ssb: Fix extraction of values from SPROM

This fixes extraction of some values from the SPROM.
It mainly fixes extraction of antenna related values, which
is needed for another b43 fix sent later.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

2 files changed, 41 insertions, 16 deletions

diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index a21ab29ff363..0eaa98424f0a 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -22,7 +22,12 @@ struct ssb_sprom {
         u8 et1mac[6];           /* MAC address for 802.11a */
         u8 et0phyaddr;          /* MII address for enet0 */
         u8 et1phyaddr;          /* MII address for enet1 */
+        u8 et0mdcport;          /* MDIO for enet0 */
+        u8 et1mdcport;          /* MDIO for enet1 */
+        u8 board_rev;           /* Board revision number from SPROM. */
         u8 country_code;        /* Country Code */
+        u8 ant_available_a;     /* A-PHY antenna available bits (up to 4) */
+        u8 ant_available_bg;    /* B/G-PHY antenna available bits (up to 4) */
         u16 pa0b0;
         u16 pa0b1;
         u16 pa0b2;
@@ -38,8 +43,18 @@ struct ssb_sprom {
         u8 itssi_a;             /* Idle TSSI Target for A-PHY */
         u8 itssi_bg;            /* Idle TSSI Target for B/G-PHY */
         u16 boardflags_lo;      /* Boardflags (low 16 bits) */
-        u8 antenna_gain_a;      /* A-PHY Antenna gain (in dBm Q5.2) */
-        u8 antenna_gain_bg;     /* B/G-PHY Antenna gain (in dBm Q5.2) */
+
+        /* Antenna gain values for up to 4 antennas
+         * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+         * loss in the connectors is bigger than the gain. */
+        struct {
+                struct {
+                        s8 a0, a1, a2, a3;
+                } ghz24;        /* 2.4GHz band */
+                struct {
+                        s8 a0, a1, a2, a3;
+                } ghz5;         /* 5GHz band */
+        } antenna_gain;
 
         /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
 };
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index 30222e89ad16..ebad0bac9801 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -193,10 +193,10 @@
 #define  SSB_SPROM1_BINF_BREV           0x00FF  /* Board Revision */
 #define  SSB_SPROM1_BINF_CCODE          0x0F00  /* Country Code */
 #define  SSB_SPROM1_BINF_CCODE_SHIFT    8
-#define  SSB_SPROM1_BINF_ANTA           0x3000  /* Available A-PHY antennas */
-#define  SSB_SPROM1_BINF_ANTA_SHIFT     12
-#define  SSB_SPROM1_BINF_ANTBG          0xC000  /* Available B-PHY antennas */
-#define  SSB_SPROM1_BINF_ANTBG_SHIFT    14
+#define  SSB_SPROM1_BINF_ANTBG          0x3000  /* Available B-PHY and G-PHY antennas */
+#define  SSB_SPROM1_BINF_ANTBG_SHIFT    12
+#define  SSB_SPROM1_BINF_ANTA           0xC000  /* Available A-PHY antennas */
+#define  SSB_SPROM1_BINF_ANTA_SHIFT     14
 #define SSB_SPROM1_PA0B0                0x105E
 #define SSB_SPROM1_PA0B1                0x1060
 #define SSB_SPROM1_PA0B2                0x1062
@@ -221,9 +221,10 @@
 #define  SSB_SPROM1_ITSSI_A_SHIFT       8
 #define SSB_SPROM1_BFLLO                0x1072  /* Boardflags (low 16 bits) */
 #define SSB_SPROM1_AGAIN                0x1074  /* Antenna Gain (in dBm Q5.2) */
-#define  SSB_SPROM1_AGAIN_A             0x00FF  /* A-PHY */
-#define  SSB_SPROM1_AGAIN_BG            0xFF00  /* B-PHY and G-PHY */
-#define  SSB_SPROM1_AGAIN_BG_SHIFT      8
+#define  SSB_SPROM1_AGAIN_BG            0x00FF  /* B-PHY and G-PHY */
+#define  SSB_SPROM1_AGAIN_BG_SHIFT      0
+#define  SSB_SPROM1_AGAIN_A             0xFF00  /* A-PHY */
+#define  SSB_SPROM1_AGAIN_A_SHIFT       8
 
 /* SPROM Revision 2 (inherits from rev 1) */
 #define SSB_SPROM2_BFLHI                0x1038  /* Boardflags (high 16 bits) */
@@ -264,7 +265,7 @@
 #define  SSB_SPROM3_CCKPO_11M_SHIFT     12
 #define  SSB_SPROM3_OFDMGPO             0x107A  /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
 
-/* SPROM Revision 4             entries with ?? in comment are unknown */
+/* SPROM Revision 4 */
 #define SSB_SPROM4_IL0MAC               0x104C  /* 6 byte MAC address for a/b/g/n */
 #define SSB_SPROM4_ET0MAC               0x1018  /* 6 bytes MAC address for Ethernet ?? */
 #define SSB_SPROM4_ET1MAC               0x1018  /* 6 bytes MAC address for 802.11a ?? */
@@ -275,13 +276,22 @@
 #define  SSB_SPROM4_ETHPHY_ET0M         (1<<14) /* MDIO for enet0 */
 #define  SSB_SPROM4_ETHPHY_ET1M         (1<<15) /* MDIO for enet1 */
 #define SSB_SPROM4_CCODE                0x1052  /* Country Code (2 bytes) */
-#define SSB_SPROM4_ANT_A                0x105D  /* A Antennas */
-#define SSB_SPROM4_ANT_BG               0x105C  /* B/G Antennas */
+#define SSB_SPROM4_ANTAVAIL             0x105D  /* Antenna available bitfields */
+#define SSB_SPROM4_ANTAVAIL_A           0x00FF  /* A-PHY bitfield */
+#define SSB_SPROM4_ANTAVAIL_A_SHIFT     0
+#define SSB_SPROM4_ANTAVAIL_BG          0xFF00  /* B-PHY and G-PHY bitfield */
+#define SSB_SPROM4_ANTAVAIL_BG_SHIFT    8
 #define SSB_SPROM4_BFLLO                0x1044  /* Boardflags (low 16 bits) */
-#define SSB_SPROM4_AGAIN                0x105E  /* Antenna Gain (in dBm Q5.2) */
-#define  SSB_SPROM4_AGAIN_0             0x00FF  /* Antenna 0 */
-#define  SSB_SPROM4_AGAIN_1             0xFF00  /* Antenna 1 */
-#define  SSB_SPROM4_AGAIN_1_SHIFT       8
+#define SSB_SPROM4_AGAIN01              0x105E  /* Antenna Gain (in dBm Q5.2) */
+#define  SSB_SPROM4_AGAIN0              0x00FF  /* Antenna 0 */
+#define  SSB_SPROM4_AGAIN0_SHIFT        0
+#define  SSB_SPROM4_AGAIN1              0xFF00  /* Antenna 1 */
+#define  SSB_SPROM4_AGAIN1_SHIFT        8
+#define SSB_SPROM4_AGAIN23              0x1060
+#define  SSB_SPROM4_AGAIN2              0x00FF  /* Antenna 2 */
+#define  SSB_SPROM4_AGAIN2_SHIFT        0
+#define  SSB_SPROM4_AGAIN3              0xFF00  /* Antenna 3 */
+#define  SSB_SPROM4_AGAIN3_SHIFT        8
 #define SSB_SPROM4_BFLHI                0x1046  /* Board Flags Hi */
 #define SSB_SPROM4_MAXP_BG              0x1080  /* Max Power BG in path 1 */
 #define  SSB_SPROM4_MAXP_BG_MASK        0x00FF  /* Mask for Max Power BG */