extcon: Fix indentation coding style to improve readability

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>

2 files changed, 29 insertions, 29 deletions

diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h
index 20e9eef25d4c..9ca958c4e94c 100644
--- a/include/linux/extcon/extcon-adc-jack.h
+++ b/include/linux/extcon/extcon-adc-jack.h
@@ -20,10 +20,10 @@
 
 /**
  * struct adc_jack_cond - condition to use an extcon state
- * @state      - the corresponding extcon state (if 0, this struct denotes
- *             the last adc_jack_cond element among the array)
- * @min_adc    - min adc value for this condition
- * @max_adc    - max adc value for this condition
+ * @state:              the corresponding extcon state (if 0, this struct
+ *                      denotes the last adc_jack_cond element among the array)
+ * @min_adc:            min adc value for this condition
+ * @max_adc:            max adc value for this condition
  *
  * For example, if { .state = 0x3, .min_adc = 100, .max_adc = 200}, it means
  * that if ADC value is between (inclusive) 100 and 200, than the cable 0 and
@@ -33,34 +33,34 @@
  * because when no adc_jack_cond is met, state = 0 is automatically chosen.
  */
 struct adc_jack_cond {
-        u32 state; /* extcon state value. 0 if invalid */
+        u32 state;      /* extcon state value. 0 if invalid */
         u32 min_adc;
         u32 max_adc;
 };
 
 /**
  * struct adc_jack_pdata - platform data for adc jack device.
- * @name       - name of the extcon device. If null, "adc-jack" is used.
- * @consumer_channel - Unique name to identify the channel on the consumer
- *                   side. This typically describes the channels used within
- *                   the consumer. E.g. 'battery_voltage'
- * @cable_names        - array of cable names ending with null.
- * @adc_contitions     - array of struct adc_jack_cond conditions ending
- *                     with .state = 0 entry. This describes how to decode
- *                     adc values into extcon state.
- * @irq_flags  - irq flags used for the @irq
- * @handling_delay_ms  - in some devices, we need to read ADC value some
- *                     milli-seconds after the interrupt occurs. You may
- *                     describe such delays with @handling_delay_ms, which
- *                     is rounded-off by jiffies.
+ * @name:               name of the extcon device. If null, "adc-jack" is used.
+ * @consumer_channel:   Unique name to identify the channel on the consumer
+ *                      side. This typically describes the channels used within
+ *                      the consumer. E.g. 'battery_voltage'
+ * @cable_names:        array of cable names ending with null.
+ * @adc_contitions:     array of struct adc_jack_cond conditions ending
+ *                      with .state = 0 entry. This describes how to decode
+ *                      adc values into extcon state.
+ * @irq_flags:          irq flags used for the @irq
+ * @handling_delay_ms:  in some devices, we need to read ADC value some
+ *                      milli-seconds after the interrupt occurs. You may
+ *                      describe such delays with @handling_delay_ms, which
+ *                      is rounded-off by jiffies.
  */
 struct adc_jack_pdata {
         const char *name;
         const char *consumer_channel;
-        /*
-         * The last entry should be NULL
-         */
+
+        /* The last entry should be NULL */
         const char **cable_names;
+
         /* The last entry's state should be 0 */
         struct adc_jack_cond *adc_conditions;
 
diff --git a/include/linux/extcon/extcon-gpio.h b/include/linux/extcon/extcon-gpio.h
index 2d8307f7d67d..4ce1aa7d29bd 100644
--- a/include/linux/extcon/extcon-gpio.h
+++ b/include/linux/extcon/extcon-gpio.h
@@ -25,14 +25,14 @@
 
 /**
  * struct gpio_extcon_platform_data - A simple GPIO-controlled extcon device.
- * @name        The name of this GPIO extcon device.
- * @gpio        Corresponding GPIO.
- * @debounce    Debounce time for GPIO IRQ in ms.
- * @irq_flags   IRQ Flags (e.g., IRQF_TRIGGER_LOW).
- * @state_on    print_state is overriden with state_on if attached. If Null,
- *              default method of extcon class is used.
- * @state_off   print_state is overriden with state_on if detached. If Null,
- *              default method of extcon class is used.
+ * @name:               The name of this GPIO extcon device.
+ * @gpio:               Corresponding GPIO.
+ * @debounce:           Debounce time for GPIO IRQ in ms.
+ * @irq_flags:          IRQ Flags (e.g., IRQF_TRIGGER_LOW).
+ * @state_on:           print_state is overriden with state_on if attached.
+ *                      If NULL, default method of extcon class is used.
+ * @state_off:          print_state is overriden with state_on if detached.
+ *                      If NUll, default method of extcon class is used.
  *
  * Note that in order for state_on or state_off to be valid, both state_on
  * and state_off should be not NULL. If at least one of them is NULL,