aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux
diff options
context:
space:
mode:
authorOlof Johansson <olof@lixom.net>2012-09-16 23:12:26 -0400
committerOlof Johansson <olof@lixom.net>2012-09-16 23:13:04 -0400
commitf4936639bc4a75218b5598ff69c52b9a8dd7f23d (patch)
tree9c08fc81cb3d3e658ca7f8dc20a949496d9e6130 /include/linux
parentd1226e8f98f130918265fb5b4dddcb60b783eb34 (diff)
parent11964f53eb4d9ce59a058be9999d9cfcb1ced878 (diff)
Merge tag 'omap-devel-am33xx-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
From Tony Lindgren: From Paul Walmsley <paul@pwsan.com>: AM33xx hwmod data and miscellaneous clock and hwmod fixes. AM33xx should now boot on mainline after this is applied, according to Vaibhav. (The shortlog makes no sense here since it contains mostly the dependent cleanups that are part of the preceding branches). Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/Kbuild4
-rw-r--r--include/linux/amba/serial.h1
-rw-r--r--include/linux/cd1400.h292
-rw-r--r--include/linux/cdk.h486
-rw-r--r--include/linux/comstats.h119
-rw-r--r--include/linux/generic_serial.h35
-rw-r--r--include/linux/i2c/twl.h3
-rw-r--r--include/linux/istallion.h123
-rw-r--r--include/linux/kbd_kern.h13
-rw-r--r--include/linux/mfd/twl6040.h1
-rw-r--r--include/linux/omapfb.h7
-rw-r--r--include/linux/platform_data/gpio-omap.h217
-rw-r--r--include/linux/platform_data/max310x.h67
-rw-r--r--include/linux/platform_data/omap1_bl.h11
-rw-r--r--include/linux/platform_data/sccnxp.h93
-rw-r--r--include/linux/sc26198.h533
-rw-r--r--include/linux/serial.h81
-rw-r--r--include/linux/serial167.h157
-rw-r--r--include/linux/serial_8250.h33
-rw-r--r--include/linux/serial_core.h4
-rw-r--r--include/linux/serial_reg.h4
-rw-r--r--include/linux/stallion.h147
-rw-r--r--include/linux/tty.h92
-rw-r--r--include/linux/tty_driver.h47
-rw-r--r--include/linux/tty_flags.h78
25 files changed, 605 insertions, 2043 deletions
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index fa217607c582..c57e064666e4 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -84,7 +84,6 @@ header-y += capability.h
84header-y += capi.h 84header-y += capi.h
85header-y += cciss_defs.h 85header-y += cciss_defs.h
86header-y += cciss_ioctl.h 86header-y += cciss_ioctl.h
87header-y += cdk.h
88header-y += cdrom.h 87header-y += cdrom.h
89header-y += cgroupstats.h 88header-y += cgroupstats.h
90header-y += chio.h 89header-y += chio.h
@@ -93,7 +92,6 @@ header-y += cn_proc.h
93header-y += coda.h 92header-y += coda.h
94header-y += coda_psdev.h 93header-y += coda_psdev.h
95header-y += coff.h 94header-y += coff.h
96header-y += comstats.h
97header-y += connector.h 95header-y += connector.h
98header-y += const.h 96header-y += const.h
99header-y += cramfs_fs.h 97header-y += cramfs_fs.h
@@ -140,7 +138,6 @@ header-y += fuse.h
140header-y += futex.h 138header-y += futex.h
141header-y += gameport.h 139header-y += gameport.h
142header-y += gen_stats.h 140header-y += gen_stats.h
143header-y += generic_serial.h
144header-y += genetlink.h 141header-y += genetlink.h
145header-y += gfs2_ondisk.h 142header-y += gfs2_ondisk.h
146header-y += gigaset_dev.h 143header-y += gigaset_dev.h
@@ -372,6 +369,7 @@ header-y += tipc.h
372header-y += tipc_config.h 369header-y += tipc_config.h
373header-y += toshiba.h 370header-y += toshiba.h
374header-y += tty.h 371header-y += tty.h
372header-y += tty_flags.h
375header-y += types.h 373header-y += types.h
376header-y += udf_fs_i.h 374header-y += udf_fs_i.h
377header-y += udp.h 375header-y += udp.h
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index d117b29d1062..f612c783170f 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -205,7 +205,6 @@ struct amba_pl011_data {
205 void *dma_tx_param; 205 void *dma_tx_param;
206 void (*init) (void); 206 void (*init) (void);
207 void (*exit) (void); 207 void (*exit) (void);
208 void (*reset) (void);
209}; 208};
210#endif 209#endif
211 210
diff --git a/include/linux/cd1400.h b/include/linux/cd1400.h
deleted file mode 100644
index 1dc3ab0523fd..000000000000
--- a/include/linux/cd1400.h
+++ /dev/null
@@ -1,292 +0,0 @@
1/*****************************************************************************/
2
3/*
4 * cd1400.h -- cd1400 UART hardware info.
5 *
6 * Copyright (C) 1996-1998 Stallion Technologies
7 * Copyright (C) 1994-1996 Greg Ungerer.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 */
23
24/*****************************************************************************/
25#ifndef _CD1400_H
26#define _CD1400_H
27/*****************************************************************************/
28
29/*
30 * Define the number of async ports per cd1400 uart chip.
31 */
32#define CD1400_PORTS 4
33
34/*
35 * Define the cd1400 uarts internal FIFO sizes.
36 */
37#define CD1400_TXFIFOSIZE 12
38#define CD1400_RXFIFOSIZE 12
39
40/*
41 * Local RX FIFO thresh hold level. Also define the RTS thresh hold
42 * based on the RX thresh hold.
43 */
44#define FIFO_RXTHRESHOLD 6
45#define FIFO_RTSTHRESHOLD 7
46
47/*****************************************************************************/
48
49/*
50 * Define the cd1400 register addresses. These are all the valid
51 * registers with the cd1400. Some are global, some virtual, some
52 * per port.
53 */
54#define GFRCR 0x40
55#define CAR 0x68
56#define GCR 0x4b
57#define SVRR 0x67
58#define RICR 0x44
59#define TICR 0x45
60#define MICR 0x46
61#define RIR 0x6b
62#define TIR 0x6a
63#define MIR 0x69
64#define PPR 0x7e
65
66#define RIVR 0x43
67#define TIVR 0x42
68#define MIVR 0x41
69#define TDR 0x63
70#define RDSR 0x62
71#define MISR 0x4c
72#define EOSRR 0x60
73
74#define LIVR 0x18
75#define CCR 0x05
76#define SRER 0x06
77#define COR1 0x08
78#define COR2 0x09
79#define COR3 0x0a
80#define COR4 0x1e
81#define COR5 0x1f
82#define CCSR 0x0b
83#define RDCR 0x0e
84#define SCHR1 0x1a
85#define SCHR2 0x1b
86#define SCHR3 0x1c
87#define SCHR4 0x1d
88#define SCRL 0x22
89#define SCRH 0x23
90#define LNC 0x24
91#define MCOR1 0x15
92#define MCOR2 0x16
93#define RTPR 0x21
94#define MSVR1 0x6c
95#define MSVR2 0x6d
96#define PSVR 0x6f
97#define RBPR 0x78
98#define RCOR 0x7c
99#define TBPR 0x72
100#define TCOR 0x76
101
102/*****************************************************************************/
103
104/*
105 * Define the set of baud rate clock divisors.
106 */
107#define CD1400_CLK0 8
108#define CD1400_CLK1 32
109#define CD1400_CLK2 128
110#define CD1400_CLK3 512
111#define CD1400_CLK4 2048
112
113#define CD1400_NUMCLKS 5
114
115/*****************************************************************************/
116
117/*
118 * Define the clock pre-scalar value to be a 5 ms clock. This should be
119 * OK for now. It would probably be better to make it 10 ms, but we
120 * can't fit that divisor into 8 bits!
121 */
122#define PPR_SCALAR 244
123
124/*****************************************************************************/
125
126/*
127 * Define values used to set character size options.
128 */
129#define COR1_CHL5 0x00
130#define COR1_CHL6 0x01
131#define COR1_CHL7 0x02
132#define COR1_CHL8 0x03
133
134/*
135 * Define values used to set the number of stop bits.
136 */
137#define COR1_STOP1 0x00
138#define COR1_STOP15 0x04
139#define COR1_STOP2 0x08
140
141/*
142 * Define values used to set the parity scheme in use.
143 */
144#define COR1_PARNONE 0x00
145#define COR1_PARFORCE 0x20
146#define COR1_PARENB 0x40
147#define COR1_PARIGNORE 0x10
148
149#define COR1_PARODD 0x80
150#define COR1_PAREVEN 0x00
151
152#define COR2_IXM 0x80
153#define COR2_TXIBE 0x40
154#define COR2_ETC 0x20
155#define COR2_LLM 0x10
156#define COR2_RLM 0x08
157#define COR2_RTSAO 0x04
158#define COR2_CTSAE 0x02
159
160#define COR3_SCDRNG 0x80
161#define COR3_SCD34 0x40
162#define COR3_FCT 0x20
163#define COR3_SCD12 0x10
164
165/*
166 * Define values used by COR4.
167 */
168#define COR4_BRKINT 0x08
169#define COR4_IGNBRK 0x18
170
171/*****************************************************************************/
172
173/*
174 * Define the modem control register values.
175 * Note that the actual hardware is a little different to the conventional
176 * pin names on the cd1400.
177 */
178#define MSVR1_DTR 0x01
179#define MSVR1_DSR 0x10
180#define MSVR1_RI 0x20
181#define MSVR1_CTS 0x40
182#define MSVR1_DCD 0x80
183
184#define MSVR2_RTS 0x02
185#define MSVR2_DSR 0x10
186#define MSVR2_RI 0x20
187#define MSVR2_CTS 0x40
188#define MSVR2_DCD 0x80
189
190#define MCOR1_DCD 0x80
191#define MCOR1_CTS 0x40
192#define MCOR1_RI 0x20
193#define MCOR1_DSR 0x10
194
195#define MCOR2_DCD 0x80
196#define MCOR2_CTS 0x40
197#define MCOR2_RI 0x20
198#define MCOR2_DSR 0x10
199
200/*****************************************************************************/
201
202/*
203 * Define the bits used with the service (interrupt) enable register.
204 */
205#define SRER_NNDT 0x01
206#define SRER_TXEMPTY 0x02
207#define SRER_TXDATA 0x04
208#define SRER_RXDATA 0x10
209#define SRER_MODEM 0x80
210
211/*****************************************************************************/
212
213/*
214 * Define operational commands for the command register.
215 */
216#define CCR_RESET 0x80
217#define CCR_CORCHANGE 0x4e
218#define CCR_SENDCH 0x20
219#define CCR_CHANCTRL 0x10
220
221#define CCR_TXENABLE (CCR_CHANCTRL | 0x08)
222#define CCR_TXDISABLE (CCR_CHANCTRL | 0x04)
223#define CCR_RXENABLE (CCR_CHANCTRL | 0x02)
224#define CCR_RXDISABLE (CCR_CHANCTRL | 0x01)
225
226#define CCR_SENDSCHR1 (CCR_SENDCH | 0x01)
227#define CCR_SENDSCHR2 (CCR_SENDCH | 0x02)
228#define CCR_SENDSCHR3 (CCR_SENDCH | 0x03)
229#define CCR_SENDSCHR4 (CCR_SENDCH | 0x04)
230
231#define CCR_RESETCHAN (CCR_RESET | 0x00)
232#define CCR_RESETFULL (CCR_RESET | 0x01)
233#define CCR_TXFLUSHFIFO (CCR_RESET | 0x02)
234
235#define CCR_MAXWAIT 10000
236
237/*****************************************************************************/
238
239/*
240 * Define the valid acknowledgement types (for hw ack cycle).
241 */
242#define ACK_TYPMASK 0x07
243#define ACK_TYPTX 0x02
244#define ACK_TYPMDM 0x01
245#define ACK_TYPRXGOOD 0x03
246#define ACK_TYPRXBAD 0x07
247
248#define SVRR_RX 0x01
249#define SVRR_TX 0x02
250#define SVRR_MDM 0x04
251
252#define ST_OVERRUN 0x01
253#define ST_FRAMING 0x02
254#define ST_PARITY 0x04
255#define ST_BREAK 0x08
256#define ST_SCHAR1 0x10
257#define ST_SCHAR2 0x20
258#define ST_SCHAR3 0x30
259#define ST_SCHAR4 0x40
260#define ST_RANGE 0x70
261#define ST_SCHARMASK 0x70
262#define ST_TIMEOUT 0x80
263
264#define MISR_DCD 0x80
265#define MISR_CTS 0x40
266#define MISR_RI 0x20
267#define MISR_DSR 0x10
268
269/*****************************************************************************/
270
271/*
272 * Defines for the CCSR status register.
273 */
274#define CCSR_RXENABLED 0x80
275#define CCSR_RXFLOWON 0x40
276#define CCSR_RXFLOWOFF 0x20
277#define CCSR_TXENABLED 0x08
278#define CCSR_TXFLOWON 0x04
279#define CCSR_TXFLOWOFF 0x02
280
281/*****************************************************************************/
282
283/*
284 * Define the embedded commands.
285 */
286#define ETC_CMD 0x00
287#define ETC_STARTBREAK 0x81
288#define ETC_DELAY 0x82
289#define ETC_STOPBREAK 0x83
290
291/*****************************************************************************/
292#endif
diff --git a/include/linux/cdk.h b/include/linux/cdk.h
deleted file mode 100644
index 80093a8d4f64..000000000000
--- a/include/linux/cdk.h
+++ /dev/null
@@ -1,486 +0,0 @@
1/*****************************************************************************/
2
3/*
4 * cdk.h -- CDK interface definitions.
5 *
6 * Copyright (C) 1996-1998 Stallion Technologies
7 * Copyright (C) 1994-1996 Greg Ungerer.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 */
23
24/*****************************************************************************/
25#ifndef _CDK_H
26#define _CDK_H
27/*****************************************************************************/
28
29#pragma pack(2)
30
31/*
32 * The following set of definitions is used to communicate with the
33 * shared memory interface of the Stallion intelligent multiport serial
34 * boards. The definitions in this file are taken directly from the
35 * document titled "Generic Stackable Interface, Downloader and
36 * Communications Development Kit".
37 */
38
39/*
40 * Define the set of important shared memory addresses. These are
41 * required to initialize the board and get things started. All of these
42 * addresses are relative to the start of the shared memory.
43 */
44#define CDK_SIGADDR 0x200
45#define CDK_FEATADDR 0x280
46#define CDK_CDKADDR 0x300
47#define CDK_RDYADDR 0x262
48
49#define CDK_ALIVEMARKER 13
50
51/*
52 * On hardware power up the ROMs located on the EasyConnection 8/64 will
53 * fill out the following signature information into shared memory. This
54 * way the host system can quickly determine that the board is present
55 * and is operational.
56 */
57typedef struct cdkecpsig {
58 unsigned long magic;
59 unsigned short romver;
60 unsigned short cputype;
61 unsigned char panelid[8];
62} cdkecpsig_t;
63
64#define ECP_MAGIC 0x21504345
65
66/*
67 * On hardware power up the ROMs located on the ONboard, Stallion and
68 * Brumbys will fill out the following signature information into shared
69 * memory. This way the host system can quickly determine that the board
70 * is present and is operational.
71 */
72typedef struct cdkonbsig {
73 unsigned short magic0;
74 unsigned short magic1;
75 unsigned short magic2;
76 unsigned short magic3;
77 unsigned short romver;
78 unsigned short memoff;
79 unsigned short memseg;
80 unsigned short amask0;
81 unsigned short pic;
82 unsigned short status;
83 unsigned short btype;
84 unsigned short clkticks;
85 unsigned short clkspeed;
86 unsigned short amask1;
87 unsigned short amask2;
88} cdkonbsig_t;
89
90#define ONB_MAGIC0 0xf2a7
91#define ONB_MAGIC1 0xa149
92#define ONB_MAGIC2 0x6352
93#define ONB_MAGIC3 0xf121
94
95/*
96 * Define the feature area structure. The feature area is the set of
97 * startup parameters used by the slave image when it starts executing.
98 * They allow for the specification of buffer sizes, debug trace, etc.
99 */
100typedef struct cdkfeature {
101 unsigned long debug;
102 unsigned long banner;
103 unsigned long etype;
104 unsigned long nrdevs;
105 unsigned long brdspec;
106 unsigned long txrqsize;
107 unsigned long rxrqsize;
108 unsigned long flags;
109} cdkfeature_t;
110
111#define ETYP_DDK 0
112#define ETYP_CDK 1
113
114/*
115 * Define the CDK header structure. This is the info that the slave
116 * environment sets up after it has been downloaded and started. It
117 * essentially provides a memory map for the shared memory interface.
118 */
119typedef struct cdkhdr {
120 unsigned short command;
121 unsigned short status;
122 unsigned short port;
123 unsigned short mode;
124 unsigned long cmd_buf[14];
125 unsigned short alive_cnt;
126 unsigned short intrpt_mode;
127 unsigned char intrpt_id[8];
128 unsigned char ver_release;
129 unsigned char ver_modification;
130 unsigned char ver_fix;
131 unsigned char deadman_restart;
132 unsigned short deadman;
133 unsigned short nrdevs;
134 unsigned long memp;
135 unsigned long hostp;
136 unsigned long slavep;
137 unsigned char hostreq;
138 unsigned char slavereq;
139 unsigned char cmd_reserved[30];
140} cdkhdr_t;
141
142#define MODE_DDK 0
143#define MODE_CDK 1
144
145#define IMD_INTR 0x0
146#define IMD_PPINTR 0x1
147#define IMD_POLL 0xff
148
149/*
150 * Define the memory mapping structure. This structure is pointed to by
151 * the memp field in the stlcdkhdr struct. As many as these structures
152 * as required are laid out in shared memory to define how the rest of
153 * shared memory is divided up. There will be one for each port.
154 */
155typedef struct cdkmem {
156 unsigned short dtype;
157 unsigned long offset;
158} cdkmem_t;
159
160#define TYP_UNDEFINED 0x0
161#define TYP_ASYNCTRL 0x1
162#define TYP_ASYNC 0x20
163#define TYP_PARALLEL 0x40
164#define TYP_SYNCX21 0x60
165
166/*****************************************************************************/
167
168/*
169 * Following is a set of defines and structures used to actually deal
170 * with the serial ports on the board. Firstly is the set of commands
171 * that can be applied to ports.
172 */
173#define ASYCMD (((unsigned long) 'a') << 8)
174
175#define A_NULL (ASYCMD | 0)
176#define A_FLUSH (ASYCMD | 1)
177#define A_BREAK (ASYCMD | 2)
178#define A_GETPORT (ASYCMD | 3)
179#define A_SETPORT (ASYCMD | 4)
180#define A_SETPORTF (ASYCMD | 5)
181#define A_SETPORTFTX (ASYCMD | 6)
182#define A_SETPORTFRX (ASYCMD | 7)
183#define A_GETSIGNALS (ASYCMD | 8)
184#define A_SETSIGNALS (ASYCMD | 9)
185#define A_SETSIGNALSF (ASYCMD | 10)
186#define A_SETSIGNALSFTX (ASYCMD | 11)
187#define A_SETSIGNALSFRX (ASYCMD | 12)
188#define A_GETNOTIFY (ASYCMD | 13)
189#define A_SETNOTIFY (ASYCMD | 14)
190#define A_NOTIFY (ASYCMD | 15)
191#define A_PORTCTRL (ASYCMD | 16)
192#define A_GETSTATS (ASYCMD | 17)
193#define A_RQSTATE (ASYCMD | 18)
194#define A_FLOWSTATE (ASYCMD | 19)
195#define A_CLEARSTATS (ASYCMD | 20)
196
197/*
198 * Define those arguments used for simple commands.
199 */
200#define FLUSHRX 0x1
201#define FLUSHTX 0x2
202
203#define BREAKON -1
204#define BREAKOFF -2
205
206/*
207 * Define the port setting structure, and all those defines that go along
208 * with it. Basically this structure defines the characteristics of this
209 * port: baud rate, chars, parity, input/output char cooking etc.
210 */
211typedef struct asyport {
212 unsigned long baudout;
213 unsigned long baudin;
214 unsigned long iflag;
215 unsigned long oflag;
216 unsigned long lflag;
217 unsigned long pflag;
218 unsigned long flow;
219 unsigned long spare1;
220 unsigned short vtime;
221 unsigned short vmin;
222 unsigned short txlo;
223 unsigned short txhi;
224 unsigned short rxlo;
225 unsigned short rxhi;
226 unsigned short rxhog;
227 unsigned short spare2;
228 unsigned char csize;
229 unsigned char stopbs;
230 unsigned char parity;
231 unsigned char stopin;
232 unsigned char startin;
233 unsigned char stopout;
234 unsigned char startout;
235 unsigned char parmark;
236 unsigned char brkmark;
237 unsigned char cc[11];
238} asyport_t;
239
240#define PT_STOP1 0x0
241#define PT_STOP15 0x1
242#define PT_STOP2 0x2
243
244#define PT_NOPARITY 0x0
245#define PT_ODDPARITY 0x1
246#define PT_EVENPARITY 0x2
247#define PT_MARKPARITY 0x3
248#define PT_SPACEPARITY 0x4
249
250#define F_NONE 0x0
251#define F_IXON 0x1
252#define F_IXOFF 0x2
253#define F_IXANY 0x4
254#define F_IOXANY 0x8
255#define F_RTSFLOW 0x10
256#define F_CTSFLOW 0x20
257#define F_DTRFLOW 0x40
258#define F_DCDFLOW 0x80
259#define F_DSROFLOW 0x100
260#define F_DSRIFLOW 0x200
261
262#define FI_NORX 0x1
263#define FI_RAW 0x2
264#define FI_ISTRIP 0x4
265#define FI_UCLC 0x8
266#define FI_INLCR 0x10
267#define FI_ICRNL 0x20
268#define FI_IGNCR 0x40
269#define FI_IGNBREAK 0x80
270#define FI_DSCRDBREAK 0x100
271#define FI_1MARKBREAK 0x200
272#define FI_2MARKBREAK 0x400
273#define FI_XCHNGBREAK 0x800
274#define FI_IGNRXERRS 0x1000
275#define FI_DSCDRXERRS 0x2000
276#define FI_1MARKRXERRS 0x4000
277#define FI_2MARKRXERRS 0x8000
278#define FI_XCHNGRXERRS 0x10000
279#define FI_DSCRDNULL 0x20000
280
281#define FO_OLCUC 0x1
282#define FO_ONLCR 0x2
283#define FO_OOCRNL 0x4
284#define FO_ONOCR 0x8
285#define FO_ONLRET 0x10
286#define FO_ONL 0x20
287#define FO_OBS 0x40
288#define FO_OVT 0x80
289#define FO_OFF 0x100
290#define FO_OTAB1 0x200
291#define FO_OTAB2 0x400
292#define FO_OTAB3 0x800
293#define FO_OCR1 0x1000
294#define FO_OCR2 0x2000
295#define FO_OCR3 0x4000
296#define FO_OFILL 0x8000
297#define FO_ODELL 0x10000
298
299#define P_RTSLOCK 0x1
300#define P_CTSLOCK 0x2
301#define P_MAPRTS 0x4
302#define P_MAPCTS 0x8
303#define P_LOOPBACK 0x10
304#define P_DTRFOLLOW 0x20
305#define P_FAKEDCD 0x40
306
307#define P_RXIMIN 0x10000
308#define P_RXITIME 0x20000
309#define P_RXTHOLD 0x40000
310
311/*
312 * Define a structure to communicate serial port signal and data state
313 * information.
314 */
315typedef struct asysigs {
316 unsigned long data;
317 unsigned long signal;
318 unsigned long sigvalue;
319} asysigs_t;
320
321#define DT_TXBUSY 0x1
322#define DT_TXEMPTY 0x2
323#define DT_TXLOW 0x4
324#define DT_TXHIGH 0x8
325#define DT_TXFULL 0x10
326#define DT_TXHOG 0x20
327#define DT_TXFLOWED 0x40
328#define DT_TXBREAK 0x80
329
330#define DT_RXBUSY 0x100
331#define DT_RXEMPTY 0x200
332#define DT_RXLOW 0x400
333#define DT_RXHIGH 0x800
334#define DT_RXFULL 0x1000
335#define DT_RXHOG 0x2000
336#define DT_RXFLOWED 0x4000
337#define DT_RXBREAK 0x8000
338
339#define SG_DTR 0x1
340#define SG_DCD 0x2
341#define SG_RTS 0x4
342#define SG_CTS 0x8
343#define SG_DSR 0x10
344#define SG_RI 0x20
345
346/*
347 * Define the notification setting structure. This is used to tell the
348 * port what events we want to be informed about. Fields here use the
349 * same defines as for the asysigs structure above.
350 */
351typedef struct asynotify {
352 unsigned long ctrl;
353 unsigned long data;
354 unsigned long signal;
355 unsigned long sigvalue;
356} asynotify_t;
357
358/*
359 * Define the port control structure. It is used to do fine grain
360 * control operations on the port.
361 */
362typedef struct {
363 unsigned long rxctrl;
364 unsigned long txctrl;
365 char rximdch;
366 char tximdch;
367 char spare1;
368 char spare2;
369} asyctrl_t;
370
371#define CT_ENABLE 0x1
372#define CT_DISABLE 0x2
373#define CT_STOP 0x4
374#define CT_START 0x8
375#define CT_STARTFLOW 0x10
376#define CT_STOPFLOW 0x20
377#define CT_SENDCHR 0x40
378
379/*
380 * Define the stats structure kept for each port. This is a useful set
381 * of data collected for each port on the slave. The A_GETSTATS command
382 * is used to retrieve this data from the slave.
383 */
384typedef struct asystats {
385 unsigned long opens;
386 unsigned long txchars;
387 unsigned long rxchars;
388 unsigned long txringq;
389 unsigned long rxringq;
390 unsigned long txmsgs;
391 unsigned long rxmsgs;
392 unsigned long txflushes;
393 unsigned long rxflushes;
394 unsigned long overruns;
395 unsigned long framing;
396 unsigned long parity;
397 unsigned long ringover;
398 unsigned long lost;
399 unsigned long rxstart;
400 unsigned long rxstop;
401 unsigned long txstart;
402 unsigned long txstop;
403 unsigned long dcdcnt;
404 unsigned long dtrcnt;
405 unsigned long ctscnt;
406 unsigned long rtscnt;
407 unsigned long dsrcnt;
408 unsigned long ricnt;
409 unsigned long txbreaks;
410 unsigned long rxbreaks;
411 unsigned long signals;
412 unsigned long state;
413 unsigned long hwid;
414} asystats_t;
415
416/*****************************************************************************/
417
418/*
419 * All command and control communication with a device on the slave is
420 * via a control block in shared memory. Each device has its own control
421 * block, defined by the following structure. The control block allows
422 * the host to open, close and control the device on the slave.
423 */
424typedef struct cdkctrl {
425 unsigned char open;
426 unsigned char close;
427 unsigned long openarg;
428 unsigned long closearg;
429 unsigned long cmd;
430 unsigned long status;
431 unsigned long args[32];
432} cdkctrl_t;
433
434/*
435 * Each device on the slave passes data to and from the host via a ring
436 * queue in shared memory. Define a ring queue structure to hold the
437 * vital information about each ring queue. Two ring queues will be
438 * allocated for each port, one for receive data and one for transmit
439 * data.
440 */
441typedef struct cdkasyrq {
442 unsigned long offset;
443 unsigned short size;
444 unsigned short head;
445 unsigned short tail;
446} cdkasyrq_t;
447
448/*
449 * Each asynchronous port is defined in shared memory by the following
450 * structure. It contains a control block to command a device, and also
451 * the necessary data channel information as well.
452 */
453typedef struct cdkasy {
454 cdkctrl_t ctrl;
455 unsigned short notify;
456 asynotify_t changed;
457 unsigned short receive;
458 cdkasyrq_t rxq;
459 unsigned short transmit;
460 cdkasyrq_t txq;
461} cdkasy_t;
462
463#pragma pack()
464
465/*****************************************************************************/
466
467/*
468 * Define the set of ioctls used by the driver to do special things
469 * to the board. These include interrupting it, and initializing
470 * the driver after board startup and shutdown.
471 */
472#include <linux/ioctl.h>
473
474#define STL_BINTR _IO('s',20)
475#define STL_BSTART _IO('s',21)
476#define STL_BSTOP _IO('s',22)
477#define STL_BRESET _IO('s',23)
478
479/*
480 * Define a set of ioctl extensions, used to get at special stuff.
481 */
482#define STL_GETPFLAG _IO('s',80)
483#define STL_SETPFLAG _IO('s',81)
484
485/*****************************************************************************/
486#endif
diff --git a/include/linux/comstats.h b/include/linux/comstats.h
deleted file mode 100644
index 3f5ea8e8026d..000000000000
--- a/include/linux/comstats.h
+++ /dev/null
@@ -1,119 +0,0 @@
1/*****************************************************************************/
2
3/*
4 * comstats.h -- Serial Port Stats.
5 *
6 * Copyright (C) 1996-1998 Stallion Technologies
7 * Copyright (C) 1994-1996 Greg Ungerer.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 */
23
24/*****************************************************************************/
25#ifndef _COMSTATS_H
26#define _COMSTATS_H
27/*****************************************************************************/
28
29/*
30 * Serial port stats structure. The structure itself is UART
31 * independent, but some fields may be UART/driver specific (for
32 * example state).
33 */
34
35typedef struct {
36 unsigned long brd;
37 unsigned long panel;
38 unsigned long port;
39 unsigned long hwid;
40 unsigned long type;
41 unsigned long txtotal;
42 unsigned long rxtotal;
43 unsigned long txbuffered;
44 unsigned long rxbuffered;
45 unsigned long rxoverrun;
46 unsigned long rxparity;
47 unsigned long rxframing;
48 unsigned long rxlost;
49 unsigned long txbreaks;
50 unsigned long rxbreaks;
51 unsigned long txxon;
52 unsigned long txxoff;
53 unsigned long rxxon;
54 unsigned long rxxoff;
55 unsigned long txctson;
56 unsigned long txctsoff;
57 unsigned long rxrtson;
58 unsigned long rxrtsoff;
59 unsigned long modem;
60 unsigned long state;
61 unsigned long flags;
62 unsigned long ttystate;
63 unsigned long cflags;
64 unsigned long iflags;
65 unsigned long oflags;
66 unsigned long lflags;
67 unsigned long signals;
68} comstats_t;
69
70
71/*
72 * Board stats structure. Returns useful info about the board.
73 */
74
75#define COM_MAXPANELS 8
76
77typedef struct {
78 unsigned long panel;
79 unsigned long type;
80 unsigned long hwid;
81 unsigned long nrports;
82} companel_t;
83
84typedef struct {
85 unsigned long brd;
86 unsigned long type;
87 unsigned long hwid;
88 unsigned long state;
89 unsigned long ioaddr;
90 unsigned long ioaddr2;
91 unsigned long memaddr;
92 unsigned long irq;
93 unsigned long nrpanels;
94 unsigned long nrports;
95 companel_t panels[COM_MAXPANELS];
96} combrd_t;
97
98
99/*
100 * Define the ioctl operations for stats stuff.
101 */
102#include <linux/ioctl.h>
103
104#define COM_GETPORTSTATS _IO('c',30)
105#define COM_CLRPORTSTATS _IO('c',31)
106#define COM_GETBRDSTATS _IO('c',32)
107
108
109/*
110 * Define the set of ioctls that give user level access to the
111 * private port, panel and board structures. The argument required
112 * will be driver dependent!
113 */
114#define COM_READPORT _IO('c',40)
115#define COM_READBOARD _IO('c',41)
116#define COM_READPANEL _IO('c',42)
117
118/*****************************************************************************/
119#endif
diff --git a/include/linux/generic_serial.h b/include/linux/generic_serial.h
deleted file mode 100644
index 79b3eb37243a..000000000000
--- a/include/linux/generic_serial.h
+++ /dev/null
@@ -1,35 +0,0 @@
1/*
2 * generic_serial.h
3 *
4 * Copyright (C) 1998 R.E.Wolff@BitWizard.nl
5 *
6 * written for the SX serial driver.
7 *
8 * Version 0.1 -- December, 1998.
9 */
10
11#ifndef GENERIC_SERIAL_H
12#define GENERIC_SERIAL_H
13
14#warning Use of this header is deprecated.
15#warning Since nobody sets the constants defined here for you, you should not, in any case, use them. Including the header is thus pointless.
16
17/* Flags */
18/* Warning: serial.h defines some ASYNC_ flags, they say they are "only"
19 used in serial.c, but they are also used in all other serial drivers.
20 Make sure they don't clash with these here... */
21#define GS_TX_INTEN 0x00800000
22#define GS_RX_INTEN 0x00400000
23#define GS_ACTIVE 0x00200000
24
25#define GS_TYPE_NORMAL 1
26
27#define GS_DEBUG_FLUSH 0x00000001
28#define GS_DEBUG_BTR 0x00000002
29#define GS_DEBUG_TERMIOS 0x00000004
30#define GS_DEBUG_STUFF 0x00000008
31#define GS_DEBUG_CLOSE 0x00000010
32#define GS_DEBUG_FLOW 0x00000020
33#define GS_DEBUG_WRITE 0x00000040
34
35#endif
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 7ea898c55a60..a12a38107c1a 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -561,9 +561,6 @@ struct twl4030_bci_platform_data {
561 561
562/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */ 562/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */
563struct twl4030_gpio_platform_data { 563struct twl4030_gpio_platform_data {
564 int gpio_base;
565 unsigned irq_base, irq_end;
566
567 /* package the two LED signals as output-only GPIOs? */ 564 /* package the two LED signals as output-only GPIOs? */
568 bool use_leds; 565 bool use_leds;
569 566
diff --git a/include/linux/istallion.h b/include/linux/istallion.h
deleted file mode 100644
index ad700a60c158..000000000000
--- a/include/linux/istallion.h
+++ /dev/null
@@ -1,123 +0,0 @@
1/*****************************************************************************/
2
3/*
4 * istallion.h -- stallion intelligent multiport serial driver.
5 *
6 * Copyright (C) 1996-1998 Stallion Technologies
7 * Copyright (C) 1994-1996 Greg Ungerer.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 */
23
24/*****************************************************************************/
25#ifndef _ISTALLION_H
26#define _ISTALLION_H
27/*****************************************************************************/
28
29/*
30 * Define important driver constants here.
31 */
32#define STL_MAXBRDS 4
33#define STL_MAXPANELS 4
34#define STL_MAXPORTS 64
35#define STL_MAXCHANS (STL_MAXPORTS + 1)
36#define STL_MAXDEVS (STL_MAXBRDS * STL_MAXPORTS)
37
38
39/*
40 * Define a set of structures to hold all the board/panel/port info
41 * for our ports. These will be dynamically allocated as required at
42 * driver initialization time.
43 */
44
45/*
46 * Port and board structures to hold status info about each object.
47 * The board structure contains pointers to structures for each port
48 * connected to it. Panels are not distinguished here, since
49 * communication with the slave board will always be on a per port
50 * basis.
51 */
52struct stliport {
53 unsigned long magic;
54 struct tty_port port;
55 unsigned int portnr;
56 unsigned int panelnr;
57 unsigned int brdnr;
58 unsigned long state;
59 unsigned int devnr;
60 int baud_base;
61 int custom_divisor;
62 int closing_wait;
63 int rc;
64 int argsize;
65 void *argp;
66 unsigned int rxmarkmsk;
67 wait_queue_head_t raw_wait;
68 struct asysigs asig;
69 unsigned long addr;
70 unsigned long rxoffset;
71 unsigned long txoffset;
72 unsigned long sigs;
73 unsigned long pflag;
74 unsigned int rxsize;
75 unsigned int txsize;
76 unsigned char reqbit;
77 unsigned char portidx;
78 unsigned char portbit;
79};
80
81/*
82 * Use a structure of function pointers to do board level operations.
83 * These include, enable/disable, paging shared memory, interrupting, etc.
84 */
85struct stlibrd {
86 unsigned long magic;
87 unsigned int brdnr;
88 unsigned int brdtype;
89 unsigned long state;
90 unsigned int nrpanels;
91 unsigned int nrports;
92 unsigned int nrdevs;
93 unsigned int iobase;
94 int iosize;
95 unsigned long memaddr;
96 void __iomem *membase;
97 unsigned long memsize;
98 int pagesize;
99 int hostoffset;
100 int slaveoffset;
101 int bitsize;
102 int enabval;
103 unsigned int panels[STL_MAXPANELS];
104 int panelids[STL_MAXPANELS];
105 void (*init)(struct stlibrd *brdp);
106 void (*enable)(struct stlibrd *brdp);
107 void (*reenable)(struct stlibrd *brdp);
108 void (*disable)(struct stlibrd *brdp);
109 void __iomem *(*getmemptr)(struct stlibrd *brdp, unsigned long offset, int line);
110 void (*intr)(struct stlibrd *brdp);
111 void (*reset)(struct stlibrd *brdp);
112 struct stliport *ports[STL_MAXPORTS];
113};
114
115
116/*
117 * Define MAGIC numbers used for above structures.
118 */
119#define STLI_PORTMAGIC 0xe671c7a1
120#define STLI_BOARDMAGIC 0x4bc6c825
121
122/*****************************************************************************/
123#endif
diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h
index daf4a3a40ee0..b7c8cdc1d422 100644
--- a/include/linux/kbd_kern.h
+++ b/include/linux/kbd_kern.h
@@ -65,7 +65,6 @@ struct kbd_struct {
65 65
66extern int kbd_init(void); 66extern int kbd_init(void);
67 67
68extern unsigned char getledstate(void);
69extern void setledstate(struct kbd_struct *kbd, unsigned int led); 68extern void setledstate(struct kbd_struct *kbd, unsigned int led);
70 69
71extern int do_poke_blanked_console; 70extern int do_poke_blanked_console;
@@ -145,16 +144,4 @@ void compute_shiftstate(void);
145 144
146extern unsigned int keymap_count; 145extern unsigned int keymap_count;
147 146
148/* console.c */
149
150static inline void con_schedule_flip(struct tty_struct *t)
151{
152 unsigned long flags;
153 spin_lock_irqsave(&t->buf.lock, flags);
154 if (t->buf.tail != NULL)
155 t->buf.tail->commit = t->buf.tail->used;
156 spin_unlock_irqrestore(&t->buf.lock, flags);
157 schedule_work(&t->buf.work);
158}
159
160#endif 147#endif
diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
index eaad49f7c130..ba43d4806b83 100644
--- a/include/linux/mfd/twl6040.h
+++ b/include/linux/mfd/twl6040.h
@@ -194,7 +194,6 @@ struct twl6040_vibra_data {
194 194
195struct twl6040_platform_data { 195struct twl6040_platform_data {
196 int audpwron_gpio; /* audio power-on gpio */ 196 int audpwron_gpio; /* audio power-on gpio */
197 unsigned int irq_base;
198 197
199 struct twl6040_codec_data *codec; 198 struct twl6040_codec_data *codec;
200 struct twl6040_vibra_data *vibra; 199 struct twl6040_vibra_data *vibra;
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 4ff57e81051d..85af8184691a 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -220,7 +220,12 @@ struct omapfb_display_info {
220 220
221#ifdef __KERNEL__ 221#ifdef __KERNEL__
222 222
223#include <plat/board.h> 223struct omap_lcd_config {
224 char panel_name[16];
225 char ctrl_name[16];
226 s16 nreset_gpio;
227 u8 data_lines;
228};
224 229
225struct omapfb_platform_data { 230struct omapfb_platform_data {
226 struct omap_lcd_config lcd; 231 struct omap_lcd_config lcd;
diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h
new file mode 100644
index 000000000000..e8741c2678d5
--- /dev/null
+++ b/include/linux/platform_data/gpio-omap.h
@@ -0,0 +1,217 @@
1/*
2 * OMAP GPIO handling defines and functions
3 *
4 * Copyright (C) 2003-2005 Nokia Corporation
5 *
6 * Written by Juha Yrjölä <juha.yrjola@nokia.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 *
22 */
23
24#ifndef __ASM_ARCH_OMAP_GPIO_H
25#define __ASM_ARCH_OMAP_GPIO_H
26
27#include <linux/io.h>
28#include <linux/platform_device.h>
29#include <mach/irqs.h>
30
31#define OMAP1_MPUIO_BASE 0xfffb5000
32
33/*
34 * These are the omap15xx/16xx offsets. The omap7xx offset are
35 * OMAP_MPUIO_ / 2 offsets below.
36 */
37#define OMAP_MPUIO_INPUT_LATCH 0x00
38#define OMAP_MPUIO_OUTPUT 0x04
39#define OMAP_MPUIO_IO_CNTL 0x08
40#define OMAP_MPUIO_KBR_LATCH 0x10
41#define OMAP_MPUIO_KBC 0x14
42#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18
43#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c
44#define OMAP_MPUIO_KBD_INT 0x20
45#define OMAP_MPUIO_GPIO_INT 0x24
46#define OMAP_MPUIO_KBD_MASKIT 0x28
47#define OMAP_MPUIO_GPIO_MASKIT 0x2c
48#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30
49#define OMAP_MPUIO_LATCH 0x34
50
51#define OMAP34XX_NR_GPIOS 6
52
53/*
54 * OMAP1510 GPIO registers
55 */
56#define OMAP1510_GPIO_DATA_INPUT 0x00
57#define OMAP1510_GPIO_DATA_OUTPUT 0x04
58#define OMAP1510_GPIO_DIR_CONTROL 0x08
59#define OMAP1510_GPIO_INT_CONTROL 0x0c
60#define OMAP1510_GPIO_INT_MASK 0x10
61#define OMAP1510_GPIO_INT_STATUS 0x14
62#define OMAP1510_GPIO_PIN_CONTROL 0x18
63
64#define OMAP1510_IH_GPIO_BASE 64
65
66/*
67 * OMAP1610 specific GPIO registers
68 */
69#define OMAP1610_GPIO_REVISION 0x0000
70#define OMAP1610_GPIO_SYSCONFIG 0x0010
71#define OMAP1610_GPIO_SYSSTATUS 0x0014
72#define OMAP1610_GPIO_IRQSTATUS1 0x0018
73#define OMAP1610_GPIO_IRQENABLE1 0x001c
74#define OMAP1610_GPIO_WAKEUPENABLE 0x0028
75#define OMAP1610_GPIO_DATAIN 0x002c
76#define OMAP1610_GPIO_DATAOUT 0x0030
77#define OMAP1610_GPIO_DIRECTION 0x0034
78#define OMAP1610_GPIO_EDGE_CTRL1 0x0038
79#define OMAP1610_GPIO_EDGE_CTRL2 0x003c
80#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c
81#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8
82#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0
83#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc
84#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8
85#define OMAP1610_GPIO_SET_DATAOUT 0x00f0
86
87/*
88 * OMAP7XX specific GPIO registers
89 */
90#define OMAP7XX_GPIO_DATA_INPUT 0x00
91#define OMAP7XX_GPIO_DATA_OUTPUT 0x04
92#define OMAP7XX_GPIO_DIR_CONTROL 0x08
93#define OMAP7XX_GPIO_INT_CONTROL 0x0c
94#define OMAP7XX_GPIO_INT_MASK 0x10
95#define OMAP7XX_GPIO_INT_STATUS 0x14
96
97/*
98 * omap2+ specific GPIO registers
99 */
100#define OMAP24XX_GPIO_REVISION 0x0000
101#define OMAP24XX_GPIO_IRQSTATUS1 0x0018
102#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
103#define OMAP24XX_GPIO_IRQENABLE2 0x002c
104#define OMAP24XX_GPIO_IRQENABLE1 0x001c
105#define OMAP24XX_GPIO_WAKE_EN 0x0020
106#define OMAP24XX_GPIO_CTRL 0x0030
107#define OMAP24XX_GPIO_OE 0x0034
108#define OMAP24XX_GPIO_DATAIN 0x0038
109#define OMAP24XX_GPIO_DATAOUT 0x003c
110#define OMAP24XX_GPIO_LEVELDETECT0 0x0040
111#define OMAP24XX_GPIO_LEVELDETECT1 0x0044
112#define OMAP24XX_GPIO_RISINGDETECT 0x0048
113#define OMAP24XX_GPIO_FALLINGDETECT 0x004c
114#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050
115#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054
116#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060
117#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064
118#define OMAP24XX_GPIO_CLEARWKUENA 0x0080
119#define OMAP24XX_GPIO_SETWKUENA 0x0084
120#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090
121#define OMAP24XX_GPIO_SETDATAOUT 0x0094
122
123#define OMAP4_GPIO_REVISION 0x0000
124#define OMAP4_GPIO_EOI 0x0020
125#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024
126#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028
127#define OMAP4_GPIO_IRQSTATUS0 0x002c
128#define OMAP4_GPIO_IRQSTATUS1 0x0030
129#define OMAP4_GPIO_IRQSTATUSSET0 0x0034
130#define OMAP4_GPIO_IRQSTATUSSET1 0x0038
131#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c
132#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040
133#define OMAP4_GPIO_IRQWAKEN0 0x0044
134#define OMAP4_GPIO_IRQWAKEN1 0x0048
135#define OMAP4_GPIO_IRQENABLE1 0x011c
136#define OMAP4_GPIO_WAKE_EN 0x0120
137#define OMAP4_GPIO_IRQSTATUS2 0x0128
138#define OMAP4_GPIO_IRQENABLE2 0x012c
139#define OMAP4_GPIO_CTRL 0x0130
140#define OMAP4_GPIO_OE 0x0134
141#define OMAP4_GPIO_DATAIN 0x0138
142#define OMAP4_GPIO_DATAOUT 0x013c
143#define OMAP4_GPIO_LEVELDETECT0 0x0140
144#define OMAP4_GPIO_LEVELDETECT1 0x0144
145#define OMAP4_GPIO_RISINGDETECT 0x0148
146#define OMAP4_GPIO_FALLINGDETECT 0x014c
147#define OMAP4_GPIO_DEBOUNCENABLE 0x0150
148#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154
149#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160
150#define OMAP4_GPIO_SETIRQENABLE1 0x0164
151#define OMAP4_GPIO_CLEARWKUENA 0x0180
152#define OMAP4_GPIO_SETWKUENA 0x0184
153#define OMAP4_GPIO_CLEARDATAOUT 0x0190
154#define OMAP4_GPIO_SETDATAOUT 0x0194
155
156#define OMAP_MAX_GPIO_LINES 192
157
158#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr))
159#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES)
160
161struct omap_gpio_dev_attr {
162 int bank_width; /* GPIO bank width */
163 bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
164};
165
166struct omap_gpio_reg_offs {
167 u16 revision;
168 u16 direction;
169 u16 datain;
170 u16 dataout;
171 u16 set_dataout;
172 u16 clr_dataout;
173 u16 irqstatus;
174 u16 irqstatus2;
175 u16 irqstatus_raw0;
176 u16 irqstatus_raw1;
177 u16 irqenable;
178 u16 irqenable2;
179 u16 set_irqenable;
180 u16 clr_irqenable;
181 u16 debounce;
182 u16 debounce_en;
183 u16 ctrl;
184 u16 wkup_en;
185 u16 leveldetect0;
186 u16 leveldetect1;
187 u16 risingdetect;
188 u16 fallingdetect;
189 u16 irqctrl;
190 u16 edgectrl1;
191 u16 edgectrl2;
192 u16 pinctrl;
193
194 bool irqenable_inv;
195};
196
197struct omap_gpio_platform_data {
198 int bank_type;
199 int bank_width; /* GPIO bank width */
200 int bank_stride; /* Only needed for omap1 MPUIO */
201 bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
202 bool loses_context; /* whether the bank would ever lose context */
203 bool is_mpuio; /* whether the bank is of type MPUIO */
204 u32 non_wakeup_gpios;
205
206 struct omap_gpio_reg_offs *regs;
207
208 /* Return context loss count due to PM states changing */
209 int (*get_context_loss_count)(struct device *dev);
210};
211
212extern void omap2_gpio_prepare_for_idle(int off_mode);
213extern void omap2_gpio_resume_after_idle(void);
214extern void omap_set_gpio_debounce(int gpio, int enable);
215extern void omap_set_gpio_debounce_time(int gpio, int enable);
216
217#endif
diff --git a/include/linux/platform_data/max310x.h b/include/linux/platform_data/max310x.h
new file mode 100644
index 000000000000..91648bf5fc5c
--- /dev/null
+++ b/include/linux/platform_data/max310x.h
@@ -0,0 +1,67 @@
1/*
2 * Maxim (Dallas) MAX3107/8 serial driver
3 *
4 * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
5 *
6 * Based on max3100.c, by Christian Pellegrin <chripell@evolware.org>
7 * Based on max3110.c, by Feng Tang <feng.tang@intel.com>
8 * Based on max3107.c, by Aavamobile
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 */
15
16#ifndef _MAX310X_H_
17#define _MAX310X_H_
18
19/*
20 * Example board initialization data:
21 *
22 * static struct max310x_pdata max3107_pdata = {
23 * .driver_flags = MAX310X_EXT_CLK,
24 * .uart_flags[0] = MAX310X_ECHO_SUPRESS | MAX310X_AUTO_DIR_CTRL,
25 * .frequency = 3686400,
26 * .gpio_base = -1,
27 * };
28 *
29 * static struct spi_board_info spi_device_max3107[] = {
30 * {
31 * .modalias = "max3107",
32 * .irq = IRQ_EINT3,
33 * .bus_num = 1,
34 * .chip_select = 1,
35 * .platform_data = &max3107_pdata,
36 * },
37 * };
38 */
39
40#define MAX310X_MAX_UARTS 1
41
42/* MAX310X platform data structure */
43struct max310x_pdata {
44 /* Flags global to driver */
45 const u8 driver_flags:2;
46#define MAX310X_EXT_CLK (0x00000001) /* External clock enable */
47#define MAX310X_AUTOSLEEP (0x00000002) /* Enable AutoSleep mode */
48 /* Flags global to UART port */
49 const u8 uart_flags[MAX310X_MAX_UARTS];
50#define MAX310X_LOOPBACK (0x00000001) /* Loopback mode enable */
51#define MAX310X_ECHO_SUPRESS (0x00000002) /* Enable echo supress */
52#define MAX310X_AUTO_DIR_CTRL (0x00000004) /* Enable Auto direction
53 * control (RS-485)
54 */
55 /* Frequency (extrenal clock or crystal) */
56 const int frequency;
57 /* GPIO base number (can be negative) */
58 const int gpio_base;
59 /* Called during startup */
60 void (*init)(void);
61 /* Called before finish */
62 void (*exit)(void);
63 /* Suspend callback */
64 void (*suspend)(int do_suspend);
65};
66
67#endif
diff --git a/include/linux/platform_data/omap1_bl.h b/include/linux/platform_data/omap1_bl.h
new file mode 100644
index 000000000000..881a8e92d605
--- /dev/null
+++ b/include/linux/platform_data/omap1_bl.h
@@ -0,0 +1,11 @@
1#ifndef __OMAP1_BL_H__
2#define __OMAP1_BL_H__
3
4#include <linux/device.h>
5
6struct omap_backlight_config {
7 int default_intensity;
8 int (*set_power)(struct device *dev, int state);
9};
10
11#endif
diff --git a/include/linux/platform_data/sccnxp.h b/include/linux/platform_data/sccnxp.h
new file mode 100644
index 000000000000..7311ccd3217f
--- /dev/null
+++ b/include/linux/platform_data/sccnxp.h
@@ -0,0 +1,93 @@
1/*
2 * NXP (Philips) SCC+++(SCN+++) serial driver
3 *
4 * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
5 *
6 * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de)
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 */
13
14#ifndef __SCCNXP_H
15#define __SCCNXP_H
16
17#define SCCNXP_MAX_UARTS 2
18
19/* Output lines */
20#define LINE_OP0 1
21#define LINE_OP1 2
22#define LINE_OP2 3
23#define LINE_OP3 4
24#define LINE_OP4 5
25#define LINE_OP5 6
26#define LINE_OP6 7
27#define LINE_OP7 8
28
29/* Input lines */
30#define LINE_IP0 9
31#define LINE_IP1 10
32#define LINE_IP2 11
33#define LINE_IP3 12
34#define LINE_IP4 13
35#define LINE_IP5 14
36#define LINE_IP6 15
37
38/* Signals */
39#define DTR_OP 0 /* DTR */
40#define RTS_OP 4 /* RTS */
41#define DSR_IP 8 /* DSR */
42#define CTS_IP 12 /* CTS */
43#define DCD_IP 16 /* DCD */
44#define RNG_IP 20 /* RNG */
45
46#define DIR_OP 24 /* Special signal for control RS-485.
47 * Goes high when transmit,
48 * then goes low.
49 */
50
51/* Routing control signal 'sig' to line 'line' */
52#define MCTRL_SIG(sig, line) ((line) << (sig))
53
54/*
55 * Example board initialization data:
56 *
57 * static struct resource sc2892_resources[] = {
58 * DEFINE_RES_MEM(UART_PHYS_START, 0x10),
59 * DEFINE_RES_IRQ(IRQ_EXT2),
60 * };
61 *
62 * static struct sccnxp_pdata sc2892_info = {
63 * .frequency = 3686400,
64 * .mctrl_cfg[0] = MCTRL_SIG(DIR_OP, LINE_OP0),
65 * .mctrl_cfg[1] = MCTRL_SIG(DIR_OP, LINE_OP1),
66 * };
67 *
68 * static struct platform_device sc2892 = {
69 * .name = "sc2892",
70 * .id = -1,
71 * .resource = sc2892_resources,
72 * .num_resources = ARRAY_SIZE(sc2892_resources),
73 * .dev = {
74 * .platform_data = &sc2892_info,
75 * },
76 * };
77 */
78
79/* SCCNXP platform data structure */
80struct sccnxp_pdata {
81 /* Frequency (extrenal clock or crystal) */
82 int frequency;
83 /* Shift for A0 line */
84 const u8 reg_shift;
85 /* Modem control lines configuration */
86 const u32 mctrl_cfg[SCCNXP_MAX_UARTS];
87 /* Called during startup */
88 void (*init)(void);
89 /* Called before finish */
90 void (*exit)(void);
91};
92
93#endif
diff --git a/include/linux/sc26198.h b/include/linux/sc26198.h
deleted file mode 100644
index 7ca35abad387..000000000000
--- a/include/linux/sc26198.h
+++ /dev/null
@@ -1,533 +0,0 @@
1/*****************************************************************************/
2
3/*
4 * sc26198.h -- SC26198 UART hardware info.
5 *
6 * Copyright (C) 1995-1998 Stallion Technologies
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22
23/*****************************************************************************/
24#ifndef _SC26198_H
25#define _SC26198_H
26/*****************************************************************************/
27
28/*
29 * Define the number of async ports per sc26198 uart device.
30 */
31#define SC26198_PORTS 8
32
33/*
34 * Baud rate timing clocks. All derived from a master 14.7456 MHz clock.
35 */
36#define SC26198_MASTERCLOCK 14745600L
37#define SC26198_DCLK (SC26198_MASTERCLOCK)
38#define SC26198_CCLK (SC26198_MASTERCLOCK / 2)
39#define SC26198_BCLK (SC26198_MASTERCLOCK / 4)
40
41/*
42 * Define internal FIFO sizes for the 26198 ports.
43 */
44#define SC26198_TXFIFOSIZE 16
45#define SC26198_RXFIFOSIZE 16
46
47/*****************************************************************************/
48
49/*
50 * Global register definitions. These registers are global to each 26198
51 * device, not specific ports on it.
52 */
53#define TSTR 0x0d
54#define GCCR 0x0f
55#define ICR 0x1b
56#define WDTRCR 0x1d
57#define IVR 0x1f
58#define BRGTRUA 0x84
59#define GPOSR 0x87
60#define GPOC 0x8b
61#define UCIR 0x8c
62#define CIR 0x8c
63#define BRGTRUB 0x8d
64#define GRXFIFO 0x8e
65#define GTXFIFO 0x8e
66#define GCCR2 0x8f
67#define BRGTRLA 0x94
68#define GPOR 0x97
69#define GPOD 0x9b
70#define BRGTCR 0x9c
71#define GICR 0x9c
72#define BRGTRLB 0x9d
73#define GIBCR 0x9d
74#define GITR 0x9f
75
76/*
77 * Per port channel registers. These are the register offsets within
78 * the port address space, so need to have the port address (0 to 7)
79 * inserted in bit positions 4:6.
80 */
81#define MR0 0x00
82#define MR1 0x01
83#define IOPCR 0x02
84#define BCRBRK 0x03
85#define BCRCOS 0x04
86#define BCRX 0x06
87#define BCRA 0x07
88#define XONCR 0x08
89#define XOFFCR 0x09
90#define ARCR 0x0a
91#define RXCSR 0x0c
92#define TXCSR 0x0e
93#define MR2 0x80
94#define SR 0x81
95#define SCCR 0x81
96#define ISR 0x82
97#define IMR 0x82
98#define TXFIFO 0x83
99#define RXFIFO 0x83
100#define IPR 0x84
101#define IOPIOR 0x85
102#define XISR 0x86
103
104/*
105 * For any given port calculate the address to use to access a specified
106 * register. This is only used for unusual access, mostly this is done
107 * through the assembler access routines.
108 */
109#define SC26198_PORTREG(port,reg) ((((port) & 0x07) << 4) | (reg))
110
111/*****************************************************************************/
112
113/*
114 * Global configuration control register bit definitions.
115 */
116#define GCCR_NOACK 0x00
117#define GCCR_IVRACK 0x02
118#define GCCR_IVRCHANACK 0x04
119#define GCCR_IVRTYPCHANACK 0x06
120#define GCCR_ASYNCCYCLE 0x00
121#define GCCR_SYNCCYCLE 0x40
122
123/*****************************************************************************/
124
125/*
126 * Mode register 0 bit definitions.
127 */
128#define MR0_ADDRNONE 0x00
129#define MR0_AUTOWAKE 0x01
130#define MR0_AUTODOZE 0x02
131#define MR0_AUTOWAKEDOZE 0x03
132#define MR0_SWFNONE 0x00
133#define MR0_SWFTX 0x04
134#define MR0_SWFRX 0x08
135#define MR0_SWFRXTX 0x0c
136#define MR0_TXMASK 0x30
137#define MR0_TXEMPTY 0x00
138#define MR0_TXHIGH 0x10
139#define MR0_TXHALF 0x20
140#define MR0_TXRDY 0x00
141#define MR0_ADDRNT 0x00
142#define MR0_ADDRT 0x40
143#define MR0_SWFNT 0x00
144#define MR0_SWFT 0x80
145
146/*
147 * Mode register 1 bit definitions.
148 */
149#define MR1_CS5 0x00
150#define MR1_CS6 0x01
151#define MR1_CS7 0x02
152#define MR1_CS8 0x03
153#define MR1_PAREVEN 0x00
154#define MR1_PARODD 0x04
155#define MR1_PARENB 0x00
156#define MR1_PARFORCE 0x08
157#define MR1_PARNONE 0x10
158#define MR1_PARSPECIAL 0x18
159#define MR1_ERRCHAR 0x00
160#define MR1_ERRBLOCK 0x20
161#define MR1_ISRUNMASKED 0x00
162#define MR1_ISRMASKED 0x40
163#define MR1_AUTORTS 0x80
164
165/*
166 * Mode register 2 bit definitions.
167 */
168#define MR2_STOP1 0x00
169#define MR2_STOP15 0x01
170#define MR2_STOP2 0x02
171#define MR2_STOP916 0x03
172#define MR2_RXFIFORDY 0x00
173#define MR2_RXFIFOHALF 0x04
174#define MR2_RXFIFOHIGH 0x08
175#define MR2_RXFIFOFULL 0x0c
176#define MR2_AUTOCTS 0x10
177#define MR2_TXRTS 0x20
178#define MR2_MODENORM 0x00
179#define MR2_MODEAUTOECHO 0x40
180#define MR2_MODELOOP 0x80
181#define MR2_MODEREMECHO 0xc0
182
183/*****************************************************************************/
184
185/*
186 * Baud Rate Generator (BRG) selector values.
187 */
188#define BRG_50 0x00
189#define BRG_75 0x01
190#define BRG_150 0x02
191#define BRG_200 0x03
192#define BRG_300 0x04
193#define BRG_450 0x05
194#define BRG_600 0x06
195#define BRG_900 0x07
196#define BRG_1200 0x08
197#define BRG_1800 0x09
198#define BRG_2400 0x0a
199#define BRG_3600 0x0b
200#define BRG_4800 0x0c
201#define BRG_7200 0x0d
202#define BRG_9600 0x0e
203#define BRG_14400 0x0f
204#define BRG_19200 0x10
205#define BRG_28200 0x11
206#define BRG_38400 0x12
207#define BRG_57600 0x13
208#define BRG_115200 0x14
209#define BRG_230400 0x15
210#define BRG_GIN0 0x16
211#define BRG_GIN1 0x17
212#define BRG_CT0 0x18
213#define BRG_CT1 0x19
214#define BRG_RX2TX316 0x1b
215#define BRG_RX2TX31 0x1c
216
217#define SC26198_MAXBAUD 921600
218
219/*****************************************************************************/
220
221/*
222 * Command register command definitions.
223 */
224#define CR_NULL 0x04
225#define CR_ADDRNORMAL 0x0c
226#define CR_RXRESET 0x14
227#define CR_TXRESET 0x1c
228#define CR_CLEARRXERR 0x24
229#define CR_BREAKRESET 0x2c
230#define CR_TXSTARTBREAK 0x34
231#define CR_TXSTOPBREAK 0x3c
232#define CR_RTSON 0x44
233#define CR_RTSOFF 0x4c
234#define CR_ADDRINIT 0x5c
235#define CR_RXERRBLOCK 0x6c
236#define CR_TXSENDXON 0x84
237#define CR_TXSENDXOFF 0x8c
238#define CR_GANGXONSET 0x94
239#define CR_GANGXOFFSET 0x9c
240#define CR_GANGXONINIT 0xa4
241#define CR_GANGXOFFINIT 0xac
242#define CR_HOSTXON 0xb4
243#define CR_HOSTXOFF 0xbc
244#define CR_CANCELXOFF 0xc4
245#define CR_ADDRRESET 0xdc
246#define CR_RESETALLPORTS 0xf4
247#define CR_RESETALL 0xfc
248
249#define CR_RXENABLE 0x01
250#define CR_TXENABLE 0x02
251
252/*****************************************************************************/
253
254/*
255 * Channel status register.
256 */
257#define SR_RXRDY 0x01
258#define SR_RXFULL 0x02
259#define SR_TXRDY 0x04
260#define SR_TXEMPTY 0x08
261#define SR_RXOVERRUN 0x10
262#define SR_RXPARITY 0x20
263#define SR_RXFRAMING 0x40
264#define SR_RXBREAK 0x80
265
266#define SR_RXERRS (SR_RXPARITY | SR_RXFRAMING | SR_RXOVERRUN)
267
268/*****************************************************************************/
269
270/*
271 * Interrupt status register and interrupt mask register bit definitions.
272 */
273#define IR_TXRDY 0x01
274#define IR_RXRDY 0x02
275#define IR_RXBREAK 0x04
276#define IR_XONXOFF 0x10
277#define IR_ADDRRECOG 0x20
278#define IR_RXWATCHDOG 0x40
279#define IR_IOPORT 0x80
280
281/*****************************************************************************/
282
283/*
284 * Interrupt vector register field definitions.
285 */
286#define IVR_CHANMASK 0x07
287#define IVR_TYPEMASK 0x18
288#define IVR_CONSTMASK 0xc0
289
290#define IVR_RXDATA 0x10
291#define IVR_RXBADDATA 0x18
292#define IVR_TXDATA 0x08
293#define IVR_OTHER 0x00
294
295/*****************************************************************************/
296
297/*
298 * BRG timer control register bit definitions.
299 */
300#define BRGCTCR_DISABCLK0 0x00
301#define BRGCTCR_ENABCLK0 0x08
302#define BRGCTCR_DISABCLK1 0x00
303#define BRGCTCR_ENABCLK1 0x80
304
305#define BRGCTCR_0SCLK16 0x00
306#define BRGCTCR_0SCLK32 0x01
307#define BRGCTCR_0SCLK64 0x02
308#define BRGCTCR_0SCLK128 0x03
309#define BRGCTCR_0X1 0x04
310#define BRGCTCR_0X12 0x05
311#define BRGCTCR_0IO1A 0x06
312#define BRGCTCR_0GIN0 0x07
313
314#define BRGCTCR_1SCLK16 0x00
315#define BRGCTCR_1SCLK32 0x10
316#define BRGCTCR_1SCLK64 0x20
317#define BRGCTCR_1SCLK128 0x30
318#define BRGCTCR_1X1 0x40
319#define BRGCTCR_1X12 0x50
320#define BRGCTCR_1IO1B 0x60
321#define BRGCTCR_1GIN1 0x70
322
323/*****************************************************************************/
324
325/*
326 * Watch dog timer enable register.
327 */
328#define WDTRCR_ENABALL 0xff
329
330/*****************************************************************************/
331
332/*
333 * XON/XOFF interrupt status register.
334 */
335#define XISR_TXCHARMASK 0x03
336#define XISR_TXCHARNORMAL 0x00
337#define XISR_TXWAIT 0x01
338#define XISR_TXXOFFPEND 0x02
339#define XISR_TXXONPEND 0x03
340
341#define XISR_TXFLOWMASK 0x0c
342#define XISR_TXNORMAL 0x00
343#define XISR_TXSTOPPEND 0x04
344#define XISR_TXSTARTED 0x08
345#define XISR_TXSTOPPED 0x0c
346
347#define XISR_RXFLOWMASK 0x30
348#define XISR_RXFLOWNONE 0x00
349#define XISR_RXXONSENT 0x10
350#define XISR_RXXOFFSENT 0x20
351
352#define XISR_RXXONGOT 0x40
353#define XISR_RXXOFFGOT 0x80
354
355/*****************************************************************************/
356
357/*
358 * Current interrupt register.
359 */
360#define CIR_TYPEMASK 0xc0
361#define CIR_TYPEOTHER 0x00
362#define CIR_TYPETX 0x40
363#define CIR_TYPERXGOOD 0x80
364#define CIR_TYPERXBAD 0xc0
365
366#define CIR_RXDATA 0x80
367#define CIR_RXBADDATA 0x40
368#define CIR_TXDATA 0x40
369
370#define CIR_CHANMASK 0x07
371#define CIR_CNTMASK 0x38
372
373#define CIR_SUBTYPEMASK 0x38
374#define CIR_SUBNONE 0x00
375#define CIR_SUBCOS 0x08
376#define CIR_SUBADDR 0x10
377#define CIR_SUBXONXOFF 0x18
378#define CIR_SUBBREAK 0x28
379
380/*****************************************************************************/
381
382/*
383 * Global interrupting channel register.
384 */
385#define GICR_CHANMASK 0x07
386
387/*****************************************************************************/
388
389/*
390 * Global interrupting byte count register.
391 */
392#define GICR_COUNTMASK 0x0f
393
394/*****************************************************************************/
395
396/*
397 * Global interrupting type register.
398 */
399#define GITR_RXMASK 0xc0
400#define GITR_RXNONE 0x00
401#define GITR_RXBADDATA 0x80
402#define GITR_RXGOODDATA 0xc0
403#define GITR_TXDATA 0x20
404
405#define GITR_SUBTYPEMASK 0x07
406#define GITR_SUBNONE 0x00
407#define GITR_SUBCOS 0x01
408#define GITR_SUBADDR 0x02
409#define GITR_SUBXONXOFF 0x03
410#define GITR_SUBBREAK 0x05
411
412/*****************************************************************************/
413
414/*
415 * Input port change register.
416 */
417#define IPR_CTS 0x01
418#define IPR_DTR 0x02
419#define IPR_RTS 0x04
420#define IPR_DCD 0x08
421#define IPR_CTSCHANGE 0x10
422#define IPR_DTRCHANGE 0x20
423#define IPR_RTSCHANGE 0x40
424#define IPR_DCDCHANGE 0x80
425
426#define IPR_CHANGEMASK 0xf0
427
428/*****************************************************************************/
429
430/*
431 * IO port interrupt and output register.
432 */
433#define IOPR_CTS 0x01
434#define IOPR_DTR 0x02
435#define IOPR_RTS 0x04
436#define IOPR_DCD 0x08
437#define IOPR_CTSCOS 0x10
438#define IOPR_DTRCOS 0x20
439#define IOPR_RTSCOS 0x40
440#define IOPR_DCDCOS 0x80
441
442/*****************************************************************************/
443
444/*
445 * IO port configuration register.
446 */
447#define IOPCR_SETCTS 0x00
448#define IOPCR_SETDTR 0x04
449#define IOPCR_SETRTS 0x10
450#define IOPCR_SETDCD 0x00
451
452#define IOPCR_SETSIGS (IOPCR_SETRTS | IOPCR_SETRTS | IOPCR_SETDTR | IOPCR_SETDCD)
453
454/*****************************************************************************/
455
456/*
457 * General purpose output select register.
458 */
459#define GPORS_TXC1XA 0x08
460#define GPORS_TXC16XA 0x09
461#define GPORS_RXC16XA 0x0a
462#define GPORS_TXC16XB 0x0b
463#define GPORS_GPOR3 0x0c
464#define GPORS_GPOR2 0x0d
465#define GPORS_GPOR1 0x0e
466#define GPORS_GPOR0 0x0f
467
468/*****************************************************************************/
469
470/*
471 * General purpose output register.
472 */
473#define GPOR_0 0x01
474#define GPOR_1 0x02
475#define GPOR_2 0x04
476#define GPOR_3 0x08
477
478/*****************************************************************************/
479
480/*
481 * General purpose output clock register.
482 */
483#define GPORC_0NONE 0x00
484#define GPORC_0GIN0 0x01
485#define GPORC_0GIN1 0x02
486#define GPORC_0IO3A 0x02
487
488#define GPORC_1NONE 0x00
489#define GPORC_1GIN0 0x04
490#define GPORC_1GIN1 0x08
491#define GPORC_1IO3C 0x0c
492
493#define GPORC_2NONE 0x00
494#define GPORC_2GIN0 0x10
495#define GPORC_2GIN1 0x20
496#define GPORC_2IO3E 0x20
497
498#define GPORC_3NONE 0x00
499#define GPORC_3GIN0 0x40
500#define GPORC_3GIN1 0x80
501#define GPORC_3IO3G 0xc0
502
503/*****************************************************************************/
504
505/*
506 * General purpose output data register.
507 */
508#define GPOD_0MASK 0x03
509#define GPOD_0SET1 0x00
510#define GPOD_0SET0 0x01
511#define GPOD_0SETR0 0x02
512#define GPOD_0SETIO3B 0x03
513
514#define GPOD_1MASK 0x0c
515#define GPOD_1SET1 0x00
516#define GPOD_1SET0 0x04
517#define GPOD_1SETR0 0x08
518#define GPOD_1SETIO3D 0x0c
519
520#define GPOD_2MASK 0x30
521#define GPOD_2SET1 0x00
522#define GPOD_2SET0 0x10
523#define GPOD_2SETR0 0x20
524#define GPOD_2SETIO3F 0x30
525
526#define GPOD_3MASK 0xc0
527#define GPOD_3SET1 0x00
528#define GPOD_3SET0 0x40
529#define GPOD_3SETR0 0x80
530#define GPOD_3SETIO3H 0xc0
531
532/*****************************************************************************/
533#endif
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 90e9f981358a..861e51de476b 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -12,9 +12,12 @@
12 12
13#include <linux/types.h> 13#include <linux/types.h>
14 14
15#include <linux/tty_flags.h>
16
15#ifdef __KERNEL__ 17#ifdef __KERNEL__
16#include <asm/page.h> 18#include <asm/page.h>
17 19
20
18/* 21/*
19 * Counters of the input lines (CTS, DSR, RI, CD) interrupts 22 * Counters of the input lines (CTS, DSR, RI, CD) interrupts
20 */ 23 */
@@ -83,89 +86,11 @@ struct serial_struct {
83#define SERIAL_IO_HUB6 1 86#define SERIAL_IO_HUB6 1
84#define SERIAL_IO_MEM 2 87#define SERIAL_IO_MEM 2
85 88
86struct serial_uart_config {
87 char *name;
88 int dfl_xmit_fifo_size;
89 int flags;
90};
91
92#define UART_CLEAR_FIFO 0x01 89#define UART_CLEAR_FIFO 0x01
93#define UART_USE_FIFO 0x02 90#define UART_USE_FIFO 0x02
94#define UART_STARTECH 0x04 91#define UART_STARTECH 0x04
95#define UART_NATSEMI 0x08 92#define UART_NATSEMI 0x08
96 93
97/*
98 * Definitions for async_struct (and serial_struct) flags field
99 *
100 * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
101 */
102#define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes
103 * on the callout port */
104#define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */
105#define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */
106#define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */
107#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */
108#define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */
109#define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */
110#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during
111 * autoconfiguration */
112#define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */
113#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */
114#define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */
115#define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */
116#define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */
117#define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */
118#define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety
119 * checks. Note: can be dangerous! */
120#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */
121#define ASYNCB_LAST_USER 15
122
123/* Internal flags used only by kernel */
124#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
125#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */
126#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
127#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */
128#define ASYNCB_CLOSING 27 /* Serial port is closing */
129#define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */
130#define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */
131#define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */
132#define ASYNCB_CONS_FLOW 23 /* flow control for console */
133#define ASYNCB_FIRST_KERNEL 22
134
135#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY)
136#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED)
137#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT)
138#define ASYNC_SAK (1U << ASYNCB_SAK)
139#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS)
140#define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI)
141#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI)
142#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST)
143#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ)
144#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT)
145#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT)
146#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP)
147#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD)
148#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI)
149#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY)
150#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART)
151#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE)
152
153#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1)
154#define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
155 ASYNC_LOW_LATENCY)
156#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI)
157#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI)
158#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
159
160#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED)
161#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE)
162#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF)
163#define ASYNC_CLOSING (1U << ASYNCB_CLOSING)
164#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW)
165#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD)
166#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ)
167#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW)
168#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1))
169 94
170/* 95/*
171 * Multiport serial configuration structure --- external structure 96 * Multiport serial configuration structure --- external structure
diff --git a/include/linux/serial167.h b/include/linux/serial167.h
deleted file mode 100644
index 59c81b708562..000000000000
--- a/include/linux/serial167.h
+++ /dev/null
@@ -1,157 +0,0 @@
1/*
2 * serial167.h
3 *
4 * Richard Hirst [richard@sleepie.demon.co.uk]
5 *
6 * Based on cyclades.h
7 */
8
9struct cyclades_monitor {
10 unsigned long int_count;
11 unsigned long char_count;
12 unsigned long char_max;
13 unsigned long char_last;
14};
15
16/*
17 * This is our internal structure for each serial port's state.
18 *
19 * Many fields are paralleled by the structure used by the serial_struct
20 * structure.
21 *
22 * For definitions of the flags field, see tty.h
23 */
24
25struct cyclades_port {
26 int magic;
27 int type;
28 int card;
29 int line;
30 int flags; /* defined in tty.h */
31 struct tty_struct *tty;
32 int read_status_mask;
33 int timeout;
34 int xmit_fifo_size;
35 int cor1,cor2,cor3,cor4,cor5,cor6,cor7;
36 int tbpr,tco,rbpr,rco;
37 int ignore_status_mask;
38 int close_delay;
39 int IER; /* Interrupt Enable Register */
40 unsigned long last_active;
41 int count; /* # of fd on device */
42 int x_char; /* to be pushed out ASAP */
43 int x_break;
44 int blocked_open; /* # of blocked opens */
45 unsigned char *xmit_buf;
46 int xmit_head;
47 int xmit_tail;
48 int xmit_cnt;
49 int default_threshold;
50 int default_timeout;
51 wait_queue_head_t open_wait;
52 wait_queue_head_t close_wait;
53 struct cyclades_monitor mon;
54};
55
56#define CYCLADES_MAGIC 0x4359
57
58#define CYGETMON 0x435901
59#define CYGETTHRESH 0x435902
60#define CYSETTHRESH 0x435903
61#define CYGETDEFTHRESH 0x435904
62#define CYSETDEFTHRESH 0x435905
63#define CYGETTIMEOUT 0x435906
64#define CYSETTIMEOUT 0x435907
65#define CYGETDEFTIMEOUT 0x435908
66#define CYSETDEFTIMEOUT 0x435909
67
68#define CyMaxChipsPerCard 1
69
70/**** cd2401 registers ****/
71
72#define CyGFRCR (0x81)
73#define CyCCR (0x13)
74#define CyCLR_CHAN (0x40)
75#define CyINIT_CHAN (0x20)
76#define CyCHIP_RESET (0x10)
77#define CyENB_XMTR (0x08)
78#define CyDIS_XMTR (0x04)
79#define CyENB_RCVR (0x02)
80#define CyDIS_RCVR (0x01)
81#define CyCAR (0xee)
82#define CyIER (0x11)
83#define CyMdmCh (0x80)
84#define CyRxExc (0x20)
85#define CyRxData (0x08)
86#define CyTxMpty (0x02)
87#define CyTxRdy (0x01)
88#define CyLICR (0x26)
89#define CyRISR (0x89)
90#define CyTIMEOUT (0x80)
91#define CySPECHAR (0x70)
92#define CyOVERRUN (0x08)
93#define CyPARITY (0x04)
94#define CyFRAME (0x02)
95#define CyBREAK (0x01)
96#define CyREOIR (0x84)
97#define CyTEOIR (0x85)
98#define CyMEOIR (0x86)
99#define CyNOTRANS (0x08)
100#define CyRFOC (0x30)
101#define CyRDR (0xf8)
102#define CyTDR (0xf8)
103#define CyMISR (0x8b)
104#define CyRISR (0x89)
105#define CyTISR (0x8a)
106#define CyMSVR1 (0xde)
107#define CyMSVR2 (0xdf)
108#define CyDSR (0x80)
109#define CyDCD (0x40)
110#define CyCTS (0x20)
111#define CyDTR (0x02)
112#define CyRTS (0x01)
113#define CyRTPRL (0x25)
114#define CyRTPRH (0x24)
115#define CyCOR1 (0x10)
116#define CyPARITY_NONE (0x00)
117#define CyPARITY_E (0x40)
118#define CyPARITY_O (0xC0)
119#define Cy_5_BITS (0x04)
120#define Cy_6_BITS (0x05)
121#define Cy_7_BITS (0x06)
122#define Cy_8_BITS (0x07)
123#define CyCOR2 (0x17)
124#define CyETC (0x20)
125#define CyCtsAE (0x02)
126#define CyCOR3 (0x16)
127#define Cy_1_STOP (0x02)
128#define Cy_2_STOP (0x04)
129#define CyCOR4 (0x15)
130#define CyREC_FIFO (0x0F) /* Receive FIFO threshold */
131#define CyCOR5 (0x14)
132#define CyCOR6 (0x18)
133#define CyCOR7 (0x07)
134#define CyRBPR (0xcb)
135#define CyRCOR (0xc8)
136#define CyTBPR (0xc3)
137#define CyTCOR (0xc0)
138#define CySCHR1 (0x1f)
139#define CySCHR2 (0x1e)
140#define CyTPR (0xda)
141#define CyPILR1 (0xe3)
142#define CyPILR2 (0xe0)
143#define CyPILR3 (0xe1)
144#define CyCMR (0x1b)
145#define CyASYNC (0x02)
146#define CyLICR (0x26)
147#define CyLIVR (0x09)
148#define CySCRL (0x23)
149#define CySCRH (0x22)
150#define CyTFTC (0x80)
151
152
153/* max number of chars in the FIFO */
154
155#define CyMAX_CHAR_FIFO 12
156
157/***************************************************************************/
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index a416e92012ef..c174c90fb3fb 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -65,11 +65,38 @@ enum {
65 * platform device. Using these will make your driver 65 * platform device. Using these will make your driver
66 * dependent on the 8250 driver. 66 * dependent on the 8250 driver.
67 */ 67 */
68struct uart_port; 68
69struct uart_8250_port; 69struct uart_8250_port {
70 struct uart_port port;
71 struct timer_list timer; /* "no irq" timer */
72 struct list_head list; /* ports on this IRQ */
73 unsigned short capabilities; /* port capabilities */
74 unsigned short bugs; /* port bugs */
75 unsigned int tx_loadsz; /* transmit fifo load size */
76 unsigned char acr;
77 unsigned char ier;
78 unsigned char lcr;
79 unsigned char mcr;
80 unsigned char mcr_mask; /* mask of user bits */
81 unsigned char mcr_force; /* mask of forced bits */
82 unsigned char cur_iotype; /* Running I/O type */
83
84 /*
85 * Some bits in registers are cleared on a read, so they must
86 * be saved whenever the register is read but the bits will not
87 * be immediately processed.
88 */
89#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
90 unsigned char lsr_saved_flags;
91#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
92 unsigned char msr_saved_flags;
93
94 /* 8250 specific callbacks */
95 int (*dl_read)(struct uart_8250_port *);
96 void (*dl_write)(struct uart_8250_port *, int);
97};
70 98
71int serial8250_register_8250_port(struct uart_8250_port *); 99int serial8250_register_8250_port(struct uart_8250_port *);
72int serial8250_register_port(struct uart_port *);
73void serial8250_unregister_port(int line); 100void serial8250_unregister_port(int line);
74void serial8250_suspend_port(int line); 101void serial8250_suspend_port(int line);
75void serial8250_resume_port(int line); 102void serial8250_resume_port(int line);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 0253c2022e53..7cf0b68bbe9e 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -193,8 +193,8 @@
193/* SH-SCI */ 193/* SH-SCI */
194#define PORT_SCIFB 93 194#define PORT_SCIFB 93
195 195
196/* MAX3107 */ 196/* MAX310X */
197#define PORT_MAX3107 94 197#define PORT_MAX310X 94
198 198
199/* High Speed UART for Medfield */ 199/* High Speed UART for Medfield */
200#define PORT_MFD 95 200#define PORT_MFD 95
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 8ce70d76f836..5ed325e88a81 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -40,6 +40,10 @@
40 40
41#define UART_IIR_BUSY 0x07 /* DesignWare APB Busy Detect */ 41#define UART_IIR_BUSY 0x07 /* DesignWare APB Busy Detect */
42 42
43#define UART_IIR_RX_TIMEOUT 0x0c /* OMAP RX Timeout interrupt */
44#define UART_IIR_XOFF 0x10 /* OMAP XOFF/Special Character */
45#define UART_IIR_CTS_RTS_DSR 0x20 /* OMAP CTS/RTS/DSR Change */
46
43#define UART_FCR 2 /* Out: FIFO Control Register */ 47#define UART_FCR 2 /* Out: FIFO Control Register */
44#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ 48#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
45#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ 49#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
diff --git a/include/linux/stallion.h b/include/linux/stallion.h
deleted file mode 100644
index 336af33c6ea4..000000000000
--- a/include/linux/stallion.h
+++ /dev/null
@@ -1,147 +0,0 @@
1/*****************************************************************************/
2
3/*
4 * stallion.h -- stallion multiport serial driver.
5 *
6 * Copyright (C) 1996-1998 Stallion Technologies
7 * Copyright (C) 1994-1996 Greg Ungerer.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 */
23
24/*****************************************************************************/
25#ifndef _STALLION_H
26#define _STALLION_H
27/*****************************************************************************/
28
29/*
30 * Define important driver constants here.
31 */
32#define STL_MAXBRDS 4
33#define STL_MAXPANELS 4
34#define STL_MAXBANKS 8
35#define STL_PORTSPERPANEL 16
36#define STL_MAXPORTS 64
37#define STL_MAXDEVS (STL_MAXBRDS * STL_MAXPORTS)
38
39
40/*
41 * Define a set of structures to hold all the board/panel/port info
42 * for our ports. These will be dynamically allocated as required.
43 */
44
45/*
46 * Define a ring queue structure for each port. This will hold the
47 * TX data waiting to be output. Characters are fed into this buffer
48 * from the line discipline (or even direct from user space!) and
49 * then fed into the UARTs during interrupts. Will use a classic ring
50 * queue here for this. The good thing about this type of ring queue
51 * is that the head and tail pointers can be updated without interrupt
52 * protection - since "write" code only needs to change the head, and
53 * interrupt code only needs to change the tail.
54 */
55struct stlrq {
56 char *buf;
57 char *head;
58 char *tail;
59};
60
61/*
62 * Port, panel and board structures to hold status info about each.
63 * The board structure contains pointers to structures for each panel
64 * connected to it, and in turn each panel structure contains pointers
65 * for each port structure for each port on that panel. Note that
66 * the port structure also contains the board and panel number that it
67 * is associated with, this makes it (fairly) easy to get back to the
68 * board/panel info for a port.
69 */
70struct stlport {
71 unsigned long magic;
72 struct tty_port port;
73 unsigned int portnr;
74 unsigned int panelnr;
75 unsigned int brdnr;
76 int ioaddr;
77 int uartaddr;
78 unsigned int pagenr;
79 unsigned long istate;
80 int baud_base;
81 int custom_divisor;
82 int close_delay;
83 int closing_wait;
84 int openwaitcnt;
85 int brklen;
86 unsigned int sigs;
87 unsigned int rxignoremsk;
88 unsigned int rxmarkmsk;
89 unsigned int imr;
90 unsigned int crenable;
91 unsigned long clk;
92 unsigned long hwid;
93 void *uartp;
94 comstats_t stats;
95 struct stlrq tx;
96};
97
98struct stlpanel {
99 unsigned long magic;
100 unsigned int panelnr;
101 unsigned int brdnr;
102 unsigned int pagenr;
103 unsigned int nrports;
104 int iobase;
105 void *uartp;
106 void (*isr)(struct stlpanel *panelp, unsigned int iobase);
107 unsigned int hwid;
108 unsigned int ackmask;
109 struct stlport *ports[STL_PORTSPERPANEL];
110};
111
112struct stlbrd {
113 unsigned long magic;
114 unsigned int brdnr;
115 unsigned int brdtype;
116 unsigned int state;
117 unsigned int nrpanels;
118 unsigned int nrports;
119 unsigned int nrbnks;
120 int irq;
121 int irqtype;
122 int (*isr)(struct stlbrd *brdp);
123 unsigned int ioaddr1;
124 unsigned int ioaddr2;
125 unsigned int iosize1;
126 unsigned int iosize2;
127 unsigned int iostatus;
128 unsigned int ioctrl;
129 unsigned int ioctrlval;
130 unsigned int hwid;
131 unsigned long clk;
132 unsigned int bnkpageaddr[STL_MAXBANKS];
133 unsigned int bnkstataddr[STL_MAXBANKS];
134 struct stlpanel *bnk2panel[STL_MAXBANKS];
135 struct stlpanel *panels[STL_MAXPANELS];
136};
137
138
139/*
140 * Define MAGIC numbers used for above structures.
141 */
142#define STL_PORTMAGIC 0x5a7182c9
143#define STL_PANELMAGIC 0x7ef621a1
144#define STL_BOARDMAGIC 0xa2267f52
145
146/*****************************************************************************/
147#endif
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 9f47ab540f65..1509b86825d8 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -43,6 +43,7 @@
43#include <linux/tty_driver.h> 43#include <linux/tty_driver.h>
44#include <linux/tty_ldisc.h> 44#include <linux/tty_ldisc.h>
45#include <linux/mutex.h> 45#include <linux/mutex.h>
46#include <linux/tty_flags.h>
46 47
47 48
48 49
@@ -103,28 +104,28 @@ struct tty_bufhead {
103#define TTY_PARITY 3 104#define TTY_PARITY 3
104#define TTY_OVERRUN 4 105#define TTY_OVERRUN 4
105 106
106#define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR]) 107#define INTR_CHAR(tty) ((tty)->termios.c_cc[VINTR])
107#define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT]) 108#define QUIT_CHAR(tty) ((tty)->termios.c_cc[VQUIT])
108#define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE]) 109#define ERASE_CHAR(tty) ((tty)->termios.c_cc[VERASE])
109#define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL]) 110#define KILL_CHAR(tty) ((tty)->termios.c_cc[VKILL])
110#define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF]) 111#define EOF_CHAR(tty) ((tty)->termios.c_cc[VEOF])
111#define TIME_CHAR(tty) ((tty)->termios->c_cc[VTIME]) 112#define TIME_CHAR(tty) ((tty)->termios.c_cc[VTIME])
112#define MIN_CHAR(tty) ((tty)->termios->c_cc[VMIN]) 113#define MIN_CHAR(tty) ((tty)->termios.c_cc[VMIN])
113#define SWTC_CHAR(tty) ((tty)->termios->c_cc[VSWTC]) 114#define SWTC_CHAR(tty) ((tty)->termios.c_cc[VSWTC])
114#define START_CHAR(tty) ((tty)->termios->c_cc[VSTART]) 115#define START_CHAR(tty) ((tty)->termios.c_cc[VSTART])
115#define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP]) 116#define STOP_CHAR(tty) ((tty)->termios.c_cc[VSTOP])
116#define SUSP_CHAR(tty) ((tty)->termios->c_cc[VSUSP]) 117#define SUSP_CHAR(tty) ((tty)->termios.c_cc[VSUSP])
117#define EOL_CHAR(tty) ((tty)->termios->c_cc[VEOL]) 118#define EOL_CHAR(tty) ((tty)->termios.c_cc[VEOL])
118#define REPRINT_CHAR(tty) ((tty)->termios->c_cc[VREPRINT]) 119#define REPRINT_CHAR(tty) ((tty)->termios.c_cc[VREPRINT])
119#define DISCARD_CHAR(tty) ((tty)->termios->c_cc[VDISCARD]) 120#define DISCARD_CHAR(tty) ((tty)->termios.c_cc[VDISCARD])
120#define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE]) 121#define WERASE_CHAR(tty) ((tty)->termios.c_cc[VWERASE])
121#define LNEXT_CHAR(tty) ((tty)->termios->c_cc[VLNEXT]) 122#define LNEXT_CHAR(tty) ((tty)->termios.c_cc[VLNEXT])
122#define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2]) 123#define EOL2_CHAR(tty) ((tty)->termios.c_cc[VEOL2])
123 124
124#define _I_FLAG(tty, f) ((tty)->termios->c_iflag & (f)) 125#define _I_FLAG(tty, f) ((tty)->termios.c_iflag & (f))
125#define _O_FLAG(tty, f) ((tty)->termios->c_oflag & (f)) 126#define _O_FLAG(tty, f) ((tty)->termios.c_oflag & (f))
126#define _C_FLAG(tty, f) ((tty)->termios->c_cflag & (f)) 127#define _C_FLAG(tty, f) ((tty)->termios.c_cflag & (f))
127#define _L_FLAG(tty, f) ((tty)->termios->c_lflag & (f)) 128#define _L_FLAG(tty, f) ((tty)->termios.c_lflag & (f))
128 129
129#define I_IGNBRK(tty) _I_FLAG((tty), IGNBRK) 130#define I_IGNBRK(tty) _I_FLAG((tty), IGNBRK)
130#define I_BRKINT(tty) _I_FLAG((tty), BRKINT) 131#define I_BRKINT(tty) _I_FLAG((tty), BRKINT)
@@ -268,10 +269,11 @@ struct tty_struct {
268 struct mutex ldisc_mutex; 269 struct mutex ldisc_mutex;
269 struct tty_ldisc *ldisc; 270 struct tty_ldisc *ldisc;
270 271
272 struct mutex legacy_mutex;
271 struct mutex termios_mutex; 273 struct mutex termios_mutex;
272 spinlock_t ctrl_lock; 274 spinlock_t ctrl_lock;
273 /* Termios values are protected by the termios mutex */ 275 /* Termios values are protected by the termios mutex */
274 struct ktermios *termios, *termios_locked; 276 struct ktermios termios, termios_locked;
275 struct termiox *termiox; /* May be NULL for unsupported */ 277 struct termiox *termiox; /* May be NULL for unsupported */
276 char name[64]; 278 char name[64];
277 struct pid *pgrp; /* Protected by ctrl lock */ 279 struct pid *pgrp; /* Protected by ctrl lock */
@@ -410,6 +412,10 @@ extern int tty_register_driver(struct tty_driver *driver);
410extern int tty_unregister_driver(struct tty_driver *driver); 412extern int tty_unregister_driver(struct tty_driver *driver);
411extern struct device *tty_register_device(struct tty_driver *driver, 413extern struct device *tty_register_device(struct tty_driver *driver,
412 unsigned index, struct device *dev); 414 unsigned index, struct device *dev);
415extern struct device *tty_register_device_attr(struct tty_driver *driver,
416 unsigned index, struct device *device,
417 void *drvdata,
418 const struct attribute_group **attr_grp);
413extern void tty_unregister_device(struct tty_driver *driver, unsigned index); 419extern void tty_unregister_device(struct tty_driver *driver, unsigned index);
414extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp, 420extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
415 int buflen); 421 int buflen);
@@ -423,7 +429,6 @@ extern void tty_unthrottle(struct tty_struct *tty);
423extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws); 429extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
424extern void tty_driver_remove_tty(struct tty_driver *driver, 430extern void tty_driver_remove_tty(struct tty_driver *driver,
425 struct tty_struct *tty); 431 struct tty_struct *tty);
426extern void tty_shutdown(struct tty_struct *tty);
427extern void tty_free_termios(struct tty_struct *tty); 432extern void tty_free_termios(struct tty_struct *tty);
428extern int is_current_pgrp_orphaned(void); 433extern int is_current_pgrp_orphaned(void);
429extern struct pid *tty_get_pgrp(struct tty_struct *tty); 434extern struct pid *tty_get_pgrp(struct tty_struct *tty);
@@ -497,6 +502,15 @@ extern int tty_write_lock(struct tty_struct *tty, int ndelay);
497#define tty_is_writelocked(tty) (mutex_is_locked(&tty->atomic_write_lock)) 502#define tty_is_writelocked(tty) (mutex_is_locked(&tty->atomic_write_lock))
498 503
499extern void tty_port_init(struct tty_port *port); 504extern void tty_port_init(struct tty_port *port);
505extern void tty_port_link_device(struct tty_port *port,
506 struct tty_driver *driver, unsigned index);
507extern struct device *tty_port_register_device(struct tty_port *port,
508 struct tty_driver *driver, unsigned index,
509 struct device *device);
510extern struct device *tty_port_register_device_attr(struct tty_port *port,
511 struct tty_driver *driver, unsigned index,
512 struct device *device, void *drvdata,
513 const struct attribute_group **attr_grp);
500extern int tty_port_alloc_xmit_buf(struct tty_port *port); 514extern int tty_port_alloc_xmit_buf(struct tty_port *port);
501extern void tty_port_free_xmit_buf(struct tty_port *port); 515extern void tty_port_free_xmit_buf(struct tty_port *port);
502extern void tty_port_put(struct tty_port *port); 516extern void tty_port_put(struct tty_port *port);
@@ -508,6 +522,12 @@ static inline struct tty_port *tty_port_get(struct tty_port *port)
508 return port; 522 return port;
509} 523}
510 524
525/* If the cts flow control is enabled, return true. */
526static inline bool tty_port_cts_enabled(struct tty_port *port)
527{
528 return port->flags & ASYNC_CTS_FLOW;
529}
530
511extern struct tty_struct *tty_port_tty_get(struct tty_port *port); 531extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
512extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty); 532extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
513extern int tty_port_carrier_raised(struct tty_port *port); 533extern int tty_port_carrier_raised(struct tty_port *port);
@@ -521,6 +541,8 @@ extern int tty_port_close_start(struct tty_port *port,
521extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty); 541extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
522extern void tty_port_close(struct tty_port *port, 542extern void tty_port_close(struct tty_port *port,
523 struct tty_struct *tty, struct file *filp); 543 struct tty_struct *tty, struct file *filp);
544extern int tty_port_install(struct tty_port *port, struct tty_driver *driver,
545 struct tty_struct *tty);
524extern int tty_port_open(struct tty_port *port, 546extern int tty_port_open(struct tty_port *port,
525 struct tty_struct *tty, struct file *filp); 547 struct tty_struct *tty, struct file *filp);
526static inline int tty_port_users(struct tty_port *port) 548static inline int tty_port_users(struct tty_port *port)
@@ -605,8 +627,12 @@ extern long vt_compat_ioctl(struct tty_struct *tty,
605 627
606/* tty_mutex.c */ 628/* tty_mutex.c */
607/* functions for preparation of BKL removal */ 629/* functions for preparation of BKL removal */
608extern void __lockfunc tty_lock(void) __acquires(tty_lock); 630extern void __lockfunc tty_lock(struct tty_struct *tty);
609extern void __lockfunc tty_unlock(void) __releases(tty_lock); 631extern void __lockfunc tty_unlock(struct tty_struct *tty);
632extern void __lockfunc tty_lock_pair(struct tty_struct *tty,
633 struct tty_struct *tty2);
634extern void __lockfunc tty_unlock_pair(struct tty_struct *tty,
635 struct tty_struct *tty2);
610 636
611/* 637/*
612 * this shall be called only from where BTM is held (like close) 638 * this shall be called only from where BTM is held (like close)
@@ -621,9 +647,9 @@ extern void __lockfunc tty_unlock(void) __releases(tty_lock);
621static inline void tty_wait_until_sent_from_close(struct tty_struct *tty, 647static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
622 long timeout) 648 long timeout)
623{ 649{
624 tty_unlock(); /* tty->ops->close holds the BTM, drop it while waiting */ 650 tty_unlock(tty); /* tty->ops->close holds the BTM, drop it while waiting */
625 tty_wait_until_sent(tty, timeout); 651 tty_wait_until_sent(tty, timeout);
626 tty_lock(); 652 tty_lock(tty);
627} 653}
628 654
629/* 655/*
@@ -638,16 +664,16 @@ static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
638 * 664 *
639 * Do not use in new code. 665 * Do not use in new code.
640 */ 666 */
641#define wait_event_interruptible_tty(wq, condition) \ 667#define wait_event_interruptible_tty(tty, wq, condition) \
642({ \ 668({ \
643 int __ret = 0; \ 669 int __ret = 0; \
644 if (!(condition)) { \ 670 if (!(condition)) { \
645 __wait_event_interruptible_tty(wq, condition, __ret); \ 671 __wait_event_interruptible_tty(tty, wq, condition, __ret); \
646 } \ 672 } \
647 __ret; \ 673 __ret; \
648}) 674})
649 675
650#define __wait_event_interruptible_tty(wq, condition, ret) \ 676#define __wait_event_interruptible_tty(tty, wq, condition, ret) \
651do { \ 677do { \
652 DEFINE_WAIT(__wait); \ 678 DEFINE_WAIT(__wait); \
653 \ 679 \
@@ -656,9 +682,9 @@ do { \
656 if (condition) \ 682 if (condition) \
657 break; \ 683 break; \
658 if (!signal_pending(current)) { \ 684 if (!signal_pending(current)) { \
659 tty_unlock(); \ 685 tty_unlock(tty); \
660 schedule(); \ 686 schedule(); \
661 tty_lock(); \ 687 tty_lock(tty); \
662 continue; \ 688 continue; \
663 } \ 689 } \
664 ret = -ERESTARTSYS; \ 690 ret = -ERESTARTSYS; \
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 6e6dbb7447b6..dd976cfb6131 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -45,14 +45,9 @@
45 * 45 *
46 * void (*shutdown)(struct tty_struct * tty); 46 * void (*shutdown)(struct tty_struct * tty);
47 * 47 *
48 * This routine is called synchronously when a particular tty device 48 * This routine is called under the tty lock when a particular tty device
49 * is closed for the last time freeing up the resources. 49 * is closed for the last time. It executes before the tty resources
50 * Note that tty_shutdown() is not called if ops->shutdown is defined. 50 * are freed so may execute while another function holds a tty kref.
51 * This means one is responsible to take care of calling ops->remove (e.g.
52 * via tty_driver_remove_tty) and releasing tty->termios.
53 * Note that this hook may be called from *all* the contexts where one
54 * uses tty refcounting (e.g. tty_port_tty_get).
55 *
56 * 51 *
57 * void (*cleanup)(struct tty_struct * tty); 52 * void (*cleanup)(struct tty_struct * tty);
58 * 53 *
@@ -294,18 +289,18 @@ struct tty_operations {
294struct tty_driver { 289struct tty_driver {
295 int magic; /* magic number for this structure */ 290 int magic; /* magic number for this structure */
296 struct kref kref; /* Reference management */ 291 struct kref kref; /* Reference management */
297 struct cdev cdev; 292 struct cdev *cdevs;
298 struct module *owner; 293 struct module *owner;
299 const char *driver_name; 294 const char *driver_name;
300 const char *name; 295 const char *name;
301 int name_base; /* offset of printed name */ 296 int name_base; /* offset of printed name */
302 int major; /* major device number */ 297 int major; /* major device number */
303 int minor_start; /* start of minor device number */ 298 int minor_start; /* start of minor device number */
304 int num; /* number of devices allocated */ 299 unsigned int num; /* number of devices allocated */
305 short type; /* type of tty driver */ 300 short type; /* type of tty driver */
306 short subtype; /* subtype of tty driver */ 301 short subtype; /* subtype of tty driver */
307 struct ktermios init_termios; /* Initial termios */ 302 struct ktermios init_termios; /* Initial termios */
308 int flags; /* tty driver flags */ 303 unsigned long flags; /* tty driver flags */
309 struct proc_dir_entry *proc_entry; /* /proc fs entry */ 304 struct proc_dir_entry *proc_entry; /* /proc fs entry */
310 struct tty_driver *other; /* only used for the PTY driver */ 305 struct tty_driver *other; /* only used for the PTY driver */
311 306
@@ -313,6 +308,7 @@ struct tty_driver {
313 * Pointer to the tty data structures 308 * Pointer to the tty data structures
314 */ 309 */
315 struct tty_struct **ttys; 310 struct tty_struct **ttys;
311 struct tty_port **ports;
316 struct ktermios **termios; 312 struct ktermios **termios;
317 void *driver_state; 313 void *driver_state;
318 314
@@ -326,7 +322,8 @@ struct tty_driver {
326 322
327extern struct list_head tty_drivers; 323extern struct list_head tty_drivers;
328 324
329extern struct tty_driver *__alloc_tty_driver(int lines, struct module *owner); 325extern struct tty_driver *__tty_alloc_driver(unsigned int lines,
326 struct module *owner, unsigned long flags);
330extern void put_tty_driver(struct tty_driver *driver); 327extern void put_tty_driver(struct tty_driver *driver);
331extern void tty_set_operations(struct tty_driver *driver, 328extern void tty_set_operations(struct tty_driver *driver,
332 const struct tty_operations *op); 329 const struct tty_operations *op);
@@ -334,7 +331,21 @@ extern struct tty_driver *tty_find_polling_driver(char *name, int *line);
334 331
335extern void tty_driver_kref_put(struct tty_driver *driver); 332extern void tty_driver_kref_put(struct tty_driver *driver);
336 333
337#define alloc_tty_driver(lines) __alloc_tty_driver(lines, THIS_MODULE) 334/* Use TTY_DRIVER_* flags below */
335#define tty_alloc_driver(lines, flags) \
336 __tty_alloc_driver(lines, THIS_MODULE, flags)
337
338/*
339 * DEPRECATED Do not use this in new code, use tty_alloc_driver instead.
340 * (And change the return value checks.)
341 */
342static inline struct tty_driver *alloc_tty_driver(unsigned int lines)
343{
344 struct tty_driver *ret = tty_alloc_driver(lines, 0);
345 if (IS_ERR(ret))
346 return NULL;
347 return ret;
348}
338 349
339static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d) 350static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
340{ 351{
@@ -380,6 +391,14 @@ static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
380 * the requested timeout to the caller instead of using a simple 391 * the requested timeout to the caller instead of using a simple
381 * on/off interface. 392 * on/off interface.
382 * 393 *
394 * TTY_DRIVER_DYNAMIC_ALLOC -- do not allocate structures which are
395 * needed per line for this driver as it would waste memory.
396 * The driver will take care.
397 *
398 * TTY_DRIVER_UNNUMBERED_NODE -- do not create numbered /dev nodes. In
399 * other words create /dev/ttyprintk and not /dev/ttyprintk0.
400 * Applicable only when a driver for a single tty device is
401 * being allocated.
383 */ 402 */
384#define TTY_DRIVER_INSTALLED 0x0001 403#define TTY_DRIVER_INSTALLED 0x0001
385#define TTY_DRIVER_RESET_TERMIOS 0x0002 404#define TTY_DRIVER_RESET_TERMIOS 0x0002
@@ -387,6 +406,8 @@ static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
387#define TTY_DRIVER_DYNAMIC_DEV 0x0008 406#define TTY_DRIVER_DYNAMIC_DEV 0x0008
388#define TTY_DRIVER_DEVPTS_MEM 0x0010 407#define TTY_DRIVER_DEVPTS_MEM 0x0010
389#define TTY_DRIVER_HARDWARE_BREAK 0x0020 408#define TTY_DRIVER_HARDWARE_BREAK 0x0020
409#define TTY_DRIVER_DYNAMIC_ALLOC 0x0040
410#define TTY_DRIVER_UNNUMBERED_NODE 0x0080
390 411
391/* tty driver types */ 412/* tty driver types */
392#define TTY_DRIVER_TYPE_SYSTEM 0x0001 413#define TTY_DRIVER_TYPE_SYSTEM 0x0001
diff --git a/include/linux/tty_flags.h b/include/linux/tty_flags.h
new file mode 100644
index 000000000000..eefcb483a2c0
--- /dev/null
+++ b/include/linux/tty_flags.h
@@ -0,0 +1,78 @@
1#ifndef _LINUX_TTY_FLAGS_H
2#define _LINUX_TTY_FLAGS_H
3
4/*
5 * Definitions for async_struct (and serial_struct) flags field also
6 * shared by the tty_port flags structures.
7 *
8 * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
9 */
10#define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes
11 * on the callout port */
12#define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */
13#define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */
14#define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */
15#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */
16#define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */
17#define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */
18#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during
19 * autoconfiguration */
20#define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */
21#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */
22#define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */
23#define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */
24#define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */
25#define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */
26#define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety
27 * checks. Note: can be dangerous! */
28#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */
29#define ASYNCB_LAST_USER 15
30
31/* Internal flags used only by kernel */
32#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
33#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */
34#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
35#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */
36#define ASYNCB_CLOSING 27 /* Serial port is closing */
37#define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */
38#define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */
39#define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */
40#define ASYNCB_CONS_FLOW 23 /* flow control for console */
41#define ASYNCB_FIRST_KERNEL 22
42
43#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY)
44#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED)
45#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT)
46#define ASYNC_SAK (1U << ASYNCB_SAK)
47#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS)
48#define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI)
49#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI)
50#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST)
51#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ)
52#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT)
53#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT)
54#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP)
55#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD)
56#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI)
57#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY)
58#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART)
59#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE)
60
61#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1)
62#define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
63 ASYNC_LOW_LATENCY)
64#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI)
65#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI)
66#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
67
68#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED)
69#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE)
70#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF)
71#define ASYNC_CLOSING (1U << ASYNCB_CLOSING)
72#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW)
73#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD)
74#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ)
75#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW)
76#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1))
77
78#endif
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-15 07:56:04 -0400