Merge tag 'omap-for-v3.13/fixes-against-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:

Some omap related fixes that have come up with people moving to device
tree only based booting for omap2+.

The series contains a handful of fixes for the igep boards as they were
one of the first omap3 boards to jump over completely to device tree
based booting. So these can be considered regressions compared to
booting igep in legacy mode with board files in v3.12.

Also included are few other device tree vs legacy booting regressions:

- yet more missing omap3 .dtsi entries that have showed up booting
  various boards with device tree only

- n900 eMMC device tree fix

- fixes for beagle USB EHCI

- two fixes to make omap2420 MMC work

As we're moving omap2+ to be device tree only for v3.14, I'd like to
have v3.13 work equally well for legacy based booting and device tree
based booting. So there will be likely few more device tree related
booting patches trickling in.

This series also includes a regression fix for the omap timer posted
mode that may wrongly stay on from the bootloader for some SoCs.

* tag 'omap-for-v3.13/fixes-against-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  mmc: omap: Fix I2C dependency and make driver usable with device tree
  mmc: omap: Fix DMA configuration to not rely on device id
  ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)
  ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi
  ARM: dts: AM33XX IGEP0033: add USB support
  ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support
  ARM: dts: AM33XX BASE0033: add pinmux and user led support
  ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display
  ARM: dts: omap3-igep0020: Add pinmuxing for DVI output
  ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices
  ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor
  ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO
  ARM: dts: omap3-igep: Fix bus-width for mmc1
  ARM: OMAP2+: dss-common: change IGEP's DVI DDC i2c bus
  ARM: OMAP2+: Disable POSTED mode for errata i103 and i767
  ARM: OMAP2+: Fix eMMC on n900 with device tree
  ARM: OMAP2+: Add fixed regulator to omap2plus_defconfig
  ARM: OMAP2+: Fix more missing data for omap3.dtsi file

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 22 insertions, 23 deletions

diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 0b10a9030f4e..98b6b6ef7e5c 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -22,6 +22,7 @@
 #include <linux/delay.h>
 #include <linux/spinlock.h>
 #include <linux/timer.h>
+#include <linux/of.h>
 #include <linux/omap-dma.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
@@ -90,17 +91,6 @@
 #define OMAP_MMC_CMDTYPE_AC     2
 #define OMAP_MMC_CMDTYPE_ADTC   3
 
-#define OMAP_DMA_MMC_TX         21
-#define OMAP_DMA_MMC_RX         22
-#define OMAP_DMA_MMC2_TX        54
-#define OMAP_DMA_MMC2_RX        55
-
-#define OMAP24XX_DMA_MMC2_TX    47
-#define OMAP24XX_DMA_MMC2_RX    48
-#define OMAP24XX_DMA_MMC1_TX    61
-#define OMAP24XX_DMA_MMC1_RX    62
-
-
 #define DRIVER_NAME "mmci-omap"
 
 /* Specifies how often in millisecs to poll for card status changes
@@ -1330,7 +1320,7 @@ static int mmc_omap_probe(struct platform_device *pdev)
         struct mmc_omap_host *host = NULL;
         struct resource *res;
         dma_cap_mask_t mask;
-        unsigned sig;
+        unsigned sig = 0;
         int i, ret = 0;
         int irq;
 
@@ -1340,7 +1330,7 @@ static int mmc_omap_probe(struct platform_device *pdev)
         }
         if (pdata->nr_slots == 0) {
                 dev_err(&pdev->dev, "no slots\n");
-                return -ENXIO;
+                return -EPROBE_DEFER;
         }
 
         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1407,19 +1397,20 @@ static int mmc_omap_probe(struct platform_device *pdev)
         host->dma_tx_burst = -1;
         host->dma_rx_burst = -1;
 
-        if (mmc_omap2())
-                sig = host->id == 0 ? OMAP24XX_DMA_MMC1_TX : OMAP24XX_DMA_MMC2_TX;
-        else
-                sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX;
-        host->dma_tx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
+        res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
+        if (res)
+                sig = res->start;
+        host->dma_tx = dma_request_slave_channel_compat(mask,
+                                omap_dma_filter_fn, &sig, &pdev->dev, "tx");
         if (!host->dma_tx)
                 dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n",
                         sig);
-        if (mmc_omap2())
-                sig = host->id == 0 ? OMAP24XX_DMA_MMC1_RX : OMAP24XX_DMA_MMC2_RX;
-        else
-                sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX;
-        host->dma_rx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
+
+        res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
+        if (res)
+                sig = res->start;
+        host->dma_rx = dma_request_slave_channel_compat(mask,
+                                omap_dma_filter_fn, &sig, &pdev->dev, "rx");
         if (!host->dma_rx)
                 dev_warn(host->dev, "unable to obtain RX DMA engine channel %u\n",
                         sig);
@@ -1512,12 +1503,20 @@ static int mmc_omap_remove(struct platform_device *pdev)
         return 0;
 }
 
+#if IS_BUILTIN(CONFIG_OF)
+static const struct of_device_id mmc_omap_match[] = {
+        { .compatible = "ti,omap2420-mmc", },
+        { },
+};
+#endif
+
 static struct platform_driver mmc_omap_driver = {
         .probe          = mmc_omap_probe,
         .remove         = mmc_omap_remove,
         .driver         = {
                 .name   = DRIVER_NAME,
                 .owner  = THIS_MODULE,
+                .of_match_table = of_match_ptr(mmc_omap_match),
         },
 };