Merge branch 'linux-2.6' into next

26 files changed, 263 insertions, 169 deletions

diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
index 25f531d892de..40e60fc2e596 100644
--- a/drivers/acpi/toshiba_acpi.c
+++ b/drivers/acpi/toshiba_acpi.c
@@ -824,32 +824,36 @@ static int __init toshiba_acpi_init(void)
                         toshiba_acpi_exit();
                         return -ENOMEM;
                 }
-        }
 
-        /* Register input device for kill switch */
-        toshiba_acpi.poll_dev = input_allocate_polled_device();
-        if (!toshiba_acpi.poll_dev) {
-                printk(MY_ERR "unable to allocate kill-switch input device\n");
-                toshiba_acpi_exit();
-                return -ENOMEM;
-        }
-        toshiba_acpi.poll_dev->private = &toshiba_acpi;
-        toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
-        toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
-
-        toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
-        toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
-        toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */
-        set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
-        set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
-        input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
-        input_sync(toshiba_acpi.poll_dev->input);
-
-        ret = input_register_polled_device(toshiba_acpi.poll_dev);
-        if (ret) {
-                printk(MY_ERR "unable to register kill-switch input device\n");
-                toshiba_acpi_exit();
-                return ret;
+                /* Register input device for kill switch */
+                toshiba_acpi.poll_dev = input_allocate_polled_device();
+                if (!toshiba_acpi.poll_dev) {
+                        printk(MY_ERR
+                               "unable to allocate kill-switch input device\n");
+                        toshiba_acpi_exit();
+                        return -ENOMEM;
+                }
+                toshiba_acpi.poll_dev->private = &toshiba_acpi;
+                toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
+                toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
+
+                toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
+                toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
+                /* Toshiba USB ID */
+                toshiba_acpi.poll_dev->input->id.vendor = 0x0930;
+                set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
+                set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
+                input_report_switch(toshiba_acpi.poll_dev->input,
+                                    SW_RFKILL_ALL, TRUE);
+                input_sync(toshiba_acpi.poll_dev->input);
+
+                ret = input_register_polled_device(toshiba_acpi.poll_dev);
+                if (ret) {
+                        printk(MY_ERR
+                               "unable to register kill-switch input device\n");
+                        toshiba_acpi_exit();
+                        return ret;
+                }
         }
 
         return 0;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 5e2eb740df46..bc6695e3c848 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4050,17 +4050,70 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
         { "ST3160023AS",        "3.42",         ATA_HORKAGE_NONCQ },
 
         /* Seagate NCQ + FLUSH CACHE firmware bug */
-        { "ST31500341AS",       "9JU138",       ATA_HORKAGE_NONCQ |
+        { "ST31500341AS",       "SD15",         ATA_HORKAGE_NONCQ |
                                                 ATA_HORKAGE_FIRMWARE_WARN },
-        { "ST31000333AS",       "9FZ136",       ATA_HORKAGE_NONCQ |
+        { "ST31500341AS",       "SD16",         ATA_HORKAGE_NONCQ |
                                                 ATA_HORKAGE_FIRMWARE_WARN },
-        { "ST3640623AS",        "9FZ164",       ATA_HORKAGE_NONCQ |
+        { "ST31500341AS",       "SD17",         ATA_HORKAGE_NONCQ |
                                                 ATA_HORKAGE_FIRMWARE_WARN },
-        { "ST3640323AS",        "9FZ134",       ATA_HORKAGE_NONCQ |
+        { "ST31500341AS",       "SD18",         ATA_HORKAGE_NONCQ |
                                                 ATA_HORKAGE_FIRMWARE_WARN },
-        { "ST3320813AS",        "9FZ182",       ATA_HORKAGE_NONCQ |
+        { "ST31500341AS",       "SD19",         ATA_HORKAGE_NONCQ |
                                                 ATA_HORKAGE_FIRMWARE_WARN },
-        { "ST3320613AS",        "9FZ162",       ATA_HORKAGE_NONCQ |
+
+        { "ST31000333AS",       "SD15",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST31000333AS",       "SD16",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST31000333AS",       "SD17",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST31000333AS",       "SD18",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST31000333AS",       "SD19",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+
+        { "ST3640623AS",        "SD15",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST3640623AS",        "SD16",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST3640623AS",        "SD17",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST3640623AS",        "SD18",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST3640623AS",        "SD19",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+
+        { "ST3640323AS",        "SD15",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST3640323AS",        "SD16",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST3640323AS",        "SD17",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST3640323AS",        "SD18",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST3640323AS",        "SD19",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+
+        { "ST3320813AS",        "SD15",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST3320813AS",        "SD16",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST3320813AS",        "SD17",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST3320813AS",        "SD18",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST3320813AS",        "SD19",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+
+        { "ST3320613AS",        "SD15",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST3320613AS",        "SD16",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST3320613AS",        "SD17",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST3320613AS",        "SD18",         ATA_HORKAGE_NONCQ |
+                                                ATA_HORKAGE_FIRMWARE_WARN },
+        { "ST3320613AS",        "SD19",         ATA_HORKAGE_NONCQ |
                                                 ATA_HORKAGE_FIRMWARE_WARN },
 
         /* Blacklist entries taken from Silicon Image 3124/3132
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index a098ba8eaab6..e0c4f05d7d57 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -183,7 +183,9 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask)
                         mask &= ~(0xF8 << ATA_SHIFT_UDMA);
                 if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
                         mask &= ~(0xF0 << ATA_SHIFT_UDMA);
-        }
+        } else if (adev->class == ATA_DEV_ATAPI)
+                mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+
         return ata_bmdma_mode_filter(adev, mask);
 }
 
@@ -211,11 +213,15 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
 
 static int hpt36x_cable_detect(struct ata_port *ap)
 {
-        u8 ata66;
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+        u8 ata66;
 
+        /*
+         * Each channel of pata_hpt366 occupies separate PCI function
+         * as the primary channel and bit1 indicates the cable type.
+         */
         pci_read_config_byte(pdev, 0x5A, &ata66);
-        if (ata66 & (1 << ap->port_no))
+        if (ata66 & 2)
                 return ATA_CBL_PATA40;
         return ATA_CBL_PATA80;
 }
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c
index aa7f7962a9a0..05d897764f02 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.c
+++ b/drivers/char/xilinx_hwicap/buffer_icap.c
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2008 Xilinx Inc.
  *     All rights reserved.
  *
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h
index 8b0252bf06e2..d4f419ee87ab 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.h
+++ b/drivers/char/xilinx_hwicap/buffer_icap.h
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2008 Xilinx Inc.
  *     All rights reserved.
  *
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 776b50528478..02225eb19cf6 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2007-2008 Xilinx Inc.
  *     All rights reserved.
  *
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h
index 62bda453c90b..4c9dd9a3b62a 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.h
+++ b/drivers/char/xilinx_hwicap/fifo_icap.h
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2007-2008 Xilinx Inc.
  *     All rights reserved.
  *
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index d16131949097..f40ab699860f 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2002 Xilinx Inc., Systems Engineering Group
  *     (c) Copyright 2004 Xilinx Inc., Systems Engineering Group
  *     (c) Copyright 2007-2008 Xilinx Inc.
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index 24d0d9b938fb..8cca11981c5f 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2007 Xilinx Inc.
  *     All rights reserved.
  *
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 228f75723063..3fcf78e906db 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -365,6 +365,7 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
                 pmsg = &msgs[tptr];
                 if (pmsg->flags & I2C_M_RD)
                         ret = wait_event_interruptible_timeout(cpm->i2c_wait,
+                                (in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) ||
                                 !(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY),
                                 1 * HZ);
                 else
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 1fac4e233133..b7434d24904e 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -56,6 +56,7 @@ enum s3c24xx_i2c_state {
 struct s3c24xx_i2c {
         spinlock_t              lock;
         wait_queue_head_t       wait;
+        unsigned int            suspended:1;
 
         struct i2c_msg          *msg;
         unsigned int            msg_num;
@@ -507,7 +508,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int
         unsigned long timeout;
         int ret;
 
-        if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN))
+        if (i2c->suspended)
                 return -EIO;
 
         ret = s3c24xx_i2c_set_master(i2c);
@@ -986,17 +987,26 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
+static int s3c24xx_i2c_suspend_late(struct platform_device *dev,
+                                    pm_message_t msg)
+{
+        struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
+        i2c->suspended = 1;
+        return 0;
+}
+
 static int s3c24xx_i2c_resume(struct platform_device *dev)
 {
         struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
 
-        if (i2c != NULL)
-                s3c24xx_i2c_init(i2c);
+        i2c->suspended = 0;
+        s3c24xx_i2c_init(i2c);
 
         return 0;
 }
 
 #else
+#define s3c24xx_i2c_suspend_late NULL
 #define s3c24xx_i2c_resume NULL
 #endif
 
@@ -1005,6 +1015,7 @@ static int s3c24xx_i2c_resume(struct platform_device *dev)
 static struct platform_driver s3c2410_i2c_driver = {
         .probe          = s3c24xx_i2c_probe,
         .remove         = s3c24xx_i2c_remove,
+        .suspend_late   = s3c24xx_i2c_suspend_late,
         .resume         = s3c24xx_i2c_resume,
         .driver         = {
                 .owner  = THIS_MODULE,
@@ -1015,6 +1026,7 @@ static struct platform_driver s3c2410_i2c_driver = {
 static struct platform_driver s3c2440_i2c_driver = {
         .probe          = s3c24xx_i2c_probe,
         .remove         = s3c24xx_i2c_remove,
+        .suspend_late   = s3c24xx_i2c_suspend_late,
         .resume         = s3c24xx_i2c_resume,
         .driver         = {
                 .owner  = THIS_MODULE,
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index d333ae22459c..79ef5fd928ae 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -115,8 +115,14 @@ static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, u16 length,
         return error;
 }
 
+#define OUI_FREECOM_TECHNOLOGIES_GMBH 0x0001db
+
 static int nodemgr_get_max_rom(quadlet_t *bus_info_data, void *__ci)
 {
+        /* Freecom FireWire Hard Drive firmware bug */
+        if (be32_to_cpu(bus_info_data[3]) >> 8 == OUI_FREECOM_TECHNOLOGIES_GMBH)
+                return 0;
+
         return (be32_to_cpu(bus_info_data[2]) >> 8) & 0x3;
 }
 
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 523b9716a543..d115a6d30f29 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1893,12 +1893,17 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
                 ctrl |= E1000_CTRL_PHY_RST;
         }
         ret_val = e1000_acquire_swflag_ich8lan(hw);
+        /* Whether or not the swflag was acquired, we need to reset the part */
         hw_dbg(hw, "Issuing a global reset to ich8lan");
         ew32(CTRL, (ctrl | E1000_CTRL_RST));
         msleep(20);
 
-        /* release the swflag because it is not reset by hardware reset */
-        e1000_release_swflag_ich8lan(hw);
+        if (!ret_val) {
+                /* release the swflag because it is not reset by
+                 * hardware reset
+                 */
+                e1000_release_swflag_ich8lan(hw);
+        }
 
         ret_val = e1000e_get_auto_rd_done(hw);
         if (ret_val) {
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 1349e419673c..fed7eba65ead 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1142,6 +1142,70 @@ static int gem_start_xmit(struct sk_buff *skb, struct net_device *dev)
         return NETDEV_TX_OK;
 }
 
+static void gem_pcs_reset(struct gem *gp)
+{
+        int limit;
+        u32 val;
+
+        /* Reset PCS unit. */
+        val = readl(gp->regs + PCS_MIICTRL);
+        val |= PCS_MIICTRL_RST;
+        writel(val, gp->regs + PCS_MIICTRL);
+
+        limit = 32;
+        while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
+                udelay(100);
+                if (limit-- <= 0)
+                        break;
+        }
+        if (limit <= 0)
+                printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
+                       gp->dev->name);
+}
+
+static void gem_pcs_reinit_adv(struct gem *gp)
+{
+        u32 val;
+
+        /* Make sure PCS is disabled while changing advertisement
+         * configuration.
+         */
+        val = readl(gp->regs + PCS_CFG);
+        val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
+        writel(val, gp->regs + PCS_CFG);
+
+        /* Advertise all capabilities except assymetric
+         * pause.
+         */
+        val = readl(gp->regs + PCS_MIIADV);
+        val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
+                PCS_MIIADV_SP | PCS_MIIADV_AP);
+        writel(val, gp->regs + PCS_MIIADV);
+
+        /* Enable and restart auto-negotiation, disable wrapback/loopback,
+         * and re-enable PCS.
+         */
+        val = readl(gp->regs + PCS_MIICTRL);
+        val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
+        val &= ~PCS_MIICTRL_WB;
+        writel(val, gp->regs + PCS_MIICTRL);
+
+        val = readl(gp->regs + PCS_CFG);
+        val |= PCS_CFG_ENABLE;
+        writel(val, gp->regs + PCS_CFG);
+
+        /* Make sure serialink loopback is off.  The meaning
+         * of this bit is logically inverted based upon whether
+         * you are in Serialink or SERDES mode.
+         */
+        val = readl(gp->regs + PCS_SCTRL);
+        if (gp->phy_type == phy_serialink)
+                val &= ~PCS_SCTRL_LOOP;
+        else
+                val |= PCS_SCTRL_LOOP;
+        writel(val, gp->regs + PCS_SCTRL);
+}
+
 #define STOP_TRIES 32
 
 /* Must be invoked under gp->lock and gp->tx_lock. */
@@ -1168,6 +1232,9 @@ static void gem_reset(struct gem *gp)
 
         if (limit <= 0)
                 printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
+
+        if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
+                gem_pcs_reinit_adv(gp);
 }
 
 /* Must be invoked under gp->lock and gp->tx_lock. */
@@ -1324,7 +1391,7 @@ static int gem_set_link_modes(struct gem *gp)
                    gp->phy_type == phy_serdes) {
                 u32 pcs_lpa = readl(gp->regs + PCS_MIILP);
 
-                if (pcs_lpa & PCS_MIIADV_FD)
+                if ((pcs_lpa & PCS_MIIADV_FD) || gp->phy_type == phy_serdes)
                         full_duplex = 1;
                 speed = SPEED_1000;
         }
@@ -1488,6 +1555,9 @@ static void gem_link_timer(unsigned long data)
                         val = readl(gp->regs + PCS_MIISTAT);
 
                 if ((val & PCS_MIISTAT_LS) != 0) {
+                        if (gp->lstate == link_up)
+                                goto restart;
+
                         gp->lstate = link_up;
                         netif_carrier_on(gp->dev);
                         (void)gem_set_link_modes(gp);
@@ -1708,61 +1778,8 @@ static void gem_init_phy(struct gem *gp)
                 if (gp->phy_mii.def && gp->phy_mii.def->ops->init)
                         gp->phy_mii.def->ops->init(&gp->phy_mii);
         } else {
-                u32 val;
-                int limit;
-
-                /* Reset PCS unit. */
-                val = readl(gp->regs + PCS_MIICTRL);
-                val |= PCS_MIICTRL_RST;
-                writel(val, gp->regs + PCS_MIICTRL);
-
-                limit = 32;
-                while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
-                        udelay(100);
-                        if (limit-- <= 0)
-                                break;
-                }
-                if (limit <= 0)
-                        printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
-                               gp->dev->name);
-
-                /* Make sure PCS is disabled while changing advertisement
-                 * configuration.
-                 */
-                val = readl(gp->regs + PCS_CFG);
-                val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
-                writel(val, gp->regs + PCS_CFG);
-
-                /* Advertise all capabilities except assymetric
-                 * pause.
-                 */
-                val = readl(gp->regs + PCS_MIIADV);
-                val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
-                        PCS_MIIADV_SP | PCS_MIIADV_AP);
-                writel(val, gp->regs + PCS_MIIADV);
-
-                /* Enable and restart auto-negotiation, disable wrapback/loopback,
-                 * and re-enable PCS.
-                 */
-                val = readl(gp->regs + PCS_MIICTRL);
-                val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
-                val &= ~PCS_MIICTRL_WB;
-                writel(val, gp->regs + PCS_MIICTRL);
-
-                val = readl(gp->regs + PCS_CFG);
-                val |= PCS_CFG_ENABLE;
-                writel(val, gp->regs + PCS_CFG);
-
-                /* Make sure serialink loopback is off.  The meaning
-                 * of this bit is logically inverted based upon whether
-                 * you are in Serialink or SERDES mode.
-                 */
-                val = readl(gp->regs + PCS_SCTRL);
-                if (gp->phy_type == phy_serialink)
-                        val &= ~PCS_SCTRL_LOOP;
-                else
-                        val |= PCS_SCTRL_LOOP;
-                writel(val, gp->regs + PCS_SCTRL);
+                gem_pcs_reset(gp);
+                gem_pcs_reinit_adv(gp);
         }
 
         /* Default aneg parameters */
@@ -2680,6 +2697,21 @@ static int gem_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
                 cmd->speed = 0;
                 cmd->duplex = cmd->port = cmd->phy_address =
                         cmd->transceiver = cmd->autoneg = 0;
+
+                /* serdes means usually a Fibre connector, with most fixed */
+                if (gp->phy_type == phy_serdes) {
+                        cmd->port = PORT_FIBRE;
+                        cmd->supported = (SUPPORTED_1000baseT_Half |
+                                SUPPORTED_1000baseT_Full |
+                                SUPPORTED_FIBRE | SUPPORTED_Autoneg |
+                                SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+                        cmd->advertising = cmd->supported;
+                        cmd->transceiver = XCVR_INTERNAL;
+                        if (gp->lstate == link_up)
+                                cmd->speed = SPEED_1000;
+                        cmd->duplex = DUPLEX_FULL;
+                        cmd->autoneg = 1;
+                }
         }
         cmd->maxtxpkt = cmd->maxrxpkt = 0;
 
diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c
index bb7338863fb9..b59d4115d20f 100644
--- a/drivers/pcmcia/bfin_cf_pcmcia.c
+++ b/drivers/pcmcia/bfin_cf_pcmcia.c
@@ -334,6 +334,6 @@ static void __exit bfin_cf_exit(void)
 module_init(bfin_cf_init);
 module_exit(bfin_cf_exit);
 
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>")
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("BFIN CF/PCMCIA Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index d1812d32f47d..63f0de29aa14 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -827,7 +827,7 @@ static int __init maple_bus_init(void)
 
         maple_queue_cache =
             kmem_cache_create("maple_queue_cache", 0x400, 0,
-                              SLAB_POISON|SLAB_HWCACHE_ALIGN, NULL);
+                              SLAB_HWCACHE_ALIGN, NULL);
 
         if (!maple_queue_cache)
                 goto cleanup_bothirqs;
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index c95b286a1239..5d457c96bd7e 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -22,6 +22,8 @@ menuconfig STAGING
           If in doubt, say N here.
 
 
+if STAGING
+
 config STAGING_EXCLUDE_BUILD
         bool "Exclude Staging drivers from being built" if STAGING
         default y
@@ -62,3 +64,4 @@ source "drivers/staging/at76_usb/Kconfig"
 source "drivers/staging/poch/Kconfig"
 
 endif # !STAGING_EXCLUDE_BUILD
+endif # STAGING
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 8e74657f106c..43a863c5cc43 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -51,6 +51,7 @@ static struct usb_device_id usbtmc_devices[] = {
         { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), },
         { 0, } /* terminating entry */
 };
+MODULE_DEVICE_TABLE(usb, usbtmc_devices);
 
 /*
  * This structure is the capabilities for the device
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 3d7793d93031..8c081308b0e2 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -279,7 +279,9 @@ static int usb_unbind_interface(struct device *dev)
          * altsetting means creating new endpoint device entries).
          * When either of these happens, defer the Set-Interface.
          */
-        if (!error && intf->dev.power.status == DPM_ON)
+        if (intf->cur_altsetting->desc.bAlternateSetting == 0)
+                ;       /* Already in altsetting 0 so skip Set-Interface */
+        else if (!error && intf->dev.power.status == DPM_ON)
                 usb_set_interface(udev, intf->altsetting[0].
                                 desc.bInterfaceNumber, 0);
         else
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 428b5993575a..3a8bb53fc473 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -651,6 +651,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
                                 fs_in_desc.bEndpointAddress;
                 hs_out_desc.bEndpointAddress =
                                 fs_out_desc.bEndpointAddress;
+                hs_notify_desc.bEndpointAddress =
+                                fs_notify_desc.bEndpointAddress;
 
                 /* copy descriptors, and track endpoint copies */
                 f->hs_descriptors = usb_copy_descriptors(eth_hs_function);
@@ -662,6 +664,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
                                 f->hs_descriptors, &hs_in_desc);
                 rndis->hs.out = usb_find_endpoint(eth_hs_function,
                                 f->hs_descriptors, &hs_out_desc);
+                rndis->hs.notify = usb_find_endpoint(eth_hs_function,
+                                f->hs_descriptors, &hs_notify_desc);
         }
 
         rndis->port.open = rndis_open;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index aad1359a3eb1..fb6f2933b01b 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -143,6 +143,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -166,6 +167,7 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
         { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
         { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
         { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 07a3992abad2..373ee09975bb 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -40,6 +40,9 @@
 /* AlphaMicro Components AMC-232USB01 device */
 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
 
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
 /* the VID is the standard ftdi vid (FTDI_VID) */
 #define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
@@ -75,6 +78,9 @@
 /* OpenDCC (www.opendcc.de) product id */
 #define FTDI_OPENDCC_PID        0xBFD8
 
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II           0xF0C8
+
 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
 #define FTDI_XF_632_PID 0xFC08  /* 632: 16x2 Character Display */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 491c8857b644..1aed584be5eb 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -91,6 +91,8 @@ static struct usb_device_id id_table [] = {
         { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
         { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
         { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
+        { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
+        { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
         { }                                     /* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index a3bd039c78e9..54974f446a8c 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -110,3 +110,11 @@
 /* Y.C. Cable U.S.A., Inc - USB to RS-232 */
 #define YCCABLE_VENDOR_ID       0x05ad
 #define YCCABLE_PRODUCT_ID      0x0fba
+
+/* "Superial" USB - Serial */
+#define SUPERIAL_VENDOR_ID      0x5372
+#define SUPERIAL_PRODUCT_ID     0x2303
+
+/* Hewlett-Packard LD220-HP POS Pole Display */
+#define HP_VENDOR_ID            0x03f0
+#define HP_LD220_PRODUCT_ID     0x3524
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 31c42d1cae13..01d0c70d60e9 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -16,56 +16,6 @@
  * For questions or problems with this driver, contact Texas Instruments
  * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
  * Peter Berger <pberger@brimson.com>.
- *
- * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052
- * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device
- * configuration.
- *
- * #!/bin/bash
- *
- * BOOT_CONFIG=1
- * ACTIVE_CONFIG=2
- *
- * if [[ "$ACTION" != "add" ]]
- * then
- *      exit
- * fi
- *
- * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue
- *
- * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]]
- * then
- *      exit
- * fi
- *
- * PRODUCT=${PRODUCT%/?*}               # delete version
- * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}`
- * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}`
- *
- * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters
- *
- * function scan() {
- *      s=$1
- *      shift
- *      for i
- *      do
- *              if [[ $s -eq $i ]]
- *              then
- *                      return 0
- *              fi
- *      done
- *      return 1
- * }
- *
- * IFS=$IFS,
- *
- * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` &&
- * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) ||
- * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` &&
- * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`)
- * then
- *      echo $ACTIVE_CONFIG > $CONFIG_PATH
- * fi
  */
 
 #include <linux/kernel.h>
@@ -457,9 +407,10 @@ static int ti_startup(struct usb_serial *serial)
                 goto free_tdev;
         }
 
-        /* the second configuration must be set (in sysfs by hotplug script) */
+        /* the second configuration must be set */
         if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
-                status = -ENODEV;
+                status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
+                status = status ? status : -ENODEV;
                 goto free_tdev;
         }
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index e61f2bfc64ad..bfcc1fe82518 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -167,8 +167,22 @@ UNUSUAL_DEV(  0x0421, 0x005d, 0x0001, 0x0600,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_CAPACITY ),
 
+/* Reported by Ozan Sener <themgzzy@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x0060, 0x0551, 0x0551,
+                "Nokia",
+                "3500c",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_FIX_CAPACITY ),
+
+/* Reported by CSECSY Laszlo <boobaa@frugalware.org> */
+UNUSUAL_DEV(  0x0421, 0x0063, 0x0001, 0x0601,
+                "Nokia",
+                "Nokia 3109c",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_FIX_CAPACITY ),
+
 /* Patch for Nokia 5310 capacity */
-UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0591,
+UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0701,
                 "Nokia",
                 "5310",
                 US_SC_DEVICE, US_PR_DEVICE, NULL,