/spare/repo/libata-dev branch 'v2.6.13'

1 files changed, 408 insertions, 0 deletions

diff --git a/include/asm-xtensa/xtensa/xt2000.h b/include/asm-xtensa/xtensa/xt2000.h
new file mode 100644
index 000000000000..703a45002f8f
--- /dev/null
+++ b/include/asm-xtensa/xtensa/xt2000.h
@@ -0,0 +1,408 @@
+#ifndef _INC_XT2000_H_
+#define _INC_XT2000_H_
+
+/*
+ * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND
+ *
+ * include/asm-xtensa/xtensa/xt2000.h - Definitions specific to the
+ * Tensilica XT2000 Emulation Board
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002 Tensilica Inc.
+ */
+
+
+#include <xtensa/config/core.h>
+#include <xtensa/config/system.h>
+
+
+/*
+ *  Default assignment of XT2000 devices to external interrupts.
+ */
+
+/*  Ethernet interrupt:  */
+#ifdef XCHAL_EXTINT3_NUM
+#define SONIC83934_INTNUM       XCHAL_EXTINT3_NUM
+#define SONIC83934_INTLEVEL     XCHAL_EXTINT3_LEVEL
+#define SONIC83934_INTMASK      XCHAL_EXTINT3_MASK
+#else
+#define SONIC83934_INTMASK      0
+#endif
+
+/*  DUART channel 1 interrupt (P1 - console):  */
+#ifdef XCHAL_EXTINT4_NUM
+#define DUART16552_1_INTNUM     XCHAL_EXTINT4_NUM
+#define DUART16552_1_INTLEVEL   XCHAL_EXTINT4_LEVEL
+#define DUART16552_1_INTMASK    XCHAL_EXTINT4_MASK
+#else
+#define DUART16552_1_INTMASK    0
+#endif
+
+/*  DUART channel 2 interrupt (P2 - 2nd serial port):  */
+#ifdef XCHAL_EXTINT5_NUM
+#define DUART16552_2_INTNUM     XCHAL_EXTINT5_NUM
+#define DUART16552_2_INTLEVEL   XCHAL_EXTINT5_LEVEL
+#define DUART16552_2_INTMASK    XCHAL_EXTINT5_MASK
+#else
+#define DUART16552_2_INTMASK    0
+#endif
+
+/*  FPGA-combined PCI/etc interrupts:  */
+#ifdef XCHAL_EXTINT6_NUM
+#define XT2000_FPGAPCI_INTNUM   XCHAL_EXTINT6_NUM
+#define XT2000_FPGAPCI_INTLEVEL XCHAL_EXTINT6_LEVEL
+#define XT2000_FPGAPCI_INTMASK  XCHAL_EXTINT6_MASK
+#else
+#define XT2000_FPGAPCI_INTMASK  0
+#endif
+
+
+
+/*
+ *  Device addresses.
+ *
+ *  Note:  for endianness-independence, use 32-bit loads and stores for all
+ *  register accesses to Ethernet, DUART and LED devices.  Undefined bits
+ *  may need to be masked out if needed when reading if the actual register
+ *  size is smaller than 32 bits.
+ *
+ *  Note:  XT2000 bus byte lanes are defined in terms of msbyte and lsbyte
+ *  relative to the processor.  So 32-bit registers are accessed consistently
+ *  from both big and little endian processors.  However, this means byte
+ *  sequences are not consistent between big and little endian processors.
+ *  This is fine for RAM, and for ROM if ROM is created for a specific
+ *  processor (and thus has correct byte sequences).  However this may be
+ *  unexpected for Flash, which might contain a file-system that one wants
+ *  to use for multiple processor configurations (eg. the Flash might contain
+ *  the Ethernet card's address, endianness-independent application data, etc).
+ *  That is, byte sequences written in Flash by a core of a given endianness
+ *  will be byte-swapped when seen by a core of the other endianness.
+ *  Someone implementing an endianness-independent Flash file system will
+ *  likely handle this byte-swapping issue in the Flash driver software.
+ */
+
+#define DUART16552_XTAL_FREQ    18432000        /* crystal frequency in Hz */
+#define XTBOARD_FLASH_MAXSIZE   0x4000000       /* 64 MB (max; depends on what is socketed!) */
+#define XTBOARD_EPROM_MAXSIZE   0x0400000       /* 4 MB (max; depends on what is socketed!) */
+#define XTBOARD_EEPROM_MAXSIZE  0x0080000       /* 512 kB (max; depends on what is socketed!) */
+#define XTBOARD_ASRAM_SIZE      0x0100000       /* 1 MB */
+#define XTBOARD_PCI_MEM_SIZE    0x8000000       /* 128 MB (allocated) */
+#define XTBOARD_PCI_IO_SIZE     0x1000000       /* 16 MB (allocated) */
+
+#ifdef XSHAL_IOBLOCK_BYPASS_PADDR
+/*  PCI memory space:  */
+# define XTBOARD_PCI_MEM_PADDR  (XSHAL_IOBLOCK_BYPASS_PADDR+0x0000000)
+/*  Socketed Flash (eg. 2 x 16-bit devices):  */
+# define XTBOARD_FLASH_PADDR    (XSHAL_IOBLOCK_BYPASS_PADDR+0x8000000)
+/*  PCI I/O space:  */
+# define XTBOARD_PCI_IO_PADDR   (XSHAL_IOBLOCK_BYPASS_PADDR+0xC000000)
+/*  V3 PCI interface chip register/config space:  */
+# define XTBOARD_V3PCI_PADDR    (XSHAL_IOBLOCK_BYPASS_PADDR+0xD000000)
+/*  Bus Interface registers:  */
+# define XTBOARD_BUSINT_PADDR   (XSHAL_IOBLOCK_BYPASS_PADDR+0xD010000)
+/*  FPGA registers:  */
+# define XT2000_FPGAREGS_PADDR  (XSHAL_IOBLOCK_BYPASS_PADDR+0xD020000)
+/*  SONIC SN83934 Ethernet controller/transceiver:  */
+# define SONIC83934_PADDR       (XSHAL_IOBLOCK_BYPASS_PADDR+0xD030000)
+/*  8-character bitmapped LED display:  */
+# define XTBOARD_LED_PADDR      (XSHAL_IOBLOCK_BYPASS_PADDR+0xD040000)
+/*  National-Semi PC16552D DUART:  */
+# define DUART16552_1_PADDR     (XSHAL_IOBLOCK_BYPASS_PADDR+0xD050020)  /* channel 1 (P1 - console) */
+# define DUART16552_2_PADDR     (XSHAL_IOBLOCK_BYPASS_PADDR+0xD050000)  /* channel 2 (P2) */
+/*  Asynchronous Static RAM:  */
+# define XTBOARD_ASRAM_PADDR    (XSHAL_IOBLOCK_BYPASS_PADDR+0xD400000)
+/*  8-bit EEPROM:  */
+# define XTBOARD_EEPROM_PADDR   (XSHAL_IOBLOCK_BYPASS_PADDR+0xD600000)
+/*  2 x 16-bit EPROMs:  */
+# define XTBOARD_EPROM_PADDR    (XSHAL_IOBLOCK_BYPASS_PADDR+0xD800000)
+#endif /* XSHAL_IOBLOCK_BYPASS_PADDR */
+
+/*  These devices might be accessed cached:  */
+#ifdef XSHAL_IOBLOCK_CACHED_PADDR
+# define XTBOARD_PCI_MEM_CACHED_PADDR   (XSHAL_IOBLOCK_CACHED_PADDR+0x0000000)
+# define XTBOARD_FLASH_CACHED_PADDR     (XSHAL_IOBLOCK_CACHED_PADDR+0x8000000)
+# define XTBOARD_ASRAM_CACHED_PADDR     (XSHAL_IOBLOCK_CACHED_PADDR+0xD400000)
+# define XTBOARD_EEPROM_CACHED_PADDR    (XSHAL_IOBLOCK_CACHED_PADDR+0xD600000)
+# define XTBOARD_EPROM_CACHED_PADDR     (XSHAL_IOBLOCK_CACHED_PADDR+0xD800000)
+#endif /* XSHAL_IOBLOCK_CACHED_PADDR */
+
+
+/***  Same thing over again, this time with virtual addresses:  ***/
+
+#ifdef XSHAL_IOBLOCK_BYPASS_VADDR
+/*  PCI memory space:  */
+# define XTBOARD_PCI_MEM_VADDR  (XSHAL_IOBLOCK_BYPASS_VADDR+0x0000000)
+/*  Socketed Flash (eg. 2 x 16-bit devices):  */
+# define XTBOARD_FLASH_VADDR    (XSHAL_IOBLOCK_BYPASS_VADDR+0x8000000)
+/*  PCI I/O space:  */
+# define XTBOARD_PCI_IO_VADDR   (XSHAL_IOBLOCK_BYPASS_VADDR+0xC000000)
+/*  V3 PCI interface chip register/config space:  */
+# define XTBOARD_V3PCI_VADDR    (XSHAL_IOBLOCK_BYPASS_VADDR+0xD000000)
+/*  Bus Interface registers:  */
+# define XTBOARD_BUSINT_VADDR   (XSHAL_IOBLOCK_BYPASS_VADDR+0xD010000)
+/*  FPGA registers:  */
+# define XT2000_FPGAREGS_VADDR  (XSHAL_IOBLOCK_BYPASS_VADDR+0xD020000)
+/*  SONIC SN83934 Ethernet controller/transceiver:  */
+# define SONIC83934_VADDR       (XSHAL_IOBLOCK_BYPASS_VADDR+0xD030000)
+/*  8-character bitmapped LED display:  */
+# define XTBOARD_LED_VADDR      (XSHAL_IOBLOCK_BYPASS_VADDR+0xD040000)
+/*  National-Semi PC16552D DUART:  */
+# define DUART16552_1_VADDR     (XSHAL_IOBLOCK_BYPASS_VADDR+0xD050020)  /* channel 1 (P1 - console) */
+# define DUART16552_2_VADDR     (XSHAL_IOBLOCK_BYPASS_VADDR+0xD050000)  /* channel 2 (P2) */
+/*  Asynchronous Static RAM:  */
+# define XTBOARD_ASRAM_VADDR    (XSHAL_IOBLOCK_BYPASS_VADDR+0xD400000)
+/*  8-bit EEPROM:  */
+# define XTBOARD_EEPROM_VADDR   (XSHAL_IOBLOCK_BYPASS_VADDR+0xD600000)
+/*  2 x 16-bit EPROMs:  */
+# define XTBOARD_EPROM_VADDR    (XSHAL_IOBLOCK_BYPASS_VADDR+0xD800000)
+#endif /* XSHAL_IOBLOCK_BYPASS_VADDR */
+
+/*  These devices might be accessed cached:  */
+#ifdef XSHAL_IOBLOCK_CACHED_VADDR
+# define XTBOARD_PCI_MEM_CACHED_VADDR   (XSHAL_IOBLOCK_CACHED_VADDR+0x0000000)
+# define XTBOARD_FLASH_CACHED_VADDR     (XSHAL_IOBLOCK_CACHED_VADDR+0x8000000)
+# define XTBOARD_ASRAM_CACHED_VADDR     (XSHAL_IOBLOCK_CACHED_VADDR+0xD400000)
+# define XTBOARD_EEPROM_CACHED_VADDR    (XSHAL_IOBLOCK_CACHED_VADDR+0xD600000)
+# define XTBOARD_EPROM_CACHED_VADDR     (XSHAL_IOBLOCK_CACHED_VADDR+0xD800000)
+#endif /* XSHAL_IOBLOCK_CACHED_VADDR */
+
+
+/*  System ROM:  */
+#define XTBOARD_ROM_SIZE                XSHAL_ROM_SIZE
+#ifdef XSHAL_ROM_VADDR
+#define XTBOARD_ROM_VADDR               XSHAL_ROM_VADDR
+#endif
+#ifdef XSHAL_ROM_PADDR
+#define XTBOARD_ROM_PADDR               XSHAL_ROM_PADDR
+#endif
+
+/*  System RAM:  */
+#define XTBOARD_RAM_SIZE                XSHAL_RAM_SIZE
+#ifdef XSHAL_RAM_VADDR
+#define XTBOARD_RAM_VADDR               XSHAL_RAM_VADDR
+#endif
+#ifdef XSHAL_RAM_PADDR
+#define XTBOARD_RAM_PADDR               XSHAL_RAM_PADDR
+#endif
+#define XTBOARD_RAM_BYPASS_VADDR        XSHAL_RAM_BYPASS_VADDR
+#define XTBOARD_RAM_BYPASS_PADDR        XSHAL_RAM_BYPASS_PADDR
+
+
+
+/*
+ *  Things that depend on device addresses.
+ */
+
+
+#define XTBOARD_CACHEATTR_WRITEBACK     XSHAL_XT2000_CACHEATTR_WRITEBACK
+#define XTBOARD_CACHEATTR_WRITEALLOC    XSHAL_XT2000_CACHEATTR_WRITEALLOC
+#define XTBOARD_CACHEATTR_WRITETHRU     XSHAL_XT2000_CACHEATTR_WRITETHRU
+#define XTBOARD_CACHEATTR_BYPASS        XSHAL_XT2000_CACHEATTR_BYPASS
+#define XTBOARD_CACHEATTR_DEFAULT       XSHAL_XT2000_CACHEATTR_DEFAULT
+
+#define XTBOARD_BUSINT_PIPE_REGIONS     XSHAL_XT2000_PIPE_REGIONS
+#define XTBOARD_BUSINT_SDRAM_REGIONS    XSHAL_XT2000_SDRAM_REGIONS
+
+
+
+/*
+ *  BusLogic (FPGA) registers.
+ *  All these registers are normally accessed using 32-bit loads/stores.
+ */
+
+/*  Register offsets:  */
+#define XT2000_DATECD_OFS       0x00    /* date code (read-only) */
+#define XT2000_STSREG_OFS       0x04    /* status (read-only) */
+#define XT2000_SYSLED_OFS       0x08    /* system LED */
+#define XT2000_WRPROT_OFS       0x0C    /* write protect */
+#define XT2000_SWRST_OFS        0x10    /* software reset */
+#define XT2000_SYSRST_OFS       0x14    /* system (peripherals) reset */
+#define XT2000_IMASK_OFS        0x18    /* interrupt mask */
+#define XT2000_ISTAT_OFS        0x1C    /* interrupt status */
+#define XT2000_V3CFG_OFS        0x20    /* V3 config (V320 PCI) */
+
+/*  Physical register addresses:  */
+#ifdef XT2000_FPGAREGS_PADDR
+#define XT2000_DATECD_PADDR     (XT2000_FPGAREGS_PADDR+XT2000_DATECD_OFS)
+#define XT2000_STSREG_PADDR     (XT2000_FPGAREGS_PADDR+XT2000_STSREG_OFS)
+#define XT2000_SYSLED_PADDR     (XT2000_FPGAREGS_PADDR+XT2000_SYSLED_OFS)
+#define XT2000_WRPROT_PADDR     (XT2000_FPGAREGS_PADDR+XT2000_WRPROT_OFS)
+#define XT2000_SWRST_PADDR      (XT2000_FPGAREGS_PADDR+XT2000_SWRST_OFS)
+#define XT2000_SYSRST_PADDR     (XT2000_FPGAREGS_PADDR+XT2000_SYSRST_OFS)
+#define XT2000_IMASK_PADDR      (XT2000_FPGAREGS_PADDR+XT2000_IMASK_OFS)
+#define XT2000_ISTAT_PADDR      (XT2000_FPGAREGS_PADDR+XT2000_ISTAT_OFS)
+#define XT2000_V3CFG_PADDR      (XT2000_FPGAREGS_PADDR+XT2000_V3CFG_OFS)
+#endif
+
+/*  Virtual register addresses:  */
+#ifdef XT2000_FPGAREGS_VADDR
+#define XT2000_DATECD_VADDR     (XT2000_FPGAREGS_VADDR+XT2000_DATECD_OFS)
+#define XT2000_STSREG_VADDR     (XT2000_FPGAREGS_VADDR+XT2000_STSREG_OFS)
+#define XT2000_SYSLED_VADDR     (XT2000_FPGAREGS_VADDR+XT2000_SYSLED_OFS)
+#define XT2000_WRPROT_VADDR     (XT2000_FPGAREGS_VADDR+XT2000_WRPROT_OFS)
+#define XT2000_SWRST_VADDR      (XT2000_FPGAREGS_VADDR+XT2000_SWRST_OFS)
+#define XT2000_SYSRST_VADDR     (XT2000_FPGAREGS_VADDR+XT2000_SYSRST_OFS)
+#define XT2000_IMASK_VADDR      (XT2000_FPGAREGS_VADDR+XT2000_IMASK_OFS)
+#define XT2000_ISTAT_VADDR      (XT2000_FPGAREGS_VADDR+XT2000_ISTAT_OFS)
+#define XT2000_V3CFG_VADDR      (XT2000_FPGAREGS_VADDR+XT2000_V3CFG_OFS)
+/*  Register access (for C code):  */
+#define XT2000_DATECD_REG       (*(volatile unsigned*) XT2000_DATECD_VADDR)
+#define XT2000_STSREG_REG       (*(volatile unsigned*) XT2000_STSREG_VADDR)
+#define XT2000_SYSLED_REG       (*(volatile unsigned*) XT2000_SYSLED_VADDR)
+#define XT2000_WRPROT_REG       (*(volatile unsigned*) XT2000_WRPROT_VADDR)
+#define XT2000_SWRST_REG        (*(volatile unsigned*) XT2000_SWRST_VADDR)
+#define XT2000_SYSRST_REG       (*(volatile unsigned*) XT2000_SYSRST_VADDR)
+#define XT2000_IMASK_REG        (*(volatile unsigned*) XT2000_IMASK_VADDR)
+#define XT2000_ISTAT_REG        (*(volatile unsigned*) XT2000_ISTAT_VADDR)
+#define XT2000_V3CFG_REG        (*(volatile unsigned*) XT2000_V3CFG_VADDR)
+#endif
+
+/*  DATECD (date code) bit fields:  */
+
+/*  BCD-coded month (01..12):  */
+#define XT2000_DATECD_MONTH_SHIFT       24
+#define XT2000_DATECD_MONTH_BITS        8
+#define XT2000_DATECD_MONTH_MASK        0xFF000000
+/*  BCD-coded day (01..31):  */
+#define XT2000_DATECD_DAY_SHIFT         16
+#define XT2000_DATECD_DAY_BITS          8
+#define XT2000_DATECD_DAY_MASK          0x00FF0000
+/*  BCD-coded year (2001..9999):  */
+#define XT2000_DATECD_YEAR_SHIFT        0
+#define XT2000_DATECD_YEAR_BITS         16
+#define XT2000_DATECD_YEAR_MASK         0x0000FFFF
+
+/*  STSREG (status) bit fields:  */
+
+/*  Switch SW3 setting bit fields (0=off/up, 1=on/down):  */
+#define XT2000_STSREG_SW3_SHIFT         0
+#define XT2000_STSREG_SW3_BITS          4
+#define XT2000_STSREG_SW3_MASK          0x0000000F
+/*  Boot-select bits of switch SW3:  */
+#define XT2000_STSREG_BOOTSEL_SHIFT     0
+#define XT2000_STSREG_BOOTSEL_BITS      2
+#define XT2000_STSREG_BOOTSEL_MASK      0x00000003
+/*  Boot-select values:  */
+#define XT2000_STSREG_BOOTSEL_FLASH     0
+#define XT2000_STSREG_BOOTSEL_EPROM16   1
+#define XT2000_STSREG_BOOTSEL_PROM8     2
+#define XT2000_STSREG_BOOTSEL_ASRAM     3
+/*  User-defined bits of switch SW3:  */
+#define XT2000_STSREG_SW3_2_SHIFT       2
+#define XT2000_STSREG_SW3_2_MASK        0x00000004
+#define XT2000_STSREG_SW3_3_SHIFT       3
+#define XT2000_STSREG_SW3_3_MASK        0x00000008
+
+/*  SYSLED (system LED) bit fields:  */
+
+/*  LED control bit (0=off, 1=on):  */
+#define XT2000_SYSLED_LEDON_SHIFT       0
+#define XT2000_SYSLED_LEDON_MASK        0x00000001
+
+/*  WRPROT (write protect) bit fields (0=writable, 1=write-protected [default]):  */
+
+/*  Flash write protect:  */
+#define XT2000_WRPROT_FLWP_SHIFT        0
+#define XT2000_WRPROT_FLWP_MASK         0x00000001
+/*  Reserved but present write protect bits:  */
+#define XT2000_WRPROT_WRP_SHIFT         1
+#define XT2000_WRPROT_WRP_BITS          7
+#define XT2000_WRPROT_WRP_MASK          0x000000FE
+
+/*  SWRST (software reset; allows s/w to generate power-on equivalent reset):  */
+
+/*  Software reset bits:  */
+#define XT2000_SWRST_SWR_SHIFT          0
+#define XT2000_SWRST_SWR_BITS           16
+#define XT2000_SWRST_SWR_MASK           0x0000FFFF
+/*  Software reset value -- writing this value resets the board:  */
+#define XT2000_SWRST_RESETVALUE         0x0000DEAD
+
+/*  SYSRST (system reset; controls reset of individual peripherals):  */
+
+/*  All-device reset:  */
+#define XT2000_SYSRST_ALL_SHIFT         0
+#define XT2000_SYSRST_ALL_BITS          4
+#define XT2000_SYSRST_ALL_MASK          0x0000000F
+/*  HDSP-2534 LED display reset (1=reset, 0=nothing):  */
+#define XT2000_SYSRST_LED_SHIFT         0
+#define XT2000_SYSRST_LED_MASK          0x00000001
+/*  Sonic DP83934 Ethernet controller reset (1=reset, 0=nothing):  */
+#define XT2000_SYSRST_SONIC_SHIFT       1
+#define XT2000_SYSRST_SONIC_MASK        0x00000002
+/*  DP16552 DUART reset (1=reset, 0=nothing):  */
+#define XT2000_SYSRST_DUART_SHIFT       2
+#define XT2000_SYSRST_DUART_MASK        0x00000004
+/*  V3 V320 PCI bridge controller reset (1=reset, 0=nothing):  */
+#define XT2000_SYSRST_V3_SHIFT          3
+#define XT2000_SYSRST_V3_MASK           0x00000008
+
+/*  IMASK (interrupt mask; 0=disable, 1=enable):  */
+/*  ISTAT (interrupt status; 0=inactive, 1=pending):  */
+
+/*  PCI INTP interrupt:  */
+#define XT2000_INTMUX_PCI_INTP_SHIFT    2
+#define XT2000_INTMUX_PCI_INTP_MASK     0x00000004
+/*  PCI INTS interrupt:  */
+#define XT2000_INTMUX_PCI_INTS_SHIFT    3
+#define XT2000_INTMUX_PCI_INTS_MASK     0x00000008
+/*  PCI INTD interrupt:  */
+#define XT2000_INTMUX_PCI_INTD_SHIFT    4
+#define XT2000_INTMUX_PCI_INTD_MASK     0x00000010
+/*  V320 PCI controller interrupt:  */
+#define XT2000_INTMUX_V3_SHIFT          5
+#define XT2000_INTMUX_V3_MASK           0x00000020
+/*  PCI ENUM interrupt:  */
+#define XT2000_INTMUX_PCI_ENUM_SHIFT    6
+#define XT2000_INTMUX_PCI_ENUM_MASK     0x00000040
+/*  PCI DEG interrupt:  */
+#define XT2000_INTMUX_PCI_DEG_SHIFT     7
+#define XT2000_INTMUX_PCI_DEG_MASK      0x00000080
+
+/*  V3CFG (V3 config, V320 PCI controller):  */
+
+/*  V3 address control (0=pass-thru, 1=V3 address bits 31:28 set to 4'b0001 [default]):  */
+#define XT2000_V3CFG_V3ADC_SHIFT        0
+#define XT2000_V3CFG_V3ADC_MASK         0x00000001
+
+/* I2C Devices */
+
+#define XT2000_I2C_RTC_ID               0x68
+#define XT2000_I2C_NVRAM0_ID            0x56    /* 1st 256 byte block */
+#define XT2000_I2C_NVRAM1_ID            0x57    /* 2nd 256 byte block */
+
+/*  NVRAM Board Info structure:  */
+
+#define XT2000_NVRAM_SIZE               512
+
+#define XT2000_NVRAM_BINFO_START        0x100
+#define XT2000_NVRAM_BINFO_SIZE         0x20
+#define XT2000_NVRAM_BINFO_VERSION      0x10    /* version 1.0 */
+#if 0
+#define XT2000_NVRAM_BINFO_VERSION_OFFSET       0x00
+#define XT2000_NVRAM_BINFO_VERSION_SIZE                 0x1
+#define XT2000_NVRAM_BINFO_ETH_ADDR_OFFSET      0x02
+#define XT2000_NVRAM_BINFO_ETH_ADDR_SIZE                0x6
+#define XT2000_NVRAM_BINFO_SN_OFFSET            0x10
+#define XT2000_NVRAM_BINFO_SN_SIZE                      0xE
+#define XT2000_NVRAM_BINFO_CRC_OFFSET           0x1E
+#define XT2000_NVRAM_BINFO_CRC_SIZE                     0x2
+#endif /*0*/
+
+#if !defined(__ASSEMBLY__) && !defined(_NOCLANGUAGE)
+typedef struct xt2000_nvram_binfo {
+    unsigned char       version;
+    unsigned char       reserved1;
+    unsigned char       eth_addr[6];
+    unsigned char       reserved8[8];
+    unsigned char       serialno[14];
+    unsigned char       crc[2];         /* 16-bit CRC */
+} xt2000_nvram_binfo;
+#endif /*!__ASSEMBLY__ && !_NOCLANGUAGE*/
+
+
+#endif /*_INC_XT2000_H_*/
+