whiteheat: coding style

Bring ezusb and whiteheat into line with the coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 51 insertions, 27 deletions

diff --git a/drivers/usb/serial/whiteheat.h b/drivers/usb/serial/whiteheat.h
index f16079705664..38065df4d2d8 100644
--- a/drivers/usb/serial/whiteheat.h
+++ b/drivers/usb/serial/whiteheat.h
@@ -2,7 +2,7 @@
  * USB ConnectTech WhiteHEAT driver
  *
  *      Copyright (C) 2002
- *          Connect Tech Inc.   
+ *          Connect Tech Inc.
  *
  *      Copyright (C) 1999, 2000
  *          Greg Kroah-Hartman (greg@kroah.com)
@@ -12,7 +12,8 @@
  *      the Free Software Foundation; either version 2 of the License, or
  *      (at your option) any later version.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
  *
  */
 
@@ -30,13 +31,16 @@
 #define WHITEHEAT_DUMP                  7       /* dump memory */
 #define WHITEHEAT_STATUS                8       /* get status */
 #define WHITEHEAT_PURGE                 9       /* clear the UART fifos */
-#define WHITEHEAT_GET_DTR_RTS           10      /* get the state of DTR and RTS for a port */
-#define WHITEHEAT_GET_HW_INFO           11      /* get EEPROM info and hardware ID */
+#define WHITEHEAT_GET_DTR_RTS           10      /* get the state of DTR and RTS
+                                                        for a port */
+#define WHITEHEAT_GET_HW_INFO           11      /* get EEPROM info and
+                                                        hardware ID */
 #define WHITEHEAT_REPORT_TX_DONE        12      /* get the next TX done */
 #define WHITEHEAT_EVENT                 13      /* unsolicited status events */
-#define WHITEHEAT_ECHO                  14      /* send data to the indicated IN endpoint */
-#define WHITEHEAT_DO_TEST               15      /* perform the specified test */
-#define WHITEHEAT_CMD_COMPLETE          16      /* reply for certain commands */
+#define WHITEHEAT_ECHO                  14      /* send data to the indicated
+                                                   IN endpoint */
+#define WHITEHEAT_DO_TEST               15      /* perform specified test */
+#define WHITEHEAT_CMD_COMPLETE          16      /* reply for some commands */
 #define WHITEHEAT_CMD_FAILURE           17      /* reply for failed commands */
 
 
@@ -67,20 +71,28 @@ struct whiteheat_simple {
 #define WHITEHEAT_PAR_MARK      '1'     /* mark (force 1) parity */
 
 #define WHITEHEAT_SFLOW_NONE    'n'     /* no software flow control */
-#define WHITEHEAT_SFLOW_RX      'r'     /* XOFF/ON is sent when RX fills/empties */
-#define WHITEHEAT_SFLOW_TX      't'     /* when received XOFF/ON will stop/start TX */
+#define WHITEHEAT_SFLOW_RX      'r'     /* XOFF/ON is sent when RX
+                                           fills/empties */
+#define WHITEHEAT_SFLOW_TX      't'     /* when received XOFF/ON will
+                                           stop/start TX */
 #define WHITEHEAT_SFLOW_RXTX    'b'     /* both SFLOW_RX and SFLOW_TX */
 
 #define WHITEHEAT_HFLOW_NONE            0x00    /* no hardware flow control */
-#define WHITEHEAT_HFLOW_RTS_TOGGLE      0x01    /* RTS is on during transmit, off otherwise */
-#define WHITEHEAT_HFLOW_DTR             0x02    /* DTR is off/on when RX fills/empties */
-#define WHITEHEAT_HFLOW_CTS             0x08    /* when received CTS off/on will stop/start TX */
-#define WHITEHEAT_HFLOW_DSR             0x10    /* when received DSR off/on will stop/start TX */
-#define WHITEHEAT_HFLOW_RTS             0x80    /* RTS is off/on when RX fills/empties */
+#define WHITEHEAT_HFLOW_RTS_TOGGLE      0x01    /* RTS is on during transmit,
+                                                   off otherwise */
+#define WHITEHEAT_HFLOW_DTR             0x02    /* DTR is off/on when RX
+                                                   fills/empties */
+#define WHITEHEAT_HFLOW_CTS             0x08    /* when received CTS off/on
+                                                   will stop/start TX */
+#define WHITEHEAT_HFLOW_DSR             0x10    /* when received DSR off/on
+                                                   will stop/start TX */
+#define WHITEHEAT_HFLOW_RTS             0x80    /* RTS is off/on when RX
+                                                   fills/empties */
 
 struct whiteheat_port_settings {
         __u8    port;           /* port number (1 to N) */
-        __u32   baud;           /* any value 7 - 460800, firmware calculates best fit; arrives little endian */
+        __u32   baud;           /* any value 7 - 460800, firmware calculates
+                                   best fit; arrives little endian */
         __u8    bits;           /* 5, 6, 7, or 8 */
         __u8    stop;           /* 1 or 2, default 1 (2 = 1.5 if bits = 5) */
         __u8    parity;         /* see WHITEHEAT_PAR_* above */
@@ -167,12 +179,14 @@ struct whiteheat_echo {
  */
 #define WHITEHEAT_TEST_UART_RW          0x01  /* read/write uart registers */
 #define WHITEHEAT_TEST_UART_INTR        0x02  /* uart interrupt */
-#define WHITEHEAT_TEST_SETUP_CONT       0x03  /* setup for PORT_CONT/PORT_DISCONT */
+#define WHITEHEAT_TEST_SETUP_CONT       0x03  /* setup for
+                                                PORT_CONT/PORT_DISCONT */
 #define WHITEHEAT_TEST_PORT_CONT        0x04  /* port connect */
 #define WHITEHEAT_TEST_PORT_DISCONT     0x05  /* port disconnect */
 #define WHITEHEAT_TEST_UART_CLK_START   0x06  /* uart clock test start */
 #define WHITEHEAT_TEST_UART_CLK_STOP    0x07  /* uart clock test stop */
-#define WHITEHEAT_TEST_MODEM_FT         0x08  /* modem signals, requires a loopback cable/connector */
+#define WHITEHEAT_TEST_MODEM_FT         0x08  /* modem signals, requires a
+                                                loopback cable/connector */
 #define WHITEHEAT_TEST_ERASE_EEPROM     0x09  /* erase eeprom */
 #define WHITEHEAT_TEST_READ_EEPROM      0x0a  /* read eeprom */
 #define WHITEHEAT_TEST_PROGRAM_EEPROM   0x0b  /* program eeprom */
@@ -198,19 +212,27 @@ struct whiteheat_test {
 #define WHITEHEAT_EVENT_CONNECT         0x08    /* connect field is valid */
 
 #define WHITEHEAT_FLOW_NONE             0x00    /* no flow control active */
-#define WHITEHEAT_FLOW_HARD_OUT         0x01    /* TX is stopped by CTS (waiting for CTS to go on) */
-#define WHITEHEAT_FLOW_HARD_IN          0x02    /* remote TX is stopped by RTS */
-#define WHITEHEAT_FLOW_SOFT_OUT         0x04    /* TX is stopped by XOFF received (waiting for XON) */
-#define WHITEHEAT_FLOW_SOFT_IN          0x08    /* remote TX is stopped by XOFF transmitted */
+#define WHITEHEAT_FLOW_HARD_OUT         0x01    /* TX is stopped by CTS
+                                                  (waiting for CTS to go on) */
+#define WHITEHEAT_FLOW_HARD_IN          0x02    /* remote TX is stopped
+                                                  by RTS */
+#define WHITEHEAT_FLOW_SOFT_OUT         0x04    /* TX is stopped by XOFF
+                                                  received (waiting for XON) */
+#define WHITEHEAT_FLOW_SOFT_IN          0x08    /* remote TX is stopped by XOFF
+                                                  transmitted */
 #define WHITEHEAT_FLOW_TX_DONE          0x80    /* TX has completed */
 
 struct whiteheat_status_info {
         __u8    port;           /* port number (1 to N) */
-        __u8    event;          /* indicates what the current event is, see WHITEHEAT_EVENT_* above */
-        __u8    modem;          /* modem signal status (copy of uart's MSR register) */
+        __u8    event;          /* indicates what the current event is,
+                                        see WHITEHEAT_EVENT_* above */
+        __u8    modem;          /* modem signal status (copy of uart's
+                                        MSR register) */
         __u8    error;          /* line status (copy of uart's LSR register) */
-        __u8    flow;           /* flow control state, see WHITEHEAT_FLOW_* above */
-        __u8    connect;        /* 0 means not connected, non-zero means connected */
+        __u8    flow;           /* flow control state, see WHITEHEAT_FLOW_*
+                                        above */
+        __u8    connect;        /* 0 means not connected, non-zero means
+                                        connected */
 };
 
 
@@ -256,7 +278,8 @@ struct whiteheat_hw_info {
 struct whiteheat_event_info {
         __u8    port;           /* port number (1 to N) */
         __u8    event;          /* see whiteheat_status_info.event */
-        __u8    info;           /* see whiteheat_status_info.modem, .error, .flow, .connect */
+        __u8    info;           /* see whiteheat_status_info.modem, .error,
+                                        .flow, .connect */
 };
 
 
@@ -269,7 +292,8 @@ struct whiteheat_event_info {
 
 struct whiteheat_test_info {
         __u8    port;           /* port number (1 to N) */
-        __u8    test;           /* indicates which test this is a response for, see WHITEHEAT_DO_TEST above */
+        __u8    test;           /* indicates which test this is a response for,
+                                   see WHITEHEAT_DO_TEST above */
         __u8    status;         /* see WHITEHEAT_TEST_* above */
         __u8    results[32];    /* test-dependent results */
 };