Merge tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci into next/drivers

DaVinci SoC updates for v3.5

This pull request updates the DaVinci SoC support to implement DEBUG_LL port
choice and optimizes the DMA ISR by removing unnecessary register reads.

* tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci:
  ARM: davinci: optimize the DMA ISR
  ARM: davinci: implement DEBUG_LL port choice
  + sync with Linux 3.4-rc6

Signed-off-by: Olof Johansson <olof@lixom.net>

13 files changed, 240 insertions, 193 deletions

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index c6f6560d436c..0bb2b3248dad 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -157,8 +157,9 @@ static void wdm_out_callback(struct urb *urb)
         spin_lock(&desc->iuspin);
         desc->werr = urb->status;
         spin_unlock(&desc->iuspin);
-        clear_bit(WDM_IN_USE, &desc->flags);
         kfree(desc->outbuf);
+        desc->outbuf = NULL;
+        clear_bit(WDM_IN_USE, &desc->flags);
         wake_up(&desc->wait);
 }
 
@@ -338,7 +339,7 @@ static ssize_t wdm_write
         if (we < 0)
                 return -EIO;
 
-        desc->outbuf = buf = kmalloc(count, GFP_KERNEL);
+        buf = kmalloc(count, GFP_KERNEL);
         if (!buf) {
                 rv = -ENOMEM;
                 goto outnl;
@@ -406,10 +407,12 @@ static ssize_t wdm_write
         req->wIndex = desc->inum;
         req->wLength = cpu_to_le16(count);
         set_bit(WDM_IN_USE, &desc->flags);
+        desc->outbuf = buf;
 
         rv = usb_submit_urb(desc->command, GFP_KERNEL);
         if (rv < 0) {
                 kfree(buf);
+                desc->outbuf = NULL;
                 clear_bit(WDM_IN_USE, &desc->flags);
                 dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
         } else {
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 622b4a48e732..57ed9e400c06 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -493,6 +493,15 @@ static int hcd_pci_suspend_noirq(struct device *dev)
 
         pci_save_state(pci_dev);
 
+        /*
+         * Some systems crash if an EHCI controller is in D3 during
+         * a sleep transition.  We have to leave such controllers in D0.
+         */
+        if (hcd->broken_pci_sleep) {
+                dev_dbg(dev, "Staying in PCI D0\n");
+                return retval;
+        }
+
         /* If the root hub is dead rather than suspended, disallow remote
          * wakeup.  usb_hc_died() should ensure that both hosts are marked as
          * dying, so we only need to check the primary roothub.
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index a6dfd2164166..170cbe89d9f8 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -927,7 +927,6 @@ static int dummy_udc_stop(struct usb_gadget *g,
 
         dum->driver = NULL;
 
-        dummy_pullup(&dum->gadget, 0);
         return 0;
 }
 
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index a371e966425f..cb8c162cae5a 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -2189,7 +2189,7 @@ unknown_cmnd:
                 common->data_size_from_cmnd = 0;
                 sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
                 reply = check_command(common, common->cmnd_size,
-                                      DATA_DIR_UNKNOWN, 0xff, 0, unknown);
+                                      DATA_DIR_UNKNOWN, ~0, 0, unknown);
                 if (reply == 0) {
                         common->curlun->sense_data = SS_INVALID_COMMAND;
                         reply = -EINVAL;
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 4fac56927741..a896d73f7a93 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -2579,7 +2579,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
                 fsg->data_size_from_cmnd = 0;
                 sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
                 if ((reply = check_command(fsg, fsg->cmnd_size,
-                                DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) {
+                                DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) {
                         fsg->curlun->sense_data = SS_INVALID_COMMAND;
                         reply = -EINVAL;
                 }
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 2fa9865babed..e5e44f8cde9a 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -263,8 +263,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
 
         if (udc_is_newstyle(udc)) {
                 udc->driver->disconnect(udc->gadget);
-                udc->driver->unbind(udc->gadget);
                 usb_gadget_disconnect(udc->gadget);
+                udc->driver->unbind(udc->gadget);
                 usb_gadget_udc_stop(udc->gadget, udc->driver);
         } else {
                 usb_gadget_stop(udc->gadget, udc->driver);
@@ -415,9 +415,9 @@ static ssize_t usb_udc_softconn_store(struct device *dev,
                         usb_gadget_udc_start(udc->gadget, udc->driver);
                 usb_gadget_connect(udc->gadget);
         } else if (sysfs_streq(buf, "disconnect")) {
+                usb_gadget_disconnect(udc->gadget);
                 if (udc_is_newstyle(udc))
                         usb_gadget_udc_stop(udc->gadget, udc->driver);
-                usb_gadget_disconnect(udc->gadget);
         } else {
                 dev_err(dev, "unsupported command '%s'\n", buf);
                 return -EINVAL;
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index bc78c606c12b..ca4e03a1c73a 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -28,7 +28,7 @@
 
 struct uvc_request_data
 {
-        unsigned int length;
+        __s32 length;
         __u8 data[60];
 };
 
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index f6e083b50191..54d7ca559cb2 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -39,7 +39,7 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data)
         if (data->length < 0)
                 return usb_ep_set_halt(cdev->gadget->ep0);
 
-        req->length = min(uvc->event_length, data->length);
+        req->length = min_t(unsigned int, uvc->event_length, data->length);
         req->zero = data->length < uvc->event_length;
         req->dma = DMA_ADDR_INVALID;
 
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 01bb7241d6ef..fe8dc069164e 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -144,6 +144,14 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
                         hcd->has_tt = 1;
                         tdi_reset(ehci);
                 }
+                if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
+                        /* EHCI #1 or #2 on 6 Series/C200 Series chipset */
+                        if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
+                                ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
+                                hcd->broken_pci_sleep = 1;
+                                device_set_wakeup_capable(&pdev->dev, false);
+                        }
+                }
                 break;
         case PCI_VENDOR_ID_TDI:
                 if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 10bb3ea276f9..99ae5ea3f8d1 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -24,6 +24,7 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
+#include <linux/pm_runtime.h>
 
 #include <mach/usb_phy.h>
 #include <mach/iomap.h>
@@ -37,9 +38,7 @@ struct tegra_ehci_hcd {
         struct clk *emc_clk;
         struct usb_phy *transceiver;
         int host_resumed;
-        int bus_suspended;
         int port_resuming;
-        int power_down_on_bus_suspend;
         enum tegra_usb_phy_port_speed port_speed;
 };
 
@@ -273,120 +272,6 @@ static void tegra_ehci_restart(struct usb_hcd *hcd)
         up_write(&ehci_cf_port_reset_rwsem);
 }
 
-static int tegra_usb_suspend(struct usb_hcd *hcd)
-{
-        struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-        struct ehci_regs __iomem *hw = tegra->ehci->regs;
-        unsigned long flags;
-
-        spin_lock_irqsave(&tegra->ehci->lock, flags);
-
-        tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
-        ehci_halt(tegra->ehci);
-        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
-        spin_unlock_irqrestore(&tegra->ehci->lock, flags);
-
-        tegra_ehci_power_down(hcd);
-        return 0;
-}
-
-static int tegra_usb_resume(struct usb_hcd *hcd)
-{
-        struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        struct ehci_regs __iomem *hw = ehci->regs;
-        unsigned long val;
-
-        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-        tegra_ehci_power_up(hcd);
-
-        if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
-                /* Wait for the phy to detect new devices
-                 * before we restart the controller */
-                msleep(10);
-                goto restart;
-        }
-
-        /* Force the phy to keep data lines in suspend state */
-        tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed);
-
-        /* Enable host mode */
-        tdi_reset(ehci);
-
-        /* Enable Port Power */
-        val = readl(&hw->port_status[0]);
-        val |= PORT_POWER;
-        writel(val, &hw->port_status[0]);
-        udelay(10);
-
-        /* Check if the phy resume from LP0. When the phy resume from LP0
-         * USB register will be reset. */
-        if (!readl(&hw->async_next)) {
-                /* Program the field PTC based on the saved speed mode */
-                val = readl(&hw->port_status[0]);
-                val &= ~PORT_TEST(~0);
-                if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
-                        val |= PORT_TEST_FORCE;
-                else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
-                        val |= PORT_TEST(6);
-                else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
-                        val |= PORT_TEST(7);
-                writel(val, &hw->port_status[0]);
-                udelay(10);
-
-                /* Disable test mode by setting PTC field to NORMAL_OP */
-                val = readl(&hw->port_status[0]);
-                val &= ~PORT_TEST(~0);
-                writel(val, &hw->port_status[0]);
-                udelay(10);
-        }
-
-        /* Poll until CCS is enabled */
-        if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
-                                                 PORT_CONNECT, 2000)) {
-                pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
-                goto restart;
-        }
-
-        /* Poll until PE is enabled */
-        if (handshake(ehci, &hw->port_status[0], PORT_PE,
-                                                 PORT_PE, 2000)) {
-                pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
-                goto restart;
-        }
-
-        /* Clear the PCI status, to avoid an interrupt taken upon resume */
-        val = readl(&hw->status);
-        val |= STS_PCD;
-        writel(val, &hw->status);
-
-        /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
-        val = readl(&hw->port_status[0]);
-        if ((val & PORT_POWER) && (val & PORT_PE)) {
-                val |= PORT_SUSPEND;
-                writel(val, &hw->port_status[0]);
-
-                /* Wait until port suspend completes */
-                if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
-                                                         PORT_SUSPEND, 1000)) {
-                        pr_err("%s: timeout waiting for PORT_SUSPEND\n",
-                                                                __func__);
-                        goto restart;
-                }
-        }
-
-        tegra_ehci_phy_restore_end(tegra->phy);
-        return 0;
-
-restart:
-        if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
-                tegra_ehci_phy_restore_end(tegra->phy);
-
-        tegra_ehci_restart(hcd);
-        return 0;
-}
-
 static void tegra_ehci_shutdown(struct usb_hcd *hcd)
 {
         struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
@@ -434,36 +319,6 @@ static int tegra_ehci_setup(struct usb_hcd *hcd)
         return retval;
 }
 
-#ifdef CONFIG_PM
-static int tegra_ehci_bus_suspend(struct usb_hcd *hcd)
-{
-        struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-        int error_status = 0;
-
-        error_status = ehci_bus_suspend(hcd);
-        if (!error_status && tegra->power_down_on_bus_suspend) {
-                tegra_usb_suspend(hcd);
-                tegra->bus_suspended = 1;
-        }
-
-        return error_status;
-}
-
-static int tegra_ehci_bus_resume(struct usb_hcd *hcd)
-{
-        struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
-
-        if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) {
-                tegra_usb_resume(hcd);
-                tegra->bus_suspended = 0;
-        }
-
-        tegra_usb_phy_preresume(tegra->phy);
-        tegra->port_resuming = 1;
-        return ehci_bus_resume(hcd);
-}
-#endif
-
 struct temp_buffer {
         void *kmalloc_ptr;
         void *old_xfer_buffer;
@@ -574,8 +429,8 @@ static const struct hc_driver tegra_ehci_hc_driver = {
         .hub_control            = tegra_ehci_hub_control,
         .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 #ifdef CONFIG_PM
-        .bus_suspend            = tegra_ehci_bus_suspend,
-        .bus_resume             = tegra_ehci_bus_resume,
+        .bus_suspend            = ehci_bus_suspend,
+        .bus_resume             = ehci_bus_resume,
 #endif
         .relinquish_port        = ehci_relinquish_port,
         .port_handed_over       = ehci_port_handed_over,
@@ -604,11 +459,187 @@ static int setup_vbus_gpio(struct platform_device *pdev,
                 dev_err(&pdev->dev, "can't enable vbus\n");
                 return err;
         }
-        gpio_set_value(gpio, 1);
 
         return err;
 }
 
+#ifdef CONFIG_PM
+
+static int controller_suspend(struct device *dev)
+{
+        struct tegra_ehci_hcd *tegra =
+                        platform_get_drvdata(to_platform_device(dev));
+        struct ehci_hcd *ehci = tegra->ehci;
+        struct usb_hcd *hcd = ehci_to_hcd(ehci);
+        struct ehci_regs __iomem *hw = ehci->regs;
+        unsigned long flags;
+
+        if (time_before(jiffies, ehci->next_statechange))
+                msleep(10);
+
+        spin_lock_irqsave(&ehci->lock, flags);
+
+        tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
+        ehci_halt(ehci);
+        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+        spin_unlock_irqrestore(&ehci->lock, flags);
+
+        tegra_ehci_power_down(hcd);
+        return 0;
+}
+
+static int controller_resume(struct device *dev)
+{
+        struct tegra_ehci_hcd *tegra =
+                        platform_get_drvdata(to_platform_device(dev));
+        struct ehci_hcd *ehci = tegra->ehci;
+        struct usb_hcd *hcd = ehci_to_hcd(ehci);
+        struct ehci_regs __iomem *hw = ehci->regs;
+        unsigned long val;
+
+        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+        tegra_ehci_power_up(hcd);
+
+        if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
+                /* Wait for the phy to detect new devices
+                 * before we restart the controller */
+                msleep(10);
+                goto restart;
+        }
+
+        /* Force the phy to keep data lines in suspend state */
+        tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed);
+
+        /* Enable host mode */
+        tdi_reset(ehci);
+
+        /* Enable Port Power */
+        val = readl(&hw->port_status[0]);
+        val |= PORT_POWER;
+        writel(val, &hw->port_status[0]);
+        udelay(10);
+
+        /* Check if the phy resume from LP0. When the phy resume from LP0
+         * USB register will be reset. */
+        if (!readl(&hw->async_next)) {
+                /* Program the field PTC based on the saved speed mode */
+                val = readl(&hw->port_status[0]);
+                val &= ~PORT_TEST(~0);
+                if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
+                        val |= PORT_TEST_FORCE;
+                else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
+                        val |= PORT_TEST(6);
+                else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
+                        val |= PORT_TEST(7);
+                writel(val, &hw->port_status[0]);
+                udelay(10);
+
+                /* Disable test mode by setting PTC field to NORMAL_OP */
+                val = readl(&hw->port_status[0]);
+                val &= ~PORT_TEST(~0);
+                writel(val, &hw->port_status[0]);
+                udelay(10);
+        }
+
+        /* Poll until CCS is enabled */
+        if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
+                                                 PORT_CONNECT, 2000)) {
+                pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
+                goto restart;
+        }
+
+        /* Poll until PE is enabled */
+        if (handshake(ehci, &hw->port_status[0], PORT_PE,
+                                                 PORT_PE, 2000)) {
+                pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
+                goto restart;
+        }
+
+        /* Clear the PCI status, to avoid an interrupt taken upon resume */
+        val = readl(&hw->status);
+        val |= STS_PCD;
+        writel(val, &hw->status);
+
+        /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
+        val = readl(&hw->port_status[0]);
+        if ((val & PORT_POWER) && (val & PORT_PE)) {
+                val |= PORT_SUSPEND;
+                writel(val, &hw->port_status[0]);
+
+                /* Wait until port suspend completes */
+                if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
+                                                         PORT_SUSPEND, 1000)) {
+                        pr_err("%s: timeout waiting for PORT_SUSPEND\n",
+                                                                __func__);
+                        goto restart;
+                }
+        }
+
+        tegra_ehci_phy_restore_end(tegra->phy);
+        goto done;
+
+ restart:
+        if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
+                tegra_ehci_phy_restore_end(tegra->phy);
+
+        tegra_ehci_restart(hcd);
+
+ done:
+        tegra_usb_phy_preresume(tegra->phy);
+        tegra->port_resuming = 1;
+        return 0;
+}
+
+static int tegra_ehci_suspend(struct device *dev)
+{
+        struct tegra_ehci_hcd *tegra =
+                        platform_get_drvdata(to_platform_device(dev));
+        struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
+        int rc = 0;
+
+        /*
+         * When system sleep is supported and USB controller wakeup is
+         * implemented: If the controller is runtime-suspended and the
+         * wakeup setting needs to be changed, call pm_runtime_resume().
+         */
+        if (HCD_HW_ACCESSIBLE(hcd))
+                rc = controller_suspend(dev);
+        return rc;
+}
+
+static int tegra_ehci_resume(struct device *dev)
+{
+        int rc;
+
+        rc = controller_resume(dev);
+        if (rc == 0) {
+                pm_runtime_disable(dev);
+                pm_runtime_set_active(dev);
+                pm_runtime_enable(dev);
+        }
+        return rc;
+}
+
+static int tegra_ehci_runtime_suspend(struct device *dev)
+{
+        return controller_suspend(dev);
+}
+
+static int tegra_ehci_runtime_resume(struct device *dev)
+{
+        return controller_resume(dev);
+}
+
+static const struct dev_pm_ops tegra_ehci_pm_ops = {
+        .suspend        = tegra_ehci_suspend,
+        .resume         = tegra_ehci_resume,
+        .runtime_suspend = tegra_ehci_runtime_suspend,
+        .runtime_resume = tegra_ehci_runtime_resume,
+};
+
+#endif
+
 static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
 
 static int tegra_ehci_probe(struct platform_device *pdev)
@@ -724,7 +755,6 @@ static int tegra_ehci_probe(struct platform_device *pdev)
         }
 
         tegra->host_resumed = 1;
-        tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend;
         tegra->ehci = hcd_to_ehci(hcd);
 
         irq = platform_get_irq(pdev, 0);
@@ -748,6 +778,14 @@ static int tegra_ehci_probe(struct platform_device *pdev)
                 goto fail;
         }
 
+        pm_runtime_set_active(&pdev->dev);
+        pm_runtime_get_noresume(&pdev->dev);
+
+        /* Don't skip the pm_runtime_forbid call if wakeup isn't working */
+        /* if (!pdata->power_down_on_bus_suspend) */
+                pm_runtime_forbid(&pdev->dev);
+        pm_runtime_enable(&pdev->dev);
+        pm_runtime_put_sync(&pdev->dev);
         return err;
 
 fail:
@@ -774,33 +812,6 @@ fail_hcd:
         return err;
 }
 
-#ifdef CONFIG_PM
-static int tegra_ehci_resume(struct platform_device *pdev)
-{
-        struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
-        struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
-
-        if (tegra->bus_suspended)
-                return 0;
-
-        return tegra_usb_resume(hcd);
-}
-
-static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state)
-{
-        struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
-        struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
-
-        if (tegra->bus_suspended)
-                return 0;
-
-        if (time_before(jiffies, tegra->ehci->next_statechange))
-                msleep(10);
-
-        return tegra_usb_suspend(hcd);
-}
-#endif
-
 static int tegra_ehci_remove(struct platform_device *pdev)
 {
         struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
@@ -809,6 +820,10 @@ static int tegra_ehci_remove(struct platform_device *pdev)
         if (tegra == NULL || hcd == NULL)
                 return -EINVAL;
 
+        pm_runtime_get_sync(&pdev->dev);
+        pm_runtime_disable(&pdev->dev);
+        pm_runtime_put_noidle(&pdev->dev);
+
 #ifdef CONFIG_USB_OTG_UTILS
         if (tegra->transceiver) {
                 otg_set_host(tegra->transceiver->otg, NULL);
@@ -849,13 +864,12 @@ static struct of_device_id tegra_ehci_of_match[] __devinitdata = {
 static struct platform_driver tegra_ehci_driver = {
         .probe          = tegra_ehci_probe,
         .remove         = tegra_ehci_remove,
-#ifdef CONFIG_PM
-        .suspend        = tegra_ehci_suspend,
-        .resume         = tegra_ehci_resume,
-#endif
         .shutdown       = tegra_ehci_hcd_shutdown,
         .driver         = {
                 .name   = "tegra-ehci",
                 .of_match_table = tegra_ehci_of_match,
+#ifdef CONFIG_PM
+                .pm     = &tegra_ehci_pm_ops,
+#endif
         }
 };
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 97ab975fa442..768b4b55c816 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -386,7 +386,7 @@ static int davinci_musb_init(struct musb *musb)
         usb_nop_xceiv_register();
         musb->xceiv = usb_get_transceiver();
         if (!musb->xceiv)
-                return -ENODEV;
+                goto unregister;
 
         musb->mregs += DAVINCI_BASE_OFFSET;
 
@@ -444,6 +444,7 @@ static int davinci_musb_init(struct musb *musb)
 
 fail:
         usb_put_transceiver(musb->xceiv);
+unregister:
         usb_nop_xceiv_unregister();
         return -ENODEV;
 }
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 93de517a32a0..f4a40f001c88 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -449,7 +449,7 @@ struct musb {
          * We added this flag to forcefully disable double
          * buffering until we get it working.
          */
-        unsigned                double_buffer_not_ok:1 __deprecated;
+        unsigned                double_buffer_not_ok:1;
 
         struct musb_hdrc_config *config;
 
diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c
index 3ece43a2e4c1..a0a2178974fe 100644
--- a/drivers/usb/otg/gpio_vbus.c
+++ b/drivers/usb/otg/gpio_vbus.c
@@ -96,7 +96,7 @@ static void gpio_vbus_work(struct work_struct *work)
         struct gpio_vbus_data *gpio_vbus =
                 container_of(work, struct gpio_vbus_data, work);
         struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data;
-        int gpio;
+        int gpio, status;
 
         if (!gpio_vbus->phy.otg->gadget)
                 return;
@@ -108,7 +108,9 @@ static void gpio_vbus_work(struct work_struct *work)
          */
         gpio = pdata->gpio_pullup;
         if (is_vbus_powered(pdata)) {
+                status = USB_EVENT_VBUS;
                 gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL;
+                gpio_vbus->phy.last_event = status;
                 usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget);
 
                 /* drawing a "unit load" is *always* OK, except for OTG */
@@ -117,6 +119,9 @@ static void gpio_vbus_work(struct work_struct *work)
                 /* optionally enable D+ pullup */
                 if (gpio_is_valid(gpio))
                         gpio_set_value(gpio, !pdata->gpio_pullup_inverted);
+
+                atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
+                                           status, gpio_vbus->phy.otg->gadget);
         } else {
                 /* optionally disable D+ pullup */
                 if (gpio_is_valid(gpio))
@@ -125,7 +130,12 @@ static void gpio_vbus_work(struct work_struct *work)
                 set_vbus_draw(gpio_vbus, 0);
 
                 usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget);
+                status = USB_EVENT_NONE;
                 gpio_vbus->phy.state = OTG_STATE_B_IDLE;
+                gpio_vbus->phy.last_event = status;
+
+                atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
+                                           status, gpio_vbus->phy.otg->gadget);
         }
 }
 
@@ -287,6 +297,9 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
                         irq, err);
                 goto err_irq;
         }
+
+        ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier);
+
         INIT_WORK(&gpio_vbus->work, gpio_vbus_work);
 
         gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw");