Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 85 insertions, 0 deletions

diff --git a/include/asm-arm/arch-sa1100/collie.h b/include/asm-arm/arch-sa1100/collie.h
new file mode 100644
index 000000000000..d49e5ff63ca4
--- /dev/null
+++ b/include/asm-arm/arch-sa1100/collie.h
@@ -0,0 +1,85 @@
+/*
+ * linux/include/asm-arm/arch-sa1100/collie.h
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * ChangeLog:
+ *   04-06-2001 Lineo Japan, Inc.
+ *   04-16-2001 SHARP Corporation
+ *   07-07-2002 Chris Larson <clarson@digi.com>
+ *
+ */
+#ifndef __ASM_ARCH_COLLIE_H
+#define __ASM_ARCH_COLLIE_H
+
+#include <linux/config.h>
+
+#define COLLIE_SCP_CHARGE_ON    SCOOP_GPCR_PA11
+#define COLLIE_SCP_DIAG_BOOT1   SCOOP_GPCR_PA12
+#define COLLIE_SCP_DIAG_BOOT2   SCOOP_GPCR_PA13
+#define COLLIE_SCP_MUTE_L       SCOOP_GPCR_PA14
+#define COLLIE_SCP_MUTE_R       SCOOP_GPCR_PA15
+#define COLLIE_SCP_5VON         SCOOP_GPCR_PA16
+#define COLLIE_SCP_AMP_ON       SCOOP_GPCR_PA17
+#define COLLIE_SCP_VPEN         SCOOP_GPCR_PA18
+#define COLLIE_SCP_LB_VOL_CHG   SCOOP_GPCR_PA19
+
+#define COLLIE_SCOOP_IO_DIR     ( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+                                COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
+                                COLLIE_SCP_LB_VOL_CHG )
+#define COLLIE_SCOOP_IO_OUT     ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
+                                COLLIE_SCP_CHARGE_ON )
+
+/* GPIOs for which the generic definition doesn't say much */
+
+#define COLLIE_GPIO_ON_KEY              GPIO_GPIO (0)
+#define COLLIE_GPIO_AC_IN               GPIO_GPIO (1)
+#define COLLIE_GPIO_CF_IRQ              GPIO_GPIO (14)
+#define COLLIE_GPIO_nREMOCON_INT        GPIO_GPIO (15)
+#define COLLIE_GPIO_UCB1x00_RESET       GPIO_GPIO (16)
+#define COLLIE_GPIO_CO                  GPIO_GPIO (20)
+#define COLLIE_GPIO_MCP_CLK             GPIO_GPIO (21)
+#define COLLIE_GPIO_CF_CD               GPIO_GPIO (22)
+#define COLLIE_GPIO_UCB1x00_IRQ         GPIO_GPIO (23)
+#define COLLIE_GPIO_WAKEUP              GPIO_GPIO (24)
+#define COLLIE_GPIO_GA_INT              GPIO_GPIO (25)
+#define COLLIE_GPIO_MAIN_BAT_LOW        GPIO_GPIO (26)
+
+/* Interrupts */
+
+#define COLLIE_IRQ_GPIO_ON_KEY          IRQ_GPIO0
+#define COLLIE_IRQ_GPIO_AC_IN           IRQ_GPIO1
+#define COLLIE_IRQ_GPIO_CF_IRQ          IRQ_GPIO14
+#define COLLIE_IRQ_GPIO_nREMOCON_INT    IRQ_GPIO15
+#define COLLIE_IRQ_GPIO_CO              IRQ_GPIO20
+#define COLLIE_IRQ_GPIO_CF_CD           IRQ_GPIO22
+#define COLLIE_IRQ_GPIO_UCB1x00_IRQ     IRQ_GPIO23
+#define COLLIE_IRQ_GPIO_WAKEUP          IRQ_GPIO24
+#define COLLIE_IRQ_GPIO_GA_INT          IRQ_GPIO25
+#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW    IRQ_GPIO26
+
+#define COLLIE_LCM_IRQ_GPIO_RTS         IRQ_LOCOMO_GPIO0
+#define COLLIE_LCM_IRQ_GPIO_CTS         IRQ_LOCOMO_GPIO1
+#define COLLIE_LCM_IRQ_GPIO_DSR         IRQ_LOCOMO_GPIO2
+#define COLLIE_LCM_IRQ_GPIO_DTR         IRQ_LOCOMO_GPIO3
+#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT  IRQ_LOCOMO_GPIO13
+#define COLLIE_LCM_IRQ_GPIO_nSD_WP      IRQ_LOCOMO_GPIO14
+
+/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
+#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0        /* GPIO0=Version                 */
+#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1        /* GPIO1=TBL_CHK                 */
+#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2        /* GPIO2=VPNE_ON                 */
+#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3        /* GPIO3=IR_ON                   */
+#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4        /* GPIO4=AMP_ON                  */
+#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5        /* GPIO5=Version                 */
+#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5        /* GPIO5=fs 8k LPF               */
+#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6        /* GPIO6=BUZZER BIAS             */
+#define COLLIE_TC35143_GPIO_MBAT_ON     UCB_IO_7        /* GPIO7=MBAT_ON                 */
+#define COLLIE_TC35143_GPIO_BBAT_ON     UCB_IO_8        /* GPIO8=BBAT_ON                 */
+#define COLLIE_TC35143_GPIO_TMP_ON      UCB_IO_9        /* GPIO9=TMP_ON                  */
+#define COLLIE_TC35143_GPIO_IN          ( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
+#define COLLIE_TC35143_GPIO_OUT         ( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
+                                        UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
+
+#endif