Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 126 insertions, 0 deletions

diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
new file mode 100644
index 000000000000..3a626c03ea26
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/platform.h
@@ -0,0 +1,126 @@
+/*
+ * include/asm-arm/arch-ixp4xx/platform.h
+ *
+ * Constants and functions that are useful to IXP4xx platform-specific code
+ * and device drivers.
+ *
+ * Copyright (C) 2004 MontaVista Software, Inc.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+#ifndef __ARMEB__
+#define REG_OFFSET      0
+#else
+#define REG_OFFSET      3
+#endif
+
+/*
+ * Expansion bus memory regions
+ */
+#define IXP4XX_EXP_BUS_BASE_PHYS        (0x50000000)
+
+#define IXP4XX_EXP_BUS_CSX_REGION_SIZE  (0x01000000)
+
+#define IXP4XX_EXP_BUS_CS0_BASE_PHYS    (IXP4XX_EXP_BUS_BASE_PHYS + 0x00000000)
+#define IXP4XX_EXP_BUS_CS1_BASE_PHYS    (IXP4XX_EXP_BUS_BASE_PHYS + 0x01000000)
+#define IXP4XX_EXP_BUS_CS2_BASE_PHYS    (IXP4XX_EXP_BUS_BASE_PHYS + 0x02000000)
+#define IXP4XX_EXP_BUS_CS3_BASE_PHYS    (IXP4XX_EXP_BUS_BASE_PHYS + 0x03000000)
+#define IXP4XX_EXP_BUS_CS4_BASE_PHYS    (IXP4XX_EXP_BUS_BASE_PHYS + 0x04000000)
+#define IXP4XX_EXP_BUS_CS5_BASE_PHYS    (IXP4XX_EXP_BUS_BASE_PHYS + 0x05000000)
+#define IXP4XX_EXP_BUS_CS6_BASE_PHYS    (IXP4XX_EXP_BUS_BASE_PHYS + 0x06000000)
+#define IXP4XX_EXP_BUS_CS7_BASE_PHYS    (IXP4XX_EXP_BUS_BASE_PHYS + 0x07000000)
+
+#define IXP4XX_FLASH_WRITABLE   (0x2)
+#define IXP4XX_FLASH_DEFAULT    (0xbcd23c40)
+#define IXP4XX_FLASH_WRITE      (0xbcd23c42)
+
+/*
+ * Clock Speed Definitions.
+ */
+#define IXP4XX_PERIPHERAL_BUS_CLOCK     (66) /* 66Mhzi APB BUS   */ 
+#define IXP4XX_UART_XTAL                14745600
+
+/*
+ * The IXP4xx chips do not have an I2C unit, so GPIO lines are just
+ * used to 
+ * Used as platform_data to provide GPIO pin information to the ixp42x
+ * I2C driver.
+ */
+struct ixp4xx_i2c_pins {
+        unsigned long sda_pin;
+        unsigned long scl_pin;
+};
+
+
+struct sys_timer;
+
+/*
+ * Functions used by platform-level setup code
+ */
+extern void ixp4xx_map_io(void);
+extern void ixp4xx_init_irq(void);
+extern void ixp4xx_sys_init(void);
+extern struct sys_timer ixp4xx_timer;
+extern void ixp4xx_pci_preinit(void);
+struct pci_sys_data;
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+/*
+ * GPIO-functions
+ */
+/*
+ * The following converted to the real HW bits the gpio_line_config
+ */
+/* GPIO pin types */
+#define IXP4XX_GPIO_OUT                 0x1
+#define IXP4XX_GPIO_IN                  0x2
+
+#define IXP4XX_GPIO_INTSTYLE_MASK       0x7C  /* Bits [6:2] define interrupt style */
+
+/* 
+ * GPIO interrupt types.
+ */
+#define IXP4XX_GPIO_ACTIVE_HIGH         0x4 /* Default */
+#define IXP4XX_GPIO_ACTIVE_LOW          0x8
+#define IXP4XX_GPIO_RISING_EDGE         0x10
+#define IXP4XX_GPIO_FALLING_EDGE        0x20
+#define IXP4XX_GPIO_TRANSITIONAL        0x40
+
+/* GPIO signal types */
+#define IXP4XX_GPIO_LOW                 0
+#define IXP4XX_GPIO_HIGH                1
+
+/* GPIO Clocks */
+#define IXP4XX_GPIO_CLK_0               14
+#define IXP4XX_GPIO_CLK_1               15
+
+extern void gpio_line_config(u8 line, u32 style);
+
+static inline void gpio_line_get(u8 line, int *value)
+{
+        *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
+}
+
+static inline void gpio_line_set(u8 line, int value)
+{
+        if (value == IXP4XX_GPIO_HIGH)
+            *IXP4XX_GPIO_GPOUTR |= (1 << line);
+        else if (value == IXP4XX_GPIO_LOW)
+            *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
+}
+
+static inline void gpio_line_isr_clear(u8 line)
+{
+        *IXP4XX_GPIO_GPISR = (1 << line);
+}
+
+#endif // __ASSEMBLY__
+