bnx2x: Fix XMAC loopback test

Change XMAC loopback type from CORE LOCAL to LINE LOCAL for the BCM578xx due to intermittent problem with the loopback with this configuration.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 2 insertions, 2 deletions

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index db5913da5527..342807585c2b 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -1720,7 +1720,7 @@ static int bnx2x_xmac_enable(struct link_params *params,
 
         /* Check loopback mode */
         if (lb)
-                val |= XMAC_CTRL_REG_CORE_LOCAL_LPBK;
+                val |= XMAC_CTRL_REG_LINE_LOCAL_LPBK;
         REG_WR(bp, xmac_base + XMAC_REG_CTRL, val);
         bnx2x_set_xumac_nig(params,
                             ((vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) != 0), 1);
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 057738623ba4..750e8445dac4 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -5320,7 +5320,7 @@
 #define XCM_REG_XX_OVFL_EVNT_ID                                  0x20058
 #define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS    (0x1<<0)
 #define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS   (0x1<<1)
-#define XMAC_CTRL_REG_CORE_LOCAL_LPBK                            (0x1<<3)
+#define XMAC_CTRL_REG_LINE_LOCAL_LPBK                            (0x1<<2)
 #define XMAC_CTRL_REG_RX_EN                                      (0x1<<1)
 #define XMAC_CTRL_REG_SOFT_RESET                                 (0x1<<6)
 #define XMAC_CTRL_REG_TX_EN                                      (0x1<<0)