * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel
+ *      above the control channel
+ */
 enum nl80211_channel_type {
         NL80211_CHAN_NO_HT,
         NL80211_CHAN_HT20,
@@ -2437,6 +2482,32 @@ enum nl80211_channel_type {
 };
 
 /**
+ * enum nl80211_chan_width - channel width definitions
+ *
+ * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH
+ * attribute.
+ *
+ * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel
+ * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel
+ * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
+ *      attribute must be provided as well
+ * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
+ *      attribute must be provided as well
+ * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
+ *      and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well
+ * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
+ *      attribute must be provided as well
+ */
+enum nl80211_chan_width {
+        NL80211_CHAN_WIDTH_20_NOHT,
+        NL80211_CHAN_WIDTH_20,
+        NL80211_CHAN_WIDTH_40,
+        NL80211_CHAN_WIDTH_80,
+        NL80211_CHAN_WIDTH_80P80,
+        NL80211_CHAN_WIDTH_160,
+};
+
+/**
  * enum nl80211_bss - netlink attributes for a BSS
  *
  * @__NL80211_BSS_INVALID: invalid
@@ -3051,6 +3122,10 @@ enum nl80211_ap_sme_features {
  * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan
  * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported
  * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif
+ * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting
+ * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform
+ *      OBSS scans and generate 20/40 BSS coex reports. This flag is used only
+ *      for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied.
  */
 enum nl80211_feature_flags {
         NL80211_FEATURE_SK_TX_STATUS                    = 1 << 0,
@@ -3062,6 +3137,8 @@ enum nl80211_feature_flags {
         NL80211_FEATURE_LOW_PRIORITY_SCAN               = 1 << 6,
         NL80211_FEATURE_SCAN_FLUSH                      = 1 << 7,
         NL80211_FEATURE_AP_SCAN                         = 1 << 8,
+        NL80211_FEATURE_VIF_TXPOWER                     = 1 << 9,
+        NL80211_FEATURE_NEED_OBSS_SCAN                  = 1 << 10,
 };
 
 /**