aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/usb.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/linux/usb.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'include/linux/usb.h')
-rw-r--r--include/linux/usb.h1157
1 files changed, 1157 insertions, 0 deletions
diff --git a/include/linux/usb.h b/include/linux/usb.h
new file mode 100644
index 000000000000..c96728435935
--- /dev/null
+++ b/include/linux/usb.h
@@ -0,0 +1,1157 @@
1#ifndef __LINUX_USB_H
2#define __LINUX_USB_H
3
4#include <linux/mod_devicetable.h>
5#include <linux/usb_ch9.h>
6
7#define USB_MAJOR 180
8
9
10#ifdef __KERNEL__
11
12#include <linux/config.h>
13#include <linux/errno.h> /* for -ENODEV */
14#include <linux/delay.h> /* for mdelay() */
15#include <linux/interrupt.h> /* for in_interrupt() */
16#include <linux/list.h> /* for struct list_head */
17#include <linux/kref.h> /* for struct kref */
18#include <linux/device.h> /* for struct device */
19#include <linux/fs.h> /* for struct file_operations */
20#include <linux/completion.h> /* for struct completion */
21#include <linux/sched.h> /* for current && schedule_timeout */
22
23struct usb_device;
24struct usb_driver;
25
26/*-------------------------------------------------------------------------*/
27
28/*
29 * Host-side wrappers for standard USB descriptors ... these are parsed
30 * from the data provided by devices. Parsing turns them from a flat
31 * sequence of descriptors into a hierarchy:
32 *
33 * - devices have one (usually) or more configs;
34 * - configs have one (often) or more interfaces;
35 * - interfaces have one (usually) or more settings;
36 * - each interface setting has zero or (usually) more endpoints.
37 *
38 * And there might be other descriptors mixed in with those.
39 *
40 * Devices may also have class-specific or vendor-specific descriptors.
41 */
42
43/**
44 * struct usb_host_endpoint - host-side endpoint descriptor and queue
45 * @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder
46 * @urb_list: urbs queued to this endpoint; maintained by usbcore
47 * @hcpriv: for use by HCD; typically holds hardware dma queue head (QH)
48 * with one or more transfer descriptors (TDs) per urb
49 * @extra: descriptors following this endpoint in the configuration
50 * @extralen: how many bytes of "extra" are valid
51 *
52 * USB requests are always queued to a given endpoint, identified by a
53 * descriptor within an active interface in a given USB configuration.
54 */
55struct usb_host_endpoint {
56 struct usb_endpoint_descriptor desc;
57 struct list_head urb_list;
58 void *hcpriv;
59
60 unsigned char *extra; /* Extra descriptors */
61 int extralen;
62};
63
64/* host-side wrapper for one interface setting's parsed descriptors */
65struct usb_host_interface {
66 struct usb_interface_descriptor desc;
67
68 /* array of desc.bNumEndpoint endpoints associated with this
69 * interface setting. these will be in no particular order.
70 */
71 struct usb_host_endpoint *endpoint;
72
73 char *string; /* iInterface string, if present */
74 unsigned char *extra; /* Extra descriptors */
75 int extralen;
76};
77
78enum usb_interface_condition {
79 USB_INTERFACE_UNBOUND = 0,
80 USB_INTERFACE_BINDING,
81 USB_INTERFACE_BOUND,
82 USB_INTERFACE_UNBINDING,
83};
84
85/**
86 * struct usb_interface - what usb device drivers talk to
87 * @altsetting: array of interface structures, one for each alternate
88 * setting that may be selected. Each one includes a set of
89 * endpoint configurations. They will be in no particular order.
90 * @num_altsetting: number of altsettings defined.
91 * @cur_altsetting: the current altsetting.
92 * @driver: the USB driver that is bound to this interface.
93 * @minor: the minor number assigned to this interface, if this
94 * interface is bound to a driver that uses the USB major number.
95 * If this interface does not use the USB major, this field should
96 * be unused. The driver should set this value in the probe()
97 * function of the driver, after it has been assigned a minor
98 * number from the USB core by calling usb_register_dev().
99 * @condition: binding state of the interface: not bound, binding
100 * (in probe()), bound to a driver, or unbinding (in disconnect())
101 * @dev: driver model's view of this device
102 * @class_dev: driver model's class view of this device.
103 *
104 * USB device drivers attach to interfaces on a physical device. Each
105 * interface encapsulates a single high level function, such as feeding
106 * an audio stream to a speaker or reporting a change in a volume control.
107 * Many USB devices only have one interface. The protocol used to talk to
108 * an interface's endpoints can be defined in a usb "class" specification,
109 * or by a product's vendor. The (default) control endpoint is part of
110 * every interface, but is never listed among the interface's descriptors.
111 *
112 * The driver that is bound to the interface can use standard driver model
113 * calls such as dev_get_drvdata() on the dev member of this structure.
114 *
115 * Each interface may have alternate settings. The initial configuration
116 * of a device sets altsetting 0, but the device driver can change
117 * that setting using usb_set_interface(). Alternate settings are often
118 * used to control the the use of periodic endpoints, such as by having
119 * different endpoints use different amounts of reserved USB bandwidth.
120 * All standards-conformant USB devices that use isochronous endpoints
121 * will use them in non-default settings.
122 *
123 * The USB specification says that alternate setting numbers must run from
124 * 0 to one less than the total number of alternate settings. But some
125 * devices manage to mess this up, and the structures aren't necessarily
126 * stored in numerical order anyhow. Use usb_altnum_to_altsetting() to
127 * look up an alternate setting in the altsetting array based on its number.
128 */
129struct usb_interface {
130 /* array of alternate settings for this interface,
131 * stored in no particular order */
132 struct usb_host_interface *altsetting;
133
134 struct usb_host_interface *cur_altsetting; /* the currently
135 * active alternate setting */
136 unsigned num_altsetting; /* number of alternate settings */
137
138 int minor; /* minor number this interface is bound to */
139 enum usb_interface_condition condition; /* state of binding */
140 struct device dev; /* interface specific device info */
141 struct class_device *class_dev;
142};
143#define to_usb_interface(d) container_of(d, struct usb_interface, dev)
144#define interface_to_usbdev(intf) \
145 container_of(intf->dev.parent, struct usb_device, dev)
146
147static inline void *usb_get_intfdata (struct usb_interface *intf)
148{
149 return dev_get_drvdata (&intf->dev);
150}
151
152static inline void usb_set_intfdata (struct usb_interface *intf, void *data)
153{
154 dev_set_drvdata(&intf->dev, data);
155}
156
157struct usb_interface *usb_get_intf(struct usb_interface *intf);
158void usb_put_intf(struct usb_interface *intf);
159
160/* this maximum is arbitrary */
161#define USB_MAXINTERFACES 32
162
163/**
164 * struct usb_interface_cache - long-term representation of a device interface
165 * @num_altsetting: number of altsettings defined.
166 * @ref: reference counter.
167 * @altsetting: variable-length array of interface structures, one for
168 * each alternate setting that may be selected. Each one includes a
169 * set of endpoint configurations. They will be in no particular order.
170 *
171 * These structures persist for the lifetime of a usb_device, unlike
172 * struct usb_interface (which persists only as long as its configuration
173 * is installed). The altsetting arrays can be accessed through these
174 * structures at any time, permitting comparison of configurations and
175 * providing support for the /proc/bus/usb/devices pseudo-file.
176 */
177struct usb_interface_cache {
178 unsigned num_altsetting; /* number of alternate settings */
179 struct kref ref; /* reference counter */
180
181 /* variable-length array of alternate settings for this interface,
182 * stored in no particular order */
183 struct usb_host_interface altsetting[0];
184};
185#define ref_to_usb_interface_cache(r) \
186 container_of(r, struct usb_interface_cache, ref)
187#define altsetting_to_usb_interface_cache(a) \
188 container_of(a, struct usb_interface_cache, altsetting[0])
189
190/**
191 * struct usb_host_config - representation of a device's configuration
192 * @desc: the device's configuration descriptor.
193 * @string: pointer to the cached version of the iConfiguration string, if
194 * present for this configuration.
195 * @interface: array of pointers to usb_interface structures, one for each
196 * interface in the configuration. The number of interfaces is stored
197 * in desc.bNumInterfaces. These pointers are valid only while the
198 * the configuration is active.
199 * @intf_cache: array of pointers to usb_interface_cache structures, one
200 * for each interface in the configuration. These structures exist
201 * for the entire life of the device.
202 * @extra: pointer to buffer containing all extra descriptors associated
203 * with this configuration (those preceding the first interface
204 * descriptor).
205 * @extralen: length of the extra descriptors buffer.
206 *
207 * USB devices may have multiple configurations, but only one can be active
208 * at any time. Each encapsulates a different operational environment;
209 * for example, a dual-speed device would have separate configurations for
210 * full-speed and high-speed operation. The number of configurations
211 * available is stored in the device descriptor as bNumConfigurations.
212 *
213 * A configuration can contain multiple interfaces. Each corresponds to
214 * a different function of the USB device, and all are available whenever
215 * the configuration is active. The USB standard says that interfaces
216 * are supposed to be numbered from 0 to desc.bNumInterfaces-1, but a lot
217 * of devices get this wrong. In addition, the interface array is not
218 * guaranteed to be sorted in numerical order. Use usb_ifnum_to_if() to
219 * look up an interface entry based on its number.
220 *
221 * Device drivers should not attempt to activate configurations. The choice
222 * of which configuration to install is a policy decision based on such
223 * considerations as available power, functionality provided, and the user's
224 * desires (expressed through hotplug scripts). However, drivers can call
225 * usb_reset_configuration() to reinitialize the current configuration and
226 * all its interfaces.
227 */
228struct usb_host_config {
229 struct usb_config_descriptor desc;
230
231 char *string;
232 /* the interfaces associated with this configuration,
233 * stored in no particular order */
234 struct usb_interface *interface[USB_MAXINTERFACES];
235
236 /* Interface information available even when this is not the
237 * active configuration */
238 struct usb_interface_cache *intf_cache[USB_MAXINTERFACES];
239
240 unsigned char *extra; /* Extra descriptors */
241 int extralen;
242};
243
244int __usb_get_extra_descriptor(char *buffer, unsigned size,
245 unsigned char type, void **ptr);
246#define usb_get_extra_descriptor(ifpoint,type,ptr)\
247 __usb_get_extra_descriptor((ifpoint)->extra,(ifpoint)->extralen,\
248 type,(void**)ptr)
249
250/* -------------------------------------------------------------------------- */
251
252struct usb_operations;
253
254/* USB device number allocation bitmap */
255struct usb_devmap {
256 unsigned long devicemap[128 / (8*sizeof(unsigned long))];
257};
258
259/*
260 * Allocated per bus (tree of devices) we have:
261 */
262struct usb_bus {
263 struct device *controller; /* host/master side hardware */
264 int busnum; /* Bus number (in order of reg) */
265 char *bus_name; /* stable id (PCI slot_name etc) */
266 u8 otg_port; /* 0, or number of OTG/HNP port */
267 unsigned is_b_host:1; /* true during some HNP roleswitches */
268 unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */
269
270 int devnum_next; /* Next open device number in round-robin allocation */
271
272 struct usb_devmap devmap; /* device address allocation map */
273 struct usb_operations *op; /* Operations (specific to the HC) */
274 struct usb_device *root_hub; /* Root hub */
275 struct list_head bus_list; /* list of busses */
276 void *hcpriv; /* Host Controller private data */
277
278 int bandwidth_allocated; /* on this bus: how much of the time
279 * reserved for periodic (intr/iso)
280 * requests is used, on average?
281 * Units: microseconds/frame.
282 * Limits: Full/low speed reserve 90%,
283 * while high speed reserves 80%.
284 */
285 int bandwidth_int_reqs; /* number of Interrupt requests */
286 int bandwidth_isoc_reqs; /* number of Isoc. requests */
287
288 struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */
289
290 struct class_device class_dev; /* class device for this bus */
291 void (*release)(struct usb_bus *bus); /* function to destroy this bus's memory */
292#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
293 struct mon_bus *mon_bus; /* non-null when associated */
294 int monitored; /* non-zero when monitored */
295#endif
296};
297#define to_usb_bus(d) container_of(d, struct usb_bus, class_dev)
298
299
300/* -------------------------------------------------------------------------- */
301
302/* This is arbitrary.
303 * From USB 2.0 spec Table 11-13, offset 7, a hub can
304 * have up to 255 ports. The most yet reported is 10.
305 */
306#define USB_MAXCHILDREN (16)
307
308struct usb_tt;
309
310/*
311 * struct usb_device - kernel's representation of a USB device
312 *
313 * FIXME: Write the kerneldoc!
314 *
315 * Usbcore drivers should not set usbdev->state directly. Instead use
316 * usb_set_device_state().
317 */
318struct usb_device {
319 int devnum; /* Address on USB bus */
320 char devpath [16]; /* Use in messages: /port/port/... */
321 enum usb_device_state state; /* configured, not attached, etc */
322 enum usb_device_speed speed; /* high/full/low (or error) */
323
324 struct usb_tt *tt; /* low/full speed dev, highspeed hub */
325 int ttport; /* device port on that tt hub */
326
327 struct semaphore serialize;
328
329 unsigned int toggle[2]; /* one bit for each endpoint ([0] = IN, [1] = OUT) */
330
331 struct usb_device *parent; /* our hub, unless we're the root */
332 struct usb_bus *bus; /* Bus we're part of */
333 struct usb_host_endpoint ep0;
334
335 struct device dev; /* Generic device interface */
336
337 struct usb_device_descriptor descriptor;/* Descriptor */
338 struct usb_host_config *config; /* All of the configs */
339
340 struct usb_host_config *actconfig;/* the active configuration */
341 struct usb_host_endpoint *ep_in[16];
342 struct usb_host_endpoint *ep_out[16];
343
344 char **rawdescriptors; /* Raw descriptors for each config */
345
346 int have_langid; /* whether string_langid is valid yet */
347 int string_langid; /* language ID for strings */
348
349 char *product;
350 char *manufacturer;
351 char *serial; /* static strings from the device */
352 struct list_head filelist;
353 struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */
354
355 /*
356 * Child devices - these can be either new devices
357 * (if this is a hub device), or different instances
358 * of this same device.
359 *
360 * Each instance needs its own set of data structures.
361 */
362
363 int maxchild; /* Number of ports if hub */
364 struct usb_device *children[USB_MAXCHILDREN];
365};
366#define to_usb_device(d) container_of(d, struct usb_device, dev)
367
368extern struct usb_device *usb_get_dev(struct usb_device *dev);
369extern void usb_put_dev(struct usb_device *dev);
370
371extern void usb_lock_device(struct usb_device *udev);
372extern int usb_trylock_device(struct usb_device *udev);
373extern int usb_lock_device_for_reset(struct usb_device *udev,
374 struct usb_interface *iface);
375extern void usb_unlock_device(struct usb_device *udev);
376
377/* USB port reset for device reinitialization */
378extern int usb_reset_device(struct usb_device *dev);
379
380extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
381
382/*-------------------------------------------------------------------------*/
383
384/* for drivers using iso endpoints */
385extern int usb_get_current_frame_number (struct usb_device *usb_dev);
386
387/* used these for multi-interface device registration */
388extern int usb_driver_claim_interface(struct usb_driver *driver,
389 struct usb_interface *iface, void* priv);
390
391/**
392 * usb_interface_claimed - returns true iff an interface is claimed
393 * @iface: the interface being checked
394 *
395 * Returns true (nonzero) iff the interface is claimed, else false (zero).
396 * Callers must own the driver model's usb bus readlock. So driver
397 * probe() entries don't need extra locking, but other call contexts
398 * may need to explicitly claim that lock.
399 *
400 */
401static inline int usb_interface_claimed(struct usb_interface *iface) {
402 return (iface->dev.driver != NULL);
403}
404
405extern void usb_driver_release_interface(struct usb_driver *driver,
406 struct usb_interface *iface);
407const struct usb_device_id *usb_match_id(struct usb_interface *interface,
408 const struct usb_device_id *id);
409
410extern struct usb_interface *usb_find_interface(struct usb_driver *drv,
411 int minor);
412extern struct usb_interface *usb_ifnum_to_if(struct usb_device *dev,
413 unsigned ifnum);
414extern struct usb_host_interface *usb_altnum_to_altsetting(
415 struct usb_interface *intf, unsigned int altnum);
416
417
418/**
419 * usb_make_path - returns stable device path in the usb tree
420 * @dev: the device whose path is being constructed
421 * @buf: where to put the string
422 * @size: how big is "buf"?
423 *
424 * Returns length of the string (> 0) or negative if size was too small.
425 *
426 * This identifier is intended to be "stable", reflecting physical paths in
427 * hardware such as physical bus addresses for host controllers or ports on
428 * USB hubs. That makes it stay the same until systems are physically
429 * reconfigured, by re-cabling a tree of USB devices or by moving USB host
430 * controllers. Adding and removing devices, including virtual root hubs
431 * in host controller driver modules, does not change these path identifers;
432 * neither does rebooting or re-enumerating. These are more useful identifiers
433 * than changeable ("unstable") ones like bus numbers or device addresses.
434 *
435 * With a partial exception for devices connected to USB 2.0 root hubs, these
436 * identifiers are also predictable. So long as the device tree isn't changed,
437 * plugging any USB device into a given hub port always gives it the same path.
438 * Because of the use of "companion" controllers, devices connected to ports on
439 * USB 2.0 root hubs (EHCI host controllers) will get one path ID if they are
440 * high speed, and a different one if they are full or low speed.
441 */
442static inline int usb_make_path (struct usb_device *dev, char *buf, size_t size)
443{
444 int actual;
445 actual = snprintf (buf, size, "usb-%s-%s", dev->bus->bus_name, dev->devpath);
446 return (actual >= (int)size) ? -1 : actual;
447}
448
449/*-------------------------------------------------------------------------*/
450
451#define USB_DEVICE_ID_MATCH_DEVICE (USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT)
452#define USB_DEVICE_ID_MATCH_DEV_RANGE (USB_DEVICE_ID_MATCH_DEV_LO | USB_DEVICE_ID_MATCH_DEV_HI)
453#define USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_RANGE)
454#define USB_DEVICE_ID_MATCH_DEV_INFO \
455 (USB_DEVICE_ID_MATCH_DEV_CLASS | USB_DEVICE_ID_MATCH_DEV_SUBCLASS | USB_DEVICE_ID_MATCH_DEV_PROTOCOL)
456#define USB_DEVICE_ID_MATCH_INT_INFO \
457 (USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS | USB_DEVICE_ID_MATCH_INT_PROTOCOL)
458
459/**
460 * USB_DEVICE - macro used to describe a specific usb device
461 * @vend: the 16 bit USB Vendor ID
462 * @prod: the 16 bit USB Product ID
463 *
464 * This macro is used to create a struct usb_device_id that matches a
465 * specific device.
466 */
467#define USB_DEVICE(vend,prod) \
468 .match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = (vend), .idProduct = (prod)
469/**
470 * USB_DEVICE_VER - macro used to describe a specific usb device with a version range
471 * @vend: the 16 bit USB Vendor ID
472 * @prod: the 16 bit USB Product ID
473 * @lo: the bcdDevice_lo value
474 * @hi: the bcdDevice_hi value
475 *
476 * This macro is used to create a struct usb_device_id that matches a
477 * specific device, with a version range.
478 */
479#define USB_DEVICE_VER(vend,prod,lo,hi) \
480 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, .idVendor = (vend), .idProduct = (prod), .bcdDevice_lo = (lo), .bcdDevice_hi = (hi)
481
482/**
483 * USB_DEVICE_INFO - macro used to describe a class of usb devices
484 * @cl: bDeviceClass value
485 * @sc: bDeviceSubClass value
486 * @pr: bDeviceProtocol value
487 *
488 * This macro is used to create a struct usb_device_id that matches a
489 * specific class of devices.
490 */
491#define USB_DEVICE_INFO(cl,sc,pr) \
492 .match_flags = USB_DEVICE_ID_MATCH_DEV_INFO, .bDeviceClass = (cl), .bDeviceSubClass = (sc), .bDeviceProtocol = (pr)
493
494/**
495 * USB_INTERFACE_INFO - macro used to describe a class of usb interfaces
496 * @cl: bInterfaceClass value
497 * @sc: bInterfaceSubClass value
498 * @pr: bInterfaceProtocol value
499 *
500 * This macro is used to create a struct usb_device_id that matches a
501 * specific class of interfaces.
502 */
503#define USB_INTERFACE_INFO(cl,sc,pr) \
504 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO, .bInterfaceClass = (cl), .bInterfaceSubClass = (sc), .bInterfaceProtocol = (pr)
505
506/* -------------------------------------------------------------------------- */
507
508/**
509 * struct usb_driver - identifies USB driver to usbcore
510 * @owner: Pointer to the module owner of this driver; initialize
511 * it using THIS_MODULE.
512 * @name: The driver name should be unique among USB drivers,
513 * and should normally be the same as the module name.
514 * @probe: Called to see if the driver is willing to manage a particular
515 * interface on a device. If it is, probe returns zero and uses
516 * dev_set_drvdata() to associate driver-specific data with the
517 * interface. It may also use usb_set_interface() to specify the
518 * appropriate altsetting. If unwilling to manage the interface,
519 * return a negative errno value.
520 * @disconnect: Called when the interface is no longer accessible, usually
521 * because its device has been (or is being) disconnected or the
522 * driver module is being unloaded.
523 * @ioctl: Used for drivers that want to talk to userspace through
524 * the "usbfs" filesystem. This lets devices provide ways to
525 * expose information to user space regardless of where they
526 * do (or don't) show up otherwise in the filesystem.
527 * @suspend: Called when the device is going to be suspended by the system.
528 * @resume: Called when the device is being resumed by the system.
529 * @id_table: USB drivers use ID table to support hotplugging.
530 * Export this with MODULE_DEVICE_TABLE(usb,...). This must be set
531 * or your driver's probe function will never get called.
532 * @driver: the driver model core driver structure.
533 *
534 * USB drivers must provide a name, probe() and disconnect() methods,
535 * and an id_table. Other driver fields are optional.
536 *
537 * The id_table is used in hotplugging. It holds a set of descriptors,
538 * and specialized data may be associated with each entry. That table
539 * is used by both user and kernel mode hotplugging support.
540 *
541 * The probe() and disconnect() methods are called in a context where
542 * they can sleep, but they should avoid abusing the privilege. Most
543 * work to connect to a device should be done when the device is opened,
544 * and undone at the last close. The disconnect code needs to address
545 * concurrency issues with respect to open() and close() methods, as
546 * well as forcing all pending I/O requests to complete (by unlinking
547 * them as necessary, and blocking until the unlinks complete).
548 */
549struct usb_driver {
550 struct module *owner;
551
552 const char *name;
553
554 int (*probe) (struct usb_interface *intf,
555 const struct usb_device_id *id);
556
557 void (*disconnect) (struct usb_interface *intf);
558
559 int (*ioctl) (struct usb_interface *intf, unsigned int code, void *buf);
560
561 int (*suspend) (struct usb_interface *intf, u32 state);
562 int (*resume) (struct usb_interface *intf);
563
564 const struct usb_device_id *id_table;
565
566 struct device_driver driver;
567};
568#define to_usb_driver(d) container_of(d, struct usb_driver, driver)
569
570extern struct bus_type usb_bus_type;
571
572/**
573 * struct usb_class_driver - identifies a USB driver that wants to use the USB major number
574 * @name: devfs name for this driver. Will also be used by the driver
575 * class code to create a usb class device.
576 * @fops: pointer to the struct file_operations of this driver.
577 * @mode: the mode for the devfs file to be created for this driver.
578 * @minor_base: the start of the minor range for this driver.
579 *
580 * This structure is used for the usb_register_dev() and
581 * usb_unregister_dev() functions, to consolidate a number of the
582 * parameters used for them.
583 */
584struct usb_class_driver {
585 char *name;
586 struct file_operations *fops;
587 mode_t mode;
588 int minor_base;
589};
590
591/*
592 * use these in module_init()/module_exit()
593 * and don't forget MODULE_DEVICE_TABLE(usb, ...)
594 */
595extern int usb_register(struct usb_driver *);
596extern void usb_deregister(struct usb_driver *);
597
598extern int usb_register_dev(struct usb_interface *intf,
599 struct usb_class_driver *class_driver);
600extern void usb_deregister_dev(struct usb_interface *intf,
601 struct usb_class_driver *class_driver);
602
603extern int usb_disabled(void);
604
605/* -------------------------------------------------------------------------- */
606
607/*
608 * URB support, for asynchronous request completions
609 */
610
611/*
612 * urb->transfer_flags:
613 */
614#define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */
615#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame ignored */
616#define URB_NO_TRANSFER_DMA_MAP 0x0004 /* urb->transfer_dma valid on submit */
617#define URB_NO_SETUP_DMA_MAP 0x0008 /* urb->setup_dma valid on submit */
618#define URB_ASYNC_UNLINK 0x0010 /* usb_unlink_urb() returns asap */
619#define URB_NO_FSBR 0x0020 /* UHCI-specific */
620#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUTs with short packet */
621#define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt needed */
622
623struct usb_iso_packet_descriptor {
624 unsigned int offset;
625 unsigned int length; /* expected length */
626 unsigned int actual_length;
627 unsigned int status;
628};
629
630struct urb;
631struct pt_regs;
632
633typedef void (*usb_complete_t)(struct urb *, struct pt_regs *);
634
635/**
636 * struct urb - USB Request Block
637 * @urb_list: For use by current owner of the URB.
638 * @pipe: Holds endpoint number, direction, type, and more.
639 * Create these values with the eight macros available;
640 * usb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is "ctrl"
641 * (control), "bulk", "int" (interrupt), or "iso" (isochronous).
642 * For example usb_sndbulkpipe() or usb_rcvintpipe(). Endpoint
643 * numbers range from zero to fifteen. Note that "in" endpoint two
644 * is a different endpoint (and pipe) from "out" endpoint two.
645 * The current configuration controls the existence, type, and
646 * maximum packet size of any given endpoint.
647 * @dev: Identifies the USB device to perform the request.
648 * @status: This is read in non-iso completion functions to get the
649 * status of the particular request. ISO requests only use it
650 * to tell whether the URB was unlinked; detailed status for
651 * each frame is in the fields of the iso_frame-desc.
652 * @transfer_flags: A variety of flags may be used to affect how URB
653 * submission, unlinking, or operation are handled. Different
654 * kinds of URB can use different flags.
655 * @transfer_buffer: This identifies the buffer to (or from) which
656 * the I/O request will be performed (unless URB_NO_TRANSFER_DMA_MAP
657 * is set). This buffer must be suitable for DMA; allocate it with
658 * kmalloc() or equivalent. For transfers to "in" endpoints, contents
659 * of this buffer will be modified. This buffer is used for the data
660 * stage of control transfers.
661 * @transfer_dma: When transfer_flags includes URB_NO_TRANSFER_DMA_MAP,
662 * the device driver is saying that it provided this DMA address,
663 * which the host controller driver should use in preference to the
664 * transfer_buffer.
665 * @transfer_buffer_length: How big is transfer_buffer. The transfer may
666 * be broken up into chunks according to the current maximum packet
667 * size for the endpoint, which is a function of the configuration
668 * and is encoded in the pipe. When the length is zero, neither
669 * transfer_buffer nor transfer_dma is used.
670 * @actual_length: This is read in non-iso completion functions, and
671 * it tells how many bytes (out of transfer_buffer_length) were
672 * transferred. It will normally be the same as requested, unless
673 * either an error was reported or a short read was performed.
674 * The URB_SHORT_NOT_OK transfer flag may be used to make such
675 * short reads be reported as errors.
676 * @setup_packet: Only used for control transfers, this points to eight bytes
677 * of setup data. Control transfers always start by sending this data
678 * to the device. Then transfer_buffer is read or written, if needed.
679 * @setup_dma: For control transfers with URB_NO_SETUP_DMA_MAP set, the
680 * device driver has provided this DMA address for the setup packet.
681 * The host controller driver should use this in preference to
682 * setup_packet.
683 * @start_frame: Returns the initial frame for isochronous transfers.
684 * @number_of_packets: Lists the number of ISO transfer buffers.
685 * @interval: Specifies the polling interval for interrupt or isochronous
686 * transfers. The units are frames (milliseconds) for for full and low
687 * speed devices, and microframes (1/8 millisecond) for highspeed ones.
688 * @error_count: Returns the number of ISO transfers that reported errors.
689 * @context: For use in completion functions. This normally points to
690 * request-specific driver context.
691 * @complete: Completion handler. This URB is passed as the parameter to the
692 * completion function. The completion function may then do what
693 * it likes with the URB, including resubmitting or freeing it.
694 * @iso_frame_desc: Used to provide arrays of ISO transfer buffers and to
695 * collect the transfer status for each buffer.
696 *
697 * This structure identifies USB transfer requests. URBs must be allocated by
698 * calling usb_alloc_urb() and freed with a call to usb_free_urb().
699 * Initialization may be done using various usb_fill_*_urb() functions. URBs
700 * are submitted using usb_submit_urb(), and pending requests may be canceled
701 * using usb_unlink_urb() or usb_kill_urb().
702 *
703 * Data Transfer Buffers:
704 *
705 * Normally drivers provide I/O buffers allocated with kmalloc() or otherwise
706 * taken from the general page pool. That is provided by transfer_buffer
707 * (control requests also use setup_packet), and host controller drivers
708 * perform a dma mapping (and unmapping) for each buffer transferred. Those
709 * mapping operations can be expensive on some platforms (perhaps using a dma
710 * bounce buffer or talking to an IOMMU),
711 * although they're cheap on commodity x86 and ppc hardware.
712 *
713 * Alternatively, drivers may pass the URB_NO_xxx_DMA_MAP transfer flags,
714 * which tell the host controller driver that no such mapping is needed since
715 * the device driver is DMA-aware. For example, a device driver might
716 * allocate a DMA buffer with usb_buffer_alloc() or call usb_buffer_map().
717 * When these transfer flags are provided, host controller drivers will
718 * attempt to use the dma addresses found in the transfer_dma and/or
719 * setup_dma fields rather than determining a dma address themselves. (Note
720 * that transfer_buffer and setup_packet must still be set because not all
721 * host controllers use DMA, nor do virtual root hubs).
722 *
723 * Initialization:
724 *
725 * All URBs submitted must initialize the dev, pipe, transfer_flags (may be
726 * zero), and complete fields.
727 * The URB_ASYNC_UNLINK transfer flag affects later invocations of
728 * the usb_unlink_urb() routine. Note: Failure to set URB_ASYNC_UNLINK
729 * with usb_unlink_urb() is deprecated. For synchronous unlinks use
730 * usb_kill_urb() instead.
731 *
732 * All URBs must also initialize
733 * transfer_buffer and transfer_buffer_length. They may provide the
734 * URB_SHORT_NOT_OK transfer flag, indicating that short reads are
735 * to be treated as errors; that flag is invalid for write requests.
736 *
737 * Bulk URBs may
738 * use the URB_ZERO_PACKET transfer flag, indicating that bulk OUT transfers
739 * should always terminate with a short packet, even if it means adding an
740 * extra zero length packet.
741 *
742 * Control URBs must provide a setup_packet. The setup_packet and
743 * transfer_buffer may each be mapped for DMA or not, independently of
744 * the other. The transfer_flags bits URB_NO_TRANSFER_DMA_MAP and
745 * URB_NO_SETUP_DMA_MAP indicate which buffers have already been mapped.
746 * URB_NO_SETUP_DMA_MAP is ignored for non-control URBs.
747 *
748 * Interrupt URBs must provide an interval, saying how often (in milliseconds
749 * or, for highspeed devices, 125 microsecond units)
750 * to poll for transfers. After the URB has been submitted, the interval
751 * field reflects how the transfer was actually scheduled.
752 * The polling interval may be more frequent than requested.
753 * For example, some controllers have a maximum interval of 32 milliseconds,
754 * while others support intervals of up to 1024 milliseconds.
755 * Isochronous URBs also have transfer intervals. (Note that for isochronous
756 * endpoints, as well as high speed interrupt endpoints, the encoding of
757 * the transfer interval in the endpoint descriptor is logarithmic.
758 * Device drivers must convert that value to linear units themselves.)
759 *
760 * Isochronous URBs normally use the URB_ISO_ASAP transfer flag, telling
761 * the host controller to schedule the transfer as soon as bandwidth
762 * utilization allows, and then set start_frame to reflect the actual frame
763 * selected during submission. Otherwise drivers must specify the start_frame
764 * and handle the case where the transfer can't begin then. However, drivers
765 * won't know how bandwidth is currently allocated, and while they can
766 * find the current frame using usb_get_current_frame_number () they can't
767 * know the range for that frame number. (Ranges for frame counter values
768 * are HC-specific, and can go from 256 to 65536 frames from "now".)
769 *
770 * Isochronous URBs have a different data transfer model, in part because
771 * the quality of service is only "best effort". Callers provide specially
772 * allocated URBs, with number_of_packets worth of iso_frame_desc structures
773 * at the end. Each such packet is an individual ISO transfer. Isochronous
774 * URBs are normally queued, submitted by drivers to arrange that
775 * transfers are at least double buffered, and then explicitly resubmitted
776 * in completion handlers, so
777 * that data (such as audio or video) streams at as constant a rate as the
778 * host controller scheduler can support.
779 *
780 * Completion Callbacks:
781 *
782 * The completion callback is made in_interrupt(), and one of the first
783 * things that a completion handler should do is check the status field.
784 * The status field is provided for all URBs. It is used to report
785 * unlinked URBs, and status for all non-ISO transfers. It should not
786 * be examined before the URB is returned to the completion handler.
787 *
788 * The context field is normally used to link URBs back to the relevant
789 * driver or request state.
790 *
791 * When the completion callback is invoked for non-isochronous URBs, the
792 * actual_length field tells how many bytes were transferred. This field
793 * is updated even when the URB terminated with an error or was unlinked.
794 *
795 * ISO transfer status is reported in the status and actual_length fields
796 * of the iso_frame_desc array, and the number of errors is reported in
797 * error_count. Completion callbacks for ISO transfers will normally
798 * (re)submit URBs to ensure a constant transfer rate.
799 */
800struct urb
801{
802 /* private, usb core and host controller only fields in the urb */
803 struct kref kref; /* reference count of the URB */
804 spinlock_t lock; /* lock for the URB */
805 void *hcpriv; /* private data for host controller */
806 struct list_head urb_list; /* list pointer to all active urbs */
807 int bandwidth; /* bandwidth for INT/ISO request */
808 atomic_t use_count; /* concurrent submissions counter */
809 u8 reject; /* submissions will fail */
810
811 /* public, documented fields in the urb that can be used by drivers */
812 struct usb_device *dev; /* (in) pointer to associated device */
813 unsigned int pipe; /* (in) pipe information */
814 int status; /* (return) non-ISO status */
815 unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/
816 void *transfer_buffer; /* (in) associated data buffer */
817 dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */
818 int transfer_buffer_length; /* (in) data buffer length */
819 int actual_length; /* (return) actual transfer length */
820 unsigned char *setup_packet; /* (in) setup packet (control only) */
821 dma_addr_t setup_dma; /* (in) dma addr for setup_packet */
822 int start_frame; /* (modify) start frame (ISO) */
823 int number_of_packets; /* (in) number of ISO packets */
824 int interval; /* (modify) transfer interval (INT/ISO) */
825 int error_count; /* (return) number of ISO errors */
826 void *context; /* (in) context for completion */
827 usb_complete_t complete; /* (in) completion routine */
828 struct usb_iso_packet_descriptor iso_frame_desc[0]; /* (in) ISO ONLY */
829};
830
831/* -------------------------------------------------------------------------- */
832
833/**
834 * usb_fill_control_urb - initializes a control urb
835 * @urb: pointer to the urb to initialize.
836 * @dev: pointer to the struct usb_device for this urb.
837 * @pipe: the endpoint pipe
838 * @setup_packet: pointer to the setup_packet buffer
839 * @transfer_buffer: pointer to the transfer buffer
840 * @buffer_length: length of the transfer buffer
841 * @complete: pointer to the usb_complete_t function
842 * @context: what to set the urb context to.
843 *
844 * Initializes a control urb with the proper information needed to submit
845 * it to a device.
846 */
847static inline void usb_fill_control_urb (struct urb *urb,
848 struct usb_device *dev,
849 unsigned int pipe,
850 unsigned char *setup_packet,
851 void *transfer_buffer,
852 int buffer_length,
853 usb_complete_t complete,
854 void *context)
855{
856 spin_lock_init(&urb->lock);
857 urb->dev = dev;
858 urb->pipe = pipe;
859 urb->setup_packet = setup_packet;
860 urb->transfer_buffer = transfer_buffer;
861 urb->transfer_buffer_length = buffer_length;
862 urb->complete = complete;
863 urb->context = context;
864}
865
866/**
867 * usb_fill_bulk_urb - macro to help initialize a bulk urb
868 * @urb: pointer to the urb to initialize.
869 * @dev: pointer to the struct usb_device for this urb.
870 * @pipe: the endpoint pipe
871 * @transfer_buffer: pointer to the transfer buffer
872 * @buffer_length: length of the transfer buffer
873 * @complete: pointer to the usb_complete_t function
874 * @context: what to set the urb context to.
875 *
876 * Initializes a bulk urb with the proper information needed to submit it
877 * to a device.
878 */
879static inline void usb_fill_bulk_urb (struct urb *urb,
880 struct usb_device *dev,
881 unsigned int pipe,
882 void *transfer_buffer,
883 int buffer_length,
884 usb_complete_t complete,
885 void *context)
886{
887 spin_lock_init(&urb->lock);
888 urb->dev = dev;
889 urb->pipe = pipe;
890 urb->transfer_buffer = transfer_buffer;
891 urb->transfer_buffer_length = buffer_length;
892 urb->complete = complete;
893 urb->context = context;
894}
895
896/**
897 * usb_fill_int_urb - macro to help initialize a interrupt urb
898 * @urb: pointer to the urb to initialize.
899 * @dev: pointer to the struct usb_device for this urb.
900 * @pipe: the endpoint pipe
901 * @transfer_buffer: pointer to the transfer buffer
902 * @buffer_length: length of the transfer buffer
903 * @complete: pointer to the usb_complete_t function
904 * @context: what to set the urb context to.
905 * @interval: what to set the urb interval to, encoded like
906 * the endpoint descriptor's bInterval value.
907 *
908 * Initializes a interrupt urb with the proper information needed to submit
909 * it to a device.
910 * Note that high speed interrupt endpoints use a logarithmic encoding of
911 * the endpoint interval, and express polling intervals in microframes
912 * (eight per millisecond) rather than in frames (one per millisecond).
913 */
914static inline void usb_fill_int_urb (struct urb *urb,
915 struct usb_device *dev,
916 unsigned int pipe,
917 void *transfer_buffer,
918 int buffer_length,
919 usb_complete_t complete,
920 void *context,
921 int interval)
922{
923 spin_lock_init(&urb->lock);
924 urb->dev = dev;
925 urb->pipe = pipe;
926 urb->transfer_buffer = transfer_buffer;
927 urb->transfer_buffer_length = buffer_length;
928 urb->complete = complete;
929 urb->context = context;
930 if (dev->speed == USB_SPEED_HIGH)
931 urb->interval = 1 << (interval - 1);
932 else
933 urb->interval = interval;
934 urb->start_frame = -1;
935}
936
937extern void usb_init_urb(struct urb *urb);
938extern struct urb *usb_alloc_urb(int iso_packets, int mem_flags);
939extern void usb_free_urb(struct urb *urb);
940#define usb_put_urb usb_free_urb
941extern struct urb *usb_get_urb(struct urb *urb);
942extern int usb_submit_urb(struct urb *urb, int mem_flags);
943extern int usb_unlink_urb(struct urb *urb);
944extern void usb_kill_urb(struct urb *urb);
945
946#define HAVE_USB_BUFFERS
947void *usb_buffer_alloc (struct usb_device *dev, size_t size,
948 int mem_flags, dma_addr_t *dma);
949void usb_buffer_free (struct usb_device *dev, size_t size,
950 void *addr, dma_addr_t dma);
951
952#if 0
953struct urb *usb_buffer_map (struct urb *urb);
954void usb_buffer_dmasync (struct urb *urb);
955void usb_buffer_unmap (struct urb *urb);
956#endif
957
958struct scatterlist;
959int usb_buffer_map_sg (struct usb_device *dev, unsigned pipe,
960 struct scatterlist *sg, int nents);
961#if 0
962void usb_buffer_dmasync_sg (struct usb_device *dev, unsigned pipe,
963 struct scatterlist *sg, int n_hw_ents);
964#endif
965void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe,
966 struct scatterlist *sg, int n_hw_ents);
967
968/*-------------------------------------------------------------------*
969 * SYNCHRONOUS CALL SUPPORT *
970 *-------------------------------------------------------------------*/
971
972extern int usb_control_msg(struct usb_device *dev, unsigned int pipe,
973 __u8 request, __u8 requesttype, __u16 value, __u16 index,
974 void *data, __u16 size, int timeout);
975extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
976 void *data, int len, int *actual_length,
977 int timeout);
978
979/* selective suspend/resume */
980extern int usb_suspend_device(struct usb_device *dev, u32 state);
981extern int usb_resume_device(struct usb_device *dev);
982
983
984/* wrappers around usb_control_msg() for the most common standard requests */
985extern int usb_get_descriptor(struct usb_device *dev, unsigned char desctype,
986 unsigned char descindex, void *buf, int size);
987extern int usb_get_status(struct usb_device *dev,
988 int type, int target, void *data);
989extern int usb_get_string(struct usb_device *dev,
990 unsigned short langid, unsigned char index, void *buf, int size);
991extern int usb_string(struct usb_device *dev, int index,
992 char *buf, size_t size);
993
994/* wrappers that also update important state inside usbcore */
995extern int usb_clear_halt(struct usb_device *dev, int pipe);
996extern int usb_reset_configuration(struct usb_device *dev);
997extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
998
999/*
1000 * timeouts, in milliseconds, used for sending/receiving control messages
1001 * they typically complete within a few frames (msec) after they're issued
1002 * USB identifies 5 second timeouts, maybe more in a few cases, and a few
1003 * slow devices (like some MGE Ellipse UPSes) actually push that limit.
1004 */
1005#define USB_CTRL_GET_TIMEOUT 5000
1006#define USB_CTRL_SET_TIMEOUT 5000
1007
1008
1009/**
1010 * struct usb_sg_request - support for scatter/gather I/O
1011 * @status: zero indicates success, else negative errno
1012 * @bytes: counts bytes transferred.
1013 *
1014 * These requests are initialized using usb_sg_init(), and then are used
1015 * as request handles passed to usb_sg_wait() or usb_sg_cancel(). Most
1016 * members of the request object aren't for driver access.
1017 *
1018 * The status and bytecount values are valid only after usb_sg_wait()
1019 * returns. If the status is zero, then the bytecount matches the total
1020 * from the request.
1021 *
1022 * After an error completion, drivers may need to clear a halt condition
1023 * on the endpoint.
1024 */
1025struct usb_sg_request {
1026 int status;
1027 size_t bytes;
1028
1029 /*
1030 * members below are private to usbcore,
1031 * and are not provided for driver access!
1032 */
1033 spinlock_t lock;
1034
1035 struct usb_device *dev;
1036 int pipe;
1037 struct scatterlist *sg;
1038 int nents;
1039
1040 int entries;
1041 struct urb **urbs;
1042
1043 int count;
1044 struct completion complete;
1045};
1046
1047int usb_sg_init (
1048 struct usb_sg_request *io,
1049 struct usb_device *dev,
1050 unsigned pipe,
1051 unsigned period,
1052 struct scatterlist *sg,
1053 int nents,
1054 size_t length,
1055 int mem_flags
1056);
1057void usb_sg_cancel (struct usb_sg_request *io);
1058void usb_sg_wait (struct usb_sg_request *io);
1059
1060
1061/* -------------------------------------------------------------------------- */
1062
1063/*
1064 * For various legacy reasons, Linux has a small cookie that's paired with
1065 * a struct usb_device to identify an endpoint queue. Queue characteristics
1066 * are defined by the endpoint's descriptor. This cookie is called a "pipe",
1067 * an unsigned int encoded as:
1068 *
1069 * - direction: bit 7 (0 = Host-to-Device [Out],
1070 * 1 = Device-to-Host [In] ...
1071 * like endpoint bEndpointAddress)
1072 * - device address: bits 8-14 ... bit positions known to uhci-hcd
1073 * - endpoint: bits 15-18 ... bit positions known to uhci-hcd
1074 * - pipe type: bits 30-31 (00 = isochronous, 01 = interrupt,
1075 * 10 = control, 11 = bulk)
1076 *
1077 * Given the device address and endpoint descriptor, pipes are redundant.
1078 */
1079
1080/* NOTE: these are not the standard USB_ENDPOINT_XFER_* values!! */
1081/* (yet ... they're the values used by usbfs) */
1082#define PIPE_ISOCHRONOUS 0
1083#define PIPE_INTERRUPT 1
1084#define PIPE_CONTROL 2
1085#define PIPE_BULK 3
1086
1087#define usb_pipein(pipe) ((pipe) & USB_DIR_IN)
1088#define usb_pipeout(pipe) (!usb_pipein(pipe))
1089
1090#define usb_pipedevice(pipe) (((pipe) >> 8) & 0x7f)
1091#define usb_pipeendpoint(pipe) (((pipe) >> 15) & 0xf)
1092
1093#define usb_pipetype(pipe) (((pipe) >> 30) & 3)
1094#define usb_pipeisoc(pipe) (usb_pipetype((pipe)) == PIPE_ISOCHRONOUS)
1095#define usb_pipeint(pipe) (usb_pipetype((pipe)) == PIPE_INTERRUPT)
1096#define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL)
1097#define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK)
1098
1099/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
1100#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
1101#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
1102#define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | ((bit) << (ep)))
1103
1104
1105static inline unsigned int __create_pipe(struct usb_device *dev, unsigned int endpoint)
1106{
1107 return (dev->devnum << 8) | (endpoint << 15);
1108}
1109
1110/* Create various pipes... */
1111#define usb_sndctrlpipe(dev,endpoint) ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint))
1112#define usb_rcvctrlpipe(dev,endpoint) ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
1113#define usb_sndisocpipe(dev,endpoint) ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint))
1114#define usb_rcvisocpipe(dev,endpoint) ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
1115#define usb_sndbulkpipe(dev,endpoint) ((PIPE_BULK << 30) | __create_pipe(dev,endpoint))
1116#define usb_rcvbulkpipe(dev,endpoint) ((PIPE_BULK << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
1117#define usb_sndintpipe(dev,endpoint) ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint))
1118#define usb_rcvintpipe(dev,endpoint) ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN)
1119
1120/*-------------------------------------------------------------------------*/
1121
1122static inline __u16
1123usb_maxpacket(struct usb_device *udev, int pipe, int is_out)
1124{
1125 struct usb_host_endpoint *ep;
1126 unsigned epnum = usb_pipeendpoint(pipe);
1127
1128 if (is_out) {
1129 WARN_ON(usb_pipein(pipe));
1130 ep = udev->ep_out[epnum];
1131 } else {
1132 WARN_ON(usb_pipeout(pipe));
1133 ep = udev->ep_in[epnum];
1134 }
1135 if (!ep)
1136 return 0;
1137
1138 /* NOTE: only 0x07ff bits are for packet size... */
1139 return le16_to_cpu(ep->desc.wMaxPacketSize);
1140}
1141
1142/* -------------------------------------------------------------------------- */
1143
1144#ifdef DEBUG
1145#define dbg(format, arg...) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg)
1146#else
1147#define dbg(format, arg...) do {} while (0)
1148#endif
1149
1150#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , __FILE__ , ## arg)
1151#define info(format, arg...) printk(KERN_INFO "%s: " format "\n" , __FILE__ , ## arg)
1152#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n" , __FILE__ , ## arg)
1153
1154
1155#endif /* __KERNEL__ */
1156
1157#endif