Merge branch 'linux-2.6' into next

8 files changed, 867 insertions, 2 deletions

diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index c4493091c655..a14d5b6e4c7c 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -52,5 +52,12 @@ config W1_MASTER_GPIO
           This support is also available as a module.  If so, the module
           will be called w1-gpio.ko.
 
+config HDQ_MASTER_OMAP
+        tristate "OMAP HDQ driver"
+        depends on ARCH_OMAP2430 || ARCH_OMAP34XX
+        help
+          Say Y here if you want support for the 1-wire or HDQ Interface
+          on an OMAP processor.
+
 endmenu
 
diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile
index 1420b5bbdda8..bc4714a75f3a 100644
--- a/drivers/w1/masters/Makefile
+++ b/drivers/w1/masters/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_W1_MASTER_DS2490)		+= ds2490.o
 obj-$(CONFIG_W1_MASTER_DS2482)          += ds2482.o
 obj-$(CONFIG_W1_MASTER_DS1WM)           += ds1wm.o
 obj-$(CONFIG_W1_MASTER_GPIO)            += w1-gpio.o
+obj-$(CONFIG_HDQ_MASTER_OMAP)           += omap_hdq.o
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
new file mode 100644
index 000000000000..1295625c4825
--- /dev/null
+++ b/drivers/w1/masters/omap_hdq.c
@@ -0,0 +1,725 @@
+/*
+ * drivers/w1/masters/omap_hdq.c
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+
+#define MOD_NAME        "OMAP_HDQ:"
+
+#define OMAP_HDQ_REVISION                       0x00
+#define OMAP_HDQ_TX_DATA                        0x04
+#define OMAP_HDQ_RX_DATA                        0x08
+#define OMAP_HDQ_CTRL_STATUS                    0x0c
+#define OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK      (1<<6)
+#define OMAP_HDQ_CTRL_STATUS_CLOCKENABLE        (1<<5)
+#define OMAP_HDQ_CTRL_STATUS_GO                 (1<<4)
+#define OMAP_HDQ_CTRL_STATUS_INITIALIZATION     (1<<2)
+#define OMAP_HDQ_CTRL_STATUS_DIR                (1<<1)
+#define OMAP_HDQ_CTRL_STATUS_MODE               (1<<0)
+#define OMAP_HDQ_INT_STATUS                     0x10
+#define OMAP_HDQ_INT_STATUS_TXCOMPLETE          (1<<2)
+#define OMAP_HDQ_INT_STATUS_RXCOMPLETE          (1<<1)
+#define OMAP_HDQ_INT_STATUS_TIMEOUT             (1<<0)
+#define OMAP_HDQ_SYSCONFIG                      0x14
+#define OMAP_HDQ_SYSCONFIG_SOFTRESET            (1<<1)
+#define OMAP_HDQ_SYSCONFIG_AUTOIDLE             (1<<0)
+#define OMAP_HDQ_SYSSTATUS                      0x18
+#define OMAP_HDQ_SYSSTATUS_RESETDONE            (1<<0)
+
+#define OMAP_HDQ_FLAG_CLEAR                     0
+#define OMAP_HDQ_FLAG_SET                       1
+#define OMAP_HDQ_TIMEOUT                        (HZ/5)
+
+#define OMAP_HDQ_MAX_USER                       4
+
+static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue);
+static int w1_id;
+
+struct hdq_data {
+        struct device           *dev;
+        void __iomem            *hdq_base;
+        /* lock status update */
+        struct  mutex           hdq_mutex;
+        int                     hdq_usecount;
+        struct  clk             *hdq_ick;
+        struct  clk             *hdq_fck;
+        u8                      hdq_irqstatus;
+        /* device lock */
+        spinlock_t              hdq_spinlock;
+        /*
+         * Used to control the call to omap_hdq_get and omap_hdq_put.
+         * HDQ Protocol: Write the CMD|REG_address first, followed by
+         * the data wrire or read.
+         */
+        int                     init_trans;
+};
+
+static int __init omap_hdq_probe(struct platform_device *pdev);
+static int omap_hdq_remove(struct platform_device *pdev);
+
+static struct platform_driver omap_hdq_driver = {
+        .probe =        omap_hdq_probe,
+        .remove =       omap_hdq_remove,
+        .driver =       {
+                .name = "omap_hdq",
+        },
+};
+
+static u8 omap_w1_read_byte(void *_hdq);
+static void omap_w1_write_byte(void *_hdq, u8 byte);
+static u8 omap_w1_reset_bus(void *_hdq);
+static void omap_w1_search_bus(void *_hdq, u8 search_type,
+        w1_slave_found_callback slave_found);
+
+
+static struct w1_bus_master omap_w1_master = {
+        .read_byte      = omap_w1_read_byte,
+        .write_byte     = omap_w1_write_byte,
+        .reset_bus      = omap_w1_reset_bus,
+        .search         = omap_w1_search_bus,
+};
+
+/* HDQ register I/O routines */
+static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset)
+{
+        return __raw_readb(hdq_data->hdq_base + offset);
+}
+
+static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val)
+{
+        __raw_writeb(val, hdq_data->hdq_base + offset);
+}
+
+static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset,
+                        u8 val, u8 mask)
+{
+        u8 new_val = (__raw_readb(hdq_data->hdq_base + offset) & ~mask)
+                        | (val & mask);
+        __raw_writeb(new_val, hdq_data->hdq_base + offset);
+
+        return new_val;
+}
+
+/*
+ * Wait for one or more bits in flag change.
+ * HDQ_FLAG_SET: wait until any bit in the flag is set.
+ * HDQ_FLAG_CLEAR: wait until all bits in the flag are cleared.
+ * return 0 on success and -ETIMEDOUT in the case of timeout.
+ */
+static int hdq_wait_for_flag(struct hdq_data *hdq_data, u32 offset,
+                u8 flag, u8 flag_set, u8 *status)
+{
+        int ret = 0;
+        unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT;
+
+        if (flag_set == OMAP_HDQ_FLAG_CLEAR) {
+                /* wait for the flag clear */
+                while (((*status = hdq_reg_in(hdq_data, offset)) & flag)
+                        && time_before(jiffies, timeout)) {
+                        schedule_timeout_uninterruptible(1);
+                }
+                if (*status & flag)
+                        ret = -ETIMEDOUT;
+        } else if (flag_set == OMAP_HDQ_FLAG_SET) {
+                /* wait for the flag set */
+                while (!((*status = hdq_reg_in(hdq_data, offset)) & flag)
+                        && time_before(jiffies, timeout)) {
+                        schedule_timeout_uninterruptible(1);
+                }
+                if (!(*status & flag))
+                        ret = -ETIMEDOUT;
+        } else
+                return -EINVAL;
+
+        return ret;
+}
+
+/* write out a byte and fill *status with HDQ_INT_STATUS */
+static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status)
+{
+        int ret;
+        u8 tmp_status;
+        unsigned long irqflags;
+
+        *status = 0;
+
+        spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+        /* clear interrupt flags via a dummy read */
+        hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+        /* ISR loads it with new INT_STATUS */
+        hdq_data->hdq_irqstatus = 0;
+        spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+
+        hdq_reg_out(hdq_data, OMAP_HDQ_TX_DATA, val);
+
+        /* set the GO bit */
+        hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_GO,
+                OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO);
+        /* wait for the TXCOMPLETE bit */
+        ret = wait_event_timeout(hdq_wait_queue,
+                hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT);
+        if (ret == 0) {
+                dev_dbg(hdq_data->dev, "TX wait elapsed\n");
+                goto out;
+        }
+
+        *status = hdq_data->hdq_irqstatus;
+        /* check irqstatus */
+        if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) {
+                dev_dbg(hdq_data->dev, "timeout waiting for"
+                        "TXCOMPLETE/RXCOMPLETE, %x", *status);
+                ret = -ETIMEDOUT;
+                goto out;
+        }
+
+        /* wait for the GO bit return to zero */
+        ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                        OMAP_HDQ_CTRL_STATUS_GO,
+                        OMAP_HDQ_FLAG_CLEAR, &tmp_status);
+        if (ret) {
+                dev_dbg(hdq_data->dev, "timeout waiting GO bit"
+                        "return to zero, %x", tmp_status);
+        }
+
+out:
+        return ret;
+}
+
+/* HDQ Interrupt service routine */
+static irqreturn_t hdq_isr(int irq, void *_hdq)
+{
+        struct hdq_data *hdq_data = _hdq;
+        unsigned long irqflags;
+
+        spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+        hdq_data->hdq_irqstatus = hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+        spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+        dev_dbg(hdq_data->dev, "hdq_isr: %x", hdq_data->hdq_irqstatus);
+
+        if (hdq_data->hdq_irqstatus &
+                (OMAP_HDQ_INT_STATUS_TXCOMPLETE | OMAP_HDQ_INT_STATUS_RXCOMPLETE
+                | OMAP_HDQ_INT_STATUS_TIMEOUT)) {
+                /* wake up sleeping process */
+                wake_up(&hdq_wait_queue);
+        }
+
+        return IRQ_HANDLED;
+}
+
+/* HDQ Mode: always return success */
+static u8 omap_w1_reset_bus(void *_hdq)
+{
+        return 0;
+}
+
+/* W1 search callback function */
+static void omap_w1_search_bus(void *_hdq, u8 search_type,
+        w1_slave_found_callback slave_found)
+{
+        u64 module_id, rn_le, cs, id;
+
+        if (w1_id)
+                module_id = w1_id;
+        else
+                module_id = 0x1;
+
+        rn_le = cpu_to_le64(module_id);
+        /*
+         * HDQ might not obey truly the 1-wire spec.
+         * So calculate CRC based on module parameter.
+         */
+        cs = w1_calc_crc8((u8 *)&rn_le, 7);
+        id = (cs << 56) | module_id;
+
+        slave_found(_hdq, id);
+}
+
+static int _omap_hdq_reset(struct hdq_data *hdq_data)
+{
+        int ret;
+        u8 tmp_status;
+
+        hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, OMAP_HDQ_SYSCONFIG_SOFTRESET);
+        /*
+         * Select HDQ mode & enable clocks.
+         * It is observed that INT flags can't be cleared via a read and GO/INIT
+         * won't return to zero if interrupt is disabled. So we always enable
+         * interrupt.
+         */
+        hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+                OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
+
+        /* wait for reset to complete */
+        ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_SYSSTATUS,
+                OMAP_HDQ_SYSSTATUS_RESETDONE, OMAP_HDQ_FLAG_SET, &tmp_status);
+        if (ret)
+                dev_dbg(hdq_data->dev, "timeout waiting HDQ reset, %x",
+                                tmp_status);
+        else {
+                hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                        OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+                        OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
+                hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
+                        OMAP_HDQ_SYSCONFIG_AUTOIDLE);
+        }
+
+        return ret;
+}
+
+/* Issue break pulse to the device */
+static int omap_hdq_break(struct hdq_data *hdq_data)
+{
+        int ret = 0;
+        u8 tmp_status;
+        unsigned long irqflags;
+
+        ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+        if (ret < 0) {
+                dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+                ret = -EINTR;
+                goto rtn;
+        }
+
+        spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+        /* clear interrupt flags via a dummy read */
+        hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+        /* ISR loads it with new INT_STATUS */
+        hdq_data->hdq_irqstatus = 0;
+        spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+
+        /* set the INIT and GO bit */
+        hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO,
+                OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_INITIALIZATION |
+                OMAP_HDQ_CTRL_STATUS_GO);
+
+        /* wait for the TIMEOUT bit */
+        ret = wait_event_timeout(hdq_wait_queue,
+                hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT);
+        if (ret == 0) {
+                dev_dbg(hdq_data->dev, "break wait elapsed\n");
+                ret = -EINTR;
+                goto out;
+        }
+
+        tmp_status = hdq_data->hdq_irqstatus;
+        /* check irqstatus */
+        if (!(tmp_status & OMAP_HDQ_INT_STATUS_TIMEOUT)) {
+                dev_dbg(hdq_data->dev, "timeout waiting for TIMEOUT, %x",
+                                tmp_status);
+                ret = -ETIMEDOUT;
+                goto out;
+        }
+        /*
+         * wait for both INIT and GO bits rerurn to zero.
+         * zero wait time expected for interrupt mode.
+         */
+        ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                        OMAP_HDQ_CTRL_STATUS_INITIALIZATION |
+                        OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_FLAG_CLEAR,
+                        &tmp_status);
+        if (ret)
+                dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits"
+                        "return to zero, %x", tmp_status);
+
+out:
+        mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+        return ret;
+}
+
+static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
+{
+        int ret = 0;
+        u8 status;
+        unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT;
+
+        ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+        if (ret < 0) {
+                ret = -EINTR;
+                goto rtn;
+        }
+
+        if (!hdq_data->hdq_usecount) {
+                ret = -EINVAL;
+                goto out;
+        }
+
+        if (!(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) {
+                hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                        OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO,
+                        OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO);
+                /*
+                 * The RX comes immediately after TX. It
+                 * triggers another interrupt before we
+                 * sleep. So we have to wait for RXCOMPLETE bit.
+                 */
+                while (!(hdq_data->hdq_irqstatus
+                        & OMAP_HDQ_INT_STATUS_RXCOMPLETE)
+                        && time_before(jiffies, timeout)) {
+                        schedule_timeout_uninterruptible(1);
+                }
+                hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0,
+                        OMAP_HDQ_CTRL_STATUS_DIR);
+                status = hdq_data->hdq_irqstatus;
+                /* check irqstatus */
+                if (!(status & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) {
+                        dev_dbg(hdq_data->dev, "timeout waiting for"
+                                "RXCOMPLETE, %x", status);
+                        ret = -ETIMEDOUT;
+                        goto out;
+                }
+        }
+        /* the data is ready. Read it in! */
+        *val = hdq_reg_in(hdq_data, OMAP_HDQ_RX_DATA);
+out:
+        mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+        return 0;
+
+}
+
+/* Enable clocks and set the controller to HDQ mode */
+static int omap_hdq_get(struct hdq_data *hdq_data)
+{
+        int ret = 0;
+
+        ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+        if (ret < 0) {
+                ret = -EINTR;
+                goto rtn;
+        }
+
+        if (OMAP_HDQ_MAX_USER == hdq_data->hdq_usecount) {
+                dev_dbg(hdq_data->dev, "attempt to exceed the max use count");
+                ret = -EINVAL;
+                goto out;
+        } else {
+                hdq_data->hdq_usecount++;
+                try_module_get(THIS_MODULE);
+                if (1 == hdq_data->hdq_usecount) {
+                        if (clk_enable(hdq_data->hdq_ick)) {
+                                dev_dbg(hdq_data->dev, "Can not enable ick\n");
+                                ret = -ENODEV;
+                                goto clk_err;
+                        }
+                        if (clk_enable(hdq_data->hdq_fck)) {
+                                dev_dbg(hdq_data->dev, "Can not enable fck\n");
+                                clk_disable(hdq_data->hdq_ick);
+                                ret = -ENODEV;
+                                goto clk_err;
+                        }
+
+                        /* make sure HDQ is out of reset */
+                        if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) &
+                                OMAP_HDQ_SYSSTATUS_RESETDONE)) {
+                                ret = _omap_hdq_reset(hdq_data);
+                                if (ret)
+                                        /* back up the count */
+                                        hdq_data->hdq_usecount--;
+                        } else {
+                                /* select HDQ mode & enable clocks */
+                                hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+                                        OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+                                        OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
+                                hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
+                                        OMAP_HDQ_SYSCONFIG_AUTOIDLE);
+                                hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+                        }
+                }
+        }
+
+clk_err:
+        clk_put(hdq_data->hdq_ick);
+        clk_put(hdq_data->hdq_fck);
+out:
+        mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+        return ret;
+}
+
+/* Disable clocks to the module */
+static int omap_hdq_put(struct hdq_data *hdq_data)
+{
+        int ret = 0;
+
+        ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+        if (ret < 0)
+                return -EINTR;
+
+        if (0 == hdq_data->hdq_usecount) {
+                dev_dbg(hdq_data->dev, "attempt to decrement use count"
+                        "when it is zero");
+                ret = -EINVAL;
+        } else {
+                hdq_data->hdq_usecount--;
+                module_put(THIS_MODULE);
+                if (0 == hdq_data->hdq_usecount) {
+                        clk_disable(hdq_data->hdq_ick);
+                        clk_disable(hdq_data->hdq_fck);
+                }
+        }
+        mutex_unlock(&hdq_data->hdq_mutex);
+
+        return ret;
+}
+
+/* Read a byte of data from the device */
+static u8 omap_w1_read_byte(void *_hdq)
+{
+        struct hdq_data *hdq_data = _hdq;
+        u8 val = 0;
+        int ret;
+
+        ret = hdq_read_byte(hdq_data, &val);
+        if (ret) {
+                ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+                if (ret < 0) {
+                        dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+                        return -EINTR;
+                }
+                hdq_data->init_trans = 0;
+                mutex_unlock(&hdq_data->hdq_mutex);
+                omap_hdq_put(hdq_data);
+                return -1;
+        }
+
+        /* Write followed by a read, release the module */
+        if (hdq_data->init_trans) {
+                ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+                if (ret < 0) {
+                        dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+                        return -EINTR;
+                }
+                hdq_data->init_trans = 0;
+                mutex_unlock(&hdq_data->hdq_mutex);
+                omap_hdq_put(hdq_data);
+        }
+
+        return val;
+}
+
+/* Write a byte of data to the device */
+static void omap_w1_write_byte(void *_hdq, u8 byte)
+{
+        struct hdq_data *hdq_data = _hdq;
+        int ret;
+        u8 status;
+
+        /* First write to initialize the transfer */
+        if (hdq_data->init_trans == 0)
+                omap_hdq_get(hdq_data);
+
+        ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+        if (ret < 0) {
+                dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+                return;
+        }
+        hdq_data->init_trans++;
+        mutex_unlock(&hdq_data->hdq_mutex);
+
+        ret = hdq_write_byte(hdq_data, byte, &status);
+        if (ret == 0) {
+                dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status);
+                return;
+        }
+
+        /* Second write, data transfered. Release the module */
+        if (hdq_data->init_trans > 1) {
+                omap_hdq_put(hdq_data);
+                ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+                if (ret < 0) {
+                        dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+                        return;
+                }
+                hdq_data->init_trans = 0;
+                mutex_unlock(&hdq_data->hdq_mutex);
+        }
+
+        return;
+}
+
+static int __init omap_hdq_probe(struct platform_device *pdev)
+{
+        struct hdq_data *hdq_data;
+        struct resource *res;
+        int ret, irq;
+        u8 rev;
+
+        hdq_data = kmalloc(sizeof(*hdq_data), GFP_KERNEL);
+        if (!hdq_data) {
+                dev_dbg(&pdev->dev, "unable to allocate memory\n");
+                ret = -ENOMEM;
+                goto err_kmalloc;
+        }
+
+        hdq_data->dev = &pdev->dev;
+        platform_set_drvdata(pdev, hdq_data);
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res) {
+                dev_dbg(&pdev->dev, "unable to get resource\n");
+                ret = -ENXIO;
+                goto err_resource;
+        }
+
+        hdq_data->hdq_base = ioremap(res->start, SZ_4K);
+        if (!hdq_data->hdq_base) {
+                dev_dbg(&pdev->dev, "ioremap failed\n");
+                ret = -EINVAL;
+                goto err_ioremap;
+        }
+
+        /* get interface & functional clock objects */
+        hdq_data->hdq_ick = clk_get(&pdev->dev, "hdq_ick");
+        hdq_data->hdq_fck = clk_get(&pdev->dev, "hdq_fck");
+
+        if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) {
+                dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n");
+                if (IS_ERR(hdq_data->hdq_ick)) {
+                        ret = PTR_ERR(hdq_data->hdq_ick);
+                        goto err_clk;
+                }
+                if (IS_ERR(hdq_data->hdq_fck)) {
+                        ret = PTR_ERR(hdq_data->hdq_fck);
+                        clk_put(hdq_data->hdq_ick);
+                        goto err_clk;
+                }
+        }
+
+        hdq_data->hdq_usecount = 0;
+        mutex_init(&hdq_data->hdq_mutex);
+
+        if (clk_enable(hdq_data->hdq_ick)) {
+                dev_dbg(&pdev->dev, "Can not enable ick\n");
+                ret = -ENODEV;
+                goto err_intfclk;
+        }
+
+        if (clk_enable(hdq_data->hdq_fck)) {
+                dev_dbg(&pdev->dev, "Can not enable fck\n");
+                ret = -ENODEV;
+                goto err_fnclk;
+        }
+
+        rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION);
+        dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n",
+                (rev >> 4) + '0', (rev & 0x0f) + '0', "Interrupt");
+
+        spin_lock_init(&hdq_data->hdq_spinlock);
+
+        irq = platform_get_irq(pdev, 0);
+        if (irq < 0) {
+                ret = -ENXIO;
+                goto err_irq;
+        }
+
+        ret = request_irq(irq, hdq_isr, IRQF_DISABLED, "omap_hdq", hdq_data);
+        if (ret < 0) {
+                dev_dbg(&pdev->dev, "could not request irq\n");
+                goto err_irq;
+        }
+
+        omap_hdq_break(hdq_data);
+
+        /* don't clock the HDQ until it is needed */
+        clk_disable(hdq_data->hdq_ick);
+        clk_disable(hdq_data->hdq_fck);
+
+        omap_w1_master.data = hdq_data;
+
+        ret = w1_add_master_device(&omap_w1_master);
+        if (ret) {
+                dev_dbg(&pdev->dev, "Failure in registering w1 master\n");
+                goto err_w1;
+        }
+
+        return 0;
+
+err_w1:
+err_irq:
+        clk_disable(hdq_data->hdq_fck);
+
+err_fnclk:
+        clk_disable(hdq_data->hdq_ick);
+
+err_intfclk:
+        clk_put(hdq_data->hdq_ick);
+        clk_put(hdq_data->hdq_fck);
+
+err_clk:
+        iounmap(hdq_data->hdq_base);
+
+err_ioremap:
+err_resource:
+        platform_set_drvdata(pdev, NULL);
+        kfree(hdq_data);
+
+err_kmalloc:
+        return ret;
+
+}
+
+static int omap_hdq_remove(struct platform_device *pdev)
+{
+        struct hdq_data *hdq_data = platform_get_drvdata(pdev);
+
+        mutex_lock(&hdq_data->hdq_mutex);
+
+        if (hdq_data->hdq_usecount) {
+                dev_dbg(&pdev->dev, "removed when use count is not zero\n");
+                return -EBUSY;
+        }
+
+        mutex_unlock(&hdq_data->hdq_mutex);
+
+        /* remove module dependency */
+        clk_put(hdq_data->hdq_ick);
+        clk_put(hdq_data->hdq_fck);
+        free_irq(INT_24XX_HDQ_IRQ, hdq_data);
+        platform_set_drvdata(pdev, NULL);
+        iounmap(hdq_data->hdq_base);
+        kfree(hdq_data);
+
+        return 0;
+}
+
+static int __init
+omap_hdq_init(void)
+{
+        return platform_driver_register(&omap_hdq_driver);
+}
+module_init(omap_hdq_init);
+
+static void __exit
+omap_hdq_exit(void)
+{
+        platform_driver_unregister(&omap_hdq_driver);
+}
+module_exit(omap_hdq_exit);
+
+module_param(w1_id, int, S_IRUSR);
+MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection");
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("HDQ driver Library");
+MODULE_LICENSE("GPL");
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index 3df29a122f84..8d0b1fb1e52e 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -44,4 +44,11 @@ config W1_SLAVE_DS2760
 
           If you are unsure, say N.
 
+config W1_SLAVE_BQ27000
+        tristate "BQ27000 slave support"
+        depends on W1
+        help
+          Say Y here if you want to use a hdq
+          bq27000 slave support.
+
 endmenu
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index a8eb7524df1d..990f400b6d22 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -6,4 +6,4 @@ obj-$(CONFIG_W1_SLAVE_THERM)	+= w1_therm.o
 obj-$(CONFIG_W1_SLAVE_SMEM)     += w1_smem.o
 obj-$(CONFIG_W1_SLAVE_DS2433)   += w1_ds2433.o
 obj-$(CONFIG_W1_SLAVE_DS2760)   += w1_ds2760.o
-
+obj-$(CONFIG_W1_SLAVE_BQ27000)  += w1_bq27000.o
diff --git a/drivers/w1/slaves/w1_bq27000.c b/drivers/w1/slaves/w1_bq27000.c
new file mode 100644
index 000000000000..8f4c91f6c680
--- /dev/null
+++ b/drivers/w1/slaves/w1_bq27000.c
@@ -0,0 +1,123 @@
+/*
+ * drivers/w1/slaves/w1_bq27000.c
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_family.h"
+
+#define HDQ_CMD_READ    (0)
+#define HDQ_CMD_WRITE   (1<<7)
+
+static int F_ID;
+
+void w1_bq27000_write(struct device *dev, u8 buf, u8 reg)
+{
+        struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+        if (!dev) {
+                pr_info("Could not obtain slave dev ptr\n");
+                return;
+        }
+
+        w1_write_8(sl->master, HDQ_CMD_WRITE | reg);
+        w1_write_8(sl->master, buf);
+}
+EXPORT_SYMBOL(w1_bq27000_write);
+
+int w1_bq27000_read(struct device *dev, u8 reg)
+{
+        u8 val;
+        struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+        if (!dev)
+                return 0;
+
+        w1_write_8(sl->master, HDQ_CMD_READ | reg);
+        val = w1_read_8(sl->master);
+
+        return val;
+}
+EXPORT_SYMBOL(w1_bq27000_read);
+
+static int w1_bq27000_add_slave(struct w1_slave *sl)
+{
+        int ret;
+        int id = 1;
+        struct platform_device *pdev;
+
+        pdev = platform_device_alloc("bq27000-battery", id);
+        if (!pdev) {
+                ret = -ENOMEM;
+                return ret;
+        }
+        pdev->dev.parent = &sl->dev;
+
+        ret = platform_device_add(pdev);
+        if (ret)
+                goto pdev_add_failed;
+
+        dev_set_drvdata(&sl->dev, pdev);
+
+        goto success;
+
+pdev_add_failed:
+        platform_device_unregister(pdev);
+success:
+        return ret;
+}
+
+static void w1_bq27000_remove_slave(struct w1_slave *sl)
+{
+        struct platform_device *pdev = dev_get_drvdata(&sl->dev);
+
+        platform_device_unregister(pdev);
+}
+
+static struct w1_family_ops w1_bq27000_fops = {
+        .add_slave      = w1_bq27000_add_slave,
+        .remove_slave   = w1_bq27000_remove_slave,
+};
+
+static struct w1_family w1_bq27000_family = {
+        .fid = 1,
+        .fops = &w1_bq27000_fops,
+};
+
+static int __init w1_bq27000_init(void)
+{
+        if (F_ID)
+                w1_bq27000_family.fid = F_ID;
+
+        return w1_register_family(&w1_bq27000_family);
+}
+
+static void __exit w1_bq27000_exit(void)
+{
+        w1_unregister_family(&w1_bq27000_family);
+}
+
+
+module_init(w1_bq27000_init);
+module_exit(w1_bq27000_exit);
+
+module_param(F_ID, int, S_IRUSR);
+MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ device");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments Ltd");
+MODULE_DESCRIPTION("HDQ/1-wire slave driver bq27000 battery monitor chip");
diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h
index cdaa6fffbfc7..97304bd83ec9 100644
--- a/drivers/w1/w1.h
+++ b/drivers/w1/w1.h
@@ -206,6 +206,7 @@ void w1_slave_detach(struct w1_slave *sl);
 
 u8 w1_triplet(struct w1_master *dev, int bdir);
 void w1_write_8(struct w1_master *, u8);
+u8 w1_read_8(struct w1_master *);
 int w1_reset_bus(struct w1_master *);
 u8 w1_calc_crc8(u8 *, int);
 void w1_write_block(struct w1_master *, const u8 *, int);
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index f4f82f1f486e..0d15b0eaf79a 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -217,7 +217,7 @@ u8 w1_triplet(struct w1_master *dev, int bdir)
  * @param dev     the master device
  * @return        the byte read
  */
-static u8 w1_read_8(struct w1_master * dev)
+u8 w1_read_8(struct w1_master *dev)
 {
         int i;
         u8 res = 0;
@@ -230,6 +230,7 @@ static u8 w1_read_8(struct w1_master * dev)
 
         return res;
 }
+EXPORT_SYMBOL_GPL(w1_read_8);
 
 /**
  * Writes a series of bytes.