usb: kill prehistorical comments about USB_EHCI_HCD

Remove old comments about USB_EHCI_HCD.

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 1 insertions, 4 deletions

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2c63bfb1f8d9..c1cfed7eefb5 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -24,10 +24,7 @@ config USB_EHCI_HCD
           The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
           "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
           If your USB host controller supports USB 2.0, you will likely want to
-          configure this Host Controller Driver.  At the time of this writing, 
-          the primary implementation of EHCI is a chip from NEC, widely available
-          in add-on PCI cards, but implementations are in the works from other 
-          vendors including Intel and Philips.  Motherboard support is appearing.
+          configure this Host Controller Driver.
 
           EHCI controllers are packaged with "companion" host controllers (OHCI
           or UHCI) to handle USB 1.1 devices connected to root hub ports.  Ports