Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 292 insertions, 0 deletions

diff --git a/include/linux/cd1400.h b/include/linux/cd1400.h
new file mode 100644
index 000000000000..1dc3ab0523fd
--- /dev/null
+++ b/include/linux/cd1400.h
@@ -0,0 +1,292 @@
+/*****************************************************************************/
+
+/*
+ *      cd1400.h  -- cd1400 UART hardware info.
+ *
+ *      Copyright (C) 1996-1998  Stallion Technologies
+ *      Copyright (C) 1994-1996  Greg Ungerer.
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*****************************************************************************/
+#ifndef _CD1400_H
+#define _CD1400_H
+/*****************************************************************************/
+
+/*
+ *      Define the number of async ports per cd1400 uart chip.
+ */
+#define CD1400_PORTS            4
+
+/*
+ *      Define the cd1400 uarts internal FIFO sizes.
+ */
+#define CD1400_TXFIFOSIZE       12
+#define CD1400_RXFIFOSIZE       12
+
+/*
+ *      Local RX FIFO thresh hold level. Also define the RTS thresh hold
+ *      based on the RX thresh hold.
+ */
+#define FIFO_RXTHRESHOLD        6
+#define FIFO_RTSTHRESHOLD       7
+
+/*****************************************************************************/
+
+/*
+ *      Define the cd1400 register addresses. These are all the valid
+ *      registers with the cd1400. Some are global, some virtual, some
+ *      per port.
+ */
+#define GFRCR           0x40
+#define CAR             0x68
+#define GCR             0x4b
+#define SVRR            0x67
+#define RICR            0x44
+#define TICR            0x45
+#define MICR            0x46
+#define RIR             0x6b
+#define TIR             0x6a
+#define MIR             0x69
+#define PPR             0x7e
+
+#define RIVR            0x43
+#define TIVR            0x42
+#define MIVR            0x41
+#define TDR             0x63
+#define RDSR            0x62
+#define MISR            0x4c
+#define EOSRR           0x60
+
+#define LIVR            0x18
+#define CCR             0x05
+#define SRER            0x06
+#define COR1            0x08
+#define COR2            0x09
+#define COR3            0x0a
+#define COR4            0x1e
+#define COR5            0x1f
+#define CCSR            0x0b
+#define RDCR            0x0e
+#define SCHR1           0x1a
+#define SCHR2           0x1b
+#define SCHR3           0x1c
+#define SCHR4           0x1d
+#define SCRL            0x22
+#define SCRH            0x23
+#define LNC             0x24
+#define MCOR1           0x15
+#define MCOR2           0x16
+#define RTPR            0x21
+#define MSVR1           0x6c
+#define MSVR2           0x6d
+#define PSVR            0x6f
+#define RBPR            0x78
+#define RCOR            0x7c
+#define TBPR            0x72
+#define TCOR            0x76
+
+/*****************************************************************************/
+
+/*
+ *      Define the set of baud rate clock divisors.
+ */
+#define CD1400_CLK0     8
+#define CD1400_CLK1     32
+#define CD1400_CLK2     128
+#define CD1400_CLK3     512
+#define CD1400_CLK4     2048
+
+#define CD1400_NUMCLKS  5
+
+/*****************************************************************************/
+
+/*
+ *      Define the clock pre-scalar value to be a 5 ms clock. This should be
+ *      OK for now. It would probably be better to make it 10 ms, but we
+ *      can't fit that divisor into 8 bits!
+ */
+#define PPR_SCALAR      244
+
+/*****************************************************************************/
+
+/*
+ *      Define values used to set character size options.
+ */
+#define COR1_CHL5       0x00
+#define COR1_CHL6       0x01
+#define COR1_CHL7       0x02
+#define COR1_CHL8       0x03
+
+/*
+ *      Define values used to set the number of stop bits.
+ */
+#define COR1_STOP1      0x00
+#define COR1_STOP15     0x04
+#define COR1_STOP2      0x08
+
+/*
+ *      Define values used to set the parity scheme in use.
+ */
+#define COR1_PARNONE    0x00
+#define COR1_PARFORCE   0x20
+#define COR1_PARENB     0x40
+#define COR1_PARIGNORE  0x10
+
+#define COR1_PARODD     0x80
+#define COR1_PAREVEN    0x00
+
+#define COR2_IXM        0x80
+#define COR2_TXIBE      0x40
+#define COR2_ETC        0x20
+#define COR2_LLM        0x10
+#define COR2_RLM        0x08
+#define COR2_RTSAO      0x04
+#define COR2_CTSAE      0x02
+
+#define COR3_SCDRNG     0x80
+#define COR3_SCD34      0x40
+#define COR3_FCT        0x20
+#define COR3_SCD12      0x10
+
+/*
+ *      Define values used by COR4.
+ */
+#define COR4_BRKINT     0x08
+#define COR4_IGNBRK     0x18
+
+/*****************************************************************************/
+
+/*
+ *      Define the modem control register values.
+ *      Note that the actual hardware is a little different to the conventional
+ *      pin names on the cd1400.
+ */
+#define MSVR1_DTR       0x01
+#define MSVR1_DSR       0x10
+#define MSVR1_RI        0x20
+#define MSVR1_CTS       0x40
+#define MSVR1_DCD       0x80
+
+#define MSVR2_RTS       0x02
+#define MSVR2_DSR       0x10
+#define MSVR2_RI        0x20
+#define MSVR2_CTS       0x40
+#define MSVR2_DCD       0x80
+
+#define MCOR1_DCD       0x80
+#define MCOR1_CTS       0x40
+#define MCOR1_RI        0x20
+#define MCOR1_DSR       0x10
+
+#define MCOR2_DCD       0x80
+#define MCOR2_CTS       0x40
+#define MCOR2_RI        0x20
+#define MCOR2_DSR       0x10
+
+/*****************************************************************************/
+
+/*
+ *      Define the bits used with the service (interrupt) enable register.
+ */
+#define SRER_NNDT       0x01
+#define SRER_TXEMPTY    0x02
+#define SRER_TXDATA     0x04
+#define SRER_RXDATA     0x10
+#define SRER_MODEM      0x80
+
+/*****************************************************************************/
+
+/*
+ *      Define operational commands for the command register.
+ */
+#define CCR_RESET       0x80
+#define CCR_CORCHANGE   0x4e
+#define CCR_SENDCH      0x20
+#define CCR_CHANCTRL    0x10
+
+#define CCR_TXENABLE    (CCR_CHANCTRL | 0x08)
+#define CCR_TXDISABLE   (CCR_CHANCTRL | 0x04)
+#define CCR_RXENABLE    (CCR_CHANCTRL | 0x02)
+#define CCR_RXDISABLE   (CCR_CHANCTRL | 0x01)
+
+#define CCR_SENDSCHR1   (CCR_SENDCH | 0x01)
+#define CCR_SENDSCHR2   (CCR_SENDCH | 0x02)
+#define CCR_SENDSCHR3   (CCR_SENDCH | 0x03)
+#define CCR_SENDSCHR4   (CCR_SENDCH | 0x04)
+
+#define CCR_RESETCHAN   (CCR_RESET | 0x00)
+#define CCR_RESETFULL   (CCR_RESET | 0x01)
+#define CCR_TXFLUSHFIFO (CCR_RESET | 0x02)
+
+#define CCR_MAXWAIT     10000
+
+/*****************************************************************************/
+
+/*
+ *      Define the valid acknowledgement types (for hw ack cycle).
+ */
+#define ACK_TYPMASK     0x07
+#define ACK_TYPTX       0x02
+#define ACK_TYPMDM      0x01
+#define ACK_TYPRXGOOD   0x03
+#define ACK_TYPRXBAD    0x07
+
+#define SVRR_RX         0x01
+#define SVRR_TX         0x02
+#define SVRR_MDM        0x04
+
+#define ST_OVERRUN      0x01
+#define ST_FRAMING      0x02
+#define ST_PARITY       0x04
+#define ST_BREAK        0x08
+#define ST_SCHAR1       0x10
+#define ST_SCHAR2       0x20
+#define ST_SCHAR3       0x30
+#define ST_SCHAR4       0x40
+#define ST_RANGE        0x70
+#define ST_SCHARMASK    0x70
+#define ST_TIMEOUT      0x80
+
+#define MISR_DCD        0x80
+#define MISR_CTS        0x40
+#define MISR_RI         0x20
+#define MISR_DSR        0x10
+
+/*****************************************************************************/
+
+/*
+ *      Defines for the CCSR status register.
+ */
+#define CCSR_RXENABLED  0x80
+#define CCSR_RXFLOWON   0x40
+#define CCSR_RXFLOWOFF  0x20
+#define CCSR_TXENABLED  0x08
+#define CCSR_TXFLOWON   0x04
+#define CCSR_TXFLOWOFF  0x02
+
+/*****************************************************************************/
+
+/*
+ *      Define the embedded commands.
+ */
+#define ETC_CMD         0x00
+#define ETC_STARTBREAK  0x81
+#define ETC_DELAY       0x82
+#define ETC_STOPBREAK   0x83
+
+/*****************************************************************************/
+#endif