viafb: move some include files to include/linux

These are the files which should be available to subdevices compiled
outside of drivers/video/via.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

15 files changed, 21 insertions, 295 deletions

diff --git a/drivers/video/via/accel.c b/drivers/video/via/accel.c
index 189aba41f9b9..e44893ea590d 100644
--- a/drivers/video/via/accel.c
+++ b/drivers/video/via/accel.c
@@ -18,7 +18,7 @@
  * Foundation, Inc.,
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
-#include "via-core.h"
+#include <linux/via-core.h>
 #include "global.h"
 
 /*
diff --git a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c
index 6271b7696323..39b040bb3817 100644
--- a/drivers/video/via/dvi.c
+++ b/drivers/video/via/dvi.c
@@ -18,8 +18,8 @@
  * Foundation, Inc.,
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
-#include "via-core.h"
-#include "via_i2c.h"
+#include <linux/via-core.h>
+#include <linux/via_i2c.h>
 #include "global.h"
 
 static void tmds_register_write(int index, u8 data);
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index e356fe8d8a90..b996803ae2c1 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -18,7 +18,8 @@
  * Foundation, Inc.,
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
-#include "via-core.h"
+
+#include <linux/via-core.h>
 #include "global.h"
 
 static struct pll_map pll_value[] = {
diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 04eec31aa9a2..2ab0f156439a 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -18,8 +18,8 @@
  * Foundation, Inc.,
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
-#include "via-core.h"
-#include "via_i2c.h"
+#include <linux/via-core.h>
+#include <linux/via_i2c.h>
 #include "global.h"
 #include "lcdtbl.h"
 
diff --git a/drivers/video/via/via-core.c b/drivers/video/via/via-core.c
index 188c0022dcb4..e8cfe8392110 100644
--- a/drivers/video/via/via-core.c
+++ b/drivers/video/via/via-core.c
@@ -7,9 +7,9 @@
 /*
  * Core code for the Via multifunction framebuffer device.
  */
-#include "via-core.h"
-#include "via_i2c.h"
-#include "via-gpio.h"
+#include <linux/via-core.h>
+#include <linux/via_i2c.h>
+#include <linux/via-gpio.h>
 #include "global.h"
 
 #include <linux/module.h>
diff --git a/drivers/video/via/via-core.h b/drivers/video/via/via-core.h
deleted file mode 100644
index 7ffb521e1a7a..000000000000
--- a/drivers/video/via/via-core.h
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
- * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
- * Copyright 2009-2010 Jonathan Corbet <corbet@lwn.net>
- * Copyright 2010 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation;
- * either version 2, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
- * the implied warranty of MERCHANTABILITY or FITNESS FOR
- * A PARTICULAR PURPOSE.See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __VIA_CORE_H__
-#define __VIA_CORE_H__
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/pci.h>
-
-/*
- * A description of each known serial I2C/GPIO port.
- */
-enum via_port_type {
-        VIA_PORT_NONE = 0,
-        VIA_PORT_I2C,
-        VIA_PORT_GPIO,
-};
-
-enum via_port_mode {
-        VIA_MODE_OFF = 0,
-        VIA_MODE_I2C,           /* Used as I2C port */
-        VIA_MODE_GPIO,  /* Two GPIO ports */
-};
-
-enum viafb_i2c_adap {
-        VIA_PORT_26 = 0,
-        VIA_PORT_31,
-        VIA_PORT_25,
-        VIA_PORT_2C,
-        VIA_PORT_3D,
-};
-#define VIAFB_NUM_PORTS 5
-
-struct via_port_cfg {
-        enum via_port_type      type;
-        enum via_port_mode      mode;
-        u16                     io_port;
-        u8                      ioport_index;
-};
-
-/*
- * This is the global viafb "device" containing stuff needed by
- * all subdevs.
- */
-struct viafb_dev {
-        struct pci_dev *pdev;
-        int chip_type;
-        struct via_port_cfg *port_cfg;
-        /*
-         * Spinlock for access to device registers.  Not yet
-         * globally used.
-         */
-        spinlock_t reg_lock;
-        /*
-         * The framebuffer MMIO region.  Little, if anything, touches
-         * this memory directly, and certainly nothing outside of the
-         * framebuffer device itself.  We *do* have to be able to allocate
-         * chunks of this memory for other devices, though.
-         */
-        unsigned long fbmem_start;
-        long fbmem_len;
-        void __iomem *fbmem;
-#if defined(CONFIG_FB_VIA_CAMERA) || defined(CONFIG_FB_VIA_CAMERA_MODULE)
-        long camera_fbmem_offset;
-        long camera_fbmem_size;
-#endif
-        /*
-         * The MMIO region for device registers.
-         */
-        unsigned long engine_start;
-        unsigned long engine_len;
-        void __iomem *engine_mmio;
-
-};
-
-/*
- * Interrupt management.
- */
-
-void viafb_irq_enable(u32 mask);
-void viafb_irq_disable(u32 mask);
-
-/*
- * The global interrupt control register and its bits.
- */
-#define VDE_INTERRUPT   0x200   /* Video interrupt flags/masks */
-#define   VDE_I_DVISENSE  0x00000001  /* DVI sense int status */
-#define   VDE_I_VBLANK    0x00000002  /* Vertical blank status */
-#define   VDE_I_MCCFI     0x00000004  /* MCE compl. frame int status */
-#define   VDE_I_VSYNC     0x00000008  /* VGA VSYNC int status */
-#define   VDE_I_DMA0DDONE 0x00000010  /* DMA 0 descr done */
-#define   VDE_I_DMA0TDONE 0x00000020  /* DMA 0 transfer done */
-#define   VDE_I_DMA1DDONE 0x00000040  /* DMA 1 descr done */
-#define   VDE_I_DMA1TDONE 0x00000080  /* DMA 1 transfer done */
-#define   VDE_I_C1AV      0x00000100  /* Cap Eng 1 act vid end */
-#define   VDE_I_HQV0      0x00000200  /* First HQV engine */
-#define   VDE_I_HQV1      0x00000400  /* Second HQV engine */
-#define   VDE_I_HQV1EN    0x00000800  /* Second HQV engine enable */
-#define   VDE_I_C0AV      0x00001000  /* Cap Eng 0 act vid end */
-#define   VDE_I_C0VBI     0x00002000  /* Cap Eng 0 VBI end */
-#define   VDE_I_C1VBI     0x00004000  /* Cap Eng 1 VBI end */
-#define   VDE_I_VSYNC2    0x00008000  /* Sec. Disp. VSYNC */
-#define   VDE_I_DVISNSEN  0x00010000  /* DVI sense enable */
-#define   VDE_I_VSYNC2EN  0x00020000  /* Sec Disp VSYNC enable */
-#define   VDE_I_MCCFIEN   0x00040000  /* MC comp frame int mask enable */
-#define   VDE_I_VSYNCEN   0x00080000  /* VSYNC enable */
-#define   VDE_I_DMA0DDEN  0x00100000  /* DMA 0 descr done enable */
-#define   VDE_I_DMA0TDEN  0x00200000  /* DMA 0 trans done enable */
-#define   VDE_I_DMA1DDEN  0x00400000  /* DMA 1 descr done enable */
-#define   VDE_I_DMA1TDEN  0x00800000  /* DMA 1 trans done enable */
-#define   VDE_I_C1AVEN    0x01000000  /* cap 1 act vid end enable */
-#define   VDE_I_HQV0EN    0x02000000  /* First hqv engine enable */
-#define   VDE_I_C1VBIEN   0x04000000  /* Cap 1 VBI end enable */
-#define   VDE_I_LVDSSI    0x08000000  /* LVDS sense interrupt */
-#define   VDE_I_C0AVEN    0x10000000  /* Cap 0 act vid end enable */
-#define   VDE_I_C0VBIEN   0x20000000  /* Cap 0 VBI end enable */
-#define   VDE_I_LVDSSIEN  0x40000000  /* LVDS Sense enable */
-#define   VDE_I_ENABLE    0x80000000  /* Global interrupt enable */
-
-/*
- * DMA management.
- */
-int viafb_request_dma(void);
-void viafb_release_dma(void);
-/* void viafb_dma_copy_out(unsigned int offset, dma_addr_t paddr, int len); */
-int viafb_dma_copy_out_sg(unsigned int offset, struct scatterlist *sg, int nsg);
-
-/*
- * DMA Controller registers.
- */
-#define VDMA_MR0        0xe00           /* Mod reg 0 */
-#define   VDMA_MR_CHAIN   0x01          /* Chaining mode */
-#define   VDMA_MR_TDIE    0x02          /* Transfer done int enable */
-#define VDMA_CSR0       0xe04           /* Control/status */
-#define   VDMA_C_ENABLE   0x01            /* DMA Enable */
-#define   VDMA_C_START    0x02            /* Start a transfer */
-#define   VDMA_C_ABORT    0x04            /* Abort a transfer */
-#define   VDMA_C_DONE     0x08            /* Transfer is done */
-#define VDMA_MARL0      0xe20           /* Mem addr low */
-#define VDMA_MARH0      0xe24           /* Mem addr high */
-#define VDMA_DAR0       0xe28           /* Device address */
-#define VDMA_DQWCR0     0xe2c           /* Count (16-byte) */
-#define VDMA_TMR0       0xe30           /* Tile mode reg */
-#define VDMA_DPRL0      0xe34           /* Not sure */
-#define   VDMA_DPR_IN     0x08          /* Inbound transfer to FB */
-#define VDMA_DPRH0      0xe38
-#define VDMA_PMR0       (0xe00 + 0x134) /* Pitch mode */
-
-/*
- * Useful stuff that probably belongs somewhere global.
- */
-#define VGA_WIDTH       640
-#define VGA_HEIGHT      480
-
-/*
- * Indexed port operations.  Note that these are all multi-op
- * functions; every invocation will be racy if you're not holding
- * reg_lock.
- */
-
-#define VIAStatus   0x3DA  /* Non-indexed port */
-#define VIACR       0x3D4
-#define VIASR       0x3C4
-#define VIAGR       0x3CE
-#define VIAAR       0x3C0
-
-static inline u8 via_read_reg(u16 port, u8 index)
-{
-        outb(index, port);
-        return inb(port + 1);
-}
-
-static inline void via_write_reg(u16 port, u8 index, u8 data)
-{
-        outb(index, port);
-        outb(data, port + 1);
-}
-
-static inline void via_write_reg_mask(u16 port, u8 index, u8 data, u8 mask)
-{
-        u8 old;
-
-        outb(index, port);
-        old = inb(port + 1);
-        outb((data & mask) | (old & ~mask), port + 1);
-}
-
-#define VIA_MISC_REG_READ       0x03CC
-#define VIA_MISC_REG_WRITE      0x03C2
-
-static inline void via_write_misc_reg_mask(u8 data, u8 mask)
-{
-        u8 old = inb(VIA_MISC_REG_READ);
-        outb((data & mask) | (old & ~mask), VIA_MISC_REG_WRITE);
-}
-
-
-#endif /* __VIA_CORE_H__ */
diff --git a/drivers/video/via/via-gpio.c b/drivers/video/via/via-gpio.c
index 67d699cbfd2c..595516aea691 100644
--- a/drivers/video/via/via-gpio.c
+++ b/drivers/video/via/via-gpio.c
@@ -8,8 +8,8 @@
 #include <linux/spinlock.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
-#include "via-core.h"
-#include "via-gpio.h"
+#include <linux/via-core.h>
+#include <linux/via-gpio.h>
 
 /*
  * The ports we know about.  Note that the port-25 gpios are not
diff --git a/drivers/video/via/via-gpio.h b/drivers/video/via/via-gpio.h
deleted file mode 100644
index 8281aea3dd6d..000000000000
--- a/drivers/video/via/via-gpio.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Support for viafb GPIO ports.
- *
- * Copyright 2009 Jonathan Corbet <corbet@lwn.net>
- * Distributable under version 2 of the GNU General Public License.
- */
-
-#ifndef __VIA_GPIO_H__
-#define __VIA_GPIO_H__
-
-extern int viafb_gpio_lookup(const char *name);
-extern int viafb_gpio_init(void);
-extern void viafb_gpio_exit(void);
-#endif
diff --git a/drivers/video/via/via_i2c.c b/drivers/video/via/via_i2c.c
index 2291765f2f8e..da9e4ca94b17 100644
--- a/drivers/video/via/via_i2c.c
+++ b/drivers/video/via/via_i2c.c
@@ -23,8 +23,8 @@
 #include <linux/delay.h>
 #include <linux/spinlock.h>
 #include <linux/module.h>
-#include "via-core.h"
-#include "via_i2c.h"
+#include <linux/via-core.h>
+#include <linux/via_i2c.h>
 
 /*
  * There can only be one set of these, so there's no point in having
diff --git a/drivers/video/via/via_i2c.h b/drivers/video/via/via_i2c.h
deleted file mode 100644
index 44532e468c05..000000000000
--- a/drivers/video/via/via_i2c.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
- * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
-
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation;
- * either version 2, or (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
- * the implied warranty of MERCHANTABILITY or FITNESS FOR
- * A PARTICULAR PURPOSE.See the GNU General Public License
- * for more details.
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-#ifndef __VIA_I2C_H__
-#define __VIA_I2C_H__
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-
-struct via_i2c_stuff {
-        u16 i2c_port;                   /* GPIO or I2C port */
-        u16 is_active;                  /* Being used as I2C? */
-        struct i2c_adapter adapter;
-        struct i2c_algo_bit_data algo;
-};
-
-
-int viafb_i2c_readbyte(u8 adap, u8 slave_addr, u8 index, u8 *pdata);
-int viafb_i2c_writebyte(u8 adap, u8 slave_addr, u8 index, u8 data);
-int viafb_i2c_readbytes(u8 adap, u8 slave_addr, u8 index, u8 *buff, int buff_len);
-struct i2c_adapter *viafb_find_i2c_adapter(enum viafb_i2c_adap which);
-
-extern int viafb_i2c_init(void);
-extern void viafb_i2c_exit(void);
-#endif /* __VIA_I2C_H__ */
diff --git a/drivers/video/via/via_modesetting.c b/drivers/video/via/via_modesetting.c
index b4e735cc350e..3cddcff88ab9 100644
--- a/drivers/video/via/via_modesetting.c
+++ b/drivers/video/via/via_modesetting.c
@@ -24,8 +24,8 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/via-core.h>
 #include "via_modesetting.h"
-#include "via-core.h"
 #include "share.h"
 #include "debug.h"
 
diff --git a/drivers/video/via/via_utility.c b/drivers/video/via/via_utility.c
index 575703141868..d05ccb62b55f 100644
--- a/drivers/video/via/via_utility.c
+++ b/drivers/video/via/via_utility.c
@@ -19,7 +19,7 @@
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
-#include "via-core.h"
+#include <linux/via-core.h>
 #include "global.h"
 
 void viafb_get_device_support_state(u32 *support_state)
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 3d033186a822..d3dd2eb95586 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -22,9 +22,9 @@
 #include <linux/module.h>
 #include <linux/seq_file.h>
 #include <linux/stat.h>
-#define _MASTER_FILE
+#include <linux/via-core.h>
 
-#include "via-core.h"
+#define _MASTER_FILE
 #include "global.h"
 
 static char *viafb_name = "Via";
diff --git a/drivers/video/via/viamode.c b/drivers/video/via/viamode.c
index 2fdb9e6724a4..2dbad3c0f679 100644
--- a/drivers/video/via/viamode.c
+++ b/drivers/video/via/viamode.c
@@ -19,7 +19,7 @@
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
-#include "via-core.h"
+#include <linux/via-core.h>
 #include "global.h"
 struct res_map_refresh res_map_refresh_tbl[] = {
 /*hres, vres, vclock, vmode_refresh*/
diff --git a/drivers/video/via/vt1636.c b/drivers/video/via/vt1636.c
index e5f802472883..d65bf1aee87c 100644
--- a/drivers/video/via/vt1636.c
+++ b/drivers/video/via/vt1636.c
@@ -19,8 +19,8 @@
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
-#include "via-core.h"
-#include "via_i2c.h"
+#include <linux/via-core.h>
+#include <linux/via_i2c.h>
 #include "global.h"
 
 u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information