Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 248 insertions, 0 deletions

diff --git a/include/asm-m68k/mac_psc.h b/include/asm-m68k/mac_psc.h
new file mode 100644
index 000000000000..7808bb0b2323
--- /dev/null
+++ b/include/asm-m68k/mac_psc.h
@@ -0,0 +1,248 @@
+/*
+ * Apple Peripheral System Controller (PSC)
+ *
+ * The PSC is used on the AV Macs to control IO functions not handled
+ * by the VIAs (Ethernet, DSP, SCC, Sound). This includes nine DMA
+ * channels.
+ *
+ * The first seven DMA channels appear to be "one-shot" and are actually
+ * sets of two channels; one member is active while the other is being
+ * configured, and then you flip the active member and start all over again.
+ * The one-shot channels are grouped together and are:
+ *
+ * 1. SCSI
+ * 2. Ethernet Read
+ * 3. Ethernet Write
+ * 4. Floppy Disk Controller
+ * 5. SCC Channel A Receive
+ * 6. SCC Channel B Receive
+ * 7. SCC Channel A Transmit
+ *
+ * The remaining two channels are handled somewhat differently. They appear
+ * to be closely tied and share one set of registers. They also seem to run
+ * continuously, although how you keep the buffer filled in this scenario is
+ * not understood as there seems to be only one input and one output buffer
+ * pointer.
+ *
+ * Much of this was extrapolated from what was known about the Ethernet
+ * registers and subsequently confirmed using MacsBug (ie by pinging the
+ * machine with easy-to-find patterns and looking for them in the DMA
+ * buffers, or by sending a file over the serial ports and finding the
+ * file in the buffers.)
+ *
+ * 1999-05-25 (jmt)
+ */
+
+#define PSC_BASE        (0x50F31000)
+
+/*
+ * The IER/IFR registers work like the VIA, except that it has 4
+ * of them each on different interrupt levels, and each register
+ * set only seems to handle four interrupts instead of seven.
+ *
+ * To access a particular set of registers, add 0xn0 to the base
+ * where n = 3,4,5 or 6.
+ */
+
+#define pIFRbase        0x100
+#define pIERbase        0x104
+
+/*
+ * One-shot DMA control registers
+ */
+
+#define PSC_MYSTERY     0x804
+
+#define PSC_CTL_BASE    0xC00
+
+#define PSC_SCSI_CTL    0xC00
+#define PSC_ENETRD_CTL  0xC10
+#define PSC_ENETWR_CTL  0xC20
+#define PSC_FDC_CTL     0xC30
+#define PSC_SCCA_CTL    0xC40
+#define PSC_SCCB_CTL    0xC50
+#define PSC_SCCATX_CTL  0xC60
+
+/*
+ * DMA channels. Add +0x10 for the second channel in the set.
+ * You're supposed to use one channel while the other runs and
+ * then flip channels and do the whole thing again.
+ */
+
+#define PSC_ADDR_BASE   0x1000
+#define PSC_LEN_BASE    0x1004
+#define PSC_CMD_BASE    0x1008
+
+#define PSC_SET0        0x00
+#define PSC_SET1        0x10
+
+#define PSC_SCSI_ADDR   0x1000  /* confirmed */
+#define PSC_SCSI_LEN    0x1004  /* confirmed */
+#define PSC_SCSI_CMD    0x1008  /* confirmed */
+#define PSC_ENETRD_ADDR 0x1020  /* confirmed */
+#define PSC_ENETRD_LEN  0x1024  /* confirmed */
+#define PSC_ENETRD_CMD  0x1028  /* confirmed */
+#define PSC_ENETWR_ADDR 0x1040  /* confirmed */
+#define PSC_ENETWR_LEN  0x1044  /* confirmed */
+#define PSC_ENETWR_CMD  0x1048  /* confirmed */
+#define PSC_FDC_ADDR    0x1060  /* strongly suspected */
+#define PSC_FDC_LEN     0x1064  /* strongly suspected */
+#define PSC_FDC_CMD     0x1068  /* strongly suspected */
+#define PSC_SCCA_ADDR   0x1080  /* confirmed */
+#define PSC_SCCA_LEN    0x1084  /* confirmed */
+#define PSC_SCCA_CMD    0x1088  /* confirmed */
+#define PSC_SCCB_ADDR   0x10A0  /* confirmed */
+#define PSC_SCCB_LEN    0x10A4  /* confirmed */
+#define PSC_SCCB_CMD    0x10A8  /* confirmed */
+#define PSC_SCCATX_ADDR 0x10C0  /* confirmed */
+#define PSC_SCCATX_LEN  0x10C4  /* confirmed */
+#define PSC_SCCATX_CMD  0x10C8  /* confirmed */
+
+/*
+ * Free-running DMA registers. The only part known for sure are the bits in
+ * the control register, the buffer addresses and the buffer length. Everything
+ * else is anybody's guess.
+ *
+ * These registers seem to be mirrored every thirty-two bytes up until offset
+ * 0x300. It's safe to assume then that a new set of registers starts there.
+ */
+
+#define PSC_SND_CTL     0x200   /*
+                                 * [ 16-bit ]
+                                 * Sound (Singer?) control register.
+                                 *
+                                 * bit 0  : ????
+                                 * bit 1  : ????
+                                 * bit 2  : Set to one to enable sound
+                                 *          output. Possibly a mute flag.
+                                 * bit 3  : ????
+                                 * bit 4  : ????
+                                 * bit 5  : ????
+                                 * bit 6  : Set to one to enable pass-thru
+                                 *          audio. In this mode the audio data
+                                 *          seems to appear in both the input
+                                 *          buffer and the output buffer.
+                                 * bit 7  : Set to one to activate the
+                                 *          sound input DMA or zero to
+                                 *          disable it.
+                                 * bit 8  : Set to one to activate the
+                                 *          sound output DMA or zero to
+                                 *          disable it.
+                                 * bit 9  : \
+                                 * bit 11 :  |
+                                 *          These two bits control the sample
+                                 *          rate. Usually set to binary 10 and
+                                 *          MacOS 8.0 says I'm at 48 KHz. Using
+                                 *          a binary value of 01 makes things
+                                 *          sound about 1/2 speed (24 KHz?) and
+                                 *          binary 00 is slower still (22 KHz?)
+                                 *
+                                 * Setting this to 0x0000 is a good way to
+                                 * kill all DMA at boot time so that the
+                                 * PSC won't overwrite the kernel image
+                                 * with sound data.
+                                 */
+
+/*
+ * 0x0202 - 0x0203 is unused. Writing there
+ * seems to clobber the control register.
+ */
+
+#define PSC_SND_SOURCE  0x204   /*
+                                 * [ 32-bit ]
+                                 * Controls input source and volume:
+                                 *
+                                 * bits 12-15 : input source volume, 0 - F
+                                 * bits 16-19 : unknown, always 0x5
+                                 * bits 20-23 : input source selection:
+                                 *                  0x3 = CD Audio
+                                 *                  0x4 = External Audio
+                                 *
+                                 * The volume is definitely not the general
+                                 * output volume as it doesn't affect the
+                                 * alert sound volume.
+                                 */
+#define PSC_SND_STATUS1 0x208   /*
+                                 * [ 32-bit ]
+                                 * Appears to be a read-only status register.
+                                 * The usual value is 0x00400002.
+                                 */
+#define PSC_SND_HUH3    0x20C   /*
+                                 * [ 16-bit ]
+                                 * Unknown 16-bit value, always 0x0000.
+                                 */
+#define PSC_SND_BITS2GO 0x20E   /*
+                                 * [ 16-bit ]
+                                 * Counts down to zero from some constant
+                                 * value. The value appears to be the
+                                 * number of _bits_ remaining before the
+                                 * buffer is full, which would make sense
+                                 * since Apple's docs say the sound DMA
+                                 * channels are 1 bit wide.
+                                 */
+#define PSC_SND_INADDR  0x210   /*
+                                 * [ 32-bit ]
+                                 * Address of the sound input DMA buffer
+                                 */
+#define PSC_SND_OUTADDR 0x214   /*
+                                 * [ 32-bit ]
+                                 * Address of the sound output DMA buffer
+                                 */
+#define PSC_SND_LEN     0x218   /*
+                                 * [ 16-bit ]
+                                 * Length of both buffers in eight-byte units.
+                                 */
+#define PSC_SND_HUH4    0x21A   /*
+                                 * [ 16-bit ]
+                                 * Unknown, always 0x0000.
+                                 */
+#define PSC_SND_STATUS2 0x21C   /*
+                                 * [ 16-bit ]
+                                 * Appears to e a read-only status register.
+                                 * The usual value is 0x0200.
+                                 */
+#define PSC_SND_HUH5    0x21E   /*
+                                 * [ 16-bit ]
+                                 * Unknown, always 0x0000.
+                                 */
+
+#ifndef __ASSEMBLY__
+
+extern volatile __u8 *psc;
+extern int psc_present;
+
+/*
+ *      Access functions
+ */
+
+static inline void psc_write_byte(int offset, __u8 data)
+{
+        *((volatile __u8 *)(psc + offset)) = data;
+}
+
+static inline void psc_write_word(int offset, __u16 data)
+{
+        *((volatile __u16 *)(psc + offset)) = data;
+}
+
+static inline void psc_write_long(int offset, __u32 data)
+{
+        *((volatile __u32 *)(psc + offset)) = data;
+}
+
+static inline u8 psc_read_byte(int offset)
+{
+        return *((volatile __u8 *)(psc + offset));
+}
+
+static inline u16 psc_read_word(int offset)
+{
+        return *((volatile __u16 *)(psc + offset));
+}
+
+static inline u32 psc_read_long(int offset)
+{
+        return *((volatile __u32 *)(psc + offset));
+}
+
+#endif /* __ASSEMBLY__ */