MIPS: Move headfiles to new location below arch/mips/include

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 179 deletions

diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
deleted file mode 100644
index 5510c53b7feb..000000000000
--- a/include/asm-mips/pci.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef _ASM_PCI_H
-#define _ASM_PCI_H
-
-#include <linux/mm.h>
-
-#ifdef __KERNEL__
-
-/*
- * This file essentially defines the interface between board
- * specific PCI code and MIPS common PCI code.  Should potentially put
- * into include/asm/pci.h file.
- */
-
-#include <linux/ioport.h>
-
-/*
- * Each pci channel is a top-level PCI bus seem by CPU.  A machine  with
- * multiple PCI channels may have multiple PCI host controllers or a
- * single controller supporting multiple channels.
- */
-struct pci_controller {
-        struct pci_controller *next;
-        struct pci_bus *bus;
-
-        struct pci_ops *pci_ops;
-        struct resource *mem_resource;
-        unsigned long mem_offset;
-        struct resource *io_resource;
-        unsigned long io_offset;
-        unsigned long io_map_base;
-
-        unsigned int index;
-        /* For compatibility with current (as of July 2003) pciutils
-           and XFree86. Eventually will be removed. */
-        unsigned int need_domain_info;
-
-        int iommu;
-
-        /* Optional access methods for reading/writing the bus number
-           of the PCI controller */
-        int (*get_busno)(void);
-        void (*set_busno)(int busno);
-};
-
-/*
- * Used by boards to register their PCI busses before the actual scanning.
- */
-extern struct pci_controller * alloc_pci_controller(void);
-extern void register_pci_controller(struct pci_controller *hose);
-
-/*
- * board supplied pci irq fixup routine
- */
-extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-
-
-/* Can be used to override the logic in pci_scan_bus for skipping
-   already-configured bus numbers - to be used for buggy BIOSes
-   or architectures with incomplete PCI setup by the loader */
-
-extern unsigned int pcibios_assign_all_busses(void);
-
-#define pcibios_scan_all_fns(a, b)      0
-
-extern unsigned long PCIBIOS_MIN_IO;
-extern unsigned long PCIBIOS_MIN_MEM;
-
-#define PCIBIOS_MIN_CARDBUS_IO  0x4000
-
-extern void pcibios_set_master(struct pci_dev *dev);
-
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
-        /* We don't do dynamic PCI IRQ allocation */
-}
-
-/*
- * Dynamic DMA mapping stuff.
- * MIPS has everything mapped statically.
- */
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <asm/scatterlist.h>
-#include <linux/string.h>
-#include <asm/io.h>
-
-struct pci_dev;
-
-/*
- * The PCI address space does equal the physical memory address space.  The
- * networking and block device layers use this boolean for bounce buffer
- * decisions.  This is set if any hose does not have an IOMMU.
- */
-extern unsigned int PCI_DMA_BUS_IS_PHYS;
-
-#ifdef CONFIG_DMA_NEED_PCI_MAP_STATE
-
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)       dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)         __u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)          ((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)            ((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)   (((PTR)->LEN_NAME) = (VAL))
-
-#else /* CONFIG_DMA_NEED_PCI_MAP_STATE  */
-
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)          (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)            (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)   do { } while (0)
-
-#endif /* CONFIG_DMA_NEED_PCI_MAP_STATE  */
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-                                        enum pci_dma_burst_strategy *strat,
-                                        unsigned long *strategy_parameter)
-{
-        *strat = PCI_DMA_BURST_INFINITY;
-        *strategy_parameter = ~0UL;
-}
-#endif
-
-extern void pcibios_resource_to_bus(struct pci_dev *dev,
-        struct pci_bus_region *region, struct resource *res);
-
-extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-                                    struct pci_bus_region *region);
-
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
-        struct resource *root = NULL;
-
-        if (res->flags & IORESOURCE_IO)
-                root = &ioport_resource;
-        if (res->flags & IORESOURCE_MEM)
-                root = &iomem_resource;
-
-        return root;
-}
-
-#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
-
-static inline int pci_proc_domain(struct pci_bus *bus)
-{
-        struct pci_controller *hose = bus->sysdata;
-        return hose->need_domain_info;
-}
-
-#endif /* __KERNEL__ */
-
-/* implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
-/* Do platform specific device initialization at pci_enable_device() time */
-extern int pcibios_plat_dev_init(struct pci_dev *dev);
-
-/* Chances are this interrupt is wired PC-style ...  */
-static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
-{
-        return channel ? 15 : 14;
-}
-
-extern int pci_probe_only;
-
-extern char * (*pcibios_plat_setup)(char *str);
-
-#endif /* _ASM_PCI_H */