[PATCH] usbcore: port reset for composite devices

This patch (as699) adds usb_reset_composite_device(), a routine for
sending a USB port reset to a device with multiple interfaces owned by
different drivers.  Drivers are notified about impending and completed
resets through two new methods in the usb_driver structure.

The patch modifieds the usbfs ioctl code to make it use the new routine
instead of usb_reset_device().  Follow-up patches will modify the hub,
usb-storage, and usbhid drivers so they can utilize this new API.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

3 files changed, 83 insertions, 5 deletions

diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index b04ede772f2c..df3fb57d71e6 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -823,8 +823,7 @@ static int proc_connectinfo(struct dev_state *ps, void __user *arg)
 
 static int proc_resetdevice(struct dev_state *ps)
 {
-        return usb_reset_device(ps->dev);
-
+        return usb_reset_composite_device(ps->dev, NULL);
 }
 
 static int proc_setintf(struct dev_state *ps, void __user *arg)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index f41c08946a52..37c67d7e8b84 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3007,9 +3007,9 @@ static int config_descriptors_changed(struct usb_device *udev)
  * usb_reset_device - perform a USB port reset to reinitialize a device
  * @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
  *
- * WARNING - don't reset any device unless drivers for all of its
- * interfaces are expecting that reset!  Maybe some driver->reset()
- * method should eventually help ensure sufficient cooperation.
+ * WARNING - don't use this routine to reset a composite device
+ * (one with multiple interfaces owned by separate drivers)!
+ * Use usb_reset_composite_device() instead.
  *
  * Do a port reset, reassign the device's address, and establish its
  * former operating configuration.  If the reset fails, or the device's
@@ -3125,3 +3125,81 @@ re_enumerate:
         hub_port_logical_disconnect(parent_hub, port1);
         return -ENODEV;
 }
+
+/**
+ * usb_reset_composite_device - warn interface drivers and perform a USB port reset
+ * @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
+ * @iface: interface bound to the driver making the request (optional)
+ *
+ * Warns all drivers bound to registered interfaces (using their pre_reset
+ * method), performs the port reset, and then lets the drivers know that
+ * the reset is over (using their post_reset method).
+ *
+ * Return value is the same as for usb_reset_device().
+ *
+ * The caller must own the device lock.  For example, it's safe to use
+ * this from a driver probe() routine after downloading new firmware.
+ * For calls that might not occur during probe(), drivers should lock
+ * the device using usb_lock_device_for_reset().
+ *
+ * The interface locks are acquired during the pre_reset stage and released
+ * during the post_reset stage.  However if iface is not NULL and is
+ * currently being probed, we assume that the caller already owns its
+ * lock.
+ */
+int usb_reset_composite_device(struct usb_device *udev,
+                struct usb_interface *iface)
+{
+        int ret;
+        struct usb_host_config *config = udev->actconfig;
+
+        if (udev->state == USB_STATE_NOTATTACHED ||
+                        udev->state == USB_STATE_SUSPENDED) {
+                dev_dbg(&udev->dev, "device reset not allowed in state %d\n",
+                                udev->state);
+                return -EINVAL;
+        }
+
+        if (iface && iface->condition != USB_INTERFACE_BINDING)
+                iface = NULL;
+
+        if (config) {
+                int i;
+                struct usb_interface *cintf;
+                struct usb_driver *drv;
+
+                for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+                        cintf = config->interface[i];
+                        if (cintf != iface)
+                                down(&cintf->dev.sem);
+                        if (device_is_registered(&cintf->dev) &&
+                                        cintf->dev.driver) {
+                                drv = to_usb_driver(cintf->dev.driver);
+                                if (drv->pre_reset)
+                                        (drv->pre_reset)(cintf);
+                        }
+                }
+        }
+
+        ret = usb_reset_device(udev);
+
+        if (config) {
+                int i;
+                struct usb_interface *cintf;
+                struct usb_driver *drv;
+
+                for (i = config->desc.bNumInterfaces - 1; i >= 0; --i) {
+                        cintf = config->interface[i];
+                        if (device_is_registered(&cintf->dev) &&
+                                        cintf->dev.driver) {
+                                drv = to_usb_driver(cintf->dev.driver);
+                                if (drv->post_reset)
+                                        (drv->post_reset)(cintf);
+                        }
+                        if (cintf != iface)
+                                up(&cintf->dev.sem);
+                }
+        }
+
+        return ret;
+}
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index b7fdc1cd134a..515310751303 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1207,6 +1207,7 @@ EXPORT_SYMBOL(usb_ifnum_to_if);
 EXPORT_SYMBOL(usb_altnum_to_altsetting);
 
 EXPORT_SYMBOL(usb_reset_device);
+EXPORT_SYMBOL(usb_reset_composite_device);
 
 EXPORT_SYMBOL(__usb_get_extra_descriptor);