USB: serial: sierra driver bug fix for composite interface

This patch fixes a problem in sierra_send_setup() function when
composite devices are used. One should not be sending ACM commands to
interfaces that are OBEX. Doing this causes an apparent failure as the
ACM command has to time out before the interface can start being used.

Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 17 insertions, 4 deletions

diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index d9bf9a5c20ec..7da3775a097e 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -14,7 +14,7 @@
   Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 */
 
-#define DRIVER_VERSION "v.1.3.2"
+#define DRIVER_VERSION "v.1.3.3"
 #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
 #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
 
@@ -259,9 +259,21 @@ static int sierra_send_setup(struct tty_struct *tty,
                         val |= 0x02;
 
                 /* If composite device then properly report interface */
-                if (serial->num_ports == 1)
+                if (serial->num_ports == 1) {
                         interface = sierra_calc_interface(serial);
 
+                        /* Control message is sent only to interfaces with
+                         * interrupt_in endpoints
+                         */
+                        if (port->interrupt_in_urb) {
+                                /* send control message */
+                                return usb_control_msg(serial->dev,
+                                        usb_rcvctrlpipe(serial->dev, 0),
+                                        0x22, 0x21, val, interface,
+                                        NULL, 0, USB_CTRL_SET_TIMEOUT);
+                        }
+                }
+
                 /* Otherwise the need to do non-composite mapping */
                 else {
                         if (port->bulk_out_endpointAddress == 2)
@@ -270,12 +282,13 @@ static int sierra_send_setup(struct tty_struct *tty,
                                 interface = 1;
                         else if (port->bulk_out_endpointAddress == 5)
                                 interface = 2;
-                }
 
-                return usb_control_msg(serial->dev,
+                        return usb_control_msg(serial->dev,
                                 usb_rcvctrlpipe(serial->dev, 0),
                                 0x22, 0x21, val, interface,
                                 NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+                }
         }
 
         return 0;