Merge commit '371a00448f95adaa612cf1a0b31a11e7093bc706' of 'git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git'

We need the following 2 patches from the 'net-next' tree for the BCMA flash
driver:

371a004 bcma: detect and register NAND flash device
d57ef3a bcma: detect and register serial flash device

and this is why we are merging the net-next tree (presumably persistent)
up to commit '371a004'.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

4 files changed, 144 insertions, 5 deletions

diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index d323a4b4143c..6ba45d2b99db 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -100,6 +100,7 @@
 #define  BCMA_CC_CHIPST_4706_SFLASH_TYPE        BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */
 #define  BCMA_CC_CHIPST_4706_MIPS_BENDIAN       BIT(3) /* 0: little, 1: big endian */
 #define  BCMA_CC_CHIPST_4706_PCIE1_DISABLE      BIT(5) /* PCIE1 enable strap pin */
+#define  BCMA_CC_CHIPST_5357_NAND_BOOT          BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
 #define BCMA_CC_JCMD                    0x0030          /* Rev >= 10 only */
 #define  BCMA_CC_JCMD_START             0x80000000
 #define  BCMA_CC_JCMD_BUSY              0x80000000
@@ -266,6 +267,29 @@
 #define  BCMA_CC_SROM_CONTROL_SIZE_16K  0x00000004
 #define  BCMA_CC_SROM_CONTROL_SIZE_SHIFT        1
 #define  BCMA_CC_SROM_CONTROL_PRESENT   0x00000001
+/* Block 0x140 - 0x190 registers are chipset specific */
+#define BCMA_CC_4706_FLASHSCFG          0x18C           /* Flash struct configuration */
+#define  BCMA_CC_4706_FLASHSCFG_MASK    0x000000ff
+#define  BCMA_CC_4706_FLASHSCFG_SF1     0x00000001      /* 2nd serial flash present */
+#define  BCMA_CC_4706_FLASHSCFG_PF1     0x00000002      /* 2nd parallel flash present */
+#define  BCMA_CC_4706_FLASHSCFG_SF1_TYPE        0x00000004      /* 2nd serial flash type : 0 : ST, 1 : Atmel */
+#define  BCMA_CC_4706_FLASHSCFG_NF1     0x00000008      /* 2nd NAND flash present */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_MASK      0x000000f0
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_4MB       0x00000010      /* 4MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_8MB       0x00000020      /* 8MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_16MB      0x00000030      /* 16MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_32MB      0x00000040      /* 32MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_64MB      0x00000050      /* 64MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_128MB     0x00000060      /* 128MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_256MB     0x00000070      /* 256MB */
+/* NAND flash registers for BCM4706 (corerev = 31) */
+#define BCMA_CC_NFLASH_CTL              0x01A0
+#define  BCMA_CC_NFLASH_CTL_ERR         0x08000000
+#define BCMA_CC_NFLASH_CONF             0x01A4
+#define BCMA_CC_NFLASH_COL_ADDR         0x01A8
+#define BCMA_CC_NFLASH_ROW_ADDR         0x01AC
+#define BCMA_CC_NFLASH_DATA             0x01B0
+#define BCMA_CC_NFLASH_WAITCNT0         0x01B4
 /* 0x1E0 is defined as shared BCMA_CLKCTLST */
 #define BCMA_CC_HW_WORKAROUND           0x01E4 /* Hardware workaround (rev >= 20) */
 #define BCMA_CC_UART0_DATA              0x0300
@@ -325,6 +349,60 @@
 #define BCMA_CC_PLLCTL_ADDR             0x0660
 #define BCMA_CC_PLLCTL_DATA             0x0664
 #define BCMA_CC_SPROM                   0x0800 /* SPROM beginning */
+/* NAND flash MLC controller registers (corerev >= 38) */
+#define BCMA_CC_NAND_REVISION           0x0C00
+#define BCMA_CC_NAND_CMD_START          0x0C04
+#define BCMA_CC_NAND_CMD_ADDR_X         0x0C08
+#define BCMA_CC_NAND_CMD_ADDR           0x0C0C
+#define BCMA_CC_NAND_CMD_END_ADDR       0x0C10
+#define BCMA_CC_NAND_CS_NAND_SELECT     0x0C14
+#define BCMA_CC_NAND_CS_NAND_XOR        0x0C18
+#define BCMA_CC_NAND_SPARE_RD0          0x0C20
+#define BCMA_CC_NAND_SPARE_RD4          0x0C24
+#define BCMA_CC_NAND_SPARE_RD8          0x0C28
+#define BCMA_CC_NAND_SPARE_RD12         0x0C2C
+#define BCMA_CC_NAND_SPARE_WR0          0x0C30
+#define BCMA_CC_NAND_SPARE_WR4          0x0C34
+#define BCMA_CC_NAND_SPARE_WR8          0x0C38
+#define BCMA_CC_NAND_SPARE_WR12         0x0C3C
+#define BCMA_CC_NAND_ACC_CONTROL        0x0C40
+#define BCMA_CC_NAND_CONFIG             0x0C48
+#define BCMA_CC_NAND_TIMING_1           0x0C50
+#define BCMA_CC_NAND_TIMING_2           0x0C54
+#define BCMA_CC_NAND_SEMAPHORE          0x0C58
+#define BCMA_CC_NAND_DEVID              0x0C60
+#define BCMA_CC_NAND_DEVID_X            0x0C64
+#define BCMA_CC_NAND_BLOCK_LOCK_STATUS  0x0C68
+#define BCMA_CC_NAND_INTFC_STATUS       0x0C6C
+#define BCMA_CC_NAND_ECC_CORR_ADDR_X    0x0C70
+#define BCMA_CC_NAND_ECC_CORR_ADDR      0x0C74
+#define BCMA_CC_NAND_ECC_UNC_ADDR_X     0x0C78
+#define BCMA_CC_NAND_ECC_UNC_ADDR       0x0C7C
+#define BCMA_CC_NAND_READ_ERROR_COUNT   0x0C80
+#define BCMA_CC_NAND_CORR_STAT_THRESHOLD        0x0C84
+#define BCMA_CC_NAND_READ_ADDR_X        0x0C90
+#define BCMA_CC_NAND_READ_ADDR          0x0C94
+#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR_X        0x0C98
+#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR  0x0C9C
+#define BCMA_CC_NAND_COPY_BACK_ADDR_X   0x0CA0
+#define BCMA_CC_NAND_COPY_BACK_ADDR     0x0CA4
+#define BCMA_CC_NAND_BLOCK_ERASE_ADDR_X 0x0CA8
+#define BCMA_CC_NAND_BLOCK_ERASE_ADDR   0x0CAC
+#define BCMA_CC_NAND_INV_READ_ADDR_X    0x0CB0
+#define BCMA_CC_NAND_INV_READ_ADDR      0x0CB4
+#define BCMA_CC_NAND_BLK_WR_PROTECT     0x0CC0
+#define BCMA_CC_NAND_ACC_CONTROL_CS1    0x0CD0
+#define BCMA_CC_NAND_CONFIG_CS1         0x0CD4
+#define BCMA_CC_NAND_TIMING_1_CS1       0x0CD8
+#define BCMA_CC_NAND_TIMING_2_CS1       0x0CDC
+#define BCMA_CC_NAND_SPARE_RD16         0x0D30
+#define BCMA_CC_NAND_SPARE_RD20         0x0D34
+#define BCMA_CC_NAND_SPARE_RD24         0x0D38
+#define BCMA_CC_NAND_SPARE_RD28         0x0D3C
+#define BCMA_CC_NAND_CACHE_ADDR         0x0D40
+#define BCMA_CC_NAND_CACHE_DATA         0x0D44
+#define BCMA_CC_NAND_CTRL_CONFIG        0x0D48
+#define BCMA_CC_NAND_CTRL_STATUS        0x0D4C
 
 /* Divider allocation in 4716/47162/5356 */
 #define BCMA_CC_PMU5_MAINPLL_CPU        1
@@ -415,6 +493,13 @@
 /* 4313 Chip specific ChipControl register bits */
 #define BCMA_CCTRL_4313_12MA_LED_DRIVE          0x00000007      /* 12 mA drive strengh for later 4313 */
 
+/* BCM5357 ChipControl register bits */
+#define BCMA_CHIPCTL_5357_EXTPA                 BIT(14)
+#define BCMA_CHIPCTL_5357_ANT_MUX_2O3           BIT(15)
+#define BCMA_CHIPCTL_5357_NFLASH                BIT(16)
+#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE       BIT(18)
+#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE    BIT(19)
+
 /* Data for the PMU, if available.
  * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
  */
@@ -430,6 +515,26 @@ struct bcma_pflash {
         u32 window_size;
 };
 
+#ifdef CONFIG_BCMA_SFLASH
+struct bcma_sflash {
+        bool present;
+        u32 window;
+        u32 blocksize;
+        u16 numblocks;
+        u32 size;
+};
+#endif
+
+#ifdef CONFIG_BCMA_NFLASH
+struct mtd_info;
+
+struct bcma_nflash {
+        bool present;
+
+        struct mtd_info *mtd;
+};
+#endif
+
 struct bcma_serial_port {
         void *regs;
         unsigned long clockspeed;
@@ -450,6 +555,12 @@ struct bcma_drv_cc {
         struct bcma_chipcommon_pmu pmu;
 #ifdef CONFIG_BCMA_DRIVER_MIPS
         struct bcma_pflash pflash;
+#ifdef CONFIG_BCMA_SFLASH
+        struct bcma_sflash sflash;
+#endif
+#ifdef CONFIG_BCMA_NFLASH
+        struct bcma_nflash nflash;
+#endif
 
         int nr_serial_ports;
         struct bcma_serial_port serial_ports[4];
diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h
index 5a71d5719640..6c9cb93ae3de 100644
--- a/include/linux/bcma/bcma_regs.h
+++ b/include/linux/bcma/bcma_regs.h
@@ -11,11 +11,13 @@
 #define  BCMA_CLKCTLST_HAVEHTREQ        0x00000010 /* HT available request */
 #define  BCMA_CLKCTLST_HWCROFF          0x00000020 /* Force HW clock request off */
 #define  BCMA_CLKCTLST_EXTRESREQ        0x00000700 /* Mask of external resource requests */
+#define  BCMA_CLKCTLST_EXTRESREQ_SHIFT  8
 #define  BCMA_CLKCTLST_HAVEALP          0x00010000 /* ALP available */
 #define  BCMA_CLKCTLST_HAVEHT           0x00020000 /* HT available */
 #define  BCMA_CLKCTLST_BP_ON_ALP        0x00040000 /* RO: running on ALP clock */
 #define  BCMA_CLKCTLST_BP_ON_HT         0x00080000 /* RO: running on HT clock */
 #define  BCMA_CLKCTLST_EXTRESST         0x07000000 /* Mask of external resource status */
+#define  BCMA_CLKCTLST_EXTRESST_SHIFT   24
 /* Is there any BCM4328 on BCMA bus? */
 #define  BCMA_CLKCTLST_4328A0_HAVEHT    0x00010000 /* 4328a0 has reversed bits */
 #define  BCMA_CLKCTLST_4328A0_HAVEALP   0x00020000 /* 4328a0 has reversed bits */
@@ -83,4 +85,6 @@
                                                          * (2 ZettaBytes), high 32 bits
                                                          */
 
+#define BCMA_SFLASH                     0x1c000000
+
 #endif /* LINUX_BCMA_REGS_H_ */
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 2f3878806403..458416279347 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -565,6 +565,14 @@
  *      %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
  *      %NL80211_ATTR_WIPHY_CHANNEL_TYPE.
  *
+ * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
+ *      its %NL80211_ATTR_WDEV identifier. It must have been created with
+ *      %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
+ *      P2P Device can be used for P2P operations, e.g. remain-on-channel and
+ *      public action frame TX.
+ * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
+ *      its %NL80211_ATTR_WDEV identifier.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -708,6 +716,9 @@ enum nl80211_commands {
 
         NL80211_CMD_CH_SWITCH_NOTIFY,
 
+        NL80211_CMD_START_P2P_DEVICE,
+        NL80211_CMD_STOP_P2P_DEVICE,
+
         /* add new commands above here */
 
         /* used to define NL80211_CMD_MAX below */
@@ -1575,6 +1586,10 @@ enum nl80211_attrs {
  * @NL80211_IFTYPE_MESH_POINT: mesh point
  * @NL80211_IFTYPE_P2P_CLIENT: P2P client
  * @NL80211_IFTYPE_P2P_GO: P2P group owner
+ * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
+ *      and therefore can't be created in the normal ways, use the
+ *      %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
+ *      commands to create and destroy one
  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
  * @NUM_NL80211_IFTYPES: number of defined interface types
  *
@@ -1593,6 +1608,7 @@ enum nl80211_iftype {
         NL80211_IFTYPE_MESH_POINT,
         NL80211_IFTYPE_P2P_CLIENT,
         NL80211_IFTYPE_P2P_GO,
+        NL80211_IFTYPE_P2P_DEVICE,
 
         /* keep last */
         NUM_NL80211_IFTYPES,
@@ -2994,12 +3010,18 @@ enum nl80211_ap_sme_features {
  * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
  *      to work properly to suppport receiving regulatory hints from
  *      cellular base stations.
+ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
+ *      P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
+ *      in the interface combinations, even when it's only used for scan
+ *      and remain-on-channel. This could be due to, for example, the
+ *      remain-on-channel implementation requiring a channel context.
  */
 enum nl80211_feature_flags {
-        NL80211_FEATURE_SK_TX_STATUS    = 1 << 0,
-        NL80211_FEATURE_HT_IBSS         = 1 << 1,
-        NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
-        NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
+        NL80211_FEATURE_SK_TX_STATUS                    = 1 << 0,
+        NL80211_FEATURE_HT_IBSS                         = 1 << 1,
+        NL80211_FEATURE_INACTIVITY_TIMER                = 1 << 2,
+        NL80211_FEATURE_CELL_BASE_REG_HINTS             = 1 << 3,
+        NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL        = 1 << 4,
 };
 
 /**
diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h
index 1a6b0045b06b..c2b02a5c86ae 100644
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -504,7 +504,9 @@
 #define SSB_CHIPCO_FLASHCTL_ST_SE       0x02D8          /* Sector Erase */
 #define SSB_CHIPCO_FLASHCTL_ST_BE       0x00C7          /* Bulk Erase */
 #define SSB_CHIPCO_FLASHCTL_ST_DP       0x00B9          /* Deep Power-down */
-#define SSB_CHIPCO_FLASHCTL_ST_RSIG     0x03AB          /* Read Electronic Signature */
+#define SSB_CHIPCO_FLASHCTL_ST_RES      0x03AB          /* Read Electronic Signature */
+#define SSB_CHIPCO_FLASHCTL_ST_CSA      0x1000          /* Keep chip select asserted */
+#define SSB_CHIPCO_FLASHCTL_ST_SSE      0x0220          /* Sub-sector Erase */
 
 /* Status register bits for ST flashes */
 #define SSB_CHIPCO_FLASHSTA_ST_WIP      0x01            /* Write In Progress */