Merge commit 'v2.6.31-rc4' into next

1 files changed, 23 insertions, 49 deletions

diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index ad2580596033..f4784c0fe975 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -47,6 +47,7 @@ struct i2c_driver;
 union i2c_smbus_data;
 struct i2c_board_info;
 
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 /*
  * The master routines are the ones normally used to transmit data to devices
  * on a bus (or read from them). Apart from two basic transfer functions to
@@ -93,6 +94,7 @@ extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client,
 extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client,
                                           u8 command, u8 length,
                                           const u8 *values);
+#endif /* I2C */
 
 /**
  * struct i2c_driver - represent an I2C device driver
@@ -100,9 +102,8 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client,
  * @class: What kind of i2c device we instantiate (for detect)
  * @attach_adapter: Callback for bus addition (for legacy drivers)
  * @detach_adapter: Callback for bus removal (for legacy drivers)
- * @detach_client: Callback for device removal (for legacy drivers)
- * @probe: Callback for device binding (new-style drivers)
- * @remove: Callback for device unbinding (new-style drivers)
+ * @probe: Callback for device binding
+ * @remove: Callback for device unbinding
  * @shutdown: Callback for device shutdown
  * @suspend: Callback for device suspend
  * @resume: Callback for device resume
@@ -137,26 +138,14 @@ struct i2c_driver {
         int id;
         unsigned int class;
 
-        /* Notifies the driver that a new bus has appeared. This routine
-         * can be used by the driver to test if the bus meets its conditions
-         * & seek for the presence of the chip(s) it supports. If found, it
-         * registers the client(s) that are on the bus to the i2c admin. via
-         * i2c_attach_client.  (LEGACY I2C DRIVERS ONLY)
+        /* Notifies the driver that a new bus has appeared or is about to be
+         * removed. You should avoid using this if you can, it will probably
+         * be removed in a near future.
          */
         int (*attach_adapter)(struct i2c_adapter *);
         int (*detach_adapter)(struct i2c_adapter *);
 
-        /* tells the driver that a client is about to be deleted & gives it
-         * the chance to remove its private data. Also, if the client struct
-         * has been dynamically allocated by the driver in the function above,
-         * it must be freed here.  (LEGACY I2C DRIVERS ONLY)
-         */
-        int (*detach_client)(struct i2c_client *) __deprecated;
-
-        /* Standard driver model interfaces, for "new style" i2c drivers.
-         * With the driver model, device enumeration is NEVER done by drivers;
-         * it's done by infrastructure.  (NEW STYLE DRIVERS ONLY)
-         */
+        /* Standard driver model interfaces */
         int (*probe)(struct i2c_client *, const struct i2c_device_id *);
         int (*remove)(struct i2c_client *);
 
@@ -191,9 +180,8 @@ struct i2c_driver {
  * @driver: device's driver, hence pointer to access routines
  * @dev: Driver model device node for the slave.
  * @irq: indicates the IRQ generated by this device (if any)
- * @list: list of active/busy clients (DEPRECATED)
- * @detected: member of an i2c_driver.clients list
- * @released: used to synchronize client releases & detaches and references
+ * @detected: member of an i2c_driver.clients list or i2c-core's
+ *      userspace_devices list
  *
  * An i2c_client identifies a single device (i.e. chip) connected to an
  * i2c bus. The behaviour exposed to Linux is defined by the driver
@@ -209,9 +197,7 @@ struct i2c_client {
         struct i2c_driver *driver;      /* and our access routines      */
         struct device dev;              /* the device structure         */
         int irq;                        /* irq issued by device         */
-        struct list_head list;          /* DEPRECATED */
         struct list_head detected;
-        struct completion released;
 };
 #define to_i2c_client(d) container_of(d, struct i2c_client, dev)
 
@@ -248,11 +234,10 @@ static inline void i2c_set_clientdata(struct i2c_client *dev, void *data)
  * that, such as chip type, configuration, associated IRQ, and so on.
  *
  * i2c_board_info is used to build tables of information listing I2C devices
- * that are present.  This information is used to grow the driver model tree
- * for "new style" I2C drivers.  For mainboards this is done statically using
- * i2c_register_board_info(); bus numbers identify adapters that aren't
- * yet available.  For add-on boards, i2c_new_device() does this dynamically
- * with the adapter already known.
+ * that are present.  This information is used to grow the driver model tree.
+ * For mainboards this is done statically using i2c_register_board_info();
+ * bus numbers identify adapters that aren't yet available.  For add-on boards,
+ * i2c_new_device() does this dynamically with the adapter already known.
  */
 struct i2c_board_info {
         char            type[I2C_NAME_SIZE];
@@ -277,6 +262,7 @@ struct i2c_board_info {
         .type = dev_type, .addr = (dev_addr)
 
 
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 /* Add-on boards should register/unregister their devices; e.g. a board
  * with integrated I2C, a config eeprom, sensors, and a codec that's
  * used in conjunction with the primary hardware.
@@ -300,6 +286,7 @@ extern struct i2c_client *
 i2c_new_dummy(struct i2c_adapter *adap, u16 address);
 
 extern void i2c_unregister_device(struct i2c_client *);
+#endif /* I2C */
 
 /* Mainboard arch_initcall() code should register all its I2C devices.
  * This is done at arch_initcall time, before declaring any i2c adapters.
@@ -316,7 +303,7 @@ i2c_register_board_info(int busnum, struct i2c_board_info const *info,
 {
         return 0;
 }
-#endif
+#endif /* I2C_BOARDINFO */
 
 /*
  * The following structs are for those who like to implement new bus drivers:
@@ -352,21 +339,15 @@ struct i2c_adapter {
         const struct i2c_algorithm *algo; /* the algorithm to access the bus */
         void *algo_data;
 
-        /* --- administration stuff. */
-        int (*client_register)(struct i2c_client *) __deprecated;
-        int (*client_unregister)(struct i2c_client *) __deprecated;
-
         /* data fields that are valid for all devices   */
         u8 level;                       /* nesting level for lockdep */
         struct mutex bus_lock;
-        struct mutex clist_lock;
 
         int timeout;                    /* in jiffies */
         int retries;
         struct device dev;              /* the adapter device */
 
         int nr;
-        struct list_head clients;       /* DEPRECATED */
         char name[48];
         struct completion dev_released;
 };
@@ -412,11 +393,16 @@ struct i2c_client_address_data {
 /* The numbers to use to set I2C bus address */
 #define ANY_I2C_BUS             0xffff
 
+/* Construct an I2C_CLIENT_END-terminated array of i2c addresses */
+#define I2C_ADDRS(addr, addrs...) \
+        ((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END })
+
 
 /* ----- functions exported by i2c.o */
 
 /* administration...
  */
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 extern int i2c_add_adapter(struct i2c_adapter *);
 extern int i2c_del_adapter(struct i2c_adapter *);
 extern int i2c_add_numbered_adapter(struct i2c_adapter *);
@@ -429,11 +415,6 @@ static inline int i2c_add_driver(struct i2c_driver *driver)
         return i2c_register_driver(THIS_MODULE, driver);
 }
 
-/* These are deprecated, your driver should use the standard .probe()
- * and .remove() methods instead. */
-extern int __deprecated i2c_attach_client(struct i2c_client *);
-extern int __deprecated i2c_detach_client(struct i2c_client *);
-
 extern struct i2c_client *i2c_use_client(struct i2c_client *client);
 extern void i2c_release_client(struct i2c_client *client);
 
@@ -442,14 +423,6 @@ extern void i2c_release_client(struct i2c_client *client);
 extern void i2c_clients_command(struct i2c_adapter *adap,
                                 unsigned int cmd, void *arg);
 
-/* Detect function. It iterates over all possible addresses itself.
- * It will only call found_proc if some client is connected at the
- * specific address (unless a 'force' matched);
- */
-extern int i2c_probe(struct i2c_adapter *adapter,
-                const struct i2c_client_address_data *address_data,
-                int (*found_proc) (struct i2c_adapter *, int, int));
-
 extern struct i2c_adapter *i2c_get_adapter(int id);
 extern void i2c_put_adapter(struct i2c_adapter *adap);
 
@@ -471,6 +444,7 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap)
 {
         return adap->nr;
 }
+#endif /* I2C */
 #endif /* __KERNEL__ */
 
 /**