Merge branch 'disintegrate-asm-generic' of git://git.infradead.org/users/dhowells/linux-headers into asm-generic

Patches from David Howells <dhowells@redhat.com>:

This is to complete part of the UAPI disintegration for which the
preparatory patches were pulled recently.

Note that there are some fixup patches which are at the base of the
branch aimed at you, plus all arches get the asm-generic branch merged in too.

* 'disintegrate-asm-generic' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/asm-generic
  UAPI: Fix conditional header installation handling (notably kvm_para.h on m68k)
  c6x: remove c6x signal.h
  UAPI: Split compound conditionals containing __KERNEL__ in Arm64
  UAPI: Fix the guards on various asm/unistd.h files

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 233 insertions, 0 deletions

diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
new file mode 100644
index 000000000000..06b5bae35b29
--- /dev/null
+++ b/include/linux/usb/phy.h
@@ -0,0 +1,233 @@
+/* USB OTG (On The Go) defines */
+/*
+ *
+ * These APIs may be used between USB controllers.  USB device drivers
+ * (for either host or peripheral roles) don't use these calls; they
+ * continue to use just usb_device and usb_gadget.
+ */
+
+#ifndef __LINUX_USB_PHY_H
+#define __LINUX_USB_PHY_H
+
+#include <linux/notifier.h>
+
+enum usb_phy_events {
+        USB_EVENT_NONE,         /* no events or cable disconnected */
+        USB_EVENT_VBUS,         /* vbus valid event */
+        USB_EVENT_ID,           /* id was grounded */
+        USB_EVENT_CHARGER,      /* usb dedicated charger */
+        USB_EVENT_ENUMERATED,   /* gadget driver enumerated */
+};
+
+/* associate a type with PHY */
+enum usb_phy_type {
+        USB_PHY_TYPE_UNDEFINED,
+        USB_PHY_TYPE_USB2,
+        USB_PHY_TYPE_USB3,
+};
+
+/* OTG defines lots of enumeration states before device reset */
+enum usb_otg_state {
+        OTG_STATE_UNDEFINED = 0,
+
+        /* single-role peripheral, and dual-role default-b */
+        OTG_STATE_B_IDLE,
+        OTG_STATE_B_SRP_INIT,
+        OTG_STATE_B_PERIPHERAL,
+
+        /* extra dual-role default-b states */
+        OTG_STATE_B_WAIT_ACON,
+        OTG_STATE_B_HOST,
+
+        /* dual-role default-a */
+        OTG_STATE_A_IDLE,
+        OTG_STATE_A_WAIT_VRISE,
+        OTG_STATE_A_WAIT_BCON,
+        OTG_STATE_A_HOST,
+        OTG_STATE_A_SUSPEND,
+        OTG_STATE_A_PERIPHERAL,
+        OTG_STATE_A_WAIT_VFALL,
+        OTG_STATE_A_VBUS_ERR,
+};
+
+struct usb_phy;
+struct usb_otg;
+
+/* for transceivers connected thru an ULPI interface, the user must
+ * provide access ops
+ */
+struct usb_phy_io_ops {
+        int (*read)(struct usb_phy *x, u32 reg);
+        int (*write)(struct usb_phy *x, u32 val, u32 reg);
+};
+
+struct usb_phy {
+        struct device           *dev;
+        const char              *label;
+        unsigned int             flags;
+
+        enum usb_phy_type       type;
+        enum usb_otg_state      state;
+        enum usb_phy_events     last_event;
+
+        struct usb_otg          *otg;
+
+        struct device           *io_dev;
+        struct usb_phy_io_ops   *io_ops;
+        void __iomem            *io_priv;
+
+        /* for notification of usb_phy_events */
+        struct atomic_notifier_head     notifier;
+
+        /* to pass extra port status to the root hub */
+        u16                     port_status;
+        u16                     port_change;
+
+        /* to support controllers that have multiple transceivers */
+        struct list_head        head;
+
+        /* initialize/shutdown the OTG controller */
+        int     (*init)(struct usb_phy *x);
+        void    (*shutdown)(struct usb_phy *x);
+
+        /* effective for B devices, ignored for A-peripheral */
+        int     (*set_power)(struct usb_phy *x,
+                                unsigned mA);
+
+        /* for non-OTG B devices: set transceiver into suspend mode */
+        int     (*set_suspend)(struct usb_phy *x,
+                                int suspend);
+
+        /* notify phy connect status change */
+        int     (*notify_connect)(struct usb_phy *x, int port);
+        int     (*notify_disconnect)(struct usb_phy *x, int port);
+};
+
+
+/* for board-specific init logic */
+extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type);
+extern void usb_remove_phy(struct usb_phy *);
+
+/* helpers for direct access thru low-level io interface */
+static inline int usb_phy_io_read(struct usb_phy *x, u32 reg)
+{
+        if (x->io_ops && x->io_ops->read)
+                return x->io_ops->read(x, reg);
+
+        return -EINVAL;
+}
+
+static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg)
+{
+        if (x->io_ops && x->io_ops->write)
+                return x->io_ops->write(x, val, reg);
+
+        return -EINVAL;
+}
+
+static inline int
+usb_phy_init(struct usb_phy *x)
+{
+        if (x->init)
+                return x->init(x);
+
+        return 0;
+}
+
+static inline void
+usb_phy_shutdown(struct usb_phy *x)
+{
+        if (x->shutdown)
+                x->shutdown(x);
+}
+
+/* for usb host and peripheral controller drivers */
+#ifdef CONFIG_USB_OTG_UTILS
+extern struct usb_phy *usb_get_phy(enum usb_phy_type type);
+extern struct usb_phy *devm_usb_get_phy(struct device *dev,
+        enum usb_phy_type type);
+extern void usb_put_phy(struct usb_phy *);
+extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x);
+#else
+static inline struct usb_phy *usb_get_phy(enum usb_phy_type type)
+{
+        return NULL;
+}
+
+static inline struct usb_phy *devm_usb_get_phy(struct device *dev,
+        enum usb_phy_type type)
+{
+        return NULL;
+}
+
+static inline void usb_put_phy(struct usb_phy *x)
+{
+}
+
+static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x)
+{
+}
+
+#endif
+
+static inline int
+usb_phy_set_power(struct usb_phy *x, unsigned mA)
+{
+        if (x && x->set_power)
+                return x->set_power(x, mA);
+        return 0;
+}
+
+/* Context: can sleep */
+static inline int
+usb_phy_set_suspend(struct usb_phy *x, int suspend)
+{
+        if (x->set_suspend != NULL)
+                return x->set_suspend(x, suspend);
+        else
+                return 0;
+}
+
+static inline int
+usb_phy_notify_connect(struct usb_phy *x, int port)
+{
+        if (x->notify_connect)
+                return x->notify_connect(x, port);
+        else
+                return 0;
+}