Merge tag 'for-usb-next-2012-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next

xhci: Link PM and bug fixes for 3.5.

Hi Greg,

Here's the final Link Power Management patches, along with a couple of bug
fixes that have been sitting in my queue.  I've fixed all the comments that
Alan and Andiry had on the Link PM patches, so I think they're ready to go.

Sarah Sharp

3 files changed, 67 insertions, 0 deletions

diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
index f1d26b6067f1..b6c2863b2c94 100644
--- a/include/linux/usb/ch11.h
+++ b/include/linux/usb/ch11.h
@@ -76,6 +76,8 @@
 #define USB_PORT_FEAT_C_BH_PORT_RESET           29
 #define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT       30
 
+#define USB_PORT_LPM_TIMEOUT(p)                 (((p) & 0xff) << 8)
+
 /* USB 3.0 hub remote wake mask bits, see table 10-14 */
 #define USB_PORT_FEAT_REMOTE_WAKE_CONNECT       (1 << 8)
 #define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT    (1 << 9)
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index e785d85b617f..d1d732c2838d 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -392,6 +392,11 @@ struct usb_endpoint_descriptor {
 #define USB_ENDPOINT_XFER_INT           3
 #define USB_ENDPOINT_MAX_ADJUSTABLE     0x80
 
+/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
+#define USB_ENDPOINT_INTRTYPE           0x30
+#define USB_ENDPOINT_INTR_PERIODIC      (0 << 4)
+#define USB_ENDPOINT_INTR_NOTIFICATION  (1 << 4)
+
 #define USB_ENDPOINT_SYNCTYPE           0x0c
 #define USB_ENDPOINT_SYNC_NONE          (0 << 2)
 #define USB_ENDPOINT_SYNC_ASYNC         (1 << 2)
@@ -594,6 +599,12 @@ static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
         return __le16_to_cpu(epd->wMaxPacketSize);
 }
 
+static inline int usb_endpoint_interrupt_type(
+                const struct usb_endpoint_descriptor *epd)
+{
+        return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
+}
+
 /*-------------------------------------------------------------------------*/
 
 /* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
@@ -935,6 +946,51 @@ enum usb_device_state {
          */
 };
 
+enum usb3_link_state {
+        USB3_LPM_U0 = 0,
+        USB3_LPM_U1,
+        USB3_LPM_U2,
+        USB3_LPM_U3
+};
+
+/*
+ * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
+ * 0xff means the parent hub will accept transitions to U1, but will not
+ * initiate a transition.
+ *
+ * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
+ * U1 after that many microseconds.  Timeouts of 0x80 to 0xFE are reserved
+ * values.
+ *
+ * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
+ * 0xff means the parent hub will accept transitions to U2, but will not
+ * initiate a transition.
+ *
+ * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
+ * U2 after N*256 microseconds.  Therefore a U2 timeout value of 0x1 means a U2
+ * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
+ * 65.024ms.
+ */
+#define USB3_LPM_DISABLED               0x0
+#define USB3_LPM_U1_MAX_TIMEOUT         0x7F
+#define USB3_LPM_U2_MAX_TIMEOUT         0xFE
+#define USB3_LPM_DEVICE_INITIATED       0xFF
+
+struct usb_set_sel_req {
+        __u8    u1_sel;
+        __u8    u1_pel;
+        __le16  u2_sel;
+        __le16  u2_pel;
+} __attribute__ ((packed));
+
+/*
+ * The Set System Exit Latency control transfer provides one byte each for
+ * U1 SEL and U1 PEL, so the max exit latency is 0xFF.  U2 SEL and U2 PEL each
+ * are two bytes long.
+ */
+#define USB3_LPM_MAX_U1_SEL_PEL         0xFF
+#define USB3_LPM_MAX_U2_SEL_PEL         0xFFFF
+
 /*-------------------------------------------------------------------------*/
 
 /*
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index bbb946437070..7f855d50cdf5 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -344,6 +344,15 @@ struct hc_driver {
                  */
         int     (*update_device)(struct usb_hcd *, struct usb_device *);
         int     (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
+        /* USB 3.0 Link Power Management */
+                /* Returns the USB3 hub-encoded value for the U1/U2 timeout. */
+        int     (*enable_usb3_lpm_timeout)(struct usb_hcd *,
+                        struct usb_device *, enum usb3_link_state state);
+                /* The xHCI host controller can still fail the command to
+                 * disable the LPM timeouts, so this can return an error code.
+                 */
+        int     (*disable_usb3_lpm_timeout)(struct usb_hcd *,
+                        struct usb_device *, enum usb3_link_state state);
 };
 
 extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);