IB/ipath: kbuild infrastructure

Integrate the ipath core and OpenIB drivers into the kernel build
infrastructure.  Add entry to MAINTAINERS.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

5 files changed, 55 insertions, 0 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index 424955274e60..2449ec55ca28 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_EISA)		+= eisa/
 obj-$(CONFIG_CPU_FREQ)          += cpufreq/
 obj-$(CONFIG_MMC)               += mmc/
 obj-$(CONFIG_INFINIBAND)        += infiniband/
+obj-$(CONFIG_IPATH_CORE)        += infiniband/
 obj-$(CONFIG_SGI_SN)            += sn/
 obj-y                           += firmware/
 obj-$(CONFIG_CRYPTO)            += crypto/
diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index bdf0891a92dd..afc612b8577d 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -30,6 +30,7 @@ config INFINIBAND_USER_ACCESS
           <http://www.openib.org>.
 
 source "drivers/infiniband/hw/mthca/Kconfig"
+source "drivers/infiniband/hw/ipath/Kconfig"
 
 source "drivers/infiniband/ulp/ipoib/Kconfig"
 
diff --git a/drivers/infiniband/Makefile b/drivers/infiniband/Makefile
index a43fb34cca94..eea27322a22d 100644
--- a/drivers/infiniband/Makefile
+++ b/drivers/infiniband/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_INFINIBAND)                += core/
 obj-$(CONFIG_INFINIBAND_MTHCA)          += hw/mthca/
+obj-$(CONFIG_IPATH_CORE)                += hw/ipath/
 obj-$(CONFIG_INFINIBAND_IPOIB)          += ulp/ipoib/
 obj-$(CONFIG_INFINIBAND_SRP)            += ulp/srp/
diff --git a/drivers/infiniband/hw/ipath/Kconfig b/drivers/infiniband/hw/ipath/Kconfig
new file mode 100644
index 000000000000..9ea67c409b6d
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/Kconfig
@@ -0,0 +1,16 @@
+config IPATH_CORE
+        tristate "PathScale InfiniPath Driver"
+        depends on 64BIT && PCI_MSI && NET
+        ---help---
+        This is a low-level driver for PathScale InfiniPath host channel
+        adapters (HCAs) based on the HT-400 and PE-800 chips.
+
+config INFINIBAND_IPATH
+        tristate "PathScale InfiniPath Verbs Driver"
+        depends on IPATH_CORE && INFINIBAND
+        ---help---
+        This is a driver that provides InfiniBand verbs support for
+        PathScale InfiniPath host channel adapters (HCAs).  This
+        allows these devices to be used with both kernel upper level
+        protocols such as IP-over-InfiniBand as well as with userspace
+        applications (in conjunction with InfiniBand userspace access).
diff --git a/drivers/infiniband/hw/ipath/Makefile b/drivers/infiniband/hw/ipath/Makefile
new file mode 100644
index 000000000000..b4d084abfd22
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/Makefile
@@ -0,0 +1,36 @@
+EXTRA_CFLAGS += -DIPATH_IDSTR='"PathScale kernel.org driver"' \
+        -DIPATH_KERN_TYPE=0
+
+obj-$(CONFIG_IPATH_CORE) += ipath_core.o
+obj-$(CONFIG_INFINIBAND_IPATH) += ib_ipath.o
+
+ipath_core-y := \
+        ipath_diag.o \
+        ipath_driver.o \
+        ipath_eeprom.o \
+        ipath_file_ops.o \
+        ipath_fs.o \
+        ipath_ht400.o \
+        ipath_init_chip.o \
+        ipath_intr.o \
+        ipath_layer.o \
+        ipath_pe800.o \
+        ipath_stats.o \
+        ipath_sysfs.o \
+        ipath_user_pages.o
+
+ipath_core-$(CONFIG_X86_64) += ipath_wc_x86_64.o
+
+ib_ipath-y := \
+        ipath_cq.o \
+        ipath_keys.o \
+        ipath_mad.o \
+        ipath_mr.o \
+        ipath_qp.o \
+        ipath_rc.o \
+        ipath_ruc.o \
+        ipath_srq.o \
+        ipath_uc.o \
+        ipath_ud.o \
+        ipath_verbs.o \
+        ipath_verbs_mcast.o