pinctrl/nomadik: merge old pincfg header

This merges the old <plat/pincfg.h> header into
<linux/platform_data/pinctrl-nomadik.h> and rids us of
yet one more <plat/*> include.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 158 insertions, 0 deletions

diff --git a/include/linux/platform_data/pinctrl-nomadik.h b/include/linux/platform_data/pinctrl-nomadik.h
index a74999438de4..f73b2f0c55b7 100644
--- a/include/linux/platform_data/pinctrl-nomadik.h
+++ b/include/linux/platform_data/pinctrl-nomadik.h
@@ -14,6 +14,160 @@
 #define __PLAT_NOMADIK_GPIO
 
 /*
+ * pin configurations are represented by 32-bit integers:
+ *
+ *      bit  0.. 8 - Pin Number (512 Pins Maximum)
+ *      bit  9..10 - Alternate Function Selection
+ *      bit 11..12 - Pull up/down state
+ *      bit     13 - Sleep mode behaviour
+ *      bit     14 - Direction
+ *      bit     15 - Value (if output)
+ *      bit 16..18 - SLPM pull up/down state
+ *      bit 19..20 - SLPM direction
+ *      bit 21..22 - SLPM Value (if output)
+ *      bit 23..25 - PDIS value (if input)
+ *      bit     26 - Gpio mode
+ *      bit     27 - Sleep mode
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * PIN_CFG_DEFAULT - default config (0):
+ *                   pull up/down = disabled
+ *                   sleep mode = input/wakeup
+ *                   direction = input
+ *                   value = low
+ *                   SLPM direction = same as normal
+ *                   SLPM pull = same as normal
+ *                   SLPM value = same as normal
+ *
+ * PIN_CFG         - default config with alternate function
+ */
+
+typedef unsigned long pin_cfg_t;
+
+#define PIN_NUM_MASK            0x1ff
+#define PIN_NUM(x)              ((x) & PIN_NUM_MASK)
+
+#define PIN_ALT_SHIFT           9
+#define PIN_ALT_MASK            (0x3 << PIN_ALT_SHIFT)
+#define PIN_ALT(x)              (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
+#define PIN_GPIO                (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
+#define PIN_ALT_A               (NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
+#define PIN_ALT_B               (NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
+#define PIN_ALT_C               (NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
+
+#define PIN_PULL_SHIFT          11
+#define PIN_PULL_MASK           (0x3 << PIN_PULL_SHIFT)
+#define PIN_PULL(x)             (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
+#define PIN_PULL_NONE           (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
+#define PIN_PULL_UP             (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
+#define PIN_PULL_DOWN           (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
+
+#define PIN_SLPM_SHIFT          13
+#define PIN_SLPM_MASK           (0x1 << PIN_SLPM_SHIFT)
+#define PIN_SLPM(x)             (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
+#define PIN_SLPM_MAKE_INPUT     (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
+#define PIN_SLPM_NOCHANGE       (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
+/* These two replace the above in DB8500v2+ */
+#define PIN_SLPM_WAKEUP_ENABLE  (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
+#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
+#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE
+
+#define PIN_SLPM_GPIO  PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */
+#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */
+
+#define PIN_DIR_SHIFT           14
+#define PIN_DIR_MASK            (0x1 << PIN_DIR_SHIFT)
+#define PIN_DIR(x)              (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
+#define PIN_DIR_INPUT           (0 << PIN_DIR_SHIFT)
+#define PIN_DIR_OUTPUT          (1 << PIN_DIR_SHIFT)
+
+#define PIN_VAL_SHIFT           15
+#define PIN_VAL_MASK            (0x1 << PIN_VAL_SHIFT)
+#define PIN_VAL(x)              (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
+#define PIN_VAL_LOW             (0 << PIN_VAL_SHIFT)
+#define PIN_VAL_HIGH            (1 << PIN_VAL_SHIFT)
+
+#define PIN_SLPM_PULL_SHIFT     16
+#define PIN_SLPM_PULL_MASK      (0x7 << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL(x)        \
+        (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_NONE      \
+        ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_UP        \
+        ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_DOWN      \
+        ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
+
+#define PIN_SLPM_DIR_SHIFT      19
+#define PIN_SLPM_DIR_MASK       (0x3 << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR(x)         \
+        (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_INPUT      ((1 + 0) << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_OUTPUT     ((1 + 1) << PIN_SLPM_DIR_SHIFT)
+
+#define PIN_SLPM_VAL_SHIFT      21
+#define PIN_SLPM_VAL_MASK       (0x3 << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL(x)         \
+        (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_LOW        ((1 + 0) << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_HIGH       ((1 + 1) << PIN_SLPM_VAL_SHIFT)
+
+#define PIN_SLPM_PDIS_SHIFT             23
+#define PIN_SLPM_PDIS_MASK              (0x3 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS(x)        \
+        (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_NO_CHANGE         (0 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_DISABLED          (1 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_ENABLED           (2 << PIN_SLPM_PDIS_SHIFT)
+
+#define PIN_LOWEMI_SHIFT        25
+#define PIN_LOWEMI_MASK         (0x1 << PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI(x)           (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI_DISABLED     (0 << PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI_ENABLED      (1 << PIN_LOWEMI_SHIFT)
+
+#define PIN_GPIOMODE_SHIFT      26
+#define PIN_GPIOMODE_MASK       (0x1 << PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE(x)         (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE_DISABLED   (0 << PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE_ENABLED    (1 << PIN_GPIOMODE_SHIFT)
+
+#define PIN_SLEEPMODE_SHIFT     27
+#define PIN_SLEEPMODE_MASK      (0x1 << PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE(x)        (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE_DISABLED  (0 << PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE_ENABLED   (1 << PIN_SLEEPMODE_SHIFT)
+
+
+/* Shortcuts.  Use these instead of separate DIR, PULL, and VAL.  */
+#define PIN_INPUT_PULLDOWN      (PIN_DIR_INPUT | PIN_PULL_DOWN)
+#define PIN_INPUT_PULLUP        (PIN_DIR_INPUT | PIN_PULL_UP)
+#define PIN_INPUT_NOPULL        (PIN_DIR_INPUT | PIN_PULL_NONE)
+#define PIN_OUTPUT_LOW          (PIN_DIR_OUTPUT | PIN_VAL_LOW)
+#define PIN_OUTPUT_HIGH         (PIN_DIR_OUTPUT | PIN_VAL_HIGH)
+
+#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
+#define PIN_SLPM_INPUT_PULLUP   (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
+#define PIN_SLPM_INPUT_NOPULL   (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
+#define PIN_SLPM_OUTPUT_LOW     (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
+#define PIN_SLPM_OUTPUT_HIGH    (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
+
+#define PIN_CFG_DEFAULT         (0)
+
+#define PIN_CFG(num, alt)               \
+        (PIN_CFG_DEFAULT |\
+         (PIN_NUM(num) | PIN_##alt))
+
+#define PIN_CFG_INPUT(num, alt, pull)           \
+        (PIN_CFG_DEFAULT |\
+         (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
+
+#define PIN_CFG_OUTPUT(num, alt, val)           \
+        (PIN_CFG_DEFAULT |\
+         (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
+
+/*
  * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
  * the "gpio" namespace for generic and cross-machine functions
  */
@@ -72,6 +226,10 @@ enum nmk_gpio_slpm {
         NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
 };
 
+/* Older deprecated pin config API that should go away soon */
+extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
+extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
+extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);
 extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
 extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
 #ifdef CONFIG_PINCTRL_NOMADIK