aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
authorHaavard Skinnemoen <hskinnemoen@atmel.com>2007-10-10 05:29:43 -0400
committerGreg Kroah-Hartman <gregkh@suse.de>2007-10-12 17:55:33 -0400
commit914a3f3b375493eb44ad652a431939258cf34f71 (patch)
tree83f603584d81e5fe2f8800ed56c2410448111f5c /drivers/usb
parentc604e851486eabcbeb73e984279d436ce121fd5d (diff)
USB: add atmel_usba_udc driver
This is a driver for the Atmel USBA UDC which can be found integrated on AT32AP700x AVR32 processors. For hardware documentation, please see the AT32AP7000 data sheet: http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf This is a dual speed controller (connects at high or full speed). The driver supports up to 7 control, bulk, interrupt and isochronous endpoints with some constraints. Bulk, interrupt and isochronous transfers are driven by DMA. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/gadget/Kconfig26
-rw-r--r--drivers/usb/gadget/Makefile1
-rw-r--r--drivers/usb/gadget/atmel_usba_udc.c2038
-rw-r--r--drivers/usb/gadget/atmel_usba_udc.h350
4 files changed, 2414 insertions, 1 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 767aed5b4bea..f81d08d6538b 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -67,6 +67,17 @@ config USB_GADGET_DEBUG_FILES
67 driver on a new board. Enable these files by choosing "Y" 67 driver on a new board. Enable these files by choosing "Y"
68 here. If in doubt, or to conserve kernel memory, say "N". 68 here. If in doubt, or to conserve kernel memory, say "N".
69 69
70config USB_GADGET_DEBUG_FS
71 boolean "Debugging information files in debugfs"
72 depends on USB_GADGET && DEBUG_FS
73 help
74 Some of the drivers in the "gadget" framework can expose
75 debugging information in files under /sys/kernel/debug/.
76 The information in these files may help when you're
77 troubleshooting or bringing up a driver on a new board.
78 Enable these files by choosing "Y" here. If in doubt, or
79 to conserve kernel memory, say "N".
80
70config USB_GADGET_SELECTED 81config USB_GADGET_SELECTED
71 boolean 82 boolean
72 83
@@ -103,6 +114,20 @@ config USB_AMD5536UDC
103 default USB_GADGET 114 default USB_GADGET
104 select USB_GADGET_SELECTED 115 select USB_GADGET_SELECTED
105 116
117config USB_GADGET_ATMEL_USBA
118 boolean "Atmel USBA"
119 select USB_GADGET_DUALSPEED
120 depends on AVR32
121 help
122 USBA is the integrated high-speed USB Device controller on
123 the AT32AP700x processors from Atmel.
124
125config USB_ATMEL_USBA
126 tristate
127 depends on USB_GADGET_ATMEL_USBA
128 default USB_GADGET
129 select USB_GADGET_SELECTED
130
106config USB_GADGET_FSL_USB2 131config USB_GADGET_FSL_USB2
107 boolean "Freescale Highspeed USB DR Peripheral Controller" 132 boolean "Freescale Highspeed USB DR Peripheral Controller"
108 depends on MPC834x || PPC_MPC831x 133 depends on MPC834x || PPC_MPC831x
@@ -228,7 +253,6 @@ config USB_LH7A40X
228 default USB_GADGET 253 default USB_GADGET
229 select USB_GADGET_SELECTED 254 select USB_GADGET_SELECTED
230 255
231
232config USB_GADGET_OMAP 256config USB_GADGET_OMAP
233 boolean "OMAP USB Device Controller" 257 boolean "OMAP USB Device Controller"
234 depends on ARCH_OMAP 258 depends on ARCH_OMAP
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 1bc0f03550ce..904e57bf6112 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_OMAP) += omap_udc.o
14obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o 14obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
15obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o 15obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o
16obj-$(CONFIG_USB_AT91) += at91_udc.o 16obj-$(CONFIG_USB_AT91) += at91_udc.o
17obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
17obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o 18obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
18obj-$(CONFIG_USB_M66592) += m66592-udc.o 19obj-$(CONFIG_USB_M66592) += m66592-udc.o
19 20
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
new file mode 100644
index 000000000000..2bb28a583937
--- /dev/null
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -0,0 +1,2038 @@
1/*
2 * Driver for the Atmel USBA high speed USB device controller
3 *
4 * Copyright (C) 2005-2007 Atmel Corporation
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10#include <linux/clk.h>
11#include <linux/module.h>
12#include <linux/init.h>
13#include <linux/interrupt.h>
14#include <linux/io.h>
15#include <linux/device.h>
16#include <linux/dma-mapping.h>
17#include <linux/list.h>
18#include <linux/platform_device.h>
19#include <linux/usb/ch9.h>
20#include <linux/usb/gadget.h>
21#include <linux/delay.h>
22
23#include <asm/gpio.h>
24#include <asm/arch/board.h>
25
26#include "atmel_usba_udc.h"
27
28
29static struct usba_udc the_udc;
30
31#ifdef CONFIG_USB_GADGET_DEBUG_FS
32#include <linux/debugfs.h>
33#include <linux/uaccess.h>
34
35static int queue_dbg_open(struct inode *inode, struct file *file)
36{
37 struct usba_ep *ep = inode->i_private;
38 struct usba_request *req, *req_copy;
39 struct list_head *queue_data;
40
41 queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL);
42 if (!queue_data)
43 return -ENOMEM;
44 INIT_LIST_HEAD(queue_data);
45
46 spin_lock_irq(&ep->udc->lock);
47 list_for_each_entry(req, &ep->queue, queue) {
48 req_copy = kmalloc(sizeof(*req_copy), GFP_ATOMIC);
49 if (!req_copy)
50 goto fail;
51 memcpy(req_copy, req, sizeof(*req_copy));
52 list_add_tail(&req_copy->queue, queue_data);
53 }
54 spin_unlock_irq(&ep->udc->lock);
55
56 file->private_data = queue_data;
57 return 0;
58
59fail:
60 spin_unlock_irq(&ep->udc->lock);
61 list_for_each_entry_safe(req, req_copy, queue_data, queue) {
62 list_del(&req->queue);
63 kfree(req);
64 }
65 kfree(queue_data);
66 return -ENOMEM;
67}
68
69/*
70 * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0
71 *
72 * b: buffer address
73 * l: buffer length
74 * I/i: interrupt/no interrupt
75 * Z/z: zero/no zero
76 * S/s: short ok/short not ok
77 * s: status
78 * n: nr_packets
79 * F/f: submitted/not submitted to FIFO
80 * D/d: using/not using DMA
81 * L/l: last transaction/not last transaction
82 */
83static ssize_t queue_dbg_read(struct file *file, char __user *buf,
84 size_t nbytes, loff_t *ppos)
85{
86 struct list_head *queue = file->private_data;
87 struct usba_request *req, *tmp_req;
88 size_t len, remaining, actual = 0;
89 char tmpbuf[38];
90
91 if (!access_ok(VERIFY_WRITE, buf, nbytes))
92 return -EFAULT;
93
94 mutex_lock(&file->f_dentry->d_inode->i_mutex);
95 list_for_each_entry_safe(req, tmp_req, queue, queue) {
96 len = snprintf(tmpbuf, sizeof(tmpbuf),
97 "%8p %08x %c%c%c %5d %c%c%c\n",
98 req->req.buf, req->req.length,
99 req->req.no_interrupt ? 'i' : 'I',
100 req->req.zero ? 'Z' : 'z',
101 req->req.short_not_ok ? 's' : 'S',
102 req->req.status,
103 req->submitted ? 'F' : 'f',
104 req->using_dma ? 'D' : 'd',
105 req->last_transaction ? 'L' : 'l');
106 len = min(len, sizeof(tmpbuf));
107 if (len > nbytes)
108 break;
109
110 list_del(&req->queue);
111 kfree(req);
112
113 remaining = __copy_to_user(buf, tmpbuf, len);
114 actual += len - remaining;
115 if (remaining)
116 break;
117
118 nbytes -= len;
119 buf += len;
120 }
121 mutex_unlock(&file->f_dentry->d_inode->i_mutex);
122
123 return actual;
124}
125
126static int queue_dbg_release(struct inode *inode, struct file *file)
127{
128 struct list_head *queue_data = file->private_data;
129 struct usba_request *req, *tmp_req;
130
131 list_for_each_entry_safe(req, tmp_req, queue_data, queue) {
132 list_del(&req->queue);
133 kfree(req);
134 }
135 kfree(queue_data);
136 return 0;
137}
138
139static int regs_dbg_open(struct inode *inode, struct file *file)
140{
141 struct usba_udc *udc;
142 unsigned int i;
143 u32 *data;
144 int ret = -ENOMEM;
145
146 mutex_lock(&inode->i_mutex);
147 udc = inode->i_private;
148 data = kmalloc(inode->i_size, GFP_KERNEL);
149 if (!data)
150 goto out;
151
152 spin_lock_irq(&udc->lock);
153 for (i = 0; i < inode->i_size / 4; i++)
154 data[i] = __raw_readl(udc->regs + i * 4);
155 spin_unlock_irq(&udc->lock);
156
157 file->private_data = data;
158 ret = 0;
159
160out:
161 mutex_unlock(&inode->i_mutex);
162
163 return ret;
164}
165
166static ssize_t regs_dbg_read(struct file *file, char __user *buf,
167 size_t nbytes, loff_t *ppos)
168{
169 struct inode *inode = file->f_dentry->d_inode;
170 int ret;
171
172 mutex_lock(&inode->i_mutex);
173 ret = simple_read_from_buffer(buf, nbytes, ppos,
174 file->private_data,
175 file->f_dentry->d_inode->i_size);
176 mutex_unlock(&inode->i_mutex);
177
178 return ret;
179}
180
181static int regs_dbg_release(struct inode *inode, struct file *file)
182{
183 kfree(file->private_data);
184 return 0;
185}
186
187const struct file_operations queue_dbg_fops = {
188 .owner = THIS_MODULE,
189 .open = queue_dbg_open,
190 .llseek = no_llseek,
191 .read = queue_dbg_read,
192 .release = queue_dbg_release,
193};
194
195const struct file_operations regs_dbg_fops = {
196 .owner = THIS_MODULE,
197 .open = regs_dbg_open,
198 .llseek = generic_file_llseek,
199 .read = regs_dbg_read,
200 .release = regs_dbg_release,
201};
202
203static void usba_ep_init_debugfs(struct usba_udc *udc,
204 struct usba_ep *ep)
205{
206 struct dentry *ep_root;
207
208 ep_root = debugfs_create_dir(ep->ep.name, udc->debugfs_root);
209 if (!ep_root)
210 goto err_root;
211 ep->debugfs_dir = ep_root;
212
213 ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root,
214 ep, &queue_dbg_fops);
215 if (!ep->debugfs_queue)
216 goto err_queue;
217
218 if (ep->can_dma) {
219 ep->debugfs_dma_status
220 = debugfs_create_u32("dma_status", 0400, ep_root,
221 &ep->last_dma_status);
222 if (!ep->debugfs_dma_status)
223 goto err_dma_status;
224 }
225 if (ep_is_control(ep)) {
226 ep->debugfs_state
227 = debugfs_create_u32("state", 0400, ep_root,
228 &ep->state);
229 if (!ep->debugfs_state)
230 goto err_state;
231 }
232
233 return;
234
235err_state:
236 if (ep->can_dma)
237 debugfs_remove(ep->debugfs_dma_status);
238err_dma_status:
239 debugfs_remove(ep->debugfs_queue);
240err_queue:
241 debugfs_remove(ep_root);
242err_root:
243 dev_err(&ep->udc->pdev->dev,
244 "failed to create debugfs directory for %s\n", ep->ep.name);
245}
246
247static void usba_ep_cleanup_debugfs(struct usba_ep *ep)
248{
249 debugfs_remove(ep->debugfs_queue);
250 debugfs_remove(ep->debugfs_dma_status);
251 debugfs_remove(ep->debugfs_state);
252 debugfs_remove(ep->debugfs_dir);
253 ep->debugfs_dma_status = NULL;
254 ep->debugfs_dir = NULL;
255}
256
257static void usba_init_debugfs(struct usba_udc *udc)
258{
259 struct dentry *root, *regs;
260 struct resource *regs_resource;
261
262 root = debugfs_create_dir(udc->gadget.name, NULL);
263 if (IS_ERR(root) || !root)
264 goto err_root;
265 udc->debugfs_root = root;
266
267 regs = debugfs_create_file("regs", 0400, root, udc, &regs_dbg_fops);
268 if (!regs)
269 goto err_regs;
270
271 regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM,
272 CTRL_IOMEM_ID);
273 regs->d_inode->i_size = regs_resource->end - regs_resource->start + 1;
274 udc->debugfs_regs = regs;
275
276 usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0));
277
278 return;
279
280err_regs:
281 debugfs_remove(root);
282err_root:
283 udc->debugfs_root = NULL;
284 dev_err(&udc->pdev->dev, "debugfs is not available\n");
285}
286
287static void usba_cleanup_debugfs(struct usba_udc *udc)
288{
289 usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0));
290 debugfs_remove(udc->debugfs_regs);
291 debugfs_remove(udc->debugfs_root);
292 udc->debugfs_regs = NULL;
293 udc->debugfs_root = NULL;
294}
295#else
296static inline void usba_ep_init_debugfs(struct usba_udc *udc,
297 struct usba_ep *ep)
298{
299
300}
301
302static inline void usba_ep_cleanup_debugfs(struct usba_ep *ep)
303{
304
305}
306
307static inline void usba_init_debugfs(struct usba_udc *udc)
308{
309
310}
311
312static inline void usba_cleanup_debugfs(struct usba_udc *udc)
313{
314
315}
316#endif
317
318static int vbus_is_present(struct usba_udc *udc)
319{
320 if (udc->vbus_pin != -1)
321 return gpio_get_value(udc->vbus_pin);
322
323 /* No Vbus detection: Assume always present */
324 return 1;
325}
326
327static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
328{
329 unsigned long tmp;
330
331 DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
332 for (; len > 0; len -= 4, buf += 4, fifo += 4) {
333 tmp = *(unsigned long *)buf;
334 if (len >= 4) {
335 DBG(DBG_FIFO, " -> %08lx\n", tmp);
336 __raw_writel(tmp, fifo);
337 } else {
338 do {
339 DBG(DBG_FIFO, " -> %02lx\n", tmp >> 24);
340 __raw_writeb(tmp >> 24, fifo);
341 fifo++;
342 tmp <<= 8;
343 } while (--len);
344 break;
345 }
346 }
347}
348
349static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
350{
351 union {
352 unsigned long *w;
353 unsigned char *b;
354 } p;
355 unsigned long tmp;
356
357 DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
358 for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
359 if (len >= 4) {
360 tmp = __raw_readl(fifo);
361 *p.w = tmp;
362 DBG(DBG_FIFO, " -> %08lx\n", tmp);
363 } else {
364 do {
365 tmp = __raw_readb(fifo);
366 *p.b = tmp;
367 DBG(DBG_FIFO, " -> %02lx\n", tmp);
368 fifo++, p.b++;
369 } while (--len);
370 }
371 }
372}
373
374static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
375{
376 unsigned int transaction_len;
377
378 transaction_len = req->req.length - req->req.actual;
379 req->last_transaction = 1;
380 if (transaction_len > ep->ep.maxpacket) {
381 transaction_len = ep->ep.maxpacket;
382 req->last_transaction = 0;
383 } else if (transaction_len == ep->ep.maxpacket && req->req.zero)
384 req->last_transaction = 0;
385
386 DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n",
387 ep->ep.name, req, transaction_len,
388 req->last_transaction ? ", done" : "");
389
390 copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
391 usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
392 req->req.actual += transaction_len;
393}
394
395static void submit_request(struct usba_ep *ep, struct usba_request *req)
396{
397 DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n",
398 ep->ep.name, req, req->req.length);
399
400 req->req.actual = 0;
401 req->submitted = 1;
402
403 if (req->using_dma) {
404 if (req->req.length == 0) {
405 usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
406 return;
407 }
408
409 if (req->req.zero)
410 usba_ep_writel(ep, CTL_ENB, USBA_SHORT_PACKET);
411 else
412 usba_ep_writel(ep, CTL_DIS, USBA_SHORT_PACKET);
413
414 usba_dma_writel(ep, ADDRESS, req->req.dma);
415 usba_dma_writel(ep, CONTROL, req->ctrl);
416 } else {
417 next_fifo_transaction(ep, req);
418 if (req->last_transaction) {
419 usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
420 usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
421 } else {
422 usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
423 usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
424 }
425 }
426}
427
428static void submit_next_request(struct usba_ep *ep)
429{
430 struct usba_request *req;
431
432 if (list_empty(&ep->queue)) {
433 usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY | USBA_RX_BK_RDY);
434 return;
435 }
436
437 req = list_entry(ep->queue.next, struct usba_request, queue);
438 if (!req->submitted)
439 submit_request(ep, req);
440}
441
442static void send_status(struct usba_udc *udc, struct usba_ep *ep)
443{
444 ep->state = STATUS_STAGE_IN;
445 usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
446 usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
447}
448
449static void receive_data(struct usba_ep *ep)
450{
451 struct usba_udc *udc = ep->udc;
452 struct usba_request *req;
453 unsigned long status;
454 unsigned int bytecount, nr_busy;
455 int is_complete = 0;
456
457 status = usba_ep_readl(ep, STA);
458 nr_busy = USBA_BFEXT(BUSY_BANKS, status);
459
460 DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy);
461
462 while (nr_busy > 0) {
463 if (list_empty(&ep->queue)) {
464 usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
465 break;
466 }
467 req = list_entry(ep->queue.next,
468 struct usba_request, queue);
469
470 bytecount = USBA_BFEXT(BYTE_COUNT, status);
471
472 if (status & (1 << 31))
473 is_complete = 1;
474 if (req->req.actual + bytecount >= req->req.length) {
475 is_complete = 1;
476 bytecount = req->req.length - req->req.actual;
477 }
478
479 copy_from_fifo(req->req.buf + req->req.actual,
480 ep->fifo, bytecount);
481 req->req.actual += bytecount;
482
483 usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
484
485 if (is_complete) {
486 DBG(DBG_QUEUE, "%s: request done\n", ep->ep.name);
487 req->req.status = 0;
488 list_del_init(&req->queue);
489 usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
490 spin_unlock(&udc->lock);
491 req->req.complete(&ep->ep, &req->req);
492 spin_lock(&udc->lock);
493 }
494
495 status = usba_ep_readl(ep, STA);
496 nr_busy = USBA_BFEXT(BUSY_BANKS, status);
497
498 if (is_complete && ep_is_control(ep)) {
499 send_status(udc, ep);
500 break;
501 }
502 }
503}
504
505static void
506request_complete(struct usba_ep *ep, struct usba_request *req, int status)
507{
508 struct usba_udc *udc = ep->udc;
509
510 WARN_ON(!list_empty(&req->queue));
511
512 if (req->req.status == -EINPROGRESS)
513 req->req.status = status;
514
515 if (req->mapped) {
516 dma_unmap_single(
517 &udc->pdev->dev, req->req.dma, req->req.length,
518 ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
519 req->req.dma = DMA_ADDR_INVALID;
520 req->mapped = 0;
521 }
522
523 DBG(DBG_GADGET | DBG_REQ,
524 "%s: req %p complete: status %d, actual %u\n",
525 ep->ep.name, req, req->req.status, req->req.actual);
526
527 spin_unlock(&udc->lock);
528 req->req.complete(&ep->ep, &req->req);
529 spin_lock(&udc->lock);
530}
531
532static void
533request_complete_list(struct usba_ep *ep, struct list_head *list, int status)
534{
535 struct usba_request *req, *tmp_req;
536
537 list_for_each_entry_safe(req, tmp_req, list, queue) {
538 list_del_init(&req->queue);
539 request_complete(ep, req, status);
540 }
541}
542
543static int
544usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
545{
546 struct usba_ep *ep = to_usba_ep(_ep);
547 struct usba_udc *udc = ep->udc;
548 unsigned long flags, ept_cfg, maxpacket;
549 unsigned int nr_trans;
550
551 DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc);
552
553 maxpacket = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff;
554
555 if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index)
556 || ep->index == 0
557 || desc->bDescriptorType != USB_DT_ENDPOINT
558 || maxpacket == 0
559 || maxpacket > ep->fifo_size) {
560 DBG(DBG_ERR, "ep_enable: Invalid argument");
561 return -EINVAL;
562 }
563
564 ep->is_isoc = 0;
565 ep->is_in = 0;
566
567 if (maxpacket <= 8)
568 ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8);
569 else
570 /* LSB is bit 1, not 0 */
571 ept_cfg = USBA_BF(EPT_SIZE, fls(maxpacket - 1) - 3);
572
573 DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
574 ep->ep.name, ept_cfg, maxpacket);
575
576 if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
577 ep->is_in = 1;
578 ept_cfg |= USBA_EPT_DIR_IN;
579 }
580
581 switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
582 case USB_ENDPOINT_XFER_CONTROL:
583 ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
584 ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE);
585 break;
586 case USB_ENDPOINT_XFER_ISOC:
587 if (!ep->can_isoc) {
588 DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
589 ep->ep.name);
590 return -EINVAL;
591 }
592
593 /*
594 * Bits 11:12 specify number of _additional_
595 * transactions per microframe.
596 */
597 nr_trans = ((le16_to_cpu(desc->wMaxPacketSize) >> 11) & 3) + 1;
598 if (nr_trans > 3)
599 return -EINVAL;
600
601 ep->is_isoc = 1;
602 ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO);
603
604 /*
605 * Do triple-buffering on high-bandwidth iso endpoints.
606 */
607 if (nr_trans > 1 && ep->nr_banks == 3)
608 ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_TRIPLE);
609 else
610 ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
611 ept_cfg |= USBA_BF(NB_TRANS, nr_trans);
612 break;
613 case USB_ENDPOINT_XFER_BULK:
614 ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK);
615 ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
616 break;
617 case USB_ENDPOINT_XFER_INT:
618 ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT);
619 ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
620 break;
621 }
622
623 spin_lock_irqsave(&ep->udc->lock, flags);
624
625 if (ep->desc) {
626 spin_unlock_irqrestore(&ep->udc->lock, flags);
627 DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
628 return -EBUSY;
629 }
630
631 ep->desc = desc;
632 ep->ep.maxpacket = maxpacket;
633
634 usba_ep_writel(ep, CFG, ept_cfg);
635 usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
636
637 if (ep->can_dma) {
638 u32 ctrl;
639
640 usba_writel(udc, INT_ENB,
641 (usba_readl(udc, INT_ENB)
642 | USBA_BF(EPT_INT, 1 << ep->index)
643 | USBA_BF(DMA_INT, 1 << ep->index)));
644 ctrl = USBA_AUTO_VALID | USBA_INTDIS_DMA;
645 usba_ep_writel(ep, CTL_ENB, ctrl);
646 } else {
647 usba_writel(udc, INT_ENB,
648 (usba_readl(udc, INT_ENB)
649 | USBA_BF(EPT_INT, 1 << ep->index)));
650 }
651
652 spin_unlock_irqrestore(&udc->lock, flags);
653
654 DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index,
655 (unsigned long)usba_ep_readl(ep, CFG));
656 DBG(DBG_HW, "INT_ENB after init: %#08lx\n",
657 (unsigned long)usba_readl(udc, INT_ENB));
658
659 return 0;
660}
661
662static int usba_ep_disable(struct usb_ep *_ep)
663{
664 struct usba_ep *ep = to_usba_ep(_ep);
665 struct usba_udc *udc = ep->udc;
666 LIST_HEAD(req_list);
667 unsigned long flags;
668
669 DBG(DBG_GADGET, "ep_disable: %s\n", ep->ep.name);
670
671 spin_lock_irqsave(&udc->lock, flags);
672
673 if (!ep->desc) {
674 spin_unlock_irqrestore(&udc->lock, flags);
675 DBG(DBG_ERR, "ep_disable: %s not enabled\n", ep->ep.name);
676 return -EINVAL;
677 }
678 ep->desc = NULL;
679
680 list_splice_init(&ep->queue, &req_list);
681 if (ep->can_dma) {
682 usba_dma_writel(ep, CONTROL, 0);
683 usba_dma_writel(ep, ADDRESS, 0);
684 usba_dma_readl(ep, STATUS);
685 }
686 usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE);
687 usba_writel(udc, INT_ENB,
688 usba_readl(udc, INT_ENB)
689 & ~USBA_BF(EPT_INT, 1 << ep->index));
690
691 request_complete_list(ep, &req_list, -ESHUTDOWN);
692
693 spin_unlock_irqrestore(&udc->lock, flags);
694
695 return 0;
696}
697
698static struct usb_request *
699usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
700{
701 struct usba_request *req;
702
703 DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags);
704
705 req = kzalloc(sizeof(*req), gfp_flags);
706 if (!req)
707 return NULL;
708
709 INIT_LIST_HEAD(&req->queue);
710 req->req.dma = DMA_ADDR_INVALID;
711
712 return &req->req;
713}
714
715static void
716usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
717{
718 struct usba_request *req = to_usba_req(_req);
719
720 DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req);
721
722 kfree(req);
723}
724
725static int queue_dma(struct usba_udc *udc, struct usba_ep *ep,
726 struct usba_request *req, gfp_t gfp_flags)
727{
728 unsigned long flags;
729 int ret;
730
731 DBG(DBG_DMA, "%s: req l/%u d/%08x %c%c%c\n",
732 ep->ep.name, req->req.length, req->req.dma,
733 req->req.zero ? 'Z' : 'z',
734 req->req.short_not_ok ? 'S' : 's',
735 req->req.no_interrupt ? 'I' : 'i');
736
737 if (req->req.length > 0x10000) {
738 /* Lengths from 0 to 65536 (inclusive) are supported */
739 DBG(DBG_ERR, "invalid request length %u\n", req->req.length);
740 return -EINVAL;
741 }
742
743 req->using_dma = 1;
744
745 if (req->req.dma == DMA_ADDR_INVALID) {
746 req->req.dma = dma_map_single(
747 &udc->pdev->dev, req->req.buf, req->req.length,
748 ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
749 req->mapped = 1;
750 } else {
751 dma_sync_single_for_device(
752 &udc->pdev->dev, req->req.dma, req->req.length,
753 ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
754 req->mapped = 0;
755 }
756
757 req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length)
758 | USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE
759 | USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE;
760
761 if (ep->is_in)
762 req->ctrl |= USBA_DMA_END_BUF_EN;
763
764 /*
765 * Add this request to the queue and submit for DMA if
766 * possible. Check if we're still alive first -- we may have
767 * received a reset since last time we checked.
768 */
769 ret = -ESHUTDOWN;
770 spin_lock_irqsave(&udc->lock, flags);
771 if (ep->desc) {
772 if (list_empty(&ep->queue))
773 submit_request(ep, req);
774
775 list_add_tail(&req->queue, &ep->queue);
776 ret = 0;
777 }
778 spin_unlock_irqrestore(&udc->lock, flags);
779
780 return ret;
781}
782
783static int
784usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
785{
786 struct usba_request *req = to_usba_req(_req);
787 struct usba_ep *ep = to_usba_ep(_ep);
788 struct usba_udc *udc = ep->udc;
789 unsigned long flags;
790 int ret;
791
792 DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n",
793 ep->ep.name, req, _req->length);
794
795 if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || !ep->desc)
796 return -ESHUTDOWN;
797
798 req->submitted = 0;
799 req->using_dma = 0;
800 req->last_transaction = 0;
801
802 _req->status = -EINPROGRESS;
803 _req->actual = 0;
804
805 if (ep->can_dma)
806 return queue_dma(udc, ep, req, gfp_flags);
807
808 /* May have received a reset since last time we checked */
809 ret = -ESHUTDOWN;
810 spin_lock_irqsave(&udc->lock, flags);
811 if (ep->desc) {
812 list_add_tail(&req->queue, &ep->queue);
813
814 if (ep->is_in || (ep_is_control(ep)
815 && (ep->state == DATA_STAGE_IN
816 || ep->state == STATUS_STAGE_IN)))
817 usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
818 else
819 usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
820 ret = 0;
821 }
822 spin_unlock_irqrestore(&udc->lock, flags);
823
824 return ret;
825}
826
827static void
828usba_update_req(struct usba_ep *ep, struct usba_request *req, u32 status)
829{
830 req->req.actual = req->req.length - USBA_BFEXT(DMA_BUF_LEN, status);
831}
832
833static int stop_dma(struct usba_ep *ep, u32 *pstatus)
834{
835 unsigned int timeout;
836 u32 status;
837
838 /*
839 * Stop the DMA controller. When writing both CH_EN
840 * and LINK to 0, the other bits are not affected.
841 */
842 usba_dma_writel(ep, CONTROL, 0);
843
844 /* Wait for the FIFO to empty */
845 for (timeout = 40; timeout; --timeout) {
846 status = usba_dma_readl(ep, STATUS);
847 if (!(status & USBA_DMA_CH_EN))
848 break;
849 udelay(1);
850 }
851
852 if (pstatus)
853 *pstatus = status;
854
855 if (timeout == 0) {
856 dev_err(&ep->udc->pdev->dev,
857 "%s: timed out waiting for DMA FIFO to empty\n",
858 ep->ep.name);
859 return -ETIMEDOUT;
860 }
861
862 return 0;
863}
864
865static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
866{
867 struct usba_ep *ep = to_usba_ep(_ep);
868 struct usba_udc *udc = ep->udc;
869 struct usba_request *req = to_usba_req(_req);
870 unsigned long flags;
871 u32 status;
872
873 DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n",
874 ep->ep.name, req);
875
876 spin_lock_irqsave(&udc->lock, flags);
877
878 if (req->using_dma) {
879 /*
880 * If this request is currently being transferred,
881 * stop the DMA controller and reset the FIFO.
882 */
883 if (ep->queue.next == &req->queue) {
884 status = usba_dma_readl(ep, STATUS);
885 if (status & USBA_DMA_CH_EN)
886 stop_dma(ep, &status);
887
888#ifdef CONFIG_USB_GADGET_DEBUG_FS
889 ep->last_dma_status = status;
890#endif
891
892 usba_writel(udc, EPT_RST, 1 << ep->index);
893
894 usba_update_req(ep, req, status);
895 }
896 }
897
898 /*
899 * Errors should stop the queue from advancing until the
900 * completion function returns.
901 */
902 list_del_init(&req->queue);
903
904 request_complete(ep, req, -ECONNRESET);
905
906 /* Process the next request if any */
907 submit_next_request(ep);
908 spin_unlock_irqrestore(&udc->lock, flags);
909
910 return 0;
911}
912
913static int usba_ep_set_halt(struct usb_ep *_ep, int value)
914{
915 struct usba_ep *ep = to_usba_ep(_ep);
916 struct usba_udc *udc = ep->udc;
917 unsigned long flags;
918 int ret = 0;
919
920 DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name,
921 value ? "set" : "clear");
922
923 if (!ep->desc) {
924 DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
925 ep->ep.name);
926 return -ENODEV;
927 }
928 if (ep->is_isoc) {
929 DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
930 ep->ep.name);
931 return -ENOTTY;
932 }
933
934 spin_lock_irqsave(&udc->lock, flags);
935
936 /*
937 * We can't halt IN endpoints while there are still data to be
938 * transferred
939 */
940 if (!list_empty(&ep->queue)
941 || ((value && ep->is_in && (usba_ep_readl(ep, STA)
942 & USBA_BF(BUSY_BANKS, -1L))))) {
943 ret = -EAGAIN;
944 } else {
945 if (value)
946 usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
947 else
948 usba_ep_writel(ep, CLR_STA,
949 USBA_FORCE_STALL | USBA_TOGGLE_CLR);
950 usba_ep_readl(ep, STA);
951 }
952
953 spin_unlock_irqrestore(&udc->lock, flags);
954
955 return ret;
956}
957
958static int usba_ep_fifo_status(struct usb_ep *_ep)
959{
960 struct usba_ep *ep = to_usba_ep(_ep);
961
962 return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
963}
964
965static void usba_ep_fifo_flush(struct usb_ep *_ep)
966{
967 struct usba_ep *ep = to_usba_ep(_ep);
968 struct usba_udc *udc = ep->udc;
969
970 usba_writel(udc, EPT_RST, 1 << ep->index);
971}
972
973static const struct usb_ep_ops usba_ep_ops = {
974 .enable = usba_ep_enable,
975 .disable = usba_ep_disable,
976 .alloc_request = usba_ep_alloc_request,
977 .free_request = usba_ep_free_request,
978 .queue = usba_ep_queue,
979 .dequeue = usba_ep_dequeue,
980 .set_halt = usba_ep_set_halt,
981 .fifo_status = usba_ep_fifo_status,
982 .fifo_flush = usba_ep_fifo_flush,
983};
984
985static int usba_udc_get_frame(struct usb_gadget *gadget)
986{
987 struct usba_udc *udc = to_usba_udc(gadget);
988
989 return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM));
990}
991
992static const struct usb_gadget_ops usba_udc_ops = {
993 .get_frame = usba_udc_get_frame,
994};
995
996#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
997{ \
998 .ep = { \
999 .ops = &usba_ep_ops, \
1000 .name = nam, \
1001 .maxpacket = maxpkt, \
1002 }, \
1003 .udc = &the_udc, \
1004 .queue = LIST_HEAD_INIT(usba_ep[idx].queue), \
1005 .fifo_size = maxpkt, \
1006 .nr_banks = maxbk, \
1007 .index = idx, \
1008 .can_dma = dma, \
1009 .can_isoc = isoc, \
1010}
1011
1012static struct usba_ep usba_ep[] = {
1013 EP("ep0", 0, 64, 1, 0, 0),
1014 EP("ep1in-bulk", 1, 512, 2, 1, 1),
1015 EP("ep2out-bulk", 2, 512, 2, 1, 1),
1016 EP("ep3in-int", 3, 64, 3, 1, 0),
1017 EP("ep4out-int", 4, 64, 3, 1, 0),
1018 EP("ep5in-iso", 5, 1024, 3, 1, 1),
1019 EP("ep6out-iso", 6, 1024, 3, 1, 1),
1020};
1021#undef EP
1022
1023static struct usb_endpoint_descriptor usba_ep0_desc = {
1024 .bLength = USB_DT_ENDPOINT_SIZE,
1025 .bDescriptorType = USB_DT_ENDPOINT,
1026 .bEndpointAddress = 0,
1027 .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
1028 .wMaxPacketSize = __constant_cpu_to_le16(64),
1029 /* FIXME: I have no idea what to put here */
1030 .bInterval = 1,
1031};
1032
1033static void nop_release(struct device *dev)
1034{
1035
1036}
1037
1038static struct usba_udc the_udc = {
1039 .gadget = {
1040 .ops = &usba_udc_ops,
1041 .ep0 = &usba_ep[0].ep,
1042 .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
1043 .is_dualspeed = 1,
1044 .name = "atmel_usba_udc",
1045 .dev = {
1046 .bus_id = "gadget",
1047 .release = nop_release,
1048 },
1049 },
1050
1051 .lock = SPIN_LOCK_UNLOCKED,
1052};
1053
1054/*
1055 * Called with interrupts disabled and udc->lock held.
1056 */
1057static void reset_all_endpoints(struct usba_udc *udc)
1058{
1059 struct usba_ep *ep;
1060 struct usba_request *req, *tmp_req;
1061
1062 usba_writel(udc, EPT_RST, ~0UL);
1063
1064 ep = to_usba_ep(udc->gadget.ep0);
1065 list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) {
1066 list_del_init(&req->queue);
1067 request_complete(ep, req, -ECONNRESET);
1068 }
1069
1070 list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
1071 if (ep->desc)
1072 usba_ep_disable(&ep->ep);
1073 }
1074}
1075
1076static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex)
1077{
1078 struct usba_ep *ep;
1079
1080 if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
1081 return to_usba_ep(udc->gadget.ep0);
1082
1083 list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
1084 u8 bEndpointAddress;
1085
1086 if (!ep->desc)
1087 continue;
1088 bEndpointAddress = ep->desc->bEndpointAddress;
1089 if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
1090 continue;
1091 if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
1092 == (wIndex & USB_ENDPOINT_NUMBER_MASK))
1093 return ep;
1094 }
1095
1096 return NULL;
1097}
1098
1099/* Called with interrupts disabled and udc->lock held */
1100static inline void set_protocol_stall(struct usba_udc *udc, struct usba_ep *ep)
1101{
1102 usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
1103 ep->state = WAIT_FOR_SETUP;
1104}
1105
1106static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep)
1107{
1108 if (usba_ep_readl(ep, STA) & USBA_FORCE_STALL)
1109 return 1;
1110 return 0;
1111}
1112
1113static inline void set_address(struct usba_udc *udc, unsigned int addr)
1114{
1115 u32 regval;
1116
1117 DBG(DBG_BUS, "setting address %u...\n", addr);
1118 regval = usba_readl(udc, CTRL);
1119 regval = USBA_BFINS(DEV_ADDR, addr, regval);
1120 usba_writel(udc, CTRL, regval);
1121}
1122
1123static int do_test_mode(struct usba_udc *udc)
1124{
1125 static const char test_packet_buffer[] = {
1126 /* JKJKJKJK * 9 */
1127 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
1128 /* JJKKJJKK * 8 */
1129 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
1130 /* JJKKJJKK * 8 */
1131 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
1132 /* JJJJJJJKKKKKKK * 8 */
1133 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
1134 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
1135 /* JJJJJJJK * 8 */
1136 0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
1137 /* {JKKKKKKK * 10}, JK */
1138 0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E
1139 };
1140 struct usba_ep *ep;
1141 struct device *dev = &udc->pdev->dev;
1142 int test_mode;
1143
1144 test_mode = udc->test_mode;
1145
1146 /* Start from a clean slate */
1147 reset_all_endpoints(udc);
1148
1149 switch (test_mode) {
1150 case 0x0100:
1151 /* Test_J */
1152 usba_writel(udc, TST, USBA_TST_J_MODE);
1153 dev_info(dev, "Entering Test_J mode...\n");
1154 break;
1155 case 0x0200:
1156 /* Test_K */
1157 usba_writel(udc, TST, USBA_TST_K_MODE);
1158 dev_info(dev, "Entering Test_K mode...\n");
1159 break;
1160 case 0x0300:
1161 /*
1162 * Test_SE0_NAK: Force high-speed mode and set up ep0
1163 * for Bulk IN transfers
1164 */
1165 ep = &usba_ep[0];
1166 usba_writel(udc, TST,
1167 USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH));
1168 usba_ep_writel(ep, CFG,
1169 USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
1170 | USBA_EPT_DIR_IN
1171 | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
1172 | USBA_BF(BK_NUMBER, 1));
1173 if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
1174 set_protocol_stall(udc, ep);
1175 dev_err(dev, "Test_SE0_NAK: ep0 not mapped\n");
1176 } else {
1177 usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
1178 dev_info(dev, "Entering Test_SE0_NAK mode...\n");
1179 }
1180 break;
1181 case 0x0400:
1182 /* Test_Packet */
1183 ep = &usba_ep[0];
1184 usba_ep_writel(ep, CFG,
1185 USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
1186 | USBA_EPT_DIR_IN
1187 | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
1188 | USBA_BF(BK_NUMBER, 1));
1189 if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
1190 set_protocol_stall(udc, ep);
1191 dev_err(dev, "Test_Packet: ep0 not mapped\n");
1192 } else {
1193 usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
1194 usba_writel(udc, TST, USBA_TST_PKT_MODE);
1195 copy_to_fifo(ep->fifo, test_packet_buffer,
1196 sizeof(test_packet_buffer));
1197 usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
1198 dev_info(dev, "Entering Test_Packet mode...\n");
1199 }
1200 break;
1201 default:
1202 dev_err(dev, "Invalid test mode: 0x%04x\n", test_mode);
1203 return -EINVAL;
1204 }
1205
1206 return 0;
1207}
1208
1209/* Avoid overly long expressions */
1210static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq)
1211{
1212 if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
1213 return true;
1214 return false;
1215}
1216
1217static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq)
1218{
1219 if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_TEST_MODE))
1220 return true;
1221 return false;
1222}
1223
1224static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
1225{
1226 if (crq->wValue == __constant_cpu_to_le16(USB_ENDPOINT_HALT))
1227 return true;
1228 return false;
1229}
1230
1231static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
1232 struct usb_ctrlrequest *crq)
1233{
1234 int retval = 0;;
1235
1236 switch (crq->bRequest) {
1237 case USB_REQ_GET_STATUS: {
1238 u16 status;
1239
1240 if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
1241 /* Self-powered, no remote wakeup */
1242 status = __constant_cpu_to_le16(1 << 0);
1243 } else if (crq->bRequestType
1244 == (USB_DIR_IN | USB_RECIP_INTERFACE)) {
1245 status = __constant_cpu_to_le16(0);
1246 } else if (crq->bRequestType
1247 == (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
1248 struct usba_ep *target;
1249
1250 target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
1251 if (!target)
1252 goto stall;
1253
1254 status = 0;
1255 if (is_stalled(udc, target))
1256 status |= __constant_cpu_to_le16(1);
1257 } else
1258 goto delegate;
1259
1260 /* Write directly to the FIFO. No queueing is done. */
1261 if (crq->wLength != __constant_cpu_to_le16(sizeof(status)))
1262 goto stall;
1263 ep->state = DATA_STAGE_IN;
1264 __raw_writew(status, ep->fifo);
1265 usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
1266 break;
1267 }
1268
1269 case USB_REQ_CLEAR_FEATURE: {
1270 if (crq->bRequestType == USB_RECIP_DEVICE) {
1271 if (feature_is_dev_remote_wakeup(crq)) {
1272 /* TODO: Handle REMOTE_WAKEUP */
1273 } else {
1274 /* Can't CLEAR_FEATURE TEST_MODE */
1275 goto stall;
1276 }
1277 } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
1278 struct usba_ep *target;
1279
1280 if (crq->wLength != __constant_cpu_to_le16(0)
1281 || !feature_is_ep_halt(crq))
1282 goto stall;
1283 target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
1284 if (!target)
1285 goto stall;
1286
1287 usba_ep_writel(target, CLR_STA, USBA_FORCE_STALL);
1288 if (target->index != 0)
1289 usba_ep_writel(target, CLR_STA,
1290 USBA_TOGGLE_CLR);
1291 } else {
1292 goto delegate;
1293 }
1294
1295 send_status(udc, ep);
1296 break;
1297 }
1298
1299 case USB_REQ_SET_FEATURE: {
1300 if (crq->bRequestType == USB_RECIP_DEVICE) {
1301 if (feature_is_dev_test_mode(crq)) {
1302 send_status(udc, ep);
1303 ep->state = STATUS_STAGE_TEST;
1304 udc->test_mode = le16_to_cpu(crq->wIndex);
1305 return 0;
1306 } else if (feature_is_dev_remote_wakeup(crq)) {
1307 /* TODO: Handle REMOTE_WAKEUP */
1308 } else {
1309 goto stall;
1310 }
1311 } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
1312 struct usba_ep *target;
1313
1314 if (crq->wLength != __constant_cpu_to_le16(0)
1315 || !feature_is_ep_halt(crq))
1316 goto stall;
1317
1318 target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
1319 if (!target)
1320 goto stall;
1321
1322 usba_ep_writel(target, SET_STA, USBA_FORCE_STALL);
1323 } else
1324 goto delegate;
1325
1326 send_status(udc, ep);
1327 break;
1328 }
1329
1330 case USB_REQ_SET_ADDRESS:
1331 if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
1332 goto delegate;
1333
1334 set_address(udc, le16_to_cpu(crq->wValue));
1335 send_status(udc, ep);
1336 ep->state = STATUS_STAGE_ADDR;
1337 break;
1338
1339 default:
1340delegate:
1341 spin_unlock(&udc->lock);
1342 retval = udc->driver->setup(&udc->gadget, crq);
1343 spin_lock(&udc->lock);
1344 }
1345
1346 return retval;
1347
1348stall:
1349 printk(KERN_ERR
1350 "udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, "
1351 "halting endpoint...\n",
1352 ep->ep.name, crq->bRequestType, crq->bRequest,
1353 le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
1354 le16_to_cpu(crq->wLength));
1355 set_protocol_stall(udc, ep);
1356 return -1;
1357}
1358
1359static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep)
1360{
1361 struct usba_request *req;
1362 u32 epstatus;
1363 u32 epctrl;
1364
1365restart:
1366 epstatus = usba_ep_readl(ep, STA);
1367 epctrl = usba_ep_readl(ep, CTL);
1368
1369 DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n",
1370 ep->ep.name, ep->state, epstatus, epctrl);
1371
1372 req = NULL;
1373 if (!list_empty(&ep->queue))
1374 req = list_entry(ep->queue.next,
1375 struct usba_request, queue);
1376
1377 if ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
1378 if (req->submitted)
1379 next_fifo_transaction(ep, req);
1380 else
1381 submit_request(ep, req);
1382
1383 if (req->last_transaction) {
1384 usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
1385 usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
1386 }
1387 goto restart;
1388 }
1389 if ((epstatus & epctrl) & USBA_TX_COMPLETE) {
1390 usba_ep_writel(ep, CLR_STA, USBA_TX_COMPLETE);
1391
1392 switch (ep->state) {
1393 case DATA_STAGE_IN:
1394 usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
1395 usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
1396 ep->state = STATUS_STAGE_OUT;
1397 break;
1398 case STATUS_STAGE_ADDR:
1399 /* Activate our new address */
1400 usba_writel(udc, CTRL, (usba_readl(udc, CTRL)
1401 | USBA_FADDR_EN));
1402 usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
1403 ep->state = WAIT_FOR_SETUP;
1404 break;
1405 case STATUS_STAGE_IN:
1406 if (req) {
1407 list_del_init(&req->queue);
1408 request_complete(ep, req, 0);
1409 submit_next_request(ep);
1410 }
1411 usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
1412 ep->state = WAIT_FOR_SETUP;
1413 break;
1414 case STATUS_STAGE_TEST:
1415 usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
1416 ep->state = WAIT_FOR_SETUP;
1417 if (do_test_mode(udc))
1418 set_protocol_stall(udc, ep);
1419 break;
1420 default:
1421 printk(KERN_ERR
1422 "udc: %s: TXCOMP: Invalid endpoint state %d, "
1423 "halting endpoint...\n",
1424 ep->ep.name, ep->state);
1425 set_protocol_stall(udc, ep);
1426 break;
1427 }
1428
1429 goto restart;
1430 }
1431 if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
1432 switch (ep->state) {
1433 case STATUS_STAGE_OUT:
1434 usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
1435 usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
1436
1437 if (req) {
1438 list_del_init(&req->queue);
1439 request_complete(ep, req, 0);
1440 }
1441 ep->state = WAIT_FOR_SETUP;
1442 break;
1443
1444 case DATA_STAGE_OUT:
1445 receive_data(ep);
1446 break;
1447
1448 default:
1449 usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
1450 usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
1451 printk(KERN_ERR
1452 "udc: %s: RXRDY: Invalid endpoint state %d, "
1453 "halting endpoint...\n",
1454 ep->ep.name, ep->state);
1455 set_protocol_stall(udc, ep);
1456 break;
1457 }
1458
1459 goto restart;
1460 }
1461 if (epstatus & USBA_RX_SETUP) {
1462 union {
1463 struct usb_ctrlrequest crq;
1464 unsigned long data[2];
1465 } crq;
1466 unsigned int pkt_len;
1467 int ret;
1468
1469 if (ep->state != WAIT_FOR_SETUP) {
1470 /*
1471 * Didn't expect a SETUP packet at this
1472 * point. Clean up any pending requests (which
1473 * may be successful).
1474 */
1475 int status = -EPROTO;
1476
1477 /*
1478 * RXRDY and TXCOMP are dropped when SETUP
1479 * packets arrive. Just pretend we received
1480 * the status packet.
1481 */
1482 if (ep->state == STATUS_STAGE_OUT
1483 || ep->state == STATUS_STAGE_IN) {
1484 usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
1485 status = 0;
1486 }
1487
1488 if (req) {
1489 list_del_init(&req->queue);
1490 request_complete(ep, req, status);
1491 }
1492 }
1493
1494 pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
1495 DBG(DBG_HW, "Packet length: %u\n", pkt_len);
1496 if (pkt_len != sizeof(crq)) {
1497 printk(KERN_WARNING "udc: Invalid packet length %u "
1498 "(expected %lu)\n", pkt_len, sizeof(crq));
1499 set_protocol_stall(udc, ep);
1500 return;
1501 }
1502
1503 DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
1504 copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
1505
1506 /* Free up one bank in the FIFO so that we can
1507 * generate or receive a reply right away. */
1508 usba_ep_writel(ep, CLR_STA, USBA_RX_SETUP);
1509
1510 /* printk(KERN_DEBUG "setup: %d: %02x.%02x\n",
1511 ep->state, crq.crq.bRequestType,
1512 crq.crq.bRequest); */
1513
1514 if (crq.crq.bRequestType & USB_DIR_IN) {
1515 /*
1516 * The USB 2.0 spec states that "if wLength is
1517 * zero, there is no data transfer phase."
1518 * However, testusb #14 seems to actually
1519 * expect a data phase even if wLength = 0...
1520 */
1521 ep->state = DATA_STAGE_IN;
1522 } else {
1523 if (crq.crq.wLength != __constant_cpu_to_le16(0))
1524 ep->state = DATA_STAGE_OUT;
1525 else
1526 ep->state = STATUS_STAGE_IN;
1527 }
1528
1529 ret = -1;
1530 if (ep->index == 0)
1531 ret = handle_ep0_setup(udc, ep, &crq.crq);
1532 else {
1533 spin_unlock(&udc->lock);
1534 ret = udc->driver->setup(&udc->gadget, &crq.crq);
1535 spin_lock(&udc->lock);
1536 }
1537
1538 DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
1539 crq.crq.bRequestType, crq.crq.bRequest,
1540 le16_to_cpu(crq.crq.wLength), ep->state, ret);
1541
1542 if (ret < 0) {
1543 /* Let the host know that we failed */
1544 set_protocol_stall(udc, ep);
1545 }
1546 }
1547}
1548
1549static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep)
1550{
1551 struct usba_request *req;
1552 u32 epstatus;
1553 u32 epctrl;
1554
1555 epstatus = usba_ep_readl(ep, STA);
1556 epctrl = usba_ep_readl(ep, CTL);
1557
1558 DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n", ep->ep.name, epstatus);
1559
1560 while ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
1561 DBG(DBG_BUS, "%s: TX PK ready\n", ep->ep.name);
1562
1563 if (list_empty(&ep->queue)) {
1564 dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n");
1565 usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
1566 return;
1567 }
1568
1569 req = list_entry(ep->queue.next, struct usba_request, queue);
1570
1571 if (req->using_dma) {
1572 /* Send a zero-length packet */
1573 usba_ep_writel(ep, SET_STA,
1574 USBA_TX_PK_RDY);
1575 usba_ep_writel(ep, CTL_DIS,
1576 USBA_TX_PK_RDY);
1577 list_del_init(&req->queue);
1578 submit_next_request(ep);
1579 request_complete(ep, req, 0);
1580 } else {
1581 if (req->submitted)
1582 next_fifo_transaction(ep, req);
1583 else
1584 submit_request(ep, req);
1585
1586 if (req->last_transaction) {
1587 list_del_init(&req->queue);
1588 submit_next_request(ep);
1589 request_complete(ep, req, 0);
1590 }
1591 }
1592
1593 epstatus = usba_ep_readl(ep, STA);
1594 epctrl = usba_ep_readl(ep, CTL);
1595 }
1596 if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
1597 DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name);
1598 receive_data(ep);
1599 usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
1600 }
1601}
1602
1603static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep)
1604{
1605 struct usba_request *req;
1606 u32 status, control, pending;
1607
1608 status = usba_dma_readl(ep, STATUS);
1609 control = usba_dma_readl(ep, CONTROL);
1610#ifdef CONFIG_USB_GADGET_DEBUG_FS
1611 ep->last_dma_status = status;
1612#endif
1613 pending = status & control;
1614 DBG(DBG_INT | DBG_DMA, "dma irq, s/%#08x, c/%#08x\n", status, control);
1615
1616 if (status & USBA_DMA_CH_EN) {
1617 dev_err(&udc->pdev->dev,
1618 "DMA_CH_EN is set after transfer is finished!\n");
1619 dev_err(&udc->pdev->dev,
1620 "status=%#08x, pending=%#08x, control=%#08x\n",
1621 status, pending, control);
1622
1623 /*
1624 * try to pretend nothing happened. We might have to
1625 * do something here...
1626 */
1627 }
1628
1629 if (list_empty(&ep->queue))
1630 /* Might happen if a reset comes along at the right moment */
1631 return;
1632
1633 if (pending & (USBA_DMA_END_TR_ST | USBA_DMA_END_BUF_ST)) {
1634 req = list_entry(ep->queue.next, struct usba_request, queue);
1635 usba_update_req(ep, req, status);
1636
1637 list_del_init(&req->queue);
1638 submit_next_request(ep);
1639 request_complete(ep, req, 0);
1640 }
1641}
1642
1643static irqreturn_t usba_udc_irq(int irq, void *devid)
1644{
1645 struct usba_udc *udc = devid;
1646 u32 status;
1647 u32 dma_status;
1648 u32 ep_status;
1649
1650 spin_lock(&udc->lock);
1651
1652 status = usba_readl(udc, INT_STA);
1653 DBG(DBG_INT, "irq, status=%#08x\n", status);
1654
1655 if (status & USBA_DET_SUSPEND) {
1656 usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
1657 DBG(DBG_BUS, "Suspend detected\n");
1658 if (udc->gadget.speed != USB_SPEED_UNKNOWN
1659 && udc->driver && udc->driver->suspend) {
1660 spin_unlock(&udc->lock);
1661 udc->driver->suspend(&udc->gadget);
1662 spin_lock(&udc->lock);
1663 }
1664 }
1665
1666 if (status & USBA_WAKE_UP) {
1667 usba_writel(udc, INT_CLR, USBA_WAKE_UP);
1668 DBG(DBG_BUS, "Wake Up CPU detected\n");
1669 }
1670
1671 if (status & USBA_END_OF_RESUME) {
1672 usba_writel(udc, INT_CLR, USBA_END_OF_RESUME);
1673 DBG(DBG_BUS, "Resume detected\n");
1674 if (udc->gadget.speed != USB_SPEED_UNKNOWN
1675 && udc->driver && udc->driver->resume) {
1676 spin_unlock(&udc->lock);
1677 udc->driver->resume(&udc->gadget);
1678 spin_lock(&udc->lock);
1679 }
1680 }
1681
1682 dma_status = USBA_BFEXT(DMA_INT, status);
1683 if (dma_status) {
1684 int i;
1685
1686 for (i = 1; i < USBA_NR_ENDPOINTS; i++)
1687 if (dma_status & (1 << i))
1688 usba_dma_irq(udc, &usba_ep[i]);
1689 }
1690
1691 ep_status = USBA_BFEXT(EPT_INT, status);
1692 if (ep_status) {
1693 int i;
1694
1695 for (i = 0; i < USBA_NR_ENDPOINTS; i++)
1696 if (ep_status & (1 << i)) {
1697 if (ep_is_control(&usba_ep[i]))
1698 usba_control_irq(udc, &usba_ep[i]);
1699 else
1700 usba_ep_irq(udc, &usba_ep[i]);
1701 }
1702 }
1703
1704 if (status & USBA_END_OF_RESET) {
1705 struct usba_ep *ep0;
1706
1707 usba_writel(udc, INT_CLR, USBA_END_OF_RESET);
1708 reset_all_endpoints(udc);
1709
1710 if (status & USBA_HIGH_SPEED) {
1711 DBG(DBG_BUS, "High-speed bus reset detected\n");
1712 udc->gadget.speed = USB_SPEED_HIGH;
1713 } else {
1714 DBG(DBG_BUS, "Full-speed bus reset detected\n");
1715 udc->gadget.speed = USB_SPEED_FULL;
1716 }
1717
1718 ep0 = &usba_ep[0];
1719 ep0->desc = &usba_ep0_desc;
1720 ep0->state = WAIT_FOR_SETUP;
1721 usba_ep_writel(ep0, CFG,
1722 (USBA_BF(EPT_SIZE, EP0_EPT_SIZE)
1723 | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL)
1724 | USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
1725 usba_ep_writel(ep0, CTL_ENB,
1726 USBA_EPT_ENABLE | USBA_RX_SETUP);
1727 usba_writel(udc, INT_ENB,
1728 (usba_readl(udc, INT_ENB)
1729 | USBA_BF(EPT_INT, 1)
1730 | USBA_DET_SUSPEND
1731 | USBA_END_OF_RESUME));
1732
1733 if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED))
1734 dev_warn(&udc->pdev->dev,
1735 "WARNING: EP0 configuration is invalid!\n");
1736 }
1737
1738 spin_unlock(&udc->lock);
1739
1740 return IRQ_HANDLED;
1741}
1742
1743static irqreturn_t usba_vbus_irq(int irq, void *devid)
1744{
1745 struct usba_udc *udc = devid;
1746 int vbus;
1747
1748 /* debounce */
1749 udelay(10);
1750
1751 spin_lock(&udc->lock);
1752
1753 /* May happen if Vbus pin toggles during probe() */
1754 if (!udc->driver)
1755 goto out;
1756
1757 vbus = gpio_get_value(udc->vbus_pin);
1758 if (vbus != udc->vbus_prev) {
1759 if (vbus) {
1760 usba_writel(udc, CTRL, USBA_EN_USBA);
1761 usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
1762 } else {
1763 udc->gadget.speed = USB_SPEED_UNKNOWN;
1764 reset_all_endpoints(udc);
1765 usba_writel(udc, CTRL, 0);
1766 spin_unlock(&udc->lock);
1767 udc->driver->disconnect(&udc->gadget);
1768 spin_lock(&udc->lock);
1769 }
1770 udc->vbus_prev = vbus;
1771 }
1772
1773out:
1774 spin_unlock(&udc->lock);
1775
1776 return IRQ_HANDLED;
1777}
1778
1779int usb_gadget_register_driver(struct usb_gadget_driver *driver)
1780{
1781 struct usba_udc *udc = &the_udc;
1782 unsigned long flags;
1783 int ret;
1784
1785 if (!udc->pdev)
1786 return -ENODEV;
1787
1788 spin_lock_irqsave(&udc->lock, flags);
1789 if (udc->driver) {
1790 spin_unlock_irqrestore(&udc->lock, flags);
1791 return -EBUSY;
1792 }
1793
1794 udc->driver = driver;
1795 udc->gadget.dev.driver = &driver->driver;
1796 spin_unlock_irqrestore(&udc->lock, flags);
1797
1798 clk_enable(udc->pclk);
1799 clk_enable(udc->hclk);
1800
1801 ret = driver->bind(&udc->gadget);
1802 if (ret) {
1803 DBG(DBG_ERR, "Could not bind to driver %s: error %d\n",
1804 driver->driver.name, ret);
1805 goto err_driver_bind;
1806 }
1807
1808 DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
1809
1810 udc->vbus_prev = 0;
1811 if (udc->vbus_pin != -1)
1812 enable_irq(gpio_to_irq(udc->vbus_pin));
1813
1814 /* If Vbus is present, enable the controller and wait for reset */
1815 spin_lock_irqsave(&udc->lock, flags);
1816 if (vbus_is_present(udc) && udc->vbus_prev == 0) {
1817 usba_writel(udc, CTRL, USBA_EN_USBA);
1818 usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
1819 }
1820 spin_unlock_irqrestore(&udc->lock, flags);
1821
1822 return 0;
1823
1824err_driver_bind:
1825 udc->driver = NULL;
1826 udc->gadget.dev.driver = NULL;
1827 return ret;
1828}
1829EXPORT_SYMBOL(usb_gadget_register_driver);
1830
1831int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
1832{
1833 struct usba_udc *udc = &the_udc;
1834 unsigned long flags;
1835
1836 if (!udc->pdev)
1837 return -ENODEV;
1838 if (driver != udc->driver)
1839 return -EINVAL;
1840
1841 if (udc->vbus_pin != -1)
1842 disable_irq(gpio_to_irq(udc->vbus_pin));
1843
1844 spin_lock_irqsave(&udc->lock, flags);
1845 udc->gadget.speed = USB_SPEED_UNKNOWN;
1846 reset_all_endpoints(udc);
1847 spin_unlock_irqrestore(&udc->lock, flags);
1848
1849 /* This will also disable the DP pullup */
1850 usba_writel(udc, CTRL, 0);
1851
1852 driver->unbind(&udc->gadget);
1853 udc->gadget.dev.driver = NULL;
1854 udc->driver = NULL;
1855
1856 clk_disable(udc->hclk);
1857 clk_disable(udc->pclk);
1858
1859 DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name);
1860
1861 return 0;
1862}
1863EXPORT_SYMBOL(usb_gadget_unregister_driver);
1864
1865static int __init usba_udc_probe(struct platform_device *pdev)
1866{
1867 struct usba_platform_data *pdata = pdev->dev.platform_data;
1868 struct resource *regs, *fifo;
1869 struct clk *pclk, *hclk;
1870 struct usba_udc *udc = &the_udc;
1871 int irq, ret, i;
1872
1873 regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
1874 fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
1875 if (!regs || !fifo)
1876 return -ENXIO;
1877
1878 irq = platform_get_irq(pdev, 0);
1879 if (irq < 0)
1880 return irq;
1881
1882 pclk = clk_get(&pdev->dev, "pclk");
1883 if (IS_ERR(pclk))
1884 return PTR_ERR(pclk);
1885 hclk = clk_get(&pdev->dev, "hclk");
1886 if (IS_ERR(hclk)) {
1887 ret = PTR_ERR(hclk);
1888 goto err_get_hclk;
1889 }
1890
1891 udc->pdev = pdev;
1892 udc->pclk = pclk;
1893 udc->hclk = hclk;
1894 udc->vbus_pin = -1;
1895
1896 ret = -ENOMEM;
1897 udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
1898 if (!udc->regs) {
1899 dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
1900 goto err_map_regs;
1901 }
1902 dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
1903 (unsigned long)regs->start, udc->regs);
1904 udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
1905 if (!udc->fifo) {
1906 dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
1907 goto err_map_fifo;
1908 }
1909 dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
1910 (unsigned long)fifo->start, udc->fifo);
1911
1912 device_initialize(&udc->gadget.dev);
1913 udc->gadget.dev.parent = &pdev->dev;
1914 udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
1915
1916 platform_set_drvdata(pdev, udc);
1917
1918 /* Make sure we start from a clean slate */
1919 clk_enable(pclk);
1920 usba_writel(udc, CTRL, 0);
1921 clk_disable(pclk);
1922
1923 INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
1924 usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
1925 usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
1926 usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
1927 for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
1928 struct usba_ep *ep = &usba_ep[i];
1929
1930 ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
1931 ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
1932 ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
1933
1934 list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
1935 }
1936
1937 ret = request_irq(irq, usba_udc_irq, 0, "atmel_usba_udc", udc);
1938 if (ret) {
1939 dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
1940 irq, ret);
1941 goto err_request_irq;
1942 }
1943 udc->irq = irq;
1944
1945 ret = device_add(&udc->gadget.dev);
1946 if (ret) {
1947 dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret);
1948 goto err_device_add;
1949 }
1950
1951 if (pdata && pdata->vbus_pin != GPIO_PIN_NONE) {
1952 if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
1953 udc->vbus_pin = pdata->vbus_pin;
1954
1955 ret = request_irq(gpio_to_irq(udc->vbus_pin),
1956 usba_vbus_irq, 0,
1957 "atmel_usba_udc", udc);
1958 if (ret) {
1959 gpio_free(udc->vbus_pin);
1960 udc->vbus_pin = -1;
1961 dev_warn(&udc->pdev->dev,
1962 "failed to request vbus irq; "
1963 "assuming always on\n");
1964 } else {
1965 disable_irq(gpio_to_irq(udc->vbus_pin));
1966 }
1967 }
1968 }
1969
1970 usba_init_debugfs(udc);
1971 for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
1972 usba_ep_init_debugfs(udc, &usba_ep[i]);
1973
1974 return 0;
1975
1976err_device_add:
1977 free_irq(irq, udc);
1978err_request_irq:
1979 iounmap(udc->fifo);
1980err_map_fifo:
1981 iounmap(udc->regs);
1982err_map_regs:
1983 clk_put(hclk);
1984err_get_hclk:
1985 clk_put(pclk);
1986
1987 platform_set_drvdata(pdev, NULL);
1988
1989 return ret;
1990}
1991
1992static int __exit usba_udc_remove(struct platform_device *pdev)
1993{
1994 struct usba_udc *udc;
1995 int i;
1996
1997 udc = platform_get_drvdata(pdev);
1998
1999 for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
2000 usba_ep_cleanup_debugfs(&usba_ep[i]);
2001 usba_cleanup_debugfs(udc);
2002
2003 if (udc->vbus_pin != -1)
2004 gpio_free(udc->vbus_pin);
2005
2006 free_irq(udc->irq, udc);
2007 iounmap(udc->fifo);
2008 iounmap(udc->regs);
2009 clk_put(udc->hclk);
2010 clk_put(udc->pclk);
2011
2012 device_unregister(&udc->gadget.dev);
2013
2014 return 0;
2015}
2016
2017static struct platform_driver udc_driver = {
2018 .remove = __exit_p(usba_udc_remove),
2019 .driver = {
2020 .name = "atmel_usba_udc",
2021 },
2022};
2023
2024static int __init udc_init(void)
2025{
2026 return platform_driver_probe(&udc_driver, usba_udc_probe);
2027}
2028module_init(udc_init);
2029
2030static void __exit udc_exit(void)
2031{
2032 platform_driver_unregister(&udc_driver);
2033}
2034module_exit(udc_exit);
2035
2036MODULE_DESCRIPTION("Atmel USBA UDC driver");
2037MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
2038MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
new file mode 100644
index 000000000000..f4f0f8bf812c
--- /dev/null
+++ b/drivers/usb/gadget/atmel_usba_udc.h
@@ -0,0 +1,350 @@
1/*
2 * Driver for the Atmel USBA high speed USB device controller
3 *
4 * Copyright (C) 2005-2007 Atmel Corporation
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10#ifndef __LINUX_USB_GADGET_USBA_UDC_H__
11#define __LINUX_USB_GADGET_USBA_UDC_H__
12
13/* USB register offsets */
14#define USBA_CTRL 0x0000
15#define USBA_FNUM 0x0004
16#define USBA_INT_ENB 0x0010
17#define USBA_INT_STA 0x0014
18#define USBA_INT_CLR 0x0018
19#define USBA_EPT_RST 0x001c
20#define USBA_TST 0x00e0
21
22/* USB endpoint register offsets */
23#define USBA_EPT_CFG 0x0000
24#define USBA_EPT_CTL_ENB 0x0004
25#define USBA_EPT_CTL_DIS 0x0008
26#define USBA_EPT_CTL 0x000c
27#define USBA_EPT_SET_STA 0x0014
28#define USBA_EPT_CLR_STA 0x0018
29#define USBA_EPT_STA 0x001c
30
31/* USB DMA register offsets */
32#define USBA_DMA_NXT_DSC 0x0000
33#define USBA_DMA_ADDRESS 0x0004
34#define USBA_DMA_CONTROL 0x0008
35#define USBA_DMA_STATUS 0x000c
36
37/* Bitfields in CTRL */
38#define USBA_DEV_ADDR_OFFSET 0
39#define USBA_DEV_ADDR_SIZE 7
40#define USBA_FADDR_EN (1 << 7)
41#define USBA_EN_USBA (1 << 8)
42#define USBA_DETACH (1 << 9)
43#define USBA_REMOTE_WAKE_UP (1 << 10)
44
45/* Bitfields in FNUM */
46#define USBA_MICRO_FRAME_NUM_OFFSET 0
47#define USBA_MICRO_FRAME_NUM_SIZE 3
48#define USBA_FRAME_NUMBER_OFFSET 3
49#define USBA_FRAME_NUMBER_SIZE 11
50#define USBA_FRAME_NUM_ERROR (1 << 31)
51
52/* Bitfields in INT_ENB/INT_STA/INT_CLR */
53#define USBA_HIGH_SPEED (1 << 0)
54#define USBA_DET_SUSPEND (1 << 1)
55#define USBA_MICRO_SOF (1 << 2)
56#define USBA_SOF (1 << 3)
57#define USBA_END_OF_RESET (1 << 4)
58#define USBA_WAKE_UP (1 << 5)
59#define USBA_END_OF_RESUME (1 << 6)
60#define USBA_UPSTREAM_RESUME (1 << 7)
61#define USBA_EPT_INT_OFFSET 8
62#define USBA_EPT_INT_SIZE 16
63#define USBA_DMA_INT_OFFSET 24
64#define USBA_DMA_INT_SIZE 8
65
66/* Bitfields in EPT_RST */
67#define USBA_RST_OFFSET 0
68#define USBA_RST_SIZE 16
69
70/* Bitfields in USBA_TST */
71#define USBA_SPEED_CFG_OFFSET 0
72#define USBA_SPEED_CFG_SIZE 2
73#define USBA_TST_J_MODE (1 << 2)
74#define USBA_TST_K_MODE (1 << 3)
75#define USBA_TST_PKT_MODE (1 << 4)
76#define USBA_OPMODE2 (1 << 5)
77
78/* Bitfields in EPT_CFG */
79#define USBA_EPT_SIZE_OFFSET 0
80#define USBA_EPT_SIZE_SIZE 3
81#define USBA_EPT_DIR_IN (1 << 3)
82#define USBA_EPT_TYPE_OFFSET 4
83#define USBA_EPT_TYPE_SIZE 2
84#define USBA_BK_NUMBER_OFFSET 6
85#define USBA_BK_NUMBER_SIZE 2
86#define USBA_NB_TRANS_OFFSET 8
87#define USBA_NB_TRANS_SIZE 2
88#define USBA_EPT_MAPPED (1 << 31)
89
90/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
91#define USBA_EPT_ENABLE (1 << 0)
92#define USBA_AUTO_VALID (1 << 1)
93#define USBA_INTDIS_DMA (1 << 3)
94#define USBA_NYET_DIS (1 << 4)
95#define USBA_DATAX_RX (1 << 6)
96#define USBA_MDATA_RX (1 << 7)
97/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
98#define USBA_BUSY_BANK_IE (1 << 18)
99
100/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
101#define USBA_FORCE_STALL (1 << 5)
102#define USBA_TOGGLE_CLR (1 << 6)
103#define USBA_TOGGLE_SEQ_OFFSET 6
104#define USBA_TOGGLE_SEQ_SIZE 2
105#define USBA_ERR_OVFLW (1 << 8)
106#define USBA_RX_BK_RDY (1 << 9)
107#define USBA_KILL_BANK (1 << 9)
108#define USBA_TX_COMPLETE (1 << 10)
109#define USBA_TX_PK_RDY (1 << 11)
110#define USBA_ISO_ERR_TRANS (1 << 11)
111#define USBA_RX_SETUP (1 << 12)
112#define USBA_ISO_ERR_FLOW (1 << 12)
113#define USBA_STALL_SENT (1 << 13)
114#define USBA_ISO_ERR_CRC (1 << 13)
115#define USBA_ISO_ERR_NBTRANS (1 << 13)
116#define USBA_NAK_IN (1 << 14)
117#define USBA_ISO_ERR_FLUSH (1 << 14)
118#define USBA_NAK_OUT (1 << 15)
119#define USBA_CURRENT_BANK_OFFSET 16
120#define USBA_CURRENT_BANK_SIZE 2
121#define USBA_BUSY_BANKS_OFFSET 18
122#define USBA_BUSY_BANKS_SIZE 2
123#define USBA_BYTE_COUNT_OFFSET 20
124#define USBA_BYTE_COUNT_SIZE 11
125#define USBA_SHORT_PACKET (1 << 31)
126
127/* Bitfields in DMA_CONTROL */
128#define USBA_DMA_CH_EN (1 << 0)
129#define USBA_DMA_LINK (1 << 1)
130#define USBA_DMA_END_TR_EN (1 << 2)
131#define USBA_DMA_END_BUF_EN (1 << 3)
132#define USBA_DMA_END_TR_IE (1 << 4)
133#define USBA_DMA_END_BUF_IE (1 << 5)
134#define USBA_DMA_DESC_LOAD_IE (1 << 6)
135#define USBA_DMA_BURST_LOCK (1 << 7)
136#define USBA_DMA_BUF_LEN_OFFSET 16
137#define USBA_DMA_BUF_LEN_SIZE 16
138
139/* Bitfields in DMA_STATUS */
140#define USBA_DMA_CH_ACTIVE (1 << 1)
141#define USBA_DMA_END_TR_ST (1 << 4)
142#define USBA_DMA_END_BUF_ST (1 << 5)
143#define USBA_DMA_DESC_LOAD_ST (1 << 6)
144
145/* Constants for SPEED_CFG */
146#define USBA_SPEED_CFG_NORMAL 0
147#define USBA_SPEED_CFG_FORCE_HIGH 2
148#define USBA_SPEED_CFG_FORCE_FULL 3
149
150/* Constants for EPT_SIZE */
151#define USBA_EPT_SIZE_8 0
152#define USBA_EPT_SIZE_16 1
153#define USBA_EPT_SIZE_32 2
154#define USBA_EPT_SIZE_64 3
155#define USBA_EPT_SIZE_128 4
156#define USBA_EPT_SIZE_256 5
157#define USBA_EPT_SIZE_512 6
158#define USBA_EPT_SIZE_1024 7
159
160/* Constants for EPT_TYPE */
161#define USBA_EPT_TYPE_CONTROL 0
162#define USBA_EPT_TYPE_ISO 1
163#define USBA_EPT_TYPE_BULK 2
164#define USBA_EPT_TYPE_INT 3
165
166/* Constants for BK_NUMBER */
167#define USBA_BK_NUMBER_ZERO 0
168#define USBA_BK_NUMBER_ONE 1
169#define USBA_BK_NUMBER_DOUBLE 2
170#define USBA_BK_NUMBER_TRIPLE 3
171
172/* Bit manipulation macros */
173#define USBA_BF(name, value) \
174 (((value) & ((1 << USBA_##name##_SIZE) - 1)) \
175 << USBA_##name##_OFFSET)
176#define USBA_BFEXT(name, value) \
177 (((value) >> USBA_##name##_OFFSET) \
178 & ((1 << USBA_##name##_SIZE) - 1))
179#define USBA_BFINS(name, value, old) \
180 (((old) & ~(((1 << USBA_##name##_SIZE) - 1) \
181 << USBA_##name##_OFFSET)) \
182 | USBA_BF(name, value))
183
184/* Register access macros */
185#define usba_readl(udc, reg) \
186 __raw_readl((udc)->regs + USBA_##reg)
187#define usba_writel(udc, reg, value) \
188 __raw_writel((value), (udc)->regs + USBA_##reg)
189#define usba_ep_readl(ep, reg) \
190 __raw_readl((ep)->ep_regs + USBA_EPT_##reg)
191#define usba_ep_writel(ep, reg, value) \
192 __raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
193#define usba_dma_readl(ep, reg) \
194 __raw_readl((ep)->dma_regs + USBA_DMA_##reg)
195#define usba_dma_writel(ep, reg, value) \
196 __raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
197
198/* Calculate base address for a given endpoint or DMA controller */
199#define USBA_EPT_BASE(x) (0x100 + (x) * 0x20)
200#define USBA_DMA_BASE(x) (0x300 + (x) * 0x10)
201#define USBA_FIFO_BASE(x) ((x) << 16)
202
203/* Synth parameters */
204#define USBA_NR_ENDPOINTS 7
205
206#define EP0_FIFO_SIZE 64
207#define EP0_EPT_SIZE USBA_EPT_SIZE_64
208#define EP0_NR_BANKS 1
209
210/*
211 * REVISIT: Try to eliminate this value. Can we rely on req->mapped to
212 * provide this information?
213 */
214#define DMA_ADDR_INVALID (~(dma_addr_t)0)
215
216#define FIFO_IOMEM_ID 0
217#define CTRL_IOMEM_ID 1
218
219#ifdef DEBUG
220#define DBG_ERR 0x0001 /* report all error returns */
221#define DBG_HW 0x0002 /* debug hardware initialization */
222#define DBG_GADGET 0x0004 /* calls to/from gadget driver */
223#define DBG_INT 0x0008 /* interrupts */
224#define DBG_BUS 0x0010 /* report changes in bus state */
225#define DBG_QUEUE 0x0020 /* debug request queue processing */
226#define DBG_FIFO 0x0040 /* debug FIFO contents */
227#define DBG_DMA 0x0080 /* debug DMA handling */
228#define DBG_REQ 0x0100 /* print out queued request length */
229#define DBG_ALL 0xffff
230#define DBG_NONE 0x0000
231
232#define DEBUG_LEVEL (DBG_ERR)
233#define DBG(level, fmt, ...) \
234 do { \
235 if ((level) & DEBUG_LEVEL) \
236 printk(KERN_DEBUG "udc: " fmt, ## __VA_ARGS__); \
237 } while (0)
238#else
239#define DBG(level, fmt...)
240#endif
241
242enum usba_ctrl_state {
243 WAIT_FOR_SETUP,
244 DATA_STAGE_IN,
245 DATA_STAGE_OUT,
246 STATUS_STAGE_IN,
247 STATUS_STAGE_OUT,
248 STATUS_STAGE_ADDR,
249 STATUS_STAGE_TEST,
250};
251/*
252 EP_STATE_IDLE,
253 EP_STATE_SETUP,
254 EP_STATE_IN_DATA,
255 EP_STATE_OUT_DATA,
256 EP_STATE_SET_ADDR_STATUS,
257 EP_STATE_RX_STATUS,
258 EP_STATE_TX_STATUS,
259 EP_STATE_HALT,
260*/
261
262struct usba_dma_desc {
263 dma_addr_t next;
264 dma_addr_t addr;
265 u32 ctrl;
266};
267
268struct usba_ep {
269 int state;
270 void __iomem *ep_regs;
271 void __iomem *dma_regs;
272 void __iomem *fifo;
273 struct usb_ep ep;
274 struct usba_udc *udc;
275
276 struct list_head queue;
277 const struct usb_endpoint_descriptor *desc;
278
279 u16 fifo_size;
280 u8 nr_banks;
281 u8 index;
282 unsigned int can_dma:1;
283 unsigned int can_isoc:1;
284 unsigned int is_isoc:1;
285 unsigned int is_in:1;
286
287#ifdef CONFIG_USB_GADGET_DEBUG_FS
288 u32 last_dma_status;
289 struct dentry *debugfs_dir;
290 struct dentry *debugfs_queue;
291 struct dentry *debugfs_dma_status;
292 struct dentry *debugfs_state;
293#endif
294};
295
296struct usba_request {
297 struct usb_request req;
298 struct list_head queue;
299
300 u32 ctrl;
301
302 unsigned int submitted:1;
303 unsigned int last_transaction:1;
304 unsigned int using_dma:1;
305 unsigned int mapped:1;
306};
307
308struct usba_udc {
309 /* Protect hw registers from concurrent modifications */
310 spinlock_t lock;
311
312 void __iomem *regs;
313 void __iomem *fifo;
314
315 struct usb_gadget gadget;
316 struct usb_gadget_driver *driver;
317 struct platform_device *pdev;
318 int irq;
319 int vbus_pin;
320 struct clk *pclk;
321 struct clk *hclk;
322
323 int test_mode;
324 int vbus_prev;
325
326#ifdef CONFIG_USB_GADGET_DEBUG_FS
327 struct dentry *debugfs_root;
328 struct dentry *debugfs_regs;
329#endif
330};
331
332static inline struct usba_ep *to_usba_ep(struct usb_ep *ep)
333{
334 return container_of(ep, struct usba_ep, ep);
335}
336
337static inline struct usba_request *to_usba_req(struct usb_request *req)
338{
339 return container_of(req, struct usba_request, req);
340}
341
342static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget)
343{
344 return container_of(gadget, struct usba_udc, gadget);
345}
346
347#define ep_is_control(ep) ((ep)->index == 0)
348#define ep_is_idle(ep) ((ep)->state == EP_STATE_IDLE)
349
350#endif /* __LINUX_USB_GADGET_USBA_UDC_H */
generated by cgit v1.2.2 (git 2.25.0) at 2024-09-24 22:28:14 -0400