PXA UDC - allow use of inverted GPIO for pullup

Signed-off-by: Ian Molton <spyro@f2s.com>

1 files changed, 4 insertions, 2 deletions

diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 031dceb93023..5d50031938ab 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -152,9 +152,10 @@ static int is_vbus_present(void)
 static void pullup_off(void)
 {
         struct pxa2xx_udc_mach_info             *mach = the_controller->mach;
+        int off_level = mach->gpio_pullup_inverted;
 
         if (mach->gpio_pullup)
-                gpio_set_value(mach->gpio_pullup, 0);
+                gpio_set_value(mach->gpio_pullup, off_level);
         else if (mach->udc_command)
                 mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
 }
@@ -162,9 +163,10 @@ static void pullup_off(void)
 static void pullup_on(void)
 {
         struct pxa2xx_udc_mach_info             *mach = the_controller->mach;
+        int on_level = !mach->gpio_pullup_inverted;
 
         if (mach->gpio_pullup)
-                gpio_set_value(mach->gpio_pullup, 1);
+                gpio_set_value(mach->gpio_pullup, on_level);
         else if (mach->udc_command)
                 mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
 }