USB: ehci-s5p: add DMA burst support

DMA burst support is added to improve performance in EHCI data
transfer. The USB EHCI controller on Exynos SoCs can use INCR16,
INCR8, and INCR4 mode. These modes of INSNREG00 register should
be set in order to enable DMA burst transfer. This feature is
also related to AHB spec.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Sangwook Lee <sangwook.lee@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 15 insertions, 0 deletions

diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 293f7412992e..f098e2a291a0 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -17,6 +17,15 @@
 #include <plat/ehci.h>
 #include <plat/usb-phy.h>
 
+#define EHCI_INSNREG00(base)                    (base + 0x90)
+#define EHCI_INSNREG00_ENA_INCR16               (0x1 << 25)
+#define EHCI_INSNREG00_ENA_INCR8                (0x1 << 24)
+#define EHCI_INSNREG00_ENA_INCR4                (0x1 << 23)
+#define EHCI_INSNREG00_ENA_INCRX_ALIGN          (0x1 << 22)
+#define EHCI_INSNREG00_ENABLE_DMA_BURST \
+        (EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 | \
+         EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN)
+
 struct s5p_ehci_hcd {
         struct device *dev;
         struct usb_hcd *hcd;
@@ -128,6 +137,9 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev)
         ehci->regs = hcd->regs +
                 HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase));
 
+        /* DMA burst Enable */
+        writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
+
         dbg_hcs_params(ehci, "reset");
         dbg_hcc_params(ehci, "reset");
 
@@ -234,6 +246,9 @@ static int s5p_ehci_resume(struct device *dev)
         if (pdata && pdata->phy_init)
                 pdata->phy_init(pdev, S5P_USB_PHY_HOST);
 
+        /* DMA burst Enable */
+        writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
+
         if (time_before(jiffies, ehci->next_statechange))
                 msleep(100);