Merge commit 'v2.6.30-rc5' into core/iommu

Merge reason: core/iommu was on an .30-rc1 base,
              update it to .30-rc5 to refresh.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

3 files changed, 42 insertions, 1 deletions

diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h
new file mode 100644
index 000000000000..4231104c9afa
--- /dev/null
+++ b/include/linux/spi/ad7879.h
@@ -0,0 +1,35 @@
+/* linux/spi/ad7879.h */
+
+/* Touchscreen characteristics vary between boards and models.  The
+ * platform_data for the device's "struct device" holds this information.
+ *
+ * It's OK if the min/max values are zero.
+ */
+struct ad7879_platform_data {
+        u16     model;                  /* 7879 */
+        u16     x_plate_ohms;
+        u16     x_min, x_max;
+        u16     y_min, y_max;
+        u16     pressure_min, pressure_max;
+
+        /* [0..255] 0=OFF Starts at 1=550us and goes
+         * all the way to 9.440ms in steps of 35us.
+         */
+        u8      pen_down_acc_interval;
+        /* [0..15] Starts at 0=128us and goes all the
+         * way to 4.096ms in steps of 128us.
+         */
+        u8      first_conversion_delay;
+        /* [0..3] 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */
+        u8      acquisition_time;
+        /* [0..3] Average X middle samples 0 = 2, 1 = 4, 2 = 8, 3 = 16 */
+        u8      averaging;
+        /* [0..3] Perform X measurements 0 = OFF,
+         * 1 = 4, 2 = 8, 3 = 16 (median > averaging)
+         */
+        u8      median;
+        /* 1 = AUX/VBAT/GPIO set to GPIO Output */
+        u8      gpio_output;
+        /* Initial GPIO pin state (valid if gpio_output = 1) */
+        u8      gpio_default;
+};
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index 05eab2f11e63..2ea20320c093 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -51,5 +51,6 @@ struct ads7846_platform_data {
                                  void **filter_data);
         int     (*filter)       (void *filter_data, int data_idx, int *val);
         void    (*filter_cleanup)(void *filter_data);
+        void    (*wait_for_sync)(void);
 };
 
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 2cc43fa380cb..a0faa18f7b1b 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -245,7 +245,12 @@ struct spi_master {
          */
         u16                     dma_alignment;
 
-        /* setup mode and clock, etc (spi driver may call many times) */
+        /* Setup mode and clock, etc (spi driver may call many times).
+         *
+         * IMPORTANT:  this may be called when transfers to another
+         * device are active.  DO NOT UPDATE SHARED REGISTERS in ways
+         * which could break those transfers.
+         */
         int                     (*setup)(struct spi_device *spi);
 
         /* bidirectional bulk transfers